Temporary file needed for initialization could not be created

Similar Questions

• Error.' c:\docume~'\earl\locals~1\temp. A temporary file needed for initialization could not be created or cannot be written in ' when try to run 16-bit programs in windows xp computer at home.

  original title: 16-bit windows subsystem error

  I was able to run 16-bit programs on my computer with windows xp home edition. now when I try to open the program I get a 16-bit windows subsystem error. c:\DOCUME~'\earl\locals~1\Temp. a temporary file needed for initialization could not be created or cannot be written to. Make sure that the path exists, and the space is 'close' to teminate the application available.choose

  Hi EarlBettencourt,

  You can follow this link & check if the problem persists:

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  Hope the helps of information.

• A .cab file needed for installation is not reliable. Please check the Cryptographic Services are enabled and that the cab file is valid .__Help! __

  OK, so I need DirectX 0.9 c to the game red alert 3, but I can't on the new directx installed on my computer because of this error
  A .cab file needed for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.

  have you tried solutions on how to solve this problem posted by mods on the previous posts with a similar problem, but it does not work for me

  help is appreciated, thanks

  Game of automatic encryption Services Cryptography on AutoServices and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Reference: http://support.microsoft.com/kb/822798/ and follow all practices listed in the article.

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• I have can´t initialize photoshop for this reason could not load actions because an unexpected end of file was encountered. "Could not initialize Photoshop because the preferences file was invalid (removed)" How can I solve this problem?

  I have can´t initialize photoshop for this reason could not load actions because an unexpected end of file was encountered. "Could not initialize Photoshop because the preferences file was invalid (removed)" How can I solve this problem?

  I have a MacBook Pro.

  App - Adobe Creative suite 5.5

  The only application that initialize does´t is photoshop

  Solve the problem

  FAQ: How to reset my preferences?

  Thank you Jeffrey Tranberry

• How to defragment the drive d error: some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.

  Original title: how to defragment the d drive

  Defragmentation is complete for: (c :)) some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.   I solve this problem with pagedefrag but same problem with the D: drive. What can I do? is a D: disk defragmentation program at system startup? Please help me :(

  Its a simple but problem ongoing with the pagefile... The hd is in use & cannot defragment parts of it

  because of this, use to defrag times. To fix the files fragmented on any hard drive, open the system

  Properties, performance, advance, the page file, change the button, select the hd, press "no paging file" value

  Enter 2 X, close, restart the pc. Once in xp, open cmd, type: CLEANMGR then select the hd,

  type: Defrag D: D: being fragmented, once through, hd output cmd, return to system properties, set

  the swap file for hd to "let the system manage", click 2 x game, close, you get a couple of windows

  saying: 'replace the file' say Yes close... Sometimes you have to try several, but you will succeed...

• Garry s Mod 13, install DirectX has failed, "a .cab file is needed for installation is not reliable?

  Hey!

  I did research on this problem literally all over the web, on the forums, support contact Dell and Microsoft hardware too.

  But the question is always free!

  -Very well, so I recently downloaded 13 beta Garry Mod, and I wanted to play. I clicked on 'Play' and he said:

  "Error!"

  You need to update DirectX - google search for "DirectX Runtime" "

  So, I put google and downloaded the link he gave me. I ran the program, and that's what happned:

  "Initializing...". »

  "Installation of components: "

  DirectX Runtime Opitonal Componets.

  Then suddenly out of nowhere, a window pops up saying:

  "A .cab file is needed for installation is not reliable." Please check the cyptographique Services are enabled and the certificate file is valid. »

  After clicking 'OK', it goes back to the origional instalation window saying "Installation failed."

  I'm extremely lost here, I searched for answers, but none of them seem to apply or work.

  I have Windows 7 on an Alienware M14XR2.

  Something will help you, thanks!

  try creating another account

• When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader.  This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall a

  That's happened?   When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader. No idea how or why this has happened. This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall and reinstall Acrobat Reader a few times.  With Acrobat Reader installed now I can't open my browsers or other files that has changed.  With Acrobat Reader uninstalled icons are appropriate and I can open the browsers, but other files may not always be open.  What happened, and what I can do to use Acrobat Reader again and also use my browsers and open the other files?

  You have tried to download Windows Explorer?

  In any case, this might solve your problem: Application, file icons change in Acrobat/Reader icon

• Get "the file could not be created" during the recording of RAW to JPG in Photoshop CS6

  I've been editing countless Canon. Files RAW CR2 in Photoshop CS6 (v. 13.0 x 64 Extended), that uses the plugin Adobe Photoshop Camera Raw (v. 7.1.0.354), for the years and check in. JPG. But now ithased suddenly stopped working. When I save a file, it says "the file could not be created." My computer is a MacBook Air running OS X Yosemite v. 10.10.5. Nothing about the one who has changed recently. Photoshop has simply ceased to save files that I have edited. (It does not create the.) XMP files, however.)

  I really need to be able to do this work. Help, please. Thank you!

  Hi davids

  What happens when you save the file to a different location?

  Also to update your rough version of the camera to 9.1.1

  Download link:-http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/9.1.88/setup.dmg

  Concerning

  Assani

• Windows XP install error "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press a key to exit. "

  I've been setting up a windows xp professional operating system, I saw an error message "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit", can anyone help me how can I solve this problem? Thank you.

  Hi HannaAntoun,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/330181

  I hope this helps!

• Error: "an error occurred saving the file because it could not be created" during the recording of digitized file

  Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.

  I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.

  Hi ameerlakhani,
   
  Try to save the scanned in a different file format and check if it helps fix the problem.
  Follow the steps in this article and check if it helps.
  Using the HP scan Diagnostic Utility
   
  If this is not enough, post your request in the support forum HP for assistance.
  Visit the following link to do the same thing:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

• Cannot start Windows Mail because "file MSOE. DLL could not be loaded. " System files corrupted...

  I have problems starting Windows Mail because «file MSOE.» DLL could not be loaded. " I ran the SFC function, and after checking my file system, he said there was some corrupted files, and some of them could not be fixed.

  Any suggestions on what I might try next?

  Thanks in advance for your help.

  Hello

  Make sure that Windows Mail is not running - check the Task Manager - right click on taskbar - task manager

  Download WMUtil - SAVE - DECOMPRESS go to where you put - it - right click RUN AS ADMIN

  http://www.oehelp.com/WMUtil/

  Check #3 and WinMail commentary by the author of WMUtil
  http://www.oehelp.com/OETips.aspx#3

  More expert here:

  Discussions in microsoft.public.windows.vista.mail
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.mail&cat=en_us_fdf138d6-427A-48D6-84dc-a91a6c9fbb45&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

  Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

  Hi jsims313,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         What is the format of the movie saved project file?

  ·         When you get this error message?

  To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

  1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
  2. Open a project in Windows Movie Maker.
  3. Click file, and then click Publish Movie.
  4. Click DVD, and then click Next. Creation of DVD Windows opens.
  5. All the steps to create a DVD using Windows DVD creation.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I moved my windows mail contacts place and now I can't find them. I get the message the file MSOE. DLL could not be initialized. Windows Mail does not open.

  I was exploring the information about "move your files and user files to another partition" I'm a little short on space.   I chose the location tab in my Contacts Properties window to have a look at the possibilities of some of my folders move to another partition on my computer.   However, I clicked obviously wrong, and now I got a message that the file MSOE. DLL could not be initialized.   I tried the system restore, but no restore points are available to me before today.  Are there jobs that I can do?

  Under your username must be a Contacts folder.   If there is a step, and then either move the new Contacts folder to where he was, or create a new folder under the user name, and then see if it works then.  So if you have a username of 'Heather' contacts should be under C:\Users\Heather\Contacts.  Try and then see if it works very well.  Otherwise, you will need to create a new user and then try to get this to work.

  Steve

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• The data folder of Application for Microsoft Visual Basic Express could not be created.

  Windows 7 Ultimate 64 bit

  After the installation of Microsoft Visual Basic 2010 Express and the execution of the executable, the following message appears: file Visual Basic 2010 Express the Application data for Microsoft Visual Basic 2010 Express could not be created.

  Things, I tried to solve this problem:

  Fixing of the keys in APPDATA

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell folders, HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders ( but they were already OK(  )

  Get full permissions on C:\ProgramData (that I had full access to already)

  Get full permissions on %LocalAppData% (that I had full access to already)

  Running Windows Update

  Vbexpress.exe running as administrator

  None of these solutions worked.

  I noticed that when I open vbexpress.exe (in \Common7\IDE\), it creates a folder in

  %LocalAppData%\Microsoft called 'VBExpress"(which has the blue font),

  VBExpress contains a folder named ' 10.0' and 10.0 has a file named vspdmc.lock with the content "{8603A3A2-D182-4916-BF8B-80A2C531F4D5}". " It is all I could really noticed. I tried running the Sysinternal tools but it has attracted more than 10 million events and counting so I kinda gave up on it. Any help would be greatly appreciated. Thank you

  Hello

  Thank you for visiting the Community Forums of Microsoft.

  Your question related to Visual Basic and seems to be more complex than what is generally answered in the Microsoft Community Forums. It is better suited for the professionals on the MSDN Forums. So I suggest you to post your questions in the MSDN Forums to get help from this link:

  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  Hope it will be useful.