Need drivers: pcmcia controller driver compatible cirrus logic CCIP and graphics amd-8151 HyperTransport (MC) AGP3.0 tunnel

Similar Questions

• I had to format my hard drive and now I need a video controller (VGA Compatible)

  I have a PC laptop Toshiba Satellite A105-S4334

  I am running Windows XP with SP 3

  I had to reformat my hard drive.  I used the disc that came with the laptop but I can not use both screens for presentations.

  He says I need a video controller (VGA Compatible) but I can't find it on the Toshiba site or the site of Microsoft.

  Where can I get good video controller (VGA Compatible)?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://forums.Toshiba.com/

  It will be useful.

• Need to format the drive due to some problems and having to reinstall Windows 7. I could use the same product key

  Original title: Windows 7

  I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.

  I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.

  Thank you

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• need SM bus controller driver for HP Pavillion G7-1365dx

  I have a HP G7-1365DX I just did a clean install of Windows 7 Ultimate X 64, now my device manager tells me that I have no drivers for: CONTROLLER of SM BUS for PCI DEVICE.

  OK I give up, usually I can fix stuff loke that well enough, but I guess that the old brain Pan does not work well today. What about a little help here.

  Thanks in advance

  Hello:

  It's easy if you know the secret.

  Download and install the chipset driver (first listed file) from the link below.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Then you need this driver for the dev of PCI.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103100-1&CC=US&DLC=en&LC=en&os=4063&Product=5218738&sw_lang=

• Satellite A100-294 - need mass storage controller driver

  Dear all.

  Where I can download: controller driver for mass storage for notebook Tosiba Satellite model A100-294:
  Reference number: PSAA8E-02T014GR

  Please help me.
  Sunny
  \

  You need this driver for Windows XP or Windows Vista?
  Why should you get this driver? You have no yellow exclamation point in Device Manager?

• Need SM Bus controller driver

  My friend bought a HP Pavilion p7 - 1280t CTO desktop PC.

  Model: A5T49AV #ABA

  It came with Windows Home Premium 64-bit.

  I bought & installed Windows 7 Ultimate 64-bit.

  The computer is now lack the SM Bus controller driver.

  I can't that site, or I understand?

  Hello:

  It should just need to the chipset driver. Select the first item listed.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20775&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType=.

  Paul

• Need SM Bus controller driver, HP Pavilion g4 - 1264ca

  Hello

  I need the controller driver of Bus SM for HP Pavilion g4 - 1264ca, Ive tried updating the driver through internet, looked for a driver on the HP site and used the HP help and Support program and still no luck.

  Any help would be appreciated.

  Thank you

  Hello

  Try installing the Chipset driver package from the following link.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207

  When finished, restart the laptop.

  Kind regards

  DP - K

• I need a network controller driver download

  My internet does not work and I need to be able to update the rest of my drivers
  The laptop is a HP Pavilion dv4-2161nr

  The following are the hardware ID
  
  PC\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PC\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  
  PC\VEN_10EC & DEV_8176 & CC_028000
  
  PC\VEN_10EC & DEV_8176 & CC_0280

  Also I need a driver Realtek PCIe FE Family Controller #2
  Hardware ID are as follows
  
  PC\VEN_10EC & DEV_8136 & SUBSYS_3577103C & REV_05

  PC\VEN_10EC & DEV_8136 & SUBSYS_3577103C
  
  PC\VEN_10EC & DEV_8136 & CC_020000
  
  PC\VEN_10EC & DEV_8136 & CC_0200

  Hello:

  You need these drivers...

  Ethernet:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79359-1&cc=us&DLC=en&LC=en&OS=4063&product=4125877&sw_lang=

  Wireless:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Satellite Pro 6000: video controller - driver compatible vga

  Hello

  I have a Satellite Pro 6000 but I can't watch DVD because they run very slowly.
  That's probably because my video controller is not installed, but I can't find a
  Driver video controller for a 6000 SP. My OS is XP.
  Can someone help me?
  Thank you

  Hello

  You need to install the Trident display driver. You can find it on the European driver Toshiba page in the Archive folder.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Choose Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000-> Win XP

  By the way; You must use a special software like PowerDVD or WinDVD to play and watch DVD movies!

• Tecra M2 - I need a new HARD drive compatible

  Hi, I just bought a 2nd hand Tecra M2, but the hard drive will be replaced soon because it is endangered. I found a hard drive on ebay that says it's compatible, it says in the title for the hard drive

  "Toshiba Laptop Tecra TE S2 S1 M3 M2 M1 hard disk 120 GB.
  (Here's a direct link http://cgi.ebay.co.uk/Toshiba-120GB-Laptop-Hard-Drive-Tecra-TE-S2-S1-M3-M2-M1_W0QQitemZ230361558318QQcmdZViewItemQQptZPCC_Dri ves_Storage_Internal? hash = item35a29e6d2e & _trksid = p 3286.m63.l1177)

  but there seems to be so many models of m2 that I don't know if this drive will be compatible with each other. I'm a novice, if you have not already guessed! So, I would be very grateful for the advice. Model No. my particular M2. is PTM20E-01KK3-FR

  Thank you very much!

  Hello

  For the Tecra M2 you need a HARD drive with IDE interface, and this means that the HDD from eBay should also work on your laptop properly.

  As far as I know the Tecra M2 may due the only handful of 28-bit LBA limit s HDD up to 128 GB 120 GB HARD drive should work. :)

  Welcome them

• Satellite P300D-h-13 - need Mass Storage Controller driver for Vista 64 bit

  Hello!
  My cake for laptop with 32-bit Vista preinstalled. But since it has 4 GB of RAM and 64-bit pprocessor I bought Vista 64.
  I installed and configured everything except Mass Storage Controller. I don't know if it's for the SATA controller or something else?

  Kind regards
  Sasa

  Hello

  I guess the mass storage controller is the same as Intel Matrix Storage Manager and it contains the SATA drivers.

  You can find it on the Intel page!

  Simply search on the Intel page and you should find the necessary driver!

  Good bye

• need for network controller drive

  HP Envy 14 - 1201tx beats edition Notebook PC

  Product number - LD937PA

  Windows 7 Ultimate

  I need a driver for the controller.thanks network

  Hello:

  You have the Broadcom network controller.

  Here is the link to the latest driver for it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-95652-1&mode=5

  You probably also need driver bluetooth for it too...

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-86863-1&CC=US&DLC=en&LC=en&os=4063&Product=5040845&sw_lang=

  Paul

• need sm bus controller driver for desktop p6-2011

  updated 7 pro and sought chip set drivers, have not found the right pair. any suggestions

  Thank you

  HiL:

  My PC should work. It also has the Intel 6 series chipset.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037949&prodNameId=5037951&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=vc-88640-1

  The Intel site is down.

• Need SM Bus controller driver, TIA

  Uses a Pavilion ZV5466cl, p/n PR470UA #ABA.

  Thank you for your time.

  Try this Chipset

• Need drivers all in one HP PSC 1610v scanning and printing under OS 10.8.5

  I got a G4 MacPowerBook operating an all-in-one HP PSC 1610v and when my G4 died I replaced it with a MacPowerBookPro 10.8.5 OS and now my HP 1610v all-in-one works as a scanner.  I tried to download software drivers on the HP web site to correct the problem, but have been unable to do.  Can anyone suggest a fix or workaround?  IowaLocalBoy

  We will uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press on and press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall, it IS the Option of the scrubber, no button is labeled "washer".
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.