Need help connecting ESX 3.5

Similar Questions

• Need help, connect to the wifi and Panel set to work.

  Let me start by saying that I recently downloaded malware bytes and microsoft security essentials. Malware found 4 corrupted files. I deleted the and also received a warning that the files needed to restore. I restarted the computer and then I realized that the computer wouldn't connect to the Internet wirelessly. There is no any wifi connection possible. I tried to access the firewall via the Control Panel, but I received a message saying that something is misspelled, and I needed to check my spelling and try again. I can't access anything in the control panel. I then returned to malicious software and restored the files and I don't know if it restored. Again, I have no wireless connections and cannot use Control Panel. I did a restore there when I knew that nothing was wrong with her, but he says that there is no change for a week about a week ago. I need help!

  What are the 'properties' can you get not to?

  If you were not able to see something like this picture--> http://www.askdavetaylor.com/4-blog-pics/windows-system-properties.jpg

  or you have to this Properties dialog box, but the part of the circle includes all mention of the Service Pack,

  Then, it's probably time for you to go to a good independent store (place of type no BigBoxStoreUSA or geeksquad) computer repair.  If they think they can reinstall Windows, ask them to back up your data (files, photos, music) first.  Ask them to tell you the consequences of reinstalling Windows before they do.

• Need help connecting 2 routers

  Hello, I was scratching around the search for a solution to my problem for a few weeks now.

  I have 2 routers (connected according to the picture below) - I have it set up so that I can collect access logs (one of the routers is bit I found that can connect internet URL) to any person who connects via wifi on the BEF router, however I cannot get an internet connection using a LAN port (according to the red line). I read that to record the activity that I need to connect via the internet port (yellow dotted line), but I can't make it work, and it's frustrating the heck out of me now

  Does anyone have any solutions for this?

  Thanks in advance.

  

  What is the address IP of WAG?

  Press and hold the reset button on the BEFW router for 30 seconds. Release the reset and wait 30 seconds. Open the BEFW router configuration page. Change the local IP address of BEFW to 192.168.5.1.

  Connect to port Internet router BEFW WAG. Cycle power to the BEFW11S4 router. Now try to access internet through router BEFW11S4. DO not disable the DHCP server on the router BEFW11S4.

• Need help connecting to the internet wifi router

  I plugged the router using these steps.

  1. unplugged power modem, then plugged the Ethernet cable to the internet port of the router to the modem port.

  2. connecting modem to the power outlet. lights come back waited it.

  3. wired router power adapter taken and waited for the LEDs lights.

  4 router connected to the computer with another Ethernet cable.

  5 open the browser.  No internet connection.

  Window came from the Control Panel, network and sharing.  I chose Home Network.  (I only have one computer, but want to connect a wifi connection tablet.)

  Residential group became

  Ellen-PC - network Internet - X 3

  The X said no internet connection.  I worked in the information network until I myself pointed out and called my cable company.  Still no internet.

  I have restarted the computer, removed the router, modem power drove, received a refresh signal and then reconnected the wifi router.  No Internet.  I called the cable company and told them that the problem with the network.  The technology said that I ran out of network cards.  I thought she meant that I have lack of software.

  I'd just do a Dell restore to the factory settings and thought, the NIC is a program that has not been restored, because I left the modem connected when I did the restore, I repeated the restore factory and re plugged the router.  Still no internet.  I called the cable company, they said that the network adapter is hardware.  I went to the Dell website to buy it.  The sales expert checked my service tag and found that my computer was ready wifi.   Agent said system has card, wireless, HMC, DW1703, BGN, WORLD WIDE.

  Can someone tell me what is the problem?  I think it must be in the Control Panel, "network and sharing."  I type the name given by Netgear, it has been recognized by my tablet, but no internet connection.  Help would be greatly appreciated.

  I have connected to the internet by adding a device in devices and printers.  There is now an icon for my wireless router.  The internet has become immediately available.

• Need help connect you to Windows 7

  I went to log on Windows 7, instead of loading Windows, I get "the user profile Service does not logon, user profile cannot be loaded." Now, I have no access to windows, please help

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Need help - connection problem with R12.1.1 (Vision) on Windows 2008 R2 (Datacenter)

  Hello
  
  (1) we made a fresh install of R12.1.1 (Vision) on Windows Server 2008 R2 for demonstration purposes at the senior management and upgrade planning. Running on 11.5.10.2.
  (2) installation went fine. We follow all the necessary prerequisites for installation.
  (3) after the installation, we did run autoconfig for DB as well as the APPlication and started services.
  (4) we are able to see the page of connection, but not able to connect using generic accounts of OPERATIONS/WELCOME or SYSADMIN/SYSADMIN.
  (5) send the document screenshot and a newspaper for your perusal. Please provide your e-mail id. Not able to attach here.
  
  Please help us with diagnosis and solution.
  
  Thank you and best regards,
  Renaud.
  
  Published by: 988810 on February 18, 2013 18:23

  Please change the password for these users by using FNDCPASS and then - check loss of password SYSADMIN. How to know the password of the user SYSADMIN [ID 1066661.1]

  Thank you
  Hussein

• need help connecting HP envy 4520 with new router

  I have a new router. Cannot find where to change the settings of the printer. Cannot print.

  Reset the printer to the default network.  Then use the front panel wireless configuration wizard if your printer has it.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  Brand and model of modem and router?

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• I need help connecting Microsoft wireless Laser Desktop 4000

  I am trying to hang a Microsoft Wireless Laser Desktop 4000 for a system using Widows XP. The wireless mouse works but the keyboard is not I would like any information I can get ion this question... Thank you very much, MR. Grimm

  Hi norseman168,

  • What happens when you connect the keyboard to the computer?

  I suggest that you download and discover the Microsoft wireless Laser Desktop 4000 manually using the link below to check the use of it and its features.

  http://www.Microsoft.com/hardware/en-us/d/Wireless-Laser-Desktop-4000

• Need help connecting USB device

  I am running VMWare Server 2 on Windows 7 64-bit. VM is Windows XP, my old computer virtualized with software that does not work under Win 7. I don't understand how to connect a USB device, my cell phone, on my system the virtual machine host. The drop-down features of the VMWare Console includes no USB or fact toolbar at the bottom right of the Console window. The management console has an entry for the USB, but the only choice is delete.

  The documentation says "In the menu of controller USB in the toolbar, select the device you want to connect in the sector in the list hosts". I can't locate this list. Can anyone provide a picture?

  The virtual machine has a virtual USB device in its hardware settings? If not, add a when the virtual machine is shut down. Also ensure that VMware Tools is installed in the virtual machine. If in doubt, please post (tie) file for the virtual machine's .vmx. I would also check that you have the VM hardware version 7 to version because it's better for the USB feature. The menu of the USB connect device should be available when the virtual computer is highlighted in the left pane of the console.

  --

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Need help: connection at the base of the monitor w1907

  Greetings from Rio de Janeiro to the Brazil!

  I just bought a w1907 monitor and I'm having a hard time trying to find a way to the basic Assembly. Please, please, please how to set screen angle?  The instructions indicate only that you must align the screen but how?  I'm afraid I'm going to break it. Thank you.

  go to this site

  http://h10032.www1.HP.com/CTG/manual/c00834095.PDF

  will allow you to have the PDF file

  that you can get from Adobe

  http://get.Adobe.com/reader/otherversions/

  on page 8

  You should have one on your right

  the best way I adjust mine is to enter the

  back at the top of the screen with one hand and the other

  down and gently tilting the way you want it to be

• I need help to find the right connection.

  Anyone know what I need to connect my iPhone to my Kenwood KDV-415U 5s? (found here:http://www.manualslib.com/manual/86332/Kenwood-Kdv-415u.html ) I want to hear music that I stream Amazon, on surround speakers in my RV-thanks for your help in advance

  You should be able to use the one below to connect to the USB port on the right side of your Kenwood unit.

  

  http://www.Apple.com/shop/product/MD818AM/A/lightning-to-USB-cable?FNODE=97

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• I need help to connect my iPhone apps on El Captian Office

  I need help to connect my iPhone apps on El Captian Office

  Without knowing exactly what you're trying to do, this article from Apple can help:

  Continuity allows you to connect your iPhone, iPad, iPod touch and Mac - Apple Support

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor