Windows XP: Device Manager does not recognize modem?

Similar Questions

• NB250/Device Manager does not recognize webcam

  Hello:

  I have NB250 with Windows 7. There is no indication of a webcam. Device Manager does not recognize it either. I know that there is a download application to search for it on my computer but I don't know where to look for it. Thank you.

  Post edited by: chizuka

  Check if the webcam is enabled in the BIOS.
  To access the press of BIOS F2 when starting the

• W7 Device Manager does not recognize the Intel AMT devices

  Please help: where can I find - how to install the latest drivers Intel AMT for Windows 7.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that the Device Manager does not recognize the Intel AMT devices

  What is the brand and model of the computer?

  Check out these links and see if they help.

  Computers that use Intel's vPro technology can have devices that are not recognized in Windows 7 Device Manager

  http://support.Microsoft.com/kb/976728

  Clean installation WARNING: Back up your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files.

  If your motherboard supports AMT technology, you can download, install the drivers from this link.

  AMT: Intel® AMT Driver for Intel® motherboards

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?&DwnldID=16936

  Note: This download is valid for the products listed below.

  Intel® card mother DB43LD

  Intel® card mother DQ43AP

  Intel® card mother DQ45CB

  Intel® card mother DQ45EK

  If the problem persists, I suggest you to contact Intel support. http://communities.Intel.com/Community/Tech

• Device Manager does not recognize 8600 scanner and therefore not recognized in other applications

  I recently replaced my HP6100 with a HP8600.  A set of software picture Organizer does not recognize the scanner unit and so I can't scan photo to this software.  Printer features work very well, but I can't get the Device Manager to see the device as a device image.  I use Windows 8.1 on a laptop Lenovo Twist/tablet.  Please help me understand what I need to do to get Device Manager to recognize the scanner.

  Thank you!

  Hello

  Sounds like something is missing when installing. Please, download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-129932-1/HPPSdr.exe

  Kind regards.

• Device Manager does not recognize the internal WLAN card

  I have a laptop HP/Compaq Presario V6200CTO which has an internal wifi card. The wifi worked perfectly until about a week ago, when Windows 7 has ceased to recognize the card altogether. I thouhgt first it was a hardware problem and that the card had died and so I bought a USB adapter, but before the arrival of the adapter that I needed to start in SafeMode w/network (I used adapter Linksys a friend). When OS safe mode entered it automatically loaded the driver "Broadcom", installed the wifi device internal and it worked fine while I was in safe mode. After the system restarts the operating system has yet to recognize the internal card. I rebooted in SafeMode once again, but still the card was not recognized. It seems unlikely that a dead card came suddenly to life for the short period of time I was in safe mode, and then quickly died again on restart. Therefore, I think it is an OS problem, but as the map is not displayed in Device Manager I have no idea how to proceed. N USB adapter I bought works fine, but I'd rather be able to use the internal card and free USB port. Is there a way to load the device from the command line or in a way to force the operating system to find the map?

  Lack of maps can often work for short periods. Then, some components overheating or falls down and they stop working.

• HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

  HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

  When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

  Sync Center says not connected and nothing is happening on the computer.

  When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

  I don't see the phone of the link computer to which is connected to the hp laptop.

  the USB port works with my printer.

  What should I try next?   Thanks for your help.

  Hi Bill,

  You can try the following steps and check:

  Method 1:

  Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Method 2:

  If method 1 may not then try the following:

  If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

  If the problem persists, please contact HTC.

  Please post with the State of the question.

• Windows 7 Starter Edition does not recognize a hard drive WD

  Windows 7 Starter Edition does not recognize a hard drive WD, I used until last month. Device Manager sees it, he sees the USB controller (it lists as a mass storage device), but I can't access the information on the hard disk, or make use of the last backup. I tried to uninstall USB drives - it is not the thing. It gets listed under disk drives.

  Thanks for the reply.

  There was no error message: the device has been recognized (listed) by the USB controller and the Device Manager, but not by the management of the disks - so I couldn't access.

  I managed to fix the problem after:

  -J' scanned the computer (DELL Inspiron) with the Safety Scanner
  -J' completely uninstalled all the software associated with an external hard drive
  -J' uninstalled the USB controllers
  -reboot the system
  -reconnected the external HD
  -After gaining access to the drive, I installed the dedicated software

  Best regards

• BlackBerry 8830 smartphones & Desktop Manager does not recognize Outlook Express 2000, cannot sync

  I just installed Desktop Manager 5.0 and connected to my BB 8830.  I use Outlook Express 2000 for the calendar and I want to sync it with my BB 8330.  However, in Desktop Manager under Sync / Config / select the device for the calendar, the only choices are Yahoo and text import/export.  Of course, it does not recognize Outlook Express 2000 as a calendar program.  Does anyone have a solution?

  I bought this 8830 mainly to sync its calendar with my Outlook Express calendar.  If this does not work, then I'll go back to my cell phone operator.

  I installed Desktop Manager 4.1 and it works now.  Be aware with this version, once you connect your BB to your computer, unless you go through the Wizard Windows Found New Hardware, Desktop Manager does not recognize the connection with your BB and your computer (I don't have to do with version 5.0).

  RIM should be more attentive to people with a recent phone, but still using an earlier version of Microsoft Outlook / office.

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• Logical disk management does not recognize a slave drive

  I installed an internal HD as a slave. The BIOS sees the drive, Western Digital Lifeguard sees the drive (it checks OK) with the appropriate drive letter, PMagic sees the drive before starting, but the logical disk manager does not recognize the drive or the drive letter.

  Using Windows XP, SP3 with latest updates

  Hello

  1. The hard drive is recognized in another computer?

  If this isn't the case, then the problem could be the hard drive itself. If he is found, then the problem is in your computer. In this case, run the diskpart.exe utility.

  Use the list partition command and see if the partition is detected. If so, then I suggest you to format the drive in diskpart.

  However, take a return of all data on the hard drive before the format by plugging it into another computer. Help with backup data, see

  Backup: what, how, where

  http://www.Microsoft.com/protect/data/backup/about.aspx

  To use the Diskpart.exe utility, follow these steps:

  1. type diskpartand press ENTER to open the diskpart tool.

  2. type list diskand press ENTER. A list of available hard disks.

  3. type select disk =[n]

  n s Specifies the number of disc the disc to receive the focus.

  4. type list partition

  This command displays the partitions listed in the table to partition on the current drive.
  5. type select partition =[d]

  This command selects the specified partition and gives it the focus.

   d s Specifies the drive letter or mount point path of the partition to receive the focus.

  6. type format drive: / FS: NTFS/Quick

  For more information about commands, see

  A Description of the Diskpart command-line utility

  http://support.Microsoft.com/kb/300415

  Now you should be able to see the slave drive in Solution Explorer.

• Device Manager does not display devices

  Control Panel takes me to the MMC, but Device Manager does not display devices

  Hi Bandjo,

  ·         Device Manager is empty?

  ·         You have made any changes recently?

  ·         You have installed Windows XP Service Pack 3?

  Check to see if this article helps you.

  None of the items appear in the device list manager when you open

• Windows XP Movie Maker does not recognize Canon camera

  Windows XP Movie Maker does not recognize my camera Canon HF R10.  Canon is also not listed as a brand for the digital display when I connect the device to the computer.

  Windows XP Movie Maker does not recognize my camera Canon HF R10.  Canon is also not listed as a brand for the digital display when I connect the device to the computer.

  =========================================
  Movie Maker has been designed to download from mini-DV cameras
  connected with FireWire... (they record at small cassettes... not
  flash drives)

  The best would be to download the video files in a folder on your
  hard drive... convert the WMV movie format and then import
  in Movie Maker.

  If you connect the camera via a cable USB and go to... My computer...
  It should be recognized as a drive. If it's... you can download it from
  there by copy and paste or drag and drop.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Device Manager does not display c or D drive.

  The Windows Device Manager does not display the drives c or d.  With File Explorer, they show and are easily accessible.  What's wrong?

  Hi Alberini,

  You would actually use the Device Manager to determine which devices are installed on your computer, update driver software for your devices, check to see if hardware is working properly and change the hardware settings. You can also use Device Manager to update a driver that does not work properly or restore a driver with its previous version.

  To view the files or the drive hard internal to your computer, would use you Windows Explorer.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• have windows vista and it does not recognize a blank cd - r when inserted

  I have windows vista and it does not recognize a blank cd - r when inserted. I think that it is the drive d. I then put a cd - r with music on it and it does not even recognize them. When I put a game disc in there he reads very well. What is the problem?

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are unable to read CD - r discs on the computer. Please correct me if I misunderstood.

  1. What is the brand and model of the DVD player?

  2. you get any error message?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned below and later a update on the State of the question.

  Method 1: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060

  Please follow these recommended steps and post if you still experience the problem.