NB100 black screen after memory upgrade

Similar Questions

• NetBook NB100: Black screen after Toshiba leading innovation

  It occurs something strange with my N-100 Netbook.

  It has always worked perfectly, but today, when I try to initiate, it appears on-screen typical 'Innovation leader Toshiba', but then the screen goes black, and do not appear "windows". I hear a sort of high-pitched noise inside your computer.

  I'm not exactly good computers and I tried pressing F2 and look at the different options, but none of them was not like the solution, and I'm afraid I can ruin my computer (I mean, even more) with my computer ignorance.

  Did someone knows what can happen? I'm completely hopeless!

  now fix this = solve my life XD
  Thank you very much!
  Gracies!

  Hello

  Are you able to press F8 while the laptop is turned on?
  To do this and check if you can choose the option repair my computer, then the HARD drive recovery.

  You should also check the BIOS.
  Immediately after pressing the power button, press F2. This allows you to access the BIOS. You can then check if the HARD drive is recognized.

  Sorry mate but it of difficult to say what's wrong here

• NB100 - black screen after removing RAM

  I recently pulled out my RAM blowing my computer (for dust) I put again, and then the computer screen just goes black.
  Ive left it for some time now. How long should I wait?

  Hello

  Usually the laptop must properly initialize after you put the RAM in slots
  Correctly insert you the RAM?

  Also try this:
  Remove the battery and unplug the AC adapter.
  Wait one hour and then reconnect the two parts.

  Then try to turn on the device

• Black screen after the attempt to upgrade to windows 10

  I was trying to upgrade windows 7 on a laptop HP Windows 10. The first attempt was via the white windows logo in the taskbar. This attempt was interrupted, probably accidentally turned off the button wifi trying to move the computer. The second time I tried to use windows ten upgraded Installer. I did the usual download and installed up to 99%. He remained on the installation of 99% during the night and the next morning without change. I turned off the computer and he made a series of updates before shutting down for good. When it starts again, it has a black screen but the cursor is there and movable. I tried in safe mode for the repair and restoration of the system, but it did not work. I tried to reset the BIOS to default, but does not. I try to leave the computer turned off for an extended period of time disconnected from the internet to see if that helps. The last attempt to start, windows 7 seems to start but then ends up on the black screen and I held down the power button to stop it. I'd rather upgrade to windows 10 if possible, but if cannot then if can go back to windows 7 will be enough. It worked great on Windows 7 before trying to upgrade, so there is no problems with the computer.

  Hi Chris,

  I'll be happy to help you with the problem you have with black screen.

  The problem may occur if the video drivers are not updated.

  What is the model of your HP computer?

  I suggest you follow the suggestions by Sharath Srinivasan replied on August 7, 2015, the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Please reply with the results, we are happy to help you.

  Thank you.

• Black screen after upgrading to Windows 10

  I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

  can help me, thanks

  Bill

  Hello

  I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

  I suggest you refer to the suggestion of Sharath Srinivasa on August 7^th, 2015:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• G62 b90 - ev: black screen after Windows loading

  Hello everyone, as you can see by the title I get black screen after loading of Windows at the same time as everything else works (hard drive of fans lights and sounds). I've tried several things, I read on troubleshooting thread, memory, diagnosis, diagnosis of hard drive, delete and change put the Rams, disconnect the battery and ac and keep the power button for 30secs hurry the ac without the battery but nothing. I also tried to use a monitor with hdmi cable but I get a blue screen when I try with the monitor. Also what happens during a format so I can't even through safe mode. IM really waiting for your answers and in the hope of a solution. Thanks in advance!

  Just because you use the key F11 to restore to factory does not mean that the recovery partition itself is not altered.

  Suggest you try instead the recovery discs or take it to the shop for advanced diagnostics.

• HP G60 laptop: black screen after sleep or hibernate Windows10

  Since upgrading from Windows 7 to Windows 10, the laptop displays a black screen after the sleep or hibernate modes.  The system seems to be commissioning (HDD, fan action), but no video.  The system boots normally cold trouble-free starting.  Never, there is this problem with Windows 7.

  Hi @Bobby876,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP G60 laptop and problems with the mode "sleep" after the update to Windows 10. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  You can try:

  In Device Manager, click the arrow

  next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Please let me know how it goes.

  Thank you.

• Corrupt BIOS V5 531 Acer black screen after startup, f2 and f12 also. Repairable?

  Hello

  Yesterday I tried to install Win 7 if I could play D & D Neverwinter on Arc after using * nix systems study (looking to start a career as an administrator). I had plugged into a power strip that was, unbeknownst to me, turned off and I went to make coffee and watch some news. When I came back to check the progress of my laptop was powered off and since then I havn't been avle start without being blocked at a black screen after the start page of the bios. The f2 and f12 also leads to a black screen, I can not change the boot device or enter the bios Setup.

  Is - fixable at all? For example, is the a key-combo, I can use it to restore from a backup bios? Or, do I have to bring in a technician who can install a new chip bios or flash this old some how? Or did I brick pemanently my device?

  V1.22 is what you want to be part of a unit of Windows 7.

  The problem is if it crashed during the upgrade process, it will take some special tools clearly on the chip on the MB and recharge it with a new BIOS. I would contact your local support team to see what options are available.

• Black screen after start - "Video_tdr_failure atikmpag.sys.

  Original title: black screen after startup

  A few days ago I accidentally dropped my laptop I was trying to pick it up. It froze and I used the power button to stop it. The next day, it worked very well, I played a game, but then the screen got all blurry and it froze again. Therefore, whenever I started it normally, I would get a blank screen. But in Safe Mode, it worked fine.

  I assumed it was my hard drive, I got a new and it seemed to work very well, I had reinstalled W7. Until I tried to install the updates and it the screen went white again. I used the system restore and got it to do work. Then decided to move to W10.

  After the upgrade, the pc restarted with a white screen, I have it connected to the TV with an hdmi cable while you try to start it, then the screen worked fine. He stayed very well until I tried to install the updates. It would not just start up. He gave to the page «Video_tdr_failure atikmpag.sys»

  I returned to Windows 7 and now it always starts with a blank screen.

  * the screen works very well throughout the boot process

  And works fine in Safe Mode *.

  Chances are, at least (if not more) there is now a default in the video circuits.

  Be aware, the laptops are very delicate animals.  This type of accident will most often mean end of system life.  The biggest problem is the cost of the repairs in such a situation.  The pieces are almost all owners - read overvalued.  Repairs made by technicians who are not deeply experienced in the setting of your particular brand/model are often insufficiently.  Which leads you onto the OEM repair service that is overvalued.

  The result is that once a laptop is spent on the brand of 3 years, repair of such a system in such circumstances: the replacement more often.

  Well consider a desktop computer type for a replacement.  They are cheaper to begin with, usually more powerful - sometimes by a factor of 2, are easily repairable using components of off - the shelf that are commonly available and one made by several competitors.   Desktop computers usually hold up well almost two times longer.  From an ergonomic point of view, laptops are considered experts machines of 20 minutes.  Use of meaning beyond that time can be bad for your health.

• black screen after the mode standby, windows 8

  I upgraded my laptop HP dv6 to windows 8. I get a black screen after I wake up from sleep mode. as if the monitor has no power.

  In fact, I solved the problem by upgrading my graphics card driver.

  but I was troubled because I thought that it was up-to-date.
  display the properties of the computer - device manager - adapters - NVIDIA GeForce GT 230 M
  I have a click right on NVIDIA GeForce GT 230 M, and then clicked on update driver software. He told me that the driver was updated.
  but I checked the nvidias site. There, I found a newer version.
  It was confusing. Why windows can't find this newer version?

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• Black screen after flashing to latest BIOS

  Nothing but black screen after flashing the latest bios (fan, leds work)...

  I can do, or that of new bios/motherboard can help? (I tried to rest the battery, press F8...) Thanks in advance

  I presume that the BIOS is doomed. What you need is a professional help with this then contact the nearest service provider and ask for help.

  By the way: check this forum using the advanced search option. In the past, I have seen several interesting discussions on BIOS recovery. I m quite skeptical on this subject but maybe you will be lucky and find the solution.

• Black screen after the mode 'sleep'

  My laptop never wakes fashion "Eve" and just keep with the dreaded black screen.

  If anyone has had this problem or have solutions?

  I am currently using a hardware, operating system.

  This message can help,

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DV6-black-screen-after-sleep-mode/TD-p/527033

• Re: Satellite L675-10 t black screen after disassembly problem

  Hi all

  I recently had some problems with my L675-10T overheating, even when I was with a big fan of cooling for the games.

  I realized that the problem resulted from blocked exhaust and dust and it is why, after reading and watching the many tutorials, I opened my laptop computer successfully and all cleaned up.

  The temperature dropped to 20 c and I was happy.

  The next night, however, took my laptop and headed for the living room, and it will stop.
  Black screen and nothing passed. So I ran to the internet and found this solution, it worked btw.

  1. turn off your computer
  2. unplug all wires (including energy)
  3. disconnect the battery from the bottom of the computer.
  4 re - connect the power cable. (the battery should not be in the computer)
  5. turn power on. The screen works. Choose start windows normally. (if you get this screen)

  The thing is, the same thing happened to me this morning as well.
  Twice in 2 days and im a little worried I did something wrong during Assembly of the laptop or something. Any ideas? Or do I keep accountant with the above solution?
  Looks like a mess of power upwards of sorts.

  Thank you in advance.

  Hello

  I assume that this question has not happened before you have disassembled the laptop. Right?
  To be honest this similar issue happened to me to. The portable light not (black screen) after I'm entered in the mode 'sleep'. However, this happened only once

  It s hard to tell why this happened to you it of not impossible that you have damaged something for disassembled the procedure.

  However, the fact is that the warranty is not valid more because you opened the laptop. That is why any approach (especially parts replacement) to solve this problem would cost money.
  So ultimately it s your decision: a technician visit to downtown to see the pieces of equipment or keep your stay with the workaround mentioned above.