Need help managing Messages

Similar Questions

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• Need help with my Y40-80? power management

  I get message to the center of the Action as follows:

  Compatibility problem between your power management system and Windows

  Your power management system is not compatible with this version of Windows.

  The name of the model of your power management system is ACPI Lenovo compatible virtual controller.

  Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you

  Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon

• DISK MANAGMENT I NEED HELP

  I wanted to delete some files to my sd card. Deletion was not available because the files have been write protected. This is what I found and need help; This sd card in my computer as drive H: properties show that the - STORAGE THAWED and the FILE SYSTEM - TYPE FAT32. First of all, I tried to restore the site, it did not work because the disk is write protected. I have unlocked next to sd Card reader and tried again. This did not help. I then looked at disk management and removable disk 1 3.6 GB read-only (h :)) Primary Partition.)

  I don't know how it happened and I want to be able to use the sd card, so I need help please.

  The card SD gives the same error if inserted in another computer? The manufacturer of the card provides a utility to try to wipe/format cards capricious?  The type of error that you describe usually happens when a card is defective or failed and usually nothing you can do will remedy the situation.

  writing in the new message: * e-mail address is removed from the privacy... *

  I wanted to delete some files to my sd card. Deletion was not available because the files have been write protected. This is what I found and need help; This sd card in my computer as drive H: properties show that the - STORAGE THAWED and the FILE SYSTEM - TYPE FAT32. First of all, I tried to restore the site, it did not work because the disk is write protected. I have unlocked next to sd Card reader and tried again. This did not help. I then looked at disk management and removable disk 1 3.6 GB read-only (h :)) Primary Partition.)

  I don't know how it happened and I want to be able to use the sd card, so I need help please.

• Hi need help I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Hi, I need help, I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Follow the procedure below and check:

  
  

  End Adobe partner all tasks in the Manager of tasks like creative cloud, CoreSync, AAMUpdater... etc.
  

  Uninstall Adobe Creative Cloud application.

  If you face any problem try CC Uninstaller:

  Using creative cloud | Uninstall the creative cloud desktop application

  After removing Adobe Creative Cloud applications, follow these steps:

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove?

  Rename it as Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4:

  Temporarily disable anti-virus and firewall.

  
  

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  
  

  Step 5:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• guys I need help last night I tried to install alcapitan update of my macbook pro, but it did not work and it make me an installation message you cannot be finshed I need help please

  The guys that I need help please,

  Last night I tried to install the update to alcapitan to my macbook pro, but it does not work it makes me a message (your installation cannot be finshed) and many many things and when I try to strt my macbook still keeps it install the updat and then get the message again...

  I need help please

  Hello, check if the mac you can use El Capitan. See the information update of OS X El Capitan - Apple Support here

• can receive messages but can't send on outlook express, need help

  Was just good with this computer that uses windows XP and have added my name is outlook express account. Things were going along fine until it tries to send a response to a current e-mail was greeted with an error message "secure (SSL). ' No, Error.10061 Socket error #0x800CCC0E ' and my message is stuck in my Outbox. Am at a loss to know how this can be resolved and of course need help...

  Check: File | Work offline and in: reviews | Layout: uncheck the preview pane and you should be able to delete the message.

  The account is probably not configured correctly. Double check your settings and if you don't get developed, after back and say EU your e-mail server and send an error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• have dell dimension 4700 xp need help with outlook express I have error message and can not send email

  I need help to figure out why my outlook express does not work when I try to send a link, or email. I have a dell dimension 4700 xp restored. The error message cannot find the server with an error code number. I am a newbee so one who responds to it will have to break it down for me. So far, I had lots of help from proceeding to audio and graphics, and I am totally grateful for the help I get.

  Thank you, Gina Davis

  I have

  He has already worked with Outlook Express? Using OE? Hotmail is a Webmail service.

  How to add your Hotmail e-mail account to Microsoft Outlook Express
  http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c

  If you don't want to use OE to access Hotmail and want to just use IE to access Hotmail, then just copy the link and paste it into a new message from Hotmail.

• Can manage Windows XP Home Edition of Windows 8? Get the error codes for the security updates (0 x 643). ALL through Microsoft Tech INFECTED with the virus and Trojans tried. I need help BADLY. Thank you.

  I tried every thing blessed with technology microsoft... always hanging in limbo here.  Tired of doing constant comprehensive analyses, etc. in order to remove the constant threats.  Apparently my McAfee can't stay with her either.  Need help with the download/repair these seeds as soon as possible.  Thanks to all those who wish to help me - it would be that popular, for sure!

  The question makes no sense.

  "Can manage Windows XP Home Edition of Windows 8?"

  Two problems: there is no Windows 8 and even if there were, Windows XP Home Edition would not not 'manage '.  ;-)

  I drop McAfee for a few different freeware products.  Or better yet I'd get two products 'cost' (~ 25 and 60 dollars) and install them and use them in the future - but WHEN you are trying to clean up.

  You seem like you maybe sincerely - at a time when a format/install of Windows XP/patching/installation of applications/patch/restore backups of your data is the best course of action.

  However, if you are willing to work - maybe we can at least get things cleaned up to a certain point where you can get a good backup before doing this (otherwise avoid doing all together.)

  In the order shown, do not jump (no matter what you do, what you have done in the past, etc.) ...

  First of all - download, install, operate and put to update and then run a full system scan with the following two (one at a time, reboot in-between):

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Search online with eSet Online Scanner.

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now try usig the Fixit (Yes - try to use it again) to reset your Windows Components Update (you'll do the aggressive version, not the other):
  How to reset the Windows Update components?

  Reset.

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Reset.

  Now, open Internet Explorer, visit http://windowsupdate.microsoft.com/ and do a CUSTOM search for updates.  Install any critical/high-priority ones and - for now - to ignore all those in option (always do this for material updates optional here.)

  Restart if necessary and continue to visit this web page until you have not yet updated to high priority.

  Now - if your problem is with the facilities of the .NET Framework...  You can end up with something like:
  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
  to uninstall a few versions of the .NET Framework, then you can try to install again - but you should not do this until the machine is supposed to be cleaned.

• Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

  Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

  This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

  I want to thank all in advance for your answers.

  Nelson Santiago

  Hi NELSONSANTIAGO,

  1. when exactly you receive the error message?

  2. is the Belkin easy transfer cable recognized by the Windows XP computer?

  This file may be located on the Belkin Easy Transfer Cable installation disc.

  For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

  http://en-UK-support.Belkin.com/app/product/detail/p/4825

• Error message "cannot start mssql$ sqlexpress on machine" need help!

  Error message "cannot start mssql$ sqlexpress on machine" need help!

  Hello

  -When exactly you receive this error message? It is at the start of the computer or at the launch of a particular application?

  If you use SQL Express DBMS and are faced with this problem, thanks for posting your query in SQL Server Express Forums for assistance on this issue.

• I need help fixing error 340... only, I get this message when I try to send an email... there at - there a way to fix this error free?

  I need help fixing error 340... only, I get this message when I try to send an email... is possible to fix this for free?

  You must ask Yahoo.
   
  Yahoo support
  http://help.Yahoo.com/l/us/Yahoo/helpcentral/ 

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I have a problem, try to uninstall the ask toolbar. get the error message: cannot access the VB script... need help please

  I have a problem, try to uninstall the ask toolbar. get the error message: unable to access the VB script... need help

  Hello

  How do you try to uninstall the toolbar?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  How to fix script errors in Internet Explorer on Windows computers:

  http://support.Microsoft.com/kb/308260

  Correction of errors in Internet Explorer: http://support.microsoft.com/kb/822521

  Method 2:

  Try to uninstall the toolbar, programs and features and check if it helps.

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope the information is useful.

• everytime I open a window or application, a message goes out _Windows stopped fonctioner_ please I need help

  Hi... "my system is windows vista professional" the problem is that everytime I open a window or one application other thing... a message goes out _Windows has ceased to operate _ Please I need help

  Hello

  I suggest you perform a boot clean and check whether a third-party program is causing the problem.

  Refer to this article for help:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  
  Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer