Need advice on the headset and splitter for HP EliteBook

Similar Questions

• Need to update the BIOS and drivers for Satellite Satellite Pro A10

  I have a Toshiba Satellite SPA10 model num E = 09VYL-PSA15-EN. I searched everywhere but can not find update BIOS and drivers for this model of laptop.

  Please provide me with a link.

  Hello Debbie

  There is no such thing as SPA10 satellite. You either have Satellite A10 or P10. Please check on the label at the bottom of your laptop. Correctly identify your laptop model and you will find everything you need on Toshiba download page.

• Need advice on the purchase of laptop for first Pro CC

  Hello, I have a small budget less $1 099,00 I want to make sure that I buy a laptop that meets the requirements of the system (in particular

  AMD and NVIDIA graphics for the GPU acceleration cards).

  Please check the link and help me to choose the cheapest computer laptop less $ 1 099,00 which runs the first Pro CC with success. Click on the link bit.ly/1WeFdD7

  Please visit: https://helpx.adobe.com/premiere-pro/system-requirements.html

  I hope this helps.

  Concerning

  Megha Rawat

• Need advice on the new hard disk for Satellite A60 302

  I want a new hard drive in my laptop (Satellite A60-302) t. This is - http://www.seagate.com/cda/products/discsales/marketing/detail/0, 1596,736,00.html drive, to adapt to the laptop?

  Answer to this question can give just anyone who has the same unit and tested it with the same HARD drive. Problem is that there is no exact specification on the latest BIOS updates and no one can say with certainty whether or not he will support.

• I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. Help

  I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. HELP PLEASE. previous e-mail files are under mail then mail.earthlink* .net and each of the five mail .net is an email address I have. I can't find a way to identify each file by email to the specific email address (IE mail.my E-mail name.net) so I can copy the files and emails from the past to the email addresses now under tbird. previous installed e-mail identities may not be the current configuration of e-mail files in tbird. I think that I must be sure that mail.name.net matches the previous mail.name.net to be able to copy and paste the old to the new. is there a way to find the file name correct the old email and correspond to the new? all my emails very important information are mostly in the old mail electronic id and must be available in the identification of email again (but same) how can I do this?

  http://KB.mozillazine.org/Importing_folders

  Use this module.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

• Need to delete the files and unwanted programs

  Original title - used laptop questions

  I inherited a laptop Toshiba family, now full of their information and mine, passwords, and others.  There a program according to Toshiba Recovery disk, which is easy enough for anyone to use?  I want just all the other information that mine are not off the computer, not necessarily the programs and associated files.  As my collection of mp3 curly and all my family photos.  The OS is Vista Home Basic 64 bit, if that matters. I just want to be able to do this at home rather than having someone paid to do. Thank you.

  Hello

  If you get a second hand computer, you must reinstall the operating system and start to configure it as you wish.

  There are other reasons why it is recommended, that probably does not apply in your case: Malware, p0rn, etc..

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Need advice - questions of m8100n and stop Pavilion

  Hi all!

  I need some technical advice, because I do not know what way to go now with my m8100n Pavilion.  He began to act up in March of this year and died in total.  Once troubleshooting with support online from HP, it was determined that my motherboard (Nettle2) is bad and that it has replaced.  As it was out of warranty, we decided that a new Office was a more cost-effective solution, so the m8100n has set aside for me to tinker with later.

  Two weeks ago, I had the nerve to replace the motherboard myself.  I'm handy with all other aspects of the inside of a PC, but the motherboard was the "last frontier" for me.  I found a MCP61PM-HM on eBay that was v2.20 (thinking that the original motherboard had been improved since the v1.08 which was in my m8100n), so I bought it.  Replace the motherboard, I discovered that I had bought a Nettle3, who would continue to work with my m8100n but would lose a PCI slot.  No biggie!  I replaced the Nettle3 and all connected together and voila!  The m8100n puts as it is supposed to and no closing fast and constant.  I am a camper happy, right?

  Here's my problem: I installed Windows Vista on the m8100n using the motherboard Nettle3 (Yes, I know about the need for the new motherboard tattoo the recovery discs to work, but I wanted to use this office as a backup/file server, so I was not terribly concerned about the recovery discs) and everything seems to work very well.  However, after leaving the unit top during the night or during the day while I am at work, I find that the unit has stopped.  The green light at the back of the Unit indicates that the power supply is always powered, so I don't think that is the question.  Just for fun, I installed PC Wizard 2009 and SpeedFan to measure the temperature inside the device, and it doesn't seem to be anything out of the ordinary.  I did the other night while I was watching TV and suddenly noticed that PC Wizard 2009 showed that Core 1 (which I suppose is one of the mainstays of my AMD Athlon 64 X 2 Dual Core 5600 processor) climbed about 25 ° C to 60 ° C and 70 ° C, then 80 c, and finally almost 90 c, while Core 2 showed a steady 15-25 ° C.  I shut down the system to avoid any damage, but now I think the unit is closing itself because the processor overheats.

  Is it possible that one of the mainstays in my Athlon is defective and it is originally the stops, or is there something else I could be dominant?  PC Wizard 2009 tensions seem to be well, and temperatures inside the case seem to happen as well.  I don't want to give up this PC, because it seems that it is something simple that I could be dominant and am thinking that I might be too close to the issue to see what is really bad, and I'm hoping to pull out of the collective wisdom in these forums.

  Thank you in advance for any advice or suggestions that you might be able to offer!

  NEW UPDATE:

  After sitting the PC side for some time over the holidays, I started to do research on the processor AMD Athlon X 2 5600 +, given that all the indications suggest a heat problem with Core 1, who was leading in the PC by stopping.  After researching this CPU Model (Brisbane), it seems that Brisbane processors have a known issue with faulty temperature sensors core, which was probably, leading to a temperature reading fake being reported and causing PC stops.  This would also explain why the radiator or the CPU were always warm to the touch just after a shutdown due to overheating occurred.  I ordered a replacement AMD Athlon X 2 5600 + (not my workhorse PC, so I didn't need to upgrade the processor) and one both installed the CPU, memory, video card, DVD-R/W and finally the hard and everything seems to work normally again.  I ran a few stress tests on the PC from one day to the next, and the max reported temperature was 45 c 42 on Core 1 and Core 2.  It seems that the issue of the arrest was related to the CPU after all!

  Thus, after the better part of a year on and off with the PC, DIY replace the original motherboard to solve the problems of power cycle that I had originally, and replacing the CPU to solve overheating and issues which occurred after replacing the motherboard seems to have given new life to Pavilion m8100n.  What will make an excellent secondary / media server PC and will compliment my Pavilion m9500t nicely.  Thanks for all your help!

• I need to replace the battery and AC adapter of the Satellite Pro U400-160

  I have a Satellite Pro U400-160.

  I need to replace the battery and the charger of my Toshiba, but I am wary about compatibility issues.

  Any battery for Satellite Pro U400 is suitable for mine?
  As I can't find which batteries are specifically suitable for my computer.

  (For example: is this a: http://www.amazon.es/Bater%C3%ADa-Toshiba-Satellite-U400-11V-7800mAh/dp/B0051A9Y88/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1366885340&sr=1-2-catcorr&keywords=satellite+pro+u400?)

  Is there a quick way to check if a battery / charger are compatible?

  Each battery and adapter you get from Toshiba has specific part number. All you have to do is use this same part number and order. You should be able to find on the internet.
  You can also get compatible parts you are ordering by the Toshiba authorized service provider in your country.

  By the way: all U400 models have the same construction and the similar specifications then all the batteries specified for U400 can be used on your U400-160.

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need to reset the date and time

  My system has decided that it is Jan.4th 2004 and everytime I turn it on, I need to reset the date and time. How can I cure this?

  Packard Bell's Web site does not recognize the 'ALT' CO2 as a model.  Despite this, however, PB seems only to provide a 'generic user guide"which is not described the replacement of the motherboard or the battery at all.  In fact, the only thing he has to say about batteries is be careful how get rid you of them.

  Your computer is a laptop or Desktop/Tower computer?

  If you have a desktop/Tower computer, you can look here--> http://www.uktsupport.co.uk/pb/mb/pbmb.htm and see if you can identify the motherboard used in your computer.

  However, if you have a desktop/Tower computer, the best thing to do is to unplug your computer from the network and, taking the precautions perfectly static electricity, open the box and inspect the motherboard yourself.

  A newish mother on the above site, http://www.uktsupport.co.uk/pb/mb/cosmos.htm, shows the battery on the center line vertical and more to the left.  It's just below the 3 PCI slots.  If you have something like that, a Visual inspection should be enough to see how to remove it.  The type of battery will be engraved on the top of the battery.  In the photo, it looks like a model CR-2032, but there are several models of battery on this size.  Battery CR-2032 (or equivalent) is available in almost every pharmacy chain in the United States as well as online and stores like Radio Shack.

  The page for an old motherboard, http://www.uktsupport.co.uk/pb/mb/450.htm, indicates that the battery is a '3.0V DC Lithium soldered to the motherboard"and if that were the case, it would probably be something that you wouldn't do yourself.  However, this thread is to think that all you have to do for this particular mobo is actually finding the right type of support plug-and - battery.

  If you have a laptop, things can get quite a bit more difficult.  If you can find a different model for your computer name, you may be able to find the manual here--> http://tim.id.au/laptops/packardbell/ , but some of these manuals can not explain clearly how to get to the CMOS battery.

• 5530 Evvy replaced printer - need to replace the driver and software?

  Hello

  Recently, I had to feel my 5530 all-in-One printer replaced while it was still under warranty. The replacement came with new driver software and everything, but since it is the same model that I decided not to install it and use the existing driver installed on computers instead. (Replacement not be come with directions for uninstall, said by the way.)

  The new printer is connected to the wireless network (using touch screen) and is recognized by computers on the network, but I can't get anything to print, since the existing driver HP software does not seem to 'find' the printer. Do I still need to uninstall the driver and reinstall? And what about the other programs installed with HP printer?

  The computers are all Windows 7 64 bit.  I'm not very technical, so it makes me a little nervous.

  Thanks for any help you can give.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• need to download the latest camera raw for cs6

  need to download the latest camera raw for cs6

  Open Photoshop and click Help > updates

  What operating system do you use?

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps