NB100 RAM to 2 GB upgrade

Similar Questions

• DDR4 Ram how can I upgrade worms in my Acer Aspire E5-553-14 year and how many ram slots is there?

  DDR4 Ram how can I upgrade worms in my Acer Aspire E5-553-14 year and how many ram slots is there?

  Thanks for all the help Brummyfan.

• iMac 24 "early 2009. 4 GB of RAM to 8 GB upgrade?

  I have an Apple iMac 24 "early 2009, 2.66 GHz Intel Core 2Duo, NVIDIA GeForce 9400 256 MB.  Memory 4 GB 1067 MHz DDR3, but I would like to upgrade. I just install OS X El Capitan and having been informed that a RAM upgrade is a good idea?  Eager 2 x 4 GB (8 GB) of RAM.  I would like to know one) is that a good idea? and (b) where can I get quality from a reputable provider RAM as there is a gap of GBP £30-£40 cost online.  I live in England.

  The upgrade to run El Cap is a great idea. Buy quality ram Crucial http://www.crucial.com/ or OWC http://eshop.macsales.com/

  Expedition to the France can do direct purchase OWC too expensive, but you can find their ram at Amazon.

• Portege R500 - RAM and disk SSD upgrade

  Hello

  I have a PORTEGE R500 bought in 2007, SERIES NO.48025469H.

  I have obvious problems with VISTA and WINDOWS 7. The two do not work well, because he seems to have a memory. I wonder if I can increase the memory and replace the drive with an SSD. I want to keep this laptop because it is perfect for all my needs.

  Thank you

  Message was edited: assignment has been translated

  Hello

  According to the specifications of the laptop your laptop can handle with GB of RAM, but has been bundled with 2 GB memory is not possible.
  http://www.Toshiba.it/discontinued-p...Tege-R500-11z/

  What about SSD? SSD upgrade is possible and you can use 256GB SSD for upgrade. After this system will be much faster, and you will certainly more performance and speed.

• NB100 black screen after memory upgrade

  My NB100 works well with the Samsung 1 GB of memory which was included when I bought it, but when I replaced the screen with a new Kingston 2 GB 667 MHz (2 G/VR667D2S5) doesn't show anything when I turn on the laptop back, even if the LED indicators seem normal and fans inside its normal.

  I tried a replacement memory (same type of Kingston) - still no luck. I put the old Samsung back and the laptop starts fine.

  Any ideas?

  Hey Buddy,

  What NB100 you have exactly? What is the number of exact part of it?

  AFAIK NB100 supports only 2 GB of RAM. This means that you can install the module of 1 GB in each slot, but not a 2 GB RAM module will not work.

  So, if you want only 2 GB of RAM, you will need to purchase an additional 1 GB module because the NB has two memory slots.

• Pavilion g6 - 2217cl: the HP Pavilion g6 - 2217cl RAM and CPU/GPU upgrade

  Hey there, I am looking to upgrade the RAM and CPU/GPU on my G6 Pavilion. Here's my current characteristics;

  Laptop model: HP Pavilion G6 - 2217cl

  Operating system: Windows 10 family (x 64)

  Current RAM: 6 GB (used 2 slots)

  CPU/GPU: AMD A8 - 4500 APU with Radeon HD graphics card

  What are the possibilities should I upgrade?

  If more information is needed, I'll be happy to provide.

  It supports up to 8 GB of memory and the processor can be upgraded to a 10 - 4600M. Here is the Manual:

  Manual

  There is no video card to upgrade, but for the models of series AMD A video is contained in the processor itself and an upgrade of the processor also carries with it an upgrade for HD 7640 G HD 7660 G video. It's light but a bit noticeable and clock speed go from 2.8 ghz to 3.2 ghz, which is not huge but noticeable. Memory is a DDR3-1600 module, and you can replace your 2 gig with a 4 gig to spend 6 to 8.

  Memory upgrade is as easy as... CPU/APU don't upgrade not so much.

  4 GB PC3 12800 1600 MHz shared 641369-001

  http://www.Amazon.com/HP-641369-001-1600Mhz-PC3-12800-memory/DP/B008L325TW?ie=UTF8 & Keywords = 641369-001 & qid = 1465472116 & ref_ = sr_1_2 & SR = 8-2

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• RAM Satellite M70-337 upgrade

  Please, someone give me link to the more detailed post on the RAM upgrade.
  I want to do on my own, so I need to know the charges when his replacement.

  Thank you

  Hi, I upgraded my ram from a good website post at least 2 or 3 days (free shipping) a website called http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=23230&ft=m&st=3 this is the page you can find your model you can buy all the RAM modules on this subject, I ordered from him and it comes with a guide on how to assemble your kit but (sorry!) it does not come where your location If in your pc you will need Explorer through your laptop.

  Hope this helps

  ^ Laptop_man ^.

• Compaq Presario C731TU: RAM and CPU max UPGRADE Presario C731tu chipset GLS960 cpusocket PPGA478 RAM and CPU max UPGRADE

  Hi all!

  I have a Compaq Presario C731TU I absolutely need to upgrade its opportunities top of page. I discovered that he could run processor family Intel core 2 duo, and celeron family, that sounds really good!

  Then consulted taken PPGA478 processors on the site of intel with their processor feature filter (http://ark.intel.com/search/advanced?s=t&FamilyText=Legacy%20Intel%C2%AE%20Core%E2%84%A22%20Processo...)   the best option seems to be Intel® Core™ 2 Duo Processor T9500 (2.60 GHz, 800 MHz FSB, 6 MB Cache).

  My question is:

  Is there another cpu option better? Inside of a forum, I read that it can withstand up to Intel C2D T9xxx family but after T9500 (e.g. T9600 or T9900) taking turns into PGA478 and not PPGA478. What is the difference between PPGA478 and PGA478? are they the same or not?

  Are there limits on the CPU with the BIOS upgrade? (mine is upgrated to F34 which should be the latest version)

  About RAM: this laptop should work max 2 GB of ram but in fact I use it with 3 GB of ram (with these config.: 1 GB on the inner slot and 2 GB on the external, the inverse solution does not work, can not guess why), but someone "found a way" to use the 2 banks of 2 GB 4 GB total (and if according with this http://www.intel.com/Assets/PDF/specupdate/316274.pdf - pag. 19 - should be quite possible) , what ram 2x2gb modules can be accepted if? Help me = S

  Thank you very much in advance!

  I opened the laptop and the chipset inside the computer, wirtten there is an INTEL GL 960 who should manage only 553 mhz FSB... But... I installed inside, as the core 2 duo t9300, which has 800 Mhz FSB and it is fully functional in frequency from 800 Mhz to FSB. Really good news =)

  AIDA 64 tool (former Everest) shows the FSB of GL960 chipset can run on 533, 667 and 800 Mhz frequency.

• HP 15-d045nr: how to decide what ram to choose for upgrade?

  I have a HP 15-d045nr - and I'm looking to upgrade the RAM.  I'm looking for the essential site and its gives me four different options, how to choose which one is best?  Its a small price difference... Thanks for the help in advance.

  http://www.crucial.com/USA/en/compatible-upgrade-for//HP-15-d045nr-TouchSmart

  Edit: Im also open to places other than this website, no matter what, would be preferable.

  Hello

  Crucial does not give you a complete picture. Yes, your machine uses normal i3 processor so it supports 16 GB of RAM (8GB slot) and still only once 1333 MHz or 1600 MHz RAM because the CPU supports only those:

  http://Ark.Intel.com/products/65700/Intel-Core-i3-3110M-processor-3M-cache-2_40-GHz

  Kind regards.

• The RAM and HARD drive upgrade

  Hello

  I put my laptop, at level

  8.1 Windows 64-bit, Intel Core i7-4700MP @ 2.40 GHz

  Currently 12 GB of Ram - 8 GB & 4 GB Kingston DDR3

  Currently 1 TB Toshiba HDD
  http://storage.Toshiba.EU/CMS/en/HDD/computing/product_detail.jsp?ProductID=409

  I'm looking to upgrade the 4 GB of RAM to a 8 GB, I just don't know how many pins each room has. Any guidance where to find this without disassembling the machine would be very handy! -I think it's a 204pin?

  Also looking to add a second hard drive on my machine, what is the maximum size that can take this laptop? Ideally I'd like an another 1 TB HDD (same brand) than my current. Is this possible? Then the hard drives of 1 TB overprinting two system?

  EDIT: Is it possible to have the other as an SSD? Although that can't really benefits to have as a slave instead of a master drive.

  Thank you very much

  Dan

  Hello

  Manual - Page 2

  Plug

  RAM: Yes, 204pin SODIMM SDRAM desired. You can buy the memory stick to the exact configuration & preference even brand that is already installed on your computer laptop & listed in the service manual, so that it works correctly.

  Configuration of the RAM: 8 GB DDR3L 1600 MHz PC3L-12800 1.35v SODIMM SDRAM

  Run this tool to know the configuration & Details of RAM already installed.

  Page 51 details the procedure of replacement, fairly simple.

  HDD: According to the manual, it has double drive HARD support. You can put another 1 TB 2.5 inch 9.5 mm SATA HDD. You can buy additonal material of hard drive Kit (HP PRTs number: 720237-001) to install on secondary Bay for data storage.

  I would have preferred a faster 7200 RPM HARD drive with the cache higher like this , if you want more storage.

  Alternatively, you can replace the current HDD with SSD of similar form factor (2.5 inches SATA 7 mm or 9.5 mm thick) and make as boot drive by moving the drive toward SSD HARD integer before replacement & put old HDD to secondary storage Bay. SSD would defintely thrust upward performance drastically, but they are expensive - I would say worth the cost.

  Page 48-50 details the replacement procedure. Its relatively simple to do.

  Concerning

  Visruth

• Pavilion dv3507ea 64 bits - RAM (and Win 7) upgrade

  Hello, this is a long time since I've posted here... on a backlit keyboard on my dv3507.  The topic is still underway nearly two years later!

  I move to win7 (maybe I should of taken advantage of upgrade offers on this site some time ago).  As well as the upgrade to Win7 I increase the ram.  Currently I have 2048 and mounted a 1024 module - i.e. the two slots in the populous 3507.  I intend to replace the 1024 2048 module to give me 4 GB.  I know the improvement will be negligible, but I'm always happy to throw money at it...

  In the manual of the computer it says it is 6400 667 ddr2 sodimm.  I ran various "analyzers" including crucial and he says that it is 6400 800.  I checked the bios and the HP system tools to see if it tells me that the clock speed of the memory installed but it does not show anywhere.  I don't know whether to believe memory manual crucial analysor tool... and at least 2 other tools who say it is 6400-800.  Only the manual says that it is 6400-667.

  I'm pretty sure that 667 and 800 can be appointed, but with the 800 synchronizing to the slower speed (667).

  Has anyone here upgraded their ram?  If so did you use mixed speeds?  All the problems?  And all the problems on the upgrade of the dv3507ea for Win 7?

  TKS in advance.

  Phil

  Your laptop can be upgraded to windows 7 64 bit without any problems. You can download the drivers for your hardware on here.

  To clear the confusion, in theory, when different speed RAM modules are used, all of the RAM should clock at the speed of the slowest module (usually you can see what kind of limitation only on Intel systems).

  Your laptop supports 667 and 800 Mhz clock speed, and it wouldn't cause a problem if you use mixed speed memory modules but I suggest you use all the same memory sticks with clock even to get optimal performance speeds.

• I have a Satellite M40-193: what kind of ram I need to upgrade?

  I mean, I don't know how many locations is available here in my laptop and how I can update, I would like to add 1 GB. What kind of ram do need me exactly?

  Hello

  I used advanced search of this forum and found these threads on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13887&MessageID=50613
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13944&MessageID=50874

  Each laptop M40 series use the same modules of memory.

• Care module RAM that requires an upgrade to a Satellite A100-014

  The A100-014 that I has two RAM slots (dual mode).
  There is a 1024 MB DDR2 PC2 4300 (266 MHz) in slot 1.

  I would use the slot 2 for a RAM module that I got from my old Asus computer which is a 512 MB PC2 4200 s. You think it's compatible?

  Thanks a lot for your valuable advice in advance.

  Pierfrancesco, Rome, Italy

  Hi pierfrancesco,.

  I see that my clue has been useful for you with this screwdriver and etc...
  So, I can give you a second suggestion? :)
  It would be preferable to use a similar memorymodule due to compatibility issues. OK, no one said it wouldn't work, but it is possible that the different timings are some question about the stability of your system. So, try if it works. If Yes, then try for a few days, and if you haven´t then after these days of problems with the stability of your system, then you know everythings fine.

  Just one more time: Don t worry, your machine won´t get broken if you insert the second module. If it works, doesn´t, then the module would not be recognized ot some...

  Welcome them

  :)

• What is the best RAM for Tecra A3 upgrades

  Hello

  What are the type of RAM I can install safely in my Tecra A3 better/faster?

  I ran a test with 'CPU - Z', and it tells me I have a 512 MB of memory, having sat on the #1 slot, type DDR1/PC2700 / 166 mHz.

  I would like to have at least 1 gigabyte of memory, but I'm not sure of the following:
  1: the motherboard supports DDR-2 RAM or DDR-1 to faster bus speeds (566, 333 or even at 800 mHz)?
  2: can I install another type of memory alongside the current (see above question)?
  3: make a performance gain by having all the RAM in one slot/block, or vice versa?

  Thanks for the replies!

  Bjørn N. Nielsen

  Hello

  This utility is not known to be, but I think that it provides the right information.
  You know the software "Everest"? It is a hardware diagnostic application. It's not bad.

  In my opinion, you should use the RAM modules recommended by Toshiba. In my opinion, you will get the best performance with these modules.
  I found a few compatible modules:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

  It seems that these modules are SO-DIMM 200 pin - DDR 333 MHz.
  In my opinion, you need to buy a 1 GB and use it in the slot one.
  In the future you can easily switch from the laptop to 2 GB

• Satellite Type RAM S1800-814 and upgrade?

  Hello
  I have a Pentium 3 1.1 Ghz Toshiba Satellite S1800-814. Its quite old, well a few years anywho. Since I can't afford a new laptop I do things to speed it up a little.
  As more ram? Its got currently 2 x 128 MB. I was thinking about a 128 MB of Chuck and replacing with a new chip of 256 MB of ram. Back to 384 MB. It would be an ok thing to do, it would make my laptop run a little faster? Im not sure what kind of ram it's also, is it pc100 or pc133? I just get a computer notebook pc100 or pc133 memory and put it in?
  I also noticed that windows says that my ram as 240 MB? Why is this? The bios has never been updated, don't you think not update this can solve the problem and show my ram as being 256 MB as it should right now? Ive heard of people bios update here and the laptop then goes dead, is there a risk of damage to the laptop if I update the bios?

  Thanks for any info, I know Ive asked a lot of questions but I hope someonce can help me.
  Concerning
  Tom

  Tom,

  To answer some of your questions: -.

  1. your noteboook shows only 240 MB of RAM, because 16 MB is reserved for your graphics card. This can show in your BIOS as UMA. If you add the new memory so you can be able to increase this amount to 32 MB or higher.

  2. update your BIOS is relatively simple and reasonably safe. Try to use the Windows method if possible because it avoids having to boot from a floppy drive.
  Make sure that you are on the current (no battery) when you perform the update. The worst case is for the laptop to disabled during the update of the BIOS.
  Finally, make sure you use the update of the correct BIOS from the Toshiba web site. They are model specific.

  3. Turning to the RAM memory modules, I'll try to use compatible modules from a supplier of good quality (such as those provided by Toshiba). Some of the cheaper varieties may not work well (or not at all).
  Check on the Toshiba web site to see what is the maximum RAM that the model will support you and also what part number, you will need. You can then Google for appropriate providers (or makes it compatible) If you want
  Finally, be very careful and avoid any discharge of static electricity, while managing the RAM modules, they can be very easily damaged.

  Good luck