Need hardware Configuration of the host Machine

Similar Questions

• Access to content the connection Internet of COMMENTS of the HOST machine

  Hello

  I have a Windows XP GUEST VM.

  I need to know if it is possible to access internet from the GUEST through the host computer?

  I mean, it is assumed that the HOST does not have an internet connection. I need a way to connect OS invited via my USB WIFI to my router. Then set up some sort of proxy server on the GUEST computer program.

  Then Internet Explore on the HOST computer, I get the proxy server of the computer PROMPT for example: 127.0.0.1 8181 and it would allow me to surf for the HOST machine through my guest computer.

  I saw something similar, so I'm sure it's possible, I don't know how.

  I really hope that some VMWare guru on earth would be able to tell me how this delicate thing can be done.

  Thank you guys

  I just downloaded CCProxy 7, installed and it worked out of the box, so to speak.

  According to the configuration prompt .vmx file that it uses "ethernet0.connectionType ="hostonly"" which by default would be VMnet1 then the host must be configured to use the address IP assigned to prompt only map the guest network which, according to 5. jpg is 192.168.40.128 and you are usin the port of CCPorxy by default for HTTP/RTSP which is 808.  This means serves as a proxy for the host definition should point to 192.168.40.128 port 808.

  Also, I noticed that in picture 7. jpg you VMnet8 changed the default settings and seems to no longer be a NAT type adapter and you should really leave VMnet1 and VMnet8 alone and use the other VMnets if you need to configurations custom as the VMware Desktop products may have problems if the default network is not properly changed.

  In any case if you do not have this work it would be good to see a screenshot of how you have configured the proxy host settings and exit if ipconfig/all on the host and the guest redirected to a file and attached to an answer.

  Copy & paste the following commands, as is, and then press ENTER...

  On the host in a command prompt. (Start > all programs > Accessories > command prompt)

  ipconfig /all > "%USERPROFILE%\Desktop\host_ipconfig.txt"
  

  This will create a file on the desktop of the host named host_ipconfig.txt

  On the client in a command prompt. (Start > all programs > Accessories > command prompt)

  ipconfig /all > "%USERPROFILE%\Desktop\guest_ipconfig.txt"
  

  This will create a file on the client named guest_ipconfig.txt Office

  Check the two unpublished files and attach to a response message.

• vSAN 5.5 U2 - Flash Cache error reading configuration ' reason: an error occurred during the configuration of the host.

  Hosts: DL360 G6, dual quad core, 64 GB of RAM

  Discs: 3 SAS 10K rpm and 2 SSD Spidles.

  I am trying to set up one of the hosts of Read Cache Flash but I get the desciptive never so much and the defenseless error message...

  "Configuration on disk/vmfs/device/disks/naa. < longguid > has failed. "Reason: an error occurred during the configuration of the host.

  I hope that there is a log file I can verify for a more profound description of this lame error message.

  Can someone tell me where I can check on this error?

  Thank you

  Oh. k. so, it is the function of Read Cache (vFRC) Flash of vSphere and nothing to do with VSAN

  check the diaries which is throwing this error.

  ESP: /var/log/hostd.log and log/var/log/vmkernel of corresponding calendar. This will show what is happening here

  You can check the following

  one.

  Check if SSD LUNS are not used / no other partition

  # partedUtil getptbl/vmfs/devices/drives.

  b.

  Also check that the SSD lun on that host are local and eligible for the vflash

  List of devices # esxcli storage vflash

  Thank you

• How to get the configuration of the virtual machine, please give me some ideas

  How to get the configuration of the virtual machine, please give me some ideas

  Hello

  Take a look at

  For the General operations of VM

  https://docs.google.com/viewer?a=v&q=cache:F3tEld7LNv0J:communities.vmware.com/servlet/JiveServlet/downloadBody/11301-102-1-10681/GettingStartedGuide.pdf+accessing+virtual+machine+configuration+settings+,+vsphere+sdk&hl=en&gl=uk&pid=bl&srcid=ADGEESgXQlnYzxO10t-E1uHDiz3o1zBBt4ojDZDbzAmHPO3Odcl2HhLlbrSODQjtDPccHMBK7NZ3F_N6xEJqEl29ZD_l-ZUxgSzSirW6qO47dH-bR9E4mfivkf3Ip30jTbBMKQm-7rwR&sig=AHIEtbQaMKQ21DFCex0Wi6NQtHQmEvQvng

  For the settings advanced VM:

  http://blogs.VMware.com/vSphere/2012/03/Acessing-virtual-machine-advanced-settings.html

  Other general settings of the SDK:

  http://vSphere-land.com/vSphere-links/scripting-links-2.html

  Many tx

• The system logging is not configured on the "host"hostname"

  Hi all

  I just install the VMWARE ESXI, 5.0.0 on a hp DL380 G7 Server everything went well, but via Vsphere client, I summarized my host tab the WARNING «Laa system logging is not configured on the "host"hostname".»

  Pour installer I i info on card kind sd server a drive to keep pour VM

  anyone it an idea?

  Thanks in advance

  RRaph

  Hi RRaph,

  Look in this KB if you find no useful info:

  • http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2007658

  A +.

  Franck

• Prevent the player from virtual machine using the VPN to the host machine

  Hello

  One of the reasons that I have installed VM Player with the app "Browser Appliance", was for navigation, I made within this virtual machine would be independent of VPN to my host computer.

  Steps: on the host machine, connect to the Cisco VPN 5000

  On the Virtual Machine try to access a url that wouldn't be avaialable so connected by VPN

  Expected: I am NOT able to access the private URL. If the virtual machine is hacked, the hacker will have access to a URL of the company.

  Note: I use device browser 1.0 with Ubuntu linux. the adapter network mode is NAT.

  Thank you for all the advice

  I assumed that any network (wifi or ethernet) usb-based adapter should allows you to have an isolated inside the guest network.

  Joakim

• No warehouses have been configured on the host

  All of a sudden after a restart, my host says:

  "No warehouses have been configured on the host.

  However, there is only one hard drive in the host and uses it as the local data store. The local data store is the only store of data that was connected to this host. I'm not sure how to get the data store online since it's a local data store. Also no patches or upgrades have been appiled to this host ever. It's just a test area, so Im puzzled why it has worked one minute and not the other.

  Thank you!

  It seems that the drive works in IDE mode (or inheritance).

  You must see it as/dev/sdX not/dev/HDX.

  You can check the BIOS Setup?

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Version hardware VM and the host versions

  How to see the VM version? It's hardware version or version of the summary of each virtual machine software?

  Where to find the host exsi version? I see only the licensed version?

  Thank you!

  Yes, you need to upgrade. may be that your new company guy he have not upgraded

  Now you go all versions to the latest version and supported, and clean. You can take a screenshot, save it as image shape and add it to the response using the symbol of the camera on the upper tab in the window of response.

  If you have any other questions please close the message by choosing a correct answer so others can refer to it in the future

  Thank you

• Mounting VM on the host machine?

  Hello

  Recently, my trial expired for Fusion Desktop 6 for Mac, but I need to get some files of the virtual machine on my host. I know that this is possible, but when I use the app VMMounter thing, I can't find it anywhere, not even download the FUSE thing helps at all. Please could someone help me out here?

  Thanks in advance

  Leon

  (I use OS x 10.9.3 as host, and my VM's OS x Snow Leopard Server)

  The program can only handle set/set of virtual disks. What you're trying to get is a virtual disk to a snapshot.

  And the snapshot is locked.

• virtul machines not ping to the host machine?

  Thanks for the reply and solve my prob...

  now I m command ping with the host computer to the my virtual machines these are pinging...

  but virtual machines don't ping not to host the computer why?

  Please answer me help me...

  Welcome to the community,

  What is the operating system on the host computer. In the case for example of Windows 7, you may need to allow ICMP (ping) in Windows Firewall.

  André

• error "could not complete the configuration of the ha agent on the host computer.". bad configuration of the host network.

  Hola y buenos dias

  me esta dando este error cuando a UN con cluster 2 hots the digo el HA assets. There buscado por internet y the mayoria of las hacen referencia a lo mismo responses:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1039108

  The config of VMware high availability (HA) falla con el error: unable to complete the configuration of the HA agent on the host

  Symptoms

  Resignation: this article traduccion of one ' configuration VMware High Availability fails with the error: unable to complete the configuration of the HA agent on the host "(1019200). Los items han sido traducidos en Español multiple in el mejor esfuerzo. Sin embargo el contenido o can meet desactualizado specific location. Para revisar el contenido mas reciente, please consult el article in English.

  • The config of falla of VMware high availability (HA)
    
  • El client vSphere muestra una Cònsola de Servicio, sin embargo al run el comando esxcfg-vswif - l cuando is esta conectado has the console of Servicio de ESX is revelan consolas additional service
    
  • Following messages appears:
    
    
    • Cannot complete the configuration of the HA agent on the host. See the details of the task for more information.
      
    • Misconfiguration of the network host installation
      
      

  Resolution

  Este problema compares cuando no todos los servidores del cluster the same comparten consoled of servicio o the same config administration of red. Some servidores pueden tener consolas service using numbers different o pueden tener mas that consolas otros servidores.
  
  For example, este error can suceder tambien if the config of the puerta of enlace (gateway) of VMkernel none are the same para todos los servidores del cluster. Para Québec the config, haga click derecho in los servidores con este error y select reconfigure for HA.
  
  Revise las differences in the Red between los servidores config if usted goes a usar por Auto (off o Power Off) x responses, porque estas options provocan eventos registro 'VMware HA isolation' and consoled her of servicio o el registro fallas of administration of red.
  
  If using the funcion esta: VM left the lights on in answer of x, the opcion para ignorar estos messages is available VMware VirtualCenter 2.5 update 3.
  
  Para configurar VirtualCenter para ignorar estos messages, configure the option advanced das.bypassNetCompatCheck como 'true '.
  
  Nota: Cuando esta using the option das.bypassNetCompatCheck, El mechanism of pulse used during the solo en VirtualCenter 2.5 relaciona config direcciones IP simétricas subredes dentro a traves of los nodos. For example, en UN back nodos cluster, if a server has "Service Console" 10.10.1.x 255.255.255.0 vSwif0 tiene y vSwif1 "Service 2" 10.10.5.x Console y el servidor tiene vSwif0 "Service Console" 10.10.2.x 255.255.255.0 B y vSwif1 "Service 2" 10.10.5.x, el pulsation solo opera Console sober vSwif1.»» Desde vCenter Server 4.0, can be related through subredes, hacer TR 'Ping' between subredes are allowed. Sin embargo on VMware is replaced by Recomiendan tenerlas Las subredes dentro.

  1. Haga click derecho in el cluster, luego haga click change settings.
     
  2. Quite the selection to turn on VMware HA.
     
  3. Hope a todos los servidores en el quiten HA cluster.
     
  4. Haga click derecho in el cluster, elija y change the settings.
  
  
• Select turn on VMware HA, luego elija VMware HA desde el cuadro of the izquierda.


• Select Advanced options.
  
• Adicione opcion das.bypassNetCompatCheck con el valor 'true '.
  
• Haga click OK in the options advanced, luego haga click en OK again pantalla para aceptar los cambios in el cluster config.
  
• Hope a todos los servidores ESX in el reconfiguren HA cluster.
  

El tema are that he made lo go y sigo don't con el mismo error y no lo tengo claro what me escapa.

OS explico mi arquitectura

Cluster development: 2 hots ESXi HA con 4.1U1 en mi red (the same as el vCenter)

* Cluster production: 6 Hots ESX HA con 4.1U1 en mi red (the same as el vCenter)
* Cluster DMZ: 1 Hots ESXi 4.1U1 esta en UN behind del cortafuegos Swicth how, y todo el trafico between el host y el esta allowed vCenter
* NuevaDMZ cluster: 2 Hots ESXi 4.1U1 ante las nuevas needs y ante together por parte del responsible of poner seguridad como DMZ is replaced by vmware Recomiendan to vuelve a poner the same config as the DMZ real osea, estan en UN behind del cortafuegos Swicth how, y todo el trafico between los hosts y el esta allowed vCenter.
El switch DMZ y nueva DMZ of course are the same.
Editor rated UN of fotos explicativas.
01.intro good example of config del cluster ESXi Québec TR cluster is activa el HA
version of 02.VM02 y config of Red TO host led (Eliminado porque no puedo mas undergo 5 Fotos)
version of 03.vm03 y config of Red TO host led (Eliminado porque no puedo mas undergo 5 Fotos)
04.the HA configuration config del cluster as falla
version 05.VM04 y config del SO red host
version 06.vm05 y config del SO red host
07.immolation error pues eso el

• VSphere running on the host machine?

  Is it possible to run vSphere on my host machine to connect to itself?

  I have VMware ESXi 5.0.0 Release Build 469512

  It is not possible. We cannot install client vSPhere on ESXi.

  ESXi is not a shell or console on which you can install the vSphere Client.

  This is how it is designed. The host is dedicated to run ESXi. To manage ESXi, you must connect through a vSphere Client that is installed on a windows machine. Or add a vCenter Server host and manage through it.

• You cannot change the configuration of the host

  I have stop my vm which is on san emc readers and he zoned for a second esx server.

  When I scan I can see the disks but I do not see a data store. then I try to add storage, signature of Dungeon and he tells me "cannot change the host configuration.

  (1) what I do 2) I tried vmotion and it did not work

  What is happening in vCenter, correct?  I had this happen in beta.  Connect to your ESXi host and then 'add a storage '.

• Need help to report on the configurations of the virtual machine using PowerCLI

  Hi guys,.

  I try to shoot down vCenter virtual computer configuration details and am not having much luck with vCPU multicore machines.

  Looking at the lists of VMS in vSphere Client, it offers a column "Number of CPU" basis and does not include any other granularity (i.e. in terms of casings & carrots as opposed to simply 'CPU Count').

  I thought that maybe I have better luck using PowerCLI and essentially, the cmdlet "Get - VM" has the kind of information I'm looking for, but I find that it lacks a bit when it comes to vCPU details.  Essentially, it turns out that does not do much better than the list of virtual machines in vSphere Client because it produces only a "CPU Num" value, which is not particularly useful.

  For example, if "processors Num" 4, that '4' means?  This could mean one of the following:

  • 1 x 4 drivers
    
  • Core 2 x 2
    
  • Basic 4 x 1
    

  I hope someone out there can help produce me a list of virtual machines with details of configuration that includes both sockets & carrots for vCPU?

  Thanks in advance!

  Try like this

  Get-VM | Select Name, @{N="CPU";E={$_.ExtensionData.Config.hardware.numCPU/$_.ExtensionData.Config.hardware.numCoresPerSocket}}, @{N="Core per CPU";E={$_.ExtensionData.Config.hardware.numCoresPerSocket}}
  

• Is there an api to get the info of the OS running on the host machine?

  My server is ESXi 4.1, and I can get this information from the property "name" object "AboutInfo.

  But, I can't get the information about the operating system running on the server except the 'osType'.

  However, when I use the command 'uname - a', I can get a long chain, "Linux 2.6.18 vcs - 164.ESX #1 Fri Apr 16 14:57:03 PDT 2010 x86_64 x86_64 x86_64 GNU/Linux" for example, as a result.

  So, my question is that how I can the information of operating system as the above string?

  There are a few places to the VM guestOS.

  (1) when you create a virtual machine, you assign a guestOS type based on the list available in the API here - http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.vm.GuestOsDescriptor.GuestOsIdentifier.html#asianux3Guest. As you can see, it does not include something on a certain core, just the major release version. If you want to query to see what guestOS "configured" has been assigned to particular VM, you can take a look at its config info here - http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.vm.ConfigInfo.html

  (2) now, simply because you have assigned a unique guestOS, this does not mean that it be installed this particular operating system... It's bad because VMware did some things when it virtualizes this comments according to your selection. Another method of extracting the real guestOS leverages VMware Tools, if you have it installed and running within the guestOS, you can extract the BONE that is detected. You can find this information in the comments section that provides details of inside the guest - http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.vm.GuestInfo.html. As you can see, not only you can get the information of the OS, but you can get things like address IP, etc.. Remember that this only works if you have installed VMware tools.

  Now to give you an example where #2 would give better results than the #1. I installed a virtual appliance provided by VMware, the VM shell or it is configured OS has been set at Other Linux (64-bit) but when you query the information of the customer, the OS reported CentOS 4/5 (64-bit) , meaning that it really works. Again, you get only the type of operating system if VMware he understands and is able to detect it. You won't get details on the kernel version or updates/etc.

  If you need this level of granularity, you will need to extract directly from the guestOS. VMware another API called VIX which allows you to execute commands directly from the guest's use case is mainly on the management of comments. http://www.VMware.com/support/developer/VIX-API/

  Hope this helps

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP4-DCA

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".