Need help placing picture in the laptop of a video screen...

I have images that are both zoom and pan, and need a photo image to fit within the space of the laptop screen for the duration of the pan/zoom.  Use 'Track Motion', accompanied by the key-framing in 2D?  Does make sense?  Y at - it a way more easy to achieve this goal, or is - that the route to follow?

Here is a rough take of the clip I'm talking about.  In reality, we will place the same image on the HDTV and the laptop in the shot.  I hope that it will do what I said above a little clearer.  Hope you can help.  Thank you very much.

If you have CS4 then I advise to use Mocha for AE (tracking software system imagineers that comes with AE CS4 planar). It is designed primarily for the kinds of things you have described. There are some useful tutorials on the imagineer systems Web site:

http://www.imagineersystems.com/support/Mocha-AE/tutorials/

Tags: After Effects

Similar Questions

  • I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

    I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

    Hi bardhiboris,

    You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

    Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

    To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I really need HELP! I received the nugel.exe virus on my laptop and I really missed the whole system! PLEASE HELP ME SOLVE THIS!

    I really need HELP! I received the nugel.exe virus on my laptop. I have Windows XP and I was reading how to remove it. They told me to go to click on the Start button in it, then click on run. type msconfig and on the Startup tab, uncheck everything that ends with TSSD. Well, none of which ended in TSSD was there, so I was told everything that had an UNKNOWN manufacturer in buttons SERVICES and STARTUP uncheck. I restarted my computer and the NELSON was always there.  Then suddenly my computer shut down on its own and restarted with a screen that says now "Windows didn't start because the following file is missing or corrupt: \system32\hal.dll .» Please reinstall a copy of the above file. "Does anyone know how to do this? I feel that I've dealt with the virus stupid for days and I'm going crazy! Can someone please help me solve what I did wrong? PLEASE, I BEG YOU!

    Hi ehaze64,

    Looks like you have made incorrect changes in system configuration utility.

    See the Microsoft articles below to solve the problem by installing the recovery console and use the Bootcfg.exe tool to rebuild the Boot.ini file.

    How to install and use the Recovery Console in Windows XP

    http://support.Microsoft.com/kb/307654

     

     

    Error message: "Windows did not start because of a configuration of the disk of the computer problem.

    http://support.Microsoft.com/kb/314477

     

    "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

    http://support.Microsoft.com/kb/330184

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to install pictures from the laptop in I phone plus 6?

    How to install pictures from the laptop in I phone plus 6?

    my name is aditya thakar

    You ask how do I put pictures that are on your computer to your iPhone.

    If so, you need to synchronize the photos on your phone using iTunes on your computer.

  • With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop. Do not install. Party at 3 x through process 80070002. How to fix?

    With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop.  Do not install.  Party at 3 x through process 80070002. How to fix?  3 updates failed to install: KB2779562, KB2705219 and KB2722913.  Constantly configures updates during startup and shutdown.  Takes a long time for the two workers.  Can anyone give advice?

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and 80070002 in C:\Windows\Windowsupdate.log.
  • How to copy pictures from the laptop to an ipad

    How to copy pictures from the laptop to an ipad

    Hello

    Try the methods suggested in the article below and check after each method:

    iOS and iPod: syncing photos via iTunes: http://support.apple.com/kb/HT4236

    If the problem persists, I suggest you to contact the Support of Apple IPad team.

    http://www.Apple.com/support/iPad/contact/ 

     

    Kind regards.

  • Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

    Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

    Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

  • Accidentally, I purchase an upgrade when I was trying to buy Acrobat Pro. I need help in Exchange for the upgrade to what I need.

    I can't find a certain number of support the customer to solve this problem.

    You can contact the Support from Adobe using link below:

    Contact the customer service

    [Click on always need help button and select the Chat option]

  • Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

    Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

    You can try to download instead of using the drive...

    Lightroom - all versions

    Windows

    http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

    Mac

    http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • Satellite Pro L500 - press Fn key blocks the laptop computer to blue screen

    Hi all
    First post so please ask if I did not include all the necessary information.

    I have the Satellite Pro L500-1TX (Win 7 32 bit os) and everything worked fine including the Fn menu drop-down button.

    Now, whenever I press the Fn key, it blocks the laptop to a blue screen. The computer then restarts automatically and that it was an unplanned shutdown offers the usual safe mode option.

    Unfortunately, I do not know when this started as I do not use the fn often hesitate so just do a system restore. I don't know how far back to go. It was several weeks before I associated accidents hit the Fn key.

    Any suggestions as to which Toshiba drivers may need to be reinstalled. The computer otherwise works fine.

    Cheers in advance
    MTV

    Great! Thanks for this feedback that I also found other threads about Support Flash Card utility and it is the tool command keys FN so read the forum in other threads contributes without doubt! ;)

  • Satellite U920T - need help to turn on the WiFi

    Hello!

    I have a laptop Toshiba Satellite U920T.
    My OS is Windows 8.1 x 64 with all updates.
    There is a challenge with wireless which started after I put in place a flight on charm bar Mode and back fired.

    When I disabled the flight Mode, the switch wireless of charm bar is remained handicapped as shown on the screenshot (sorry, all the screenshots are in Russian, but if something is not clear I'm ready to explain)
    http://bit.LY/12HGayL
    The adapter in Device Manager is Normal
    http://bit.LY/1Gd2ygA
    It is the latest version of the driver installed
    http://bit.LY/1Itn4NO
    The Windows Network Diagnostics Wizard detects that the wireless is turned off.
    http://bit.LY/1w84plz
    When I try to enable wireless using the utility of the farm, he pointed out that I should turn the WiFi hardware button
    http://bit.LY/1ItncNd
    But my laptop is not any material for the WiFi button. Only hokey, but it comes to establish a flight Mode.

    Need your help.

    Sincerely,
    Vadim

    Guess, what, I think that there is a problem between the driver and the system and consequently the system reports that the WiFi network is DISABLED.

    I recommend you to uninstall the Intel Wlan Device Manager driver.
    Then, you must restart the laptop.
    Please perform a complete shutdown (no hybrid closed, standby, etc.)

    After the new reboot, install the Wlan driver and reboot once more.
    It would be really interesting to know if you can activate the WLan after this short driver installation procedure.

  • Satellite A500-19U - need help for games and the AC adapter / CC

    Heys guys.

    I got my new Satellite A500-19U and install games on it like COD4, assassin Creed, Batman, Mafia 2 .and much

    All of these games crashes & freezes after screen black or white, 3-5 Min & gimmea and this happenWHILE CONNECT the AC ADAPTER to charge the battery. While using the battery just fine, except some crashes after a long period of palying. Some time, he said (the display driver not responding) & sometimes the screen black or white. The only way to recover the laptop is ALT + CTRL + DELETE and wait until the game to recover & cases laptop stop responding & the only way is to hard reboot.

    The only one that works such fine bit is Battlefield Bad Company 2. Then I change the DirectX (setting.ini) of car in DirectX9.

    SP please any help on this matter. I think it's a video driver or a Windows 7 problem. And the specifications are:

    Processor: Inter Core 2 Due P7450 2.13 GHz
    RAM: 4 GB DDR3
    VGA: Nvidia Geforce G210M with the driver from the Toshiba Site has also tested the latest driver from Nvidia Site Version: 258.96
    OS: Windows 7 64-bit [pre-installed]

    I think that its not big problem for Toshiba co.  :)

    Hi mate

    I think that it is a nuisance driver in most cases not entirely compatible graphics cards drivers are the reason why games dishes t working correctly.

    What to say; I think that the update of the driver is the key
    You will need to find a good driver version
    Toshiba pilot European page you can find the latest drivers published by Toshiba
    But this does not mean that these are the most recent drivers released by nVidia or ATI
    nVidia or ATI drivers are always different

    In order to check the drivers from nVidia page too.
    You can also try the version published on the Web site www.omegadrivers.net or www.laptopvideo2go.com
    But note; These are not tested drivers and use is at your own risk!

  • Need help after you insert the CMS system

    Hi on my site ive inserted a system of Cushy CMS. It all work that is not the problem. The problem is that my page is a mess now... The only thing ive addes is a code cms so im hoping that the solution is not difficult to do.

    There are three pages what is changed full.

    The home page

    http://www.vakantiewoningeninsuriname.nl/index.html

    The text column to the right is less moved. How is it possible to place this back?

    on http://www.Dorff.nl/ you can see how it was before I add the CMS.

    The next page is:

    http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html

    You can see that there is much more space between the head and the text. And you see that the text is not only the anymmore on the right side.

    This is how it should be:

    http://www.Dorff.nl/bezienswaardighedenparamaribo.html

    It goes the same for this page:

    http://www.vakantiewoningeninsuriname.nl/Prijzen.html

    And that's how what it takes:

    http://www.Dorff.nl/Prijzen.html

    Hope you can help, thank you for the research...

    Kind regards Brian

    braico wrote:

    Dear Jacqueline,

    Thank you for your reply,

    I'll try to explain again what is wrong. On my website, you see this page:

    http://www.vakantiewoningeninsuriname.nl/Prijzen.html

    Problem is the image below on the right side of the page instead of the left like the other pictures.

    On:

    http://www.Dorff.nl/Prijzen.html

    You can see what it should look like... Photos to the left and the text on the right. I don't know what happened when im adding the Cuschy CMS. Hope you can see what the problem is.

    You have the two last property on the wrapped page entries in the

    "one_half_last" when that
    must encapsulate the entry of details of each property individually. That is why the last image is more to the right.

    What I would do is remove the entries of two last property (images and text) on the page, copy the code from the entrance of the two property then paste it under twice, making your entries in four properties. Of course, you need to update images and details of the property as well.

    OR if you're good with the code alters entered two details latest properties are isloated in their own "one_half_last".

  • Need help/instruction to swap the DVD/CD on Satellite 5200 burner

    Hello

    who can give me advice how to take that old burner out of the laptop?
    Which screws I release?

    I already tried to free the B6 those and tried to pull not out... no chance.

    How does it work?
    I have to buy a new one in order to get this laptop that works again.

    Concerning
    Andreas

    With the B6 is not bad. Please check where the B20 screw is placed. Near this screw, you will find another one (without number). Remove it and this will allow you to unlock the select Bay.

    Move Style Bay latch in the UNLOCK position. Grasp the module Style Bay and slide on. All that s!

    Good luck!

  • HP KP721AV: Need help, computer father has the blue screen "enter power - on password.

    I need help.  Electricity blimped last night at my father, leaving the computer does not off properly.  We have tried to unplug the unit from the wall to reset, but again it still leaves us with the "power - on Password enter" can anyone help?  Thanks in advance

    Hello:

    Please see the below troubleshooting guide, annex B, page 62.

    http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3785403&docid=emr_na-c01516072&docLocale=en_US

Maybe you are looking for

  • Satellite Pro 4320 - update the BIOS

    Hello Can someone tell me how to upgrade the bios on a Satellite Pro 4320? I downloaded the update of the Toshibas files download area and read the instructions, but in vain. It doesn't seem to be a flash Bios of Windows for the 4320 utillity, so I j

  • Windows 7 glitch on Satellite L500D

    Got the update official Toshiba and installed Windows 7 over Vista Home Premium using Toshiba Upgrade Wizard but now find myself with an embarrassing glitch when filling out forms (guard reset every second) and pages on their edges external flickerin

  • To make the most of eprinting and wireless, I can leave my printer on constantly?

    No was not sure if leaving now would cause problems... seems to be a power mode any. HP Photosmart Plus No. CN216A Model B210a

  • LaserJet Pro CM1415fnw: Error Codes

    Can someone tell me what the error code 59.le CO means? It came after I installed a new cartride and tried other chip or snack just the cartridge was bad. I only use genuine HP products. The error code is not explained ONHP websites and the support.c

  • In gmail, transmitted images do not give

    Gmail forward, no pictures or graphics of transfer.  Recipients report: no photos