Need help. New to this for a long time of the FCP user...
I want to start my seq-00; 59; How can 10 00, I do this? also is it bars and tone in CC PP?
In the very top right of your timeline, you will see a little button that opens a menu. There are "beginning" in there.
New file > bars and tone. Good luck!
Tags: Premiere
Similar Questions
-
Windows xp freezes for a long time during the installation of Windows Update.
Original title: xp freeze during an update... what to do
I turned on my computer for the first time in 10 days. When stop he went in update mode (21 updates) and was 19, since yesterday evening around 20:00 is this normal and if not what is my next step since he says do not close during an update?
Hi MarcyDowning,
If the update is blocked for hours, then you can try to restart the computer and check if it starts in normal mode.
If not, then try to start in safe mode and try to perform a system restore:
Step 1:
You can check the article to start in safe mode:
A description of the options to start in Windows XP Mode
Step 2:
If you are able to boot into safe mode, and then try to perform a system restore and check if you are able to boot into normal mode:
How to restore Windows XP to a previous state
Note: When safe mode system restore, system restore points are deleted.
Once you are able to boot into normal mode, you can try to install the updates in batches containing updates 4 or 5 at a time and check if it helps.
For more information, see the article:
-
KB2378111, kb971644, kb2345886, KB2117917-french
kb2505189, kb2443685, kb968930 kb970430.
they are not charges three times
Hello
Try the methods provided below and check if that helps resolve the issue.
Method 1:
I suggest to reset the Windows Update components and then try to download updates and check if the problem persists.
Check out the link provided below for more information on:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 2:
Alternatively, you can try to install the updates in the clean boot state and check if that helps resolve the issue.
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note:
After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Hello
I have an EA of RDBMS Oracle 11.2.0.4.
I ger the following error when I try to convert a data type LONG to type CLOB data thanks to a PL/SQL procedure:
declare
v_prefix varchar2 (20): = null;
v_text_view_clob clob: = null;
long v_text_view_long: = null;cursor c_v
is
Select
a.view_name as view_name
Of
USER_VIEWS one;
Start
for r_v in c_v
loop
Start
v_text_view_clob: = null;
v_text_view_long: = null;-Do the SQL code of the view
Select
a.Text text
in
v_text_view_long
Of
USER_VIEWS one
where
a.view_name = r_v.view_name;v_text_view_clob: = v_text_view_long;
update of ohibo_views one
set
a.view_text = v_text_view_clob
where
a.view_name = r_v.view_name;
exception
while others then
dbms_output.put_line ('View =' | r_v.view_name |) "kan niet worden geconverteerd!");
dbms_output.put_line (substr (sqlerrm, 1, 60));
end;
end loop;
-commit;
exception
while others then
lift;
end;
/I get the error a specific record:
View = VER_POLISMUTATIES_VW kan niet worden geconverteerd!
ORA-06502: PL/SQL: digital error or value
At looked the origina; Value of type LONG and it is indeed a "long" piece of text.
However, CLOB has a restriction about 4G * db_block_size and LONG 2 G - 1 according to the documentation.
I should be able with the method above to convert a LONG in CLOB.
Anyone had a similar situation?
Thanks in advance for advice how to solve.
Kind regards
PS: my apologies, I didn't know which group to post this discussion: database or PL/SQL.
Good indeed, a link with the right explanation.
I didn't know that there was such a function.
Thank you!
Kind regards
-
Script to find concurrent work that ran for a long time in the time range
Oracle Apps:12.1.1
DB: 11.1.0.7
OS: Linux RedHat 86 x 64
All,
A particular day could someone please share the Script to find concurrent work who long ran specifically say between 15:00-16:00 in the one hour time slot.
Thanks for your time!
Kind regardsA particular day could someone please share the Script to find concurrent work who long ran specifically say between 15:00-16:00 in the one hour time slot.
https://forums.Oracle.com/forums/search.jspa?threadID=&q=actual_start_date+and+FND_CONCURRENT_REQUESTS&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
https://forums.Oracle.com/forums/search.jspa?threadID=&q=actual_start_date+and+fnd_conc_req_summary_v&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001Thank you
Hussein -
Windows Explorer hangs for a long time after the installation of the latest updates from Microsoft
Hello!
Yesterday, I downloaded and installed the latest Windows updates on the Web from Microsoft by using Windows Update.
After that, I see a strange thing from time to time.
Sometimes when I open Windows Explorer or on a list of logical drives reader app, the hangs of the application for 10-15 minutes (not answer).
While it hangs, other applications can function normally if they don't read the list of drives, for example, I can use Internet Explorer at the same time.
The appearance of the problem is unpredictable, it can happen after 10 to 20 minutes of work after the reboot, or even after 1-2 hours of labor.
My OS is Vista Home Premium x 64, laptop Pavilion dv7 - 1157 cl.
At the moment I don't have any antivirus software or third party drivers (I configured factory drivers only).
Event log Windows contains no error messages, all devices are displayed in device in the form of work normally without errors management.
I ran the test of memory with the memory diagnostic tool, it found no errors.
Here is the list of the installed Windows updates.
Do you have any suggestions? There may be a problem already known with some updates?
Message edited by Gleb on 14/05/2009 08:38I'm surprised, there is no answer at all.
Well, the problem has been successfully resolved by installing Vista SP2 RTM. My test program has been run 20 hours and showed no delay.
-
I have the disk as my ex has and there is not talking to him. How do I re register without the key?
Perhaps you can find your key in one of these suggestions:
Quickly find your serial number
You can download CS6 here:
Download Adobe CS6 Trials: Direct links (without Assistant or Manager) | ProDesignTools
-
Vista has stopped turning the games run for a long time.
Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.
Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.
Try running the memory and the hard drive scan to make sure that both are good.
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errorsIf both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.
-
My set-up agency & ABC developed for us. We no longer use the Agency. I have 2 log-ins - but 1) cannot change my billing settings & 2) cannot update models due to lack of access. Need help to change this.
Hi Rebecca,.
You should get in touch with our accounts team to work a solution to your problem. Drop them a note at: contact us | Adobe Business Catalyst
Cristinel
-
I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...
Error code: 3033
"GoTo" label not found
on line 89 of w:\patches\i...ate\windows\installer.wbt
My system is...
Compaq Presario SR1339uk
Serial number: CZB5050HBW
System number: PS267AA
Motherboard: Asus PTGD1 - LA
BIOS version: 3.13 12/14/04
Operating system: Windows XP Home Edition
Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.
Assume that you download SP26760.exe (BIOS 3.28)
Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).
Open a DOS (command prompt). You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.
Once in the BACK, type:
CD FOLDER
go the the directory of temporary files.
Then make a
DIR /S 328.LE ROM
to find the directory where the update files are located. Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)
CD pft467D.tmp
Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches. By omitting the switches can cause other problems, as have reported activation of Windows problems.
AFUWIN /i328. ROM /pbc
For reference, on my system, here's what I saw in these folders:
C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir
Volume in drive C is DRIVE_C
Volume serial number is FE8F-4AA6Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp
26/04/2011 11:11 < DIR >.
26/04/2011 11:11 < DIR >...
24/01/2006 15:31 524 288 328.le rom
01/07/2004 10:54 53 248 AFUWIN.exe
01/07/2004 10:54 amifldrv.sys 6 912
21/02/2006 18:08 526 374 Installer.exe
09/05/2006 17:10 sp26760.rtf 1 784
11/04/2005 10:55 398 696 WBDEG44I. DLL
6 file (s) on 1 511 302 bytes
2 dir 110,361,944,064 bytes freeC:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc
It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do. If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.
For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.
Good luck.!
-DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).
-
Update KB961118 continoulsy appears in my system tray, but the update does not install. How to remove OR install. This has happened for a long time. Help
KB961118 is an option, not the security update. Feel free to hide it & move on with your life. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I have a new iPhone, and told me to let it load for a long time. I let it charge for 25 hours. This can affect my life of bacteria? And what happens if I don't use the phone immediately?
Not at all, you can leave it plugged into the power supply, and it won't hurt the battery. However I am not leaving the phone in a State discharged for a long time. That can hurt so when he approaches zero the load soon.
This user tip can help: when to charge your iPhone or iPad
-
I need a new serial number for my version cs4 premium design mideastern I am owner and you want to load on my new mac with system 10.11.2. yesterday, I got a number and told to download it from your site, but what ends by was not a version of mideastern. I sent rashid, who gave me an email address to write, but received no answer for this question. I always use the cs4 on my imac provious but need to start working on the new and the serial number on my Inbox no longer. Varda
You can retrieve your serial number of your mac to work,
-
Just after the cancellation of my subscription, you asked my credit card for a monthly payment!
I tried to cancel this subscription done for a long time, and now that it's done you keep me!
Please immediately refund my money!
In this case, you must contact and check with Adobe support:
Click always need Help (help), and then select the Chat option:
-
Please can someone help me for a long time out of the payment itun
Please can someone help me for a long time out of the payment of itun, I lost my phone.
This is my information
****
****
Thank you
< personal information under the direction of the host >
OK so tell me first your reason! It of your personal account, why do you give?
Maybe you are looking for
-
Problem Vista Flash Cards on Satellite A200 - 18 M - R6025 run-time error
I recently installed the latest version of the BIOS, and after installation, I see this message eveytime my laptop starts: "Runtime error!"Program: C:\Program files\TOSHIBA\FlashCards\TCrdMain.exeR6025-pure virtual function call" Can someone tell me
-
Set the scale of all the images in a table
Hi all I have a chart 2D photos (say 4 x 4). I want to scale/zoom (all together) by a factor. So I use the zoomfactor property node wired to a digital slider, for any element 1 photo. During execution, only the image element for which I extracted the
-
How can I remove IE8 and back to IE7?
Another that passing through the system restore, is there a way to remove IE8 and revert to IE7? I am quite satisfied with how funcions IE8 and am more comfortable with IE7.I would go back to IE7 if possible.Please advise?A lot, have you-one.
-
computer doesn't restart/shutdown
When I go down at the start and the arrow next to the stop and select stop down, the computer stop open programs, disconnects and says "shutting down", but it never stops really... it just says: he's going to-for hours. The only thing I can do is cu
-
I recently upgraded a V28 application but doing so seem to have lost support in iOS 5 users.I believe that I must not have followed instructions correctly to maintain consistent support for these users using older versions of the app down. I need hel