NDAS reports an unstable connection and evetually disconnects.

Similar Questions

• NB100 - connects to Wireless G and then disconnects

  Hello

  My laptop connects to our hub Wireless G + B, then after a few minutes reports it is disconnected. If you look at the connections wireless in the text is actually shows that the laptop is connected and at the foot of the "Available wireless connections" dialog box option to disconnect. If you try to navigate away, after all another activity for 5 minutes, it disconnects constantly and you need to reset the connection. No other wireless devices in our House behave like that.

  I use a Netgear DG834PN with A2pB018e.d16f firmware using a key WEP 128 bit (because of some of the older devices that we have). The Atheros AR5007EG driver version 7.6.0.239 a map dated June 27, 2008 installed. Our router confirms that the laptop is attached. I have run through a list of access control is easy to spot if the stuff is connected or not.

  Thanks in advance for any help or pointers to help solve this problem. This issue prevents us the use of the laptop in the way that we want to use it. I can send a screenshot of the dialog wireless connections if you need.

  I looked on the Toshiba site and there I found a newer version of the driver for the card WLAN, 7.6.1.149.1.
  So, try to update the driver and the BIOS too.

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Also make sure you have the new firmware for the router. Check the site of the factory.

• I connect and 4 segundes after it is disconnected

  I connect and 3 segundes after it is disconnected pour what called me

  Sorry, but these forums only provide support in English. Please choose your country here: http://support.microsoft.com/common/international.aspx> click on the arrow language support of your in.

  UTC/GMT is 14:15 on Tuesday, June 12, 2012

• My computer is very slow and takes a long time to connect and disconnect

  Original title: sign out of questions

  My computer is very slow and takes a long time to connect and disconnect. Sometimes I hit Logoff button and do not forget I have more work to do... is it possible to cancel the newspaper once it starts, or should I just wait what he log out completely and then reconnect? (It takes just forever)

  Install the background file. See if it suits it

• Printer constantly connects and disconnects HP Photosmart C7280

  My Photosmart HP all in one C7280 printer is constantly plugging and unplugging. I recently started using my Ethernet connection instead of my wireless connection and that's where the problem started. I've already changed my IP address to a static IP address outside DHCP rang - did not help. I also ran the HP diagnostic utility and it just all right. How can I get my printer to stop the endless cycle of connects / disconnects?

  The printer does actually unplug (her changes of IP address of 0.0.0.0 or 169.254.x.x) during this time, or your computer can't find it?

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• USB Foot Switch triggers them connected and disconnected a beep

  Scythe USB Foot Switch Triple is originally the connected and disconnected beep continuously causing spike lag on my computer. Was started when I downloaded the Logitech software G600 Gaming Mouse on my computer. The pedal is showing as "usb composite device" on my device manager with an exclamation point. When I remove the Logitech Gaming Software the exclamation mark disappears and no beeps.

  Scythe USB Foot Switch Triple is originally the connected and disconnected beep continuously causing spike lag on my computer. Was started when I downloaded the Logitech software G600 Gaming Mouse on my computer. The pedal is showing as "usb composite device" on my device manager with an exclamation point. When I remove the Logitech Gaming Software the exclamation mark disappears and no beeps.

  You must contact probably two manufacturers (Logitech and false) to try to understand if there are newer versions of drivers and known issues.  They can work with you to resolve this conflict.

  A quick look indicates that you'll probably have more luck with Logitech that fake.  :-)

• How to check the details of connection and disconnection of the team? I want to see the rate of use of the software.

  How to check the details of connection and disconnection of the team? I want to see the rate of use of the software.

  Hello

  I'm sorry but there is no option for monitoring the connection and disconnection of a user.

  You can see their activation of license through your admin console.

  Kind regards

  Sheena

• connection and disconnection in adf

  I want to complete step by step tutorial to build the app that has facilities of connection and disconnection. and also I m using bounded task flows with the train.

  Hello

  There are various sources to try:

  To help you get started

  Oracle ADF Security Overview - Oracle JDeveloper 11g R1 and R2

  For an example

  Oracle ADF: Security for all the world

  In addition, the product documentation reading is logical

  http://docs.Oracle.com/CD/E28280_01/Web.1111/b31974/adding_security.htm#BGBGJEAH

  What you can't find in these three sources, let us know.

  Frank

• What is the effect of the "signature of all other computers or devices?  This remove the software from these machines or simply make it unavailable until this as connected and disconnected (e) other machines used CC on?

  Connect failed

  Impossible to sing in on this computer or device.

  The Adobe ID [email protected] has already been used to activate the software on two other computers or devices.

  0 - retry.  I've already signed out of one of them.

  0 - you sign out all other computers or devices.

  What is the effect of this action? @

  just make it unavailable until this as connected and disconnected (e) other machines used CC on?

  That's exactly what disconnect only. No software is removed or otherwise affected on your computer.

  See error 'activation limit reached' or 'connection failed ' | Adobe products

• My creative cloud office disconnection mean! I can't connect and download anything

  My creative cloud office disconnection mean! I can't connect and download anything

  Thanks for your help

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Mylenium

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Problem connecting, Win 7, WPA - PSK (computer think it's WEP). Managed to substitute, but now very unstable connection.

  Hello, I use Windows 7 to my computer. Here wireless signal is encrypted with WPA - PSK TKIP, but my computer could not register as such (he believes that its WEP). I managed to force it to connect, by manually adjusting for WPA - PSK with TKIP (and the correct password) in the control panel.

  However, the connection is extremely unstable. Often, he simply stops working, although the icon says that there is a link. (Note that this window of available connection has a large red cross next to the signal, because he claims that the settings do not match. He just logs occasionally when I start).

  I wonder if there is a way to solve this annoying problem. I don't know what is causing the computer to see the signal as WEP, when it clearly is WPA - PSK.

  Oh, I found what I think, it is the router in the basement: that said on it: Motorola SBS101E.

  PS: I'm not good on the technical stuff (although I understand basic concepts such as network card drivers, etc., don't ask me not to disable or install a protocol without walking me through the steps).

  Thank you!

  As I wrote, your problem is probably related to the adapter wireless in your office. Maybe it's as simple as that requires an updated driver, but it remains to be seen.

  Result of your ipconfig is quite surprising.  Because you are in a university environment, if we cannot identify a problem with your wireless adapter, you may be able to request assistance from the University of the it Department.  See also comments below on the VPN.

  Here - is more as a matter of interest than anything else - what some of your settings mean:

  Wireless network adapter

  • Your card is a Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC (Realtek RTL8188CE 1 x 1 11 b/g/n Wireless LAN PCI Express Half Mini Card Adapter, which seems to be installed on Lenovo ThinkPads).
  • Your card is automatically assigned (usually by the wireless router, but see below) an IP address of 10.92.129.20.  This address is part of what is called a 'Class A' network, which is generally only used by very large organizations (for example, a University).  This suggests that this wireless network is from University wireless access point rather than a router connected to the modem cable into your basement.

    So it is possible that the antenna on your desktop computer wireless card is not in as good a place as your laptop computer to receive the signal. It's especially if your office uses a built-in wireless adapter, with the antenna at the back of the computer under a desk and near a wall. If you try USB wireless adapter for your desktop computer (or an antenna on an extension cord) move the antenna near a window, if possible.

  • The 'default gateway' for this connection (the address of the wireless router) is 10.92.128.1, which is in the same class A network.
  • The DHCP server (which is what affects your IP address card) is 195.130.132.102.  It is a public IP address belonging to Telenet/Pandora, a Belgian Internet service provider.  In almost all wireless home networks, the DHCP server is part of the router, so your situation is very different.

  Virtual private network (VPN)
  What complicates your Internet connection is the fact that you seem to be using a VPN. This is identified as the 'card Ethernet Hamachi.' I saw many posts complaining that the Hamachi software interferes with various other network connections.  For example:

  After the installation of LogMeIn Hamachi, my continuous wireless network connection disconnected from the internet every few minutes. The wireless connection is ok, but trying to access the internet, I get a message to reset the connection.

  Once I got disabling the network Hamachi (Control Panel-> network) connection and Internet-> network connections, everything is back to normal.

  It happens on two different routers, then the router is probably not the problem.

  This happens with the wired connection.

  I use Windows 7 Home Premium SP 1 64 Bit, Hamachi 2.0.3.89, Intel WiFi Link 5300 AGN.

  LINK

  This is beyond my area of expertise.  If you are unable to determine a driver (or hardware) problem with your adapter wireless and you have installed Hamachi VPN software on your desktop and your laptop, assuming that you really need, you need to get help from the support service of some entity required or recommended use of Hamachi VPN software.

• iPod connection and synchronization problems classic160GB

  I have a well taken in charge iPod classic 160GB. Worked perfectly until...

  Since the upgrade to the latest OS (iMac), I've been prone to random error when updating of my music. Essentially (1) the device is still connected and there is no apparent way to perform a good ejection process (2) and synchronization fails after many hours and don't care only about 100 songs.

  Thus, it seems that the iPod is ok mechanically. I have reset the device and formatted the HARD drive. This allowed then the synchronization process works correctly. Yesterday I downloaded the songs on the iTunes store and wanted on the iPod - same problems error has occurred.

  Would it not make sense to go back to an earlier version of the operating system? and iTunes? (same iTunes appears unstable now...)

  I see that this timing issue is quite common with this unit holders and it seems to be common, because support was arrested for this camera - I'd be cynical? Why isn't Apple in the face of what it comes to very bad reputation management - total contempt for Affairs of its user base?

  I always use what is apparently a good piece of hardware, but I'm extremely frustrated as a user. Any body found the corrective action? If so, what is it?

  LAST: I left Apple and bought a Sony HD camera. Why? as a result of these frustrations. I'm now evaluate whether to consider other Apple devices that are close to replacement (viz, Ipad, MacBook Pro (17 "), iMAc) with non-Apple devices. This is how frustrated and I'm in a bad mood.

  Please, if you know a solution, I am very willing to try that.

  Problems with synchronization is often caused by a hard drive which becomes unreliable.  Hard drives are mechanical and ends by fail, computers and iPods.  I have much older iPods (4th gen, 3rd generation and iPod mini) that are more than 10 years at this point.  They still work perfectly fine with the latest version of OS X and iTunes.  I replaced the fragile hard drives in three of these iPods with Compact Flash card or an SD card on an adapter.  For the 5th generation and later iPods, you can look here for more information

  https://www.iFlash.xyz/

  I see that this synchronization problem is quite common with this unit-holders...

  It's not just 'common good' considering there are millions of iPods (with storage on hard disk) still serving there.  However, if you see more cases of these days, the reason is obvious.  They age, on average.  The iPod classic model was released back in 2007.  Old things tend to start fault for various reasons, including defective hard drive.

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.

• "Cannot connect" and I'm stumped.

  I could not connect to the Internet (through AT & T) all day (early 2011 MacBook Pro, OS 10.11.3 and a wired Ethernet modem).

  As soon as I start it, I get the following error message:

  "Network connection: the connection failed because the communication device is not available." Make sure that it is connected to your computer, and try to reconnect. "(I did, but it does not help).

  In system preferences: network: "AT & T DSL: not connected" and "Ethernet: not connected." The Ethernet cable is not plugged in or the device at the other end does not respond. »

  I have no Internet connection problem with a utility boot disk, which has network settings and account Internet identical to those on the drive hard internal and is essentially a put to update the clone of the drive of the MacBook.

  When I checked the MacBook with disk utility, as a first step, he reported some problems with partitioning [!], but when I ran disk utility, again, he has reported that "the partition plan seems to be OK." Disk Warrior noted no problem. The button "Help me" in the network reports 'Not connected' preferences as above, but does not offer to fix it.

  I've never had this problem before, and I see no option except to wipe the hard drive and reinstall from a Time Machine backup (a little intimidating because I've not done this before either).

  Grateful for the advice.

  Bob

  Galveston

  Can be restoring from time machine is a good idea. It's easy, you start your Mac in the recovery mode by pressing Cmd - R and the power button. Then begin to restore. The only problem is that it is a lot of time.