Problems connecting to AD users

Similar Questions

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,

• Cannot connect to the user account

  Hello

  I have a Mac Mini end of 2012 running OXS El Capitan, while downloading the movies I did spill over from my hard drive, while this isn't a problem in itself when I restarted I am able to connect to my user accounts.

  Specifically what I see, this is the option normal user with the available accounts login screen - I select a configured account (I have 2 of them) enter the word of past (rightly), then instead enter the account, I get the login screen again.

  Strangely enough, when I select the guest account, I can get in.

  Any ideas how do past this and on the accounts?

  I tried to reset the NVRAM that allowed me to access disks and do first aid, it has not shown any questions or help, unfortunately.

  I have access to the Mac using a Windows PC, which allowed me to make space on the hard disk drive by removing some of the movies.

  Thank you very much

  Keith M

  Try to start in safe mode and then open a session and try to delete files to free up disk space.

  Try safe mode if your Mac does not end commissioning - Apple Support

• Check error: there was a problem connecting to the server Apple ID

  When I try to connect to my iTunes on my Windows laptop account it is said there is a problem connecting to the Apple ID server. This problem did not begin until 2 days. I have the latest version of iTunes and Windows.

  What is the number of the version of iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Leave a post by: turingtest2

  On the PC, when connecting each device, it loads a separate driver. You can try this trick when you want to get iTunes recognizes the iPhone 6. Thanks to the user of the CSA turingtest2 for the tip.

  Try the following:

  Open Control Panel > Device Manager

  Plug in your device

  Locate Bus USB Controllers > Apple Mobile Device USB Driver.
  It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.

  Right-click and select software update of the driver...

  Click Browse my computer for driver software

  Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers

  Click on let me pick from a list of drivers for devices on my computer

  Click on Apple Mobile Device USB Driver

  Click Next, then close and exit the Device Manager

  Leave a post by: ChrisJ4203

• Possible to access the service materials? (without connection to a user account)

  I'm curious to know if there are problems with access to hardware OR a program running as a service (IE with no user logged on to the computer). I'm about to start development on a service addressing a NOR-IMAQ device, and I need to begin to acquire data when the computer starts without connecting to a user account. I don't know if access to an INTERFACE created in NOR-MAX requires that a user be logged.

  It will run on Windows 7.

  I appreciate any idea. Thank you!

  I had time to do a basic test and was able to capture data from a camera through IMAQ and store on the disk without the need to log on successfully. The service launched at startup and a lot of stored data before I had the chance to open a session.

• I can not connect on my user profile who is also the administrator. I get a message that the password is incorrect, however I have not changed the password. s not now what it was

  I can't connect to my user profile who is also the administrator.  I get a message that the password is incorrect, however I have not changed the password. My 11 year old niece used the pc last (play online games) and I was informed that it was a download/installation, but do not now what it was. I can't download or update any information on the pc that this requires the admin password. I am currently using the guest account, that does not give me access to all programs and the pc is running a little slower than ususal. Your help with this questions is appreciated.

  the operating system is Windows Vista Home Basic 32-bit.

  Hello

  If your niece has changed the password, or you have a corrupted system, this Information Microsoft will help you.

  Here are the different circumstances where it can help you.

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  And as you say that your niece may have downloaded something, that something could have been malicious, that can cause problems with password.

  Download, updatre and scan your system with Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• cannot connect to my user account

  When I try to log in to my user account, I get the following message: "the service user profile Service could not connect..." User profile cannot be loaded. My fiance ' has no problem connecting to his account. Can someone help me solve the problem?

  When I try to log in to my user account, I get the following message: "the service user profile Service could not connect..." User profile cannot be loaded. My fiance ' has no problem connecting to his account. Can someone help me solve the problem?

  You haveanother admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I can't connect to my user profile. I am the administrator and cannot connect

  original title: problems with user profile

  I can't connect to my user profile. I am the administrator and can not connect at all.  password has not been changed.

  I can't connect to my user profile. I am the administrator and can not connect at all.  password has not been changed.

  What is the FULL error message?
  This one? .... Cannot load the user profile and the user profile service does not log

  If Yes, read on...
  You have another admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot connect my midnight user

  I disconnect my laptop, I tried to log in again and he said, it cannot connect to my user profile. someone pls wat shud I do.

  I disconnect my laptop, I tried to log in again and he said, it cannot connect to my user profile. someone pls wat shud I do.

  This is the error message when you tried to open a session?
  The user profile Service has not logon. Use the profile cannot be started.

  If this is the case, please use the following tutorial. It has a "Fix it for me" application as an instructions "Let me fix it myself":

  http://support.Microsoft.com/kb/947215

  If you have a different error message, then please report it.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I am not able to connect on my user profile.

  I am not able to connect to my user profile.  I'm the account administrator.  My password does not work or I can not recall.  I read a lot about other people having similar problems, and most of the advice given to them is not really easy to understand.  It seems that the person must jump through a bunch of hoops just to solve a problem that happens sporadically for no apparent reason a lot of people.  I had this problem before, except that all my accounts could not be consulted and spent a lot of money to get it repaired.  Now, four months later, cannot access my main account, and the other two accounts don't change anything because they are not the main account.  What can we do to prevent that from happening.  You should not have more than one account as your main account for just because you know you need to because you know it will happen again, no matter what you do?

  Hello

  Maybe this will help you:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problems connection Canon SX280 WiFi for Windows 7 (64-bit)

  I hope someone can help me.

  I recently bought a Canon SX280HS that has possibilities of wifi, and I'm having a problem connecting to my laptop.     I use a laptop Dell Inspiron N7110 running Windows 7 (64-bit).   It connects to the internet and a printer wireless via a pretty new without and problems at all Netgear wifi router.    This laptop also has Intel (R) My Wifi Technology, and I can access the utility to it via the control panel.

  After installing wifi set up the software provided with the camera, I first tried to connect the camera via the Netgear router.   After putting in the correct encryption key (I did this many, many times), he search the device, but it is never and eventually times out with a "communication error" and "device not found."

  I was ready to return the camera to Amazon...

  But then I tried to connect the camera using the Intel(r) my Wifi utility.   I activated the technology, put in the correct encryption key, and the cannon appears on the users list, showing its MAC address and a wifi signal strong.   The camera then sees the name of my Dell laptop, but when I try to connect it, all I get is 'connection '.  Finally, it ends with a "communication error" and "connection failed."

  At this point, I find the wifi on the camera works properly because it clearly links to the Intel(r) my Wifi on my laptop.

  Can someone tell me how to configure my laptop to allow the rest of the connection?     Oh, I tried this many times with my anti-virus IT and OFF and my firewall ON and OFF, and it does make a difference.

  Thanks for your help.

  Had the same problem with the same device under Windows. For me, I fixed it by going to control panel > network and sharing Center > view network computers and devices (this, while the camera tries to connect to your PC. I then click with the right button on my camera icon and click "install". Also, make sure that 'file and printer sharing' are on (my PC actually invited this). Don't know if this will help, but worked for me. Can now import wireless!

  All the best,

• Problem connecting to internet 'network unidentified. "

  Original title: remove corrupt card WIRELESS

  Problem connecting to internet. My current tinkering is to disable the Intel network card, reactivate, and I connected. However, when I restart, the change is lost and the network icon shows no access, and offers connections that do not work. I guess that somewhere in the registry is the "unidentified network" below.

  The network page shows the connection contains two networks, the right most "unidentified network".  I tried to review or delete this without success.

  When I connect as long as user admin, the connection is present and working.

  How is - a change the connections?

  Hello

  Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the computer?
  2. You are using a wired or wireless network?

  This problem might have occurred because of these reasons:

  1. Corrupt drivers.
  2. Incorrect settings.

  Try the steps listed here:

  Method 1:
  I suggest you to perform network troubleshooting and check if it helps. It will help resolve common network connectivity errors.

  Network convenience stores
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2:
  If the problem persists, I suggest to try the procedure described in the following article and check if it helps.

  Why can't connect me to a network?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-7

  Check out the link for more information.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problem connecting via Windows Remote Assistant

  I have a problem connecting to my PC mother via Windows remote assistant. I checked the setting and services run. I get the following error:

  Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not	Detected
  Contact your network administrator or ISP (ISP) Completed
  Could not establish a Remote Assistance connection

  
  Could not establish a Remote Assistance connection Detected

  There is no problems detected on this computer

  Completed

  Problems found	Details of detection
  6 Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not Detected
  Contact your network administrator or ISP (ISP) Completed Windows cannot communicate with the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854). The computer or the service that you want to achieve may be temporarily unavailable. If the device or resource is nearby and you have access, make sure that it is turned on and connected to the network.

  6 Could not establish a Remote Assistance connection Detected
  There is no problems detected on this computer Completed There could be a problem on the computer that you are trying to connect to. If the person you help running Windows 7, ask them to click Troubleshooting in the Remote Assistance program. If they run older versions of Windows, you can ask them to use the Internet connectivity evaluation tool from the Microsoft Web site.
  Details of detection

  Diagnostic information (Teredo)

  Details on the diagnosis of Teredo:

  
   
  Settings for Teredo
  ---------------------------------------------
  Type: customer
  Server name: teredo.ipv6.microsoft.com.
  Client refresh interval: 30 seconds
  Client port: not specified
  State: qualified
  Type of customer: teredo client
  Network: unmanaged
  NAT: restricted
  Special behavior NAT: UPNP: no PortPreserving: Yes
  Local mapping: 192.168.1.7:57043
  External NAT mapping: 69.248.92.196:57043

  Diagnostic information (Teredo)

  Details on the diagnosis of Teredo:   Settings for Teredo --------------------------------------------- Type: customer Server name: teredo.ipv6.microsoft.com. Client refresh interval: 30 seconds Client port: not specified State: qualified Type of customer: teredo client Network: unmanaged NAT: restricted Special behavior NAT: UPNP: no PortPreserving: Yes Local mapping: 192.168.1.7:57043 External NAT mapping: 69.248.92.196:57043

  Network Diagnostics log

  Name of the file: 398A911D-DDA8-41E3-9FF3-4E36B200143B. Diagnose.Admin.0.etl

  Other newspapers and Network Configuration

  Name of the file: NetworkConfiguration.cab

  Computer name:	USER-PC
  Version of Windows:	6.1
  Architecture:	AMD64
  Time:	Friday, May 16, 2014 14:31:02
  Publisher details

  Detecting network connectivity problems.
  Package version:	1.0
  Publisher:	Microsoft Windows

  Keep in mind that if the person seeking assistance uses a router (instead of connecting directly to the modem), then you will need to redirect port configuration.  The request when she sends uses the IP address of his computer, but that the IP is not always accessible to the public.  For example, IP address of my PC is 192.168.0.4 (the 4th computer on my network at the present time), and this address cannot be used to connect to my PC.  You know my public IP address, so, I need the configuration of port forwarding to direct your incoming connection to my public address during my internal IP address (called traversal NAT, or network address translation).

  There is a reason, I generally recommend free tools that use HTTP transport instead, like Team Viewer app free (for personal use).

• T400: Error Message - there was a problem connecting to the TPM secure

  Hello

  I am a new user of ThinkPad. I just got my T400 a week ago, and I'm a fan of him immediately. But there's this little thing that really bothers me. The second day I used my laptop, I got this error message: "There was a problem connecting to the module of TPM (safety device) on this computer", and I got this message since that date, every time I turn on my laptop.  What it means? And how do I get rid of this error message? Thank you!

  Moderator Note: Type + error message added to the line object for clarity.

  go into the bios and check if the TPM secure is enabled or disabled in the BIOS. Make sure it's on. If the problem persists then call Lenovo, could be a hardware problem.

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.