Need help: Ps4 controller with Xperia z3

I have had buyed Sony Xperia Z3 last month, I'm not a user of the playstation 4, but I use to play games on my z3 xperia android, I have some games like 3 Nova, Modern Combat 5 in my z3 xperia and I want to buy a controller playstation 4 to play these games with controller, but last week I went to a sony showroom When I asked them, they said that its only for playstation 4, its will not work for other games and not connect with xperia z3.

So please tell me. Is it possible to connect with sony xperia z3 ps4 controller and use it for other android games which have controller connect option like type games Nova 3?

Hi to answer your question, yes it is or at least for me on the games I played.
I played mame4driod that worked without fault and amiga emulator I played real racing 3, asphalt 8, arcade pinball and ZEN pinball and all worked perfectly :-)

Tags: Sony Phones

Similar Questions

Need help on query with decimal places and trailing 0
Community of Oracle I need help in the following situations:

I received the following query:
SELECT (SUM ("VALUE1") COUNT ("VALUE2"))
FROM sometable;

This returns the following results:
200
222,5

I want to display as 222.50 222,5 value so I tried ROUND(value,2) but then came to the conclusion that the tour will not show drags me 0.
So now I tried to_char(value,'9999DD00') and of course he's back 200.00 both 222.50.

Now how to make it conditional so when a number has no decimal place it shows the whole number and when it has a decimal, it shows it in the format to_char(value,'9999DD00')?

I hope I have made my situation and question correctly and I hope a solution.

P. S.
I need to appear like that since it is an average of the prices of the products

Published by: Jnijman on July 3, 2010 13:06
You can use CASES and INSTR:
```
SQL> with t as ( -- generating sample data:
  2  select 200 col from dual union
  3  select 222.5 from dual
  4  )
  5  --
  6  -- actual query:
  7  --
  8  select col
  9  ,      case
 10           when instr(col, ',') > 0
 11           then to_char(col, '999d00')
 12           else to_char(col, '999' )
 13         end formatted_col
 14  from   t;

       COL FORMATT
---------- -------
       200  200
     222,5  222,50
```

Need help get data with the most recent date of entry into
Hey guys;

I need help with fine tuning a query to get the one with the most recent implementation.

Here's my current query:

/**********************************************
Select sge.seal_group_id,
SGE.equipment_id,
SGE.effective_date
of seal_group_equipment EMS.
seal_group sg
where equipment_id = 48801
AND EMS. SEAL_GROUP_ID = SG. SEAL_GROUP_ID
and sge.end_date is null
Group of sge.equipment_id, sge.seal_group_id, sge.effective_date
After having sge.effective_date = max (sge.effective_date)

******************************************************/

Which produces the following results:
SEAL_GROUP_ID - EQUIPMENT_ID - EFFECTIVE_DATE
25-48801 - 01/01/1993-00: 00:00
11730-48801 - 22/08/2003 08:42:11

What I really need, is to show only the line with the most recent date of entry into
I hope someone can help
Thank you
MAX will not work because the SEAL_GROUP_ID could depart. I would say analytical:
```
select seal_group_id,
equipment_id,
effective_date
from (
select sge.seal_group_id,
sge.equipment_id,
sge.effective_date,
RANK() over (partition by equipment_id order by effective_date desc) r
from seal_group_equipment sge,
seal_group sg
where equipment_id = 48801
AND SGE.SEAL_GROUP_ID = SG.SEAL_GROUP_ID
and sge.end_date is null)
where r = 1;
```
Keep in mind if two records have the same effective_date, they would both appear.

Note: query above has not been tested, since there is no script provided.

I have a new backup disk (a disk of 5 TB of Seagate) and need help setting up with CCC!

Hello world

I have a new backup disk (a disk of 5 TB of Seagate) and could use help setting up with CCC.

I did in the past without problem, but I want to assure you of a few things:
One last piece of information: two computers, etc, were all backed up via Time Machine. My data the most important, photos, etc., are also saved on deposit box and/or iCloud on a regular basis.

Thanks for any suggestions or comments!

Sally D.

Delete and partition the drive by making a separate partition for each computer. The iPad and the iPhone is useless their own partition because they back up using iTunes and would appear in the clone of the computer that you use for each save. Each partition must be the size of the current cloned drive that can leave you with additional partitions for other stuff. Then format the drive Mac OS Extended journaled. Do not install any software that came with the drive, none of this is necessary.

I use a very similar setup with a 3 TB drive. I clone my boot SSD in a single partition, my drive internal 1 Tb in a second, my Macbook to a third party, and I have a fourth partition which is currently empty, because I haven't decided what to do with it yet. I also have a 3 to Apple Time Capsule.

Need help - Cisco ASA with the power of fire

Hello

Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

Is it possible if we add firepower on asa 5510... Please guide me... Thank you

Power of fire must be installed on the new series X of the SAA. 5512 x, x 5515, 5525 x, etc.

If you have a 5510, you probably want a 5512 x with an SSD. Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web. Cisco gave its product Web Director, who has done this function.

You can host Web sites behind a firewall of ASA without proxy reverse. And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests. The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption. I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

I need help doing things with batch files

This applies to All THE VERSIONS OF WINDOWS and probably relates more to MSDOS than any other.

cmd.exe or notepad.exe and comand.com applications

I'm doing some kind of Setup.

I have a tool nice lottle I did that works with a batch file. and he has 3-4 text file sthat go with it. I wanted to make a batch file which would act as an installer. make the MainMenu.txt, ReadMe.txt, Credits.txt, DISCLAIMER.txt fill them with the correct values, then make the .bat file that acts as the user interface. and when this launch the batch file under its weight made it has created (and not as a child of cmd window) then delete itself so all that remained was the new files...

I tried the command IF [NOT] EXIST filename command because it's the only IF the syntax I have any slight understanding of

EXAMPLE OF

mkdir EXAMPLE

EXAMPLE of CD

IF [NOT] EXIST MainMenu.txt GOTO CMAIN

: CMAIN

ECHO the text I want to be in the lead > MainMenu.txt

pause

EXAMPLE OF

but when I run the command 'Betainstall.bat' file, it opens and then closes immediately. What would be nice if it was the CASE of WAT I TOLD it to. it doesent need to be opened, because it only creates a directory then makes em fills with files on and its done... but it doesent do anything. and since it closes too quickly it's a bit hard to read all the messages that appears. (im not fast enough for print scrn) and addition of the pause at the end did not a thing. and / k has ever helped me before

so someone who knows nothing about MS-DOS or command prompt this is a great opportunity to showcase the prowess of youre

I just need to find how to get cmd to delete the last entry of Y.

If I could get the Y equal to NULL it should write the %M % and not okay right?

For the first part of what I mentioned above, you can simply do:

SET M =

The M variable will then to null.

However, for what is in quotes: No. get M set to null will do what you want. Use the command I mentioned in my previous post. Note the signs double% to get the result of %M % in the command of the user file.

IF the echo % M %! == 1 ! Goto: whatever > USER - X 2. 0.Bat

Then the USER - X 2. 0.Bat will contain the line:

IF M %! == 1 ! Goto: whatever

Now, from your original:

SET /p M = type OK or CANCEL, and then press ENTER:
IF %M % IS INSTALL OK GOTO
IF %M % IS CANCEL LEAVE
: INSTALL

You can see that if the M variable contains not exactly the capitals OK or CANCEL capitalized (that you specified), then the second half of each IF statement will not be executed. Your sample of what is getting written to the file USER - X 2. 0.Bat, you typed tiny ok and it works again the part of the installation of your batch file because he simply fell thru to the: part of the INSTALLATION.

What you want is a batch program that allows to anticipate all possible ways that the user could answer "correctly". When you check if the variable M is equal to OK, it checks that specifically. All other cases the letters will not be the exact match. That's why I ran three different lines looking for okay, okay, then OK.

The fall same thru happen here:

SET /p M = press on, then ENTER:
IF %M % == y GOTO RUN
: RUN

Because the only thing you're looking for is there it will be Goto: EXECUTION of the IF statement , if (and only if) M is exactly there, but if it is equal to anything else it will fall through to the next line which is your: block RUN. As you have, any response is typical for the "SET/p M = press on, then ENTER", it's going to fall through and get to the: RUN block. The only exception is that if the user presses the enter only key, it will then generate the error message that I mentioned and end the batch file. That's why I used the! at the end of the two %M % and on the end of what we test, such as OK! This test if the user pressed the key entry in itself without the batch file, which gives an error.

So, instead of this:

IF the ECHO %M % == 1 GOTO RUN > USER - X 2. 0.bat
IF the ECHO %M % == 2 GOTO README > USER - X 2. 0.bat
IF the ECHO %M % == 3 CREDITS GOTO > USER - X 2. 0.bat
IF the ECHO %M % == 4 GOTO WARNING > USER - X 2. 0.bat
IF the ECHO %M % == 5 GOTO EOF > USER - X 2. 0.bat

Use this:

IF THE ECHO % M %! == 1 ! GOTO RUN > USER - X 2. 0.bat
IF THE ECHO % M %! == 2 ! GOTO README > USER - X 2. 0.bat
IF THE ECHO % M %! == 3 ! GOTO CREDITS > USER - X 2. 0.bat
IF THE ECHO % M %! == 4 ! Disclaimer GOTO > USER - X 2. 0.bat
IF THE ECHO % M %! == 5 ! GOTO EOF > USER - X 2. 0.bat

Or use which does the same thing, but look more pretty:

IF the echo % M %! == 1 ! Goto: run > user - X 2. 0.Bat
IF the echo % M %! == 2 ! Goto: ReadMe > user - X 2. 0.Bat
IF the echo % M %! == 3 ! Goto: credits > user - X 2. 0.Bat
IF the echo % M %! == 4 ! Goto: warning > user - X 2. 0.Bat
IF the echo % M %! == 5 ! Goto: EOF > user - X 2. 0.Bat

(Upper and lower case for the block names all answer the same, whereas they are not nit-picky as the tests within the statement itself. I put the: before the labels of block in the IF statement so I know it's a label. I left the uppercase EOF because it is an acronym for end of file. And I use IF instead of If since it's a small order and I like it to stand. This bit is just my personal preference.)

Another thing, you can make is for your first redirection in User - X 2. 0.Bat is to use the single > crush entire previous existence of this file. Then for forwarding the following him, continue the > who is the operator 'Add file '.

Better yet would be first to check if the file of the user - X 2. Bat is and give the user the possibility to replace, rename, or to have an abortion.

Clear as mud now? :)

Edit: I just looked and I see that you are already doing the single > for the first time. Pass over my hikes on this part. Laughing out loud

New on routers... Need help pls connect with Primus d-link

Hi all, I'm new here. I am a complete newbie to routers. I just got a Linksys WRT54GL. I managed to plug it in and it works but lost my phone service Primus IE D-link (KVD-1120). I had going from modem to the Linksys router this router for the d-link has however led to d-link and phone does not work.

I called Primus and after waiting on my phone cell phone $20 and 1 hour and 20 minutes later, they were no help other then to tell me that the modem must be connected directly to the D-Link and that somehow, I had to find a way to connect the Linksys router for the D-Link (only 1 WAN and 1 Ethernet port on the back (a).

Someone along the way also told me that I had to reconfigure certain ports or open some more. I don't know how or what is the same.

If someone is able to help, I would appreciate it so. Please guide me through it, I don't know how to find the ip address is if I need to do. (read that somewhere)

Thanks in advance for your help and your patience

If your Modem is already connected to the D-Link router and your phone is also connected to the D-Link router, because your D-Link router has only 1 WAN and 1 LAN Port, then you can connect the ethernet cable between the LAN Port of the D-Link router to the Internet Port on the Linksys router and configure all the settings on your Linksys router.

Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

For wireless settings, follow these steps: -.
Click on the Wireless tab
-Here, select manual configuration... Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

-Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
Please take note of the name of the wireless network (SSID) because it's the network identifier...

For wireless security: -.
Click the sub-tab under wireless > Wireless Security...

Change the mode of WPA wireless security, encryption, select TKIP. Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and do not forget the key.

NOTE: The password must be more than 8 characters...

Once you are done with the settings on your Linksys router, unplug the power to the router Linksys, D-Link router and your modem... Wait 30 seconds and turn on the power to the Modem first, wait until all lights are the lid, then connect the power supply to the router D-Link and after 30 sec connect the power supply to the Linksys router.

Now, check if you are able to go online from the Linksys router.

I need help for online with my new laptop mini

original title: online

I bought a laptop mini JC Penny, which is supported by micrsoft 5.0, everyone don't know how I can get online?

Hi LEEHill H,

What is the manufacturer, brand and full model number and of the notelbook (I want to look it up online to see if there are instructions available)? If you do not have this information, what is the reference number of JC Penny? It come with an ISP account or you plan to use your? How do you intend to connect to the internet (wireless via a router, cable, wireless by satellite link,...)? If you want to install it anywhere (which means a satellite connection), your current ISP is perhaps not able to manage and you may need a separate account for this.

The laptop come with instructions - or links to the online instructions?

If XP is used for network access, then the installer should be easy once we understand how your ISP account is set up and how to access the functions of network configuration (if this is not the full product, but only parts of it). Answers to the questions above should help us determine how to proceed (I hope).

Thanks and good luck!

Need help on PSP with the JDE ERP integration

Hello
We need to implement accounting processes with JDE using FIP Solution accelerator providers.
It seems that Oracle does not provide this integration, please someone implemented, can provide some details will be highly appreciated.

You can go forward with the consultation.

But if you look at the base or FIPSA solution accelerator, these are all business processes that can be built easily internal either using BPMN or BPEL.

I have provided details taking point of FIPSA for EBS you mentioned that oracle provide for that.

Leave that all behind, go build your own set of BPEL/BPMN process to expedite the process of AP/expense in your organization.

Even the adapter for JDE development is very simple as it seems.

If you decide to go forward in the internal system I can help you in all aspects or ODC/RPO/IPM/UCM/BPMN/BPEL/JDE/EBS/TFTP.

Need help to hittest with nested clip.

I am a high school student, make a flash game for a project at school. The project is due tomorrow so I need quick help.
I'm trying to implement a function for a placement test. I am using action script 2.0
I am coding all in one layer not in video clips to not give me a code this format unless nececary.
OK, here's the details.
I have a clip with the instance name src_resolute and I have another clip that is nested within another clip named endbar.
What I'm trying to do, it's when src_resolute strike endbar I want to make the next scene gotoandplay.
The name of the instance of nested clips parent movie clip's background.
If you need more information let me know, but basically what I want to do is when my character (src_resolute) main fact contact with the nested clip (a clip I've drawn inside another video clip) I want it jumps to the next scene or more precisely the scene 4.
Thanks for any help!

If these are instance names, use:

{if (src_resolute. HitTest (Background.endbar))}

No matter what

}

Need help choosing system with PP CS4

I am looking to upgrade my system... and like most, I have limits on what I have available. My current system simply takes long and cannot handle HD playback. It would be great if someone could help me to choose, tell me if you work or just give up and deal with what I got up to a total redesign is possible.
My software is PP cs4 and the projects that I will be working on will include capturing SD and HD, but mostly HD. I'll edit and export to tape SD DV and DVD a few projects will require export in HD. Why I will not go in, I'm going to need to go with a DELL system and can only scrape up to about $1,500.
With that... So here's what I'm looking at:
PROCESSORS Intel® Core™ i7 - 920 processor (8 MB L3 Cache, 2.66 GHz)
Operating system Genuine Windows® 7 Home Premium, 64 bit, English
MEMORY 9 GB DDR3 SDRAM memory to 1 066 MHz - 6 DIMMs
HARD DRIVE 750 GB SATA 7200 RPM hard drive
or opt for the 1 TB RAID 0 performance (2-500GB SATA)
I also have a couple externa 1 GB hard drives
VIDEO CARD ATI Radeon HD 5450 1 GB DDR3
or go for ATi Radeon HD 5770 1 GB GDDR5
or ATI Radeon HD 5870 1GB GDDR5
or nVidia GeForce GTS 240 1024Mo
Well that's what I look at you and it comes in the budget... it will get the job done or loss of time and $? or am I missing something?
I appreciate any input... I can usually make things look, but have little knowledge of the gear.
Thank you
John

John, you can get drives of 1 to less than $100 from Newegg. Dell robs you blind on these things. That of why I specifically mentioned Newegg or similar. It will save a lot of money to take somewhere else and install it yourself.

[8i] need help on query with a subquery/inline using UNION ALL view

OK, first of all let's start with some background info:
(1) I work in 8i
(2) some samples for my problem (please excuse the additional columns of data not used to this problem; I already had the sample laying around tables):

CREATE TABLE     vbom
(
     part_nbr     char(25)     
,     bom_doc_nbr     char(25)     
,     bill_level     number          
,     comp_part_nbr     char(25)     
,     qty_per          number
);
--technically has primary and foreign keys, but whatever...
--part_nbr is your top level (0) parent
--comp_part_nbr is the specific child
--bom_doc_nbr is the parent of the child (comp_part_nbr) and may be either part_nbr or a child of part_nbr that is also a parent

INSERT INTO vbom
VALUES ('SAMPLE-1','SAMPLE-1', 1,'SAMPLE-2',1);

CREATE TABLE     rqmt
(
     comp_part_nbr     char(25)     
,     prnt_part_nbr     char(25)
,     ord_nbr          char(10)     
,     sub_ord_nbr     char(3)
,     qty_reqd     number
,     qty_issued     number
,     date_reqd     date
,     rqmt_stat     char(2)
,     rqmt_type     char(2)
);

INSERT INTO rqmt
VALUES ('SAMPLE-1','','S0000TEST1',001,30,0,TO_DATE('06/01/2010','mm/dd/yyyy'),'AL','ID');
INSERT INTO rqmt
VALUES ('SAMPLE-2','SAMPLE-1','0000054963',001,15,10,TO_DATE('04/01/2010','mm/dd/yyyy'),'CL','DD');
INSERT INTO rqmt
VALUES ('SAMPLE-2','SAMPLE-1','0000032562',001,5,5,TO_DATE('04/15/2010','mm/dd/yyyy'),'IS','DD');
INSERT INTO rqmt
VALUES ('SAMPLE-2','SAMPLE-1','0000022341',001,5,4,TO_DATE('04/20/2010','mm/dd/yyyy'),'SH','DD');
INSERT INTO rqmt
VALUES ('SAMPLE-2','SAMPLE-1','0000043469',001,10,0,TO_DATE('04/30/2010','mm/dd/yyyy'),'AL','DD');
INSERT INTO rqmt
VALUES ('SAMPLE-2','SAMPLE-1','0000071235',001,10,0,TO_DATE('05/01/2010','mm/dd/yyyy'),'OP','DD');
INSERT INTO rqmt
VALUES ('SAMPLE-2','SAMPLE-1','0000061224',001,5,0,TO_DATE('05/15/2010','mm/dd/yyyy'),'FP','DD');
INSERT INTO rqmt
VALUES ('SAMPLE-2','SAMPLE-1','0000033294',001,5,0,TO_DATE('05/25/2010','mm/dd/yyyy'),'PL','DD');

So, my first question was that I needed to find in the table RQMT who corresponded with everything on my VBOM have vbom.part_nbr table ' SAMPLE-1'. '. (Please note, in reality the VBOM table has thousands of rows of data, rather than just the 1 I have planned, some of them sharing the same vbom.part_nbr, others not). In addition to finding all RQMT data corresponding to the vbom.comp_part_nbr to vbom.part_nbr (where vbom.comp_part_nbr = rqmt.comp_part_nbr), I also need to find RQMT data for vbom.part_nbr itself (then, records where vbom.part_nbr = rqmt.comp_part_nbr).

To resolve this problem, I started with the following query:

SELECT     v.bill_level          AS bill_lvl
,     v.comp_part_nbr          AS component
,     v.bom_doc_nbr          AS parent
FROM     VBOM v
WHERE     v.part_nbr     ='SAMPLE-1'
UNION ALL
SELECT     0               AS bill_lvl
,     'SAMPLE-1'          AS component
,     NULL               AS parent
FROM DUAL

It allows me to add a line to the top of the page parent (vbom.part_nbr), which does not exist in vbom.
My first question is, is UNION ALL of the best way to do it, or could I do a kind of instruction based on the line number box (or something) that would be better? (in this application, or in the final query)

Then, I used the above query as a point of view online:

SELECT     a.bill_lvl
,     a.component
,     a.parent
,     r.ord_nbr
,     r.sub_ord_nbr
,     r.qty_reqd
FROM     (
     SELECT     v.bill_level          AS bill_lvl
     ,     v.comp_part_nbr          AS component
     ,     v.bom_doc_nbr          AS parent
     FROM     VBOM v
     WHERE     v.part_nbr     ='SAMPLE-1'
     UNION ALL
     SELECT     0               AS bill_lvl
     ,     'SAMPLE-1'          AS component
     ,     NULL               AS parent
     FROM DUAL
     ) a
,     RQMT r
WHERE     a.component     = r.comp_part_nbr

The problem here is that I have the same results (7 files) with the above query as I do with:

SELECT     v.bill_level
,     v.comp_part_nbr
,     v.bom_doc_nbr
,     r.ord_nbr
,     r.sub_ord_nbr
,     r.qty_reqd
FROM     VBOM v
,     RQMT r
WHERE     v.comp_part_nbr     = r.comp_part_nbr
AND     v.part_nbr     = 'SAMPLE-1'

.. .it does not include RQMT recording for rqmt.comp_part_nbr = "SAMPLE-1'.

To understand what was going on, I ran:

SELECT     a.bill_lvl
,     a.component
,     a.parent
FROM     (
     SELECT     v.bill_level          AS bill_lvl
     ,     v.comp_part_nbr          AS component
     ,     v.bom_doc_nbr          AS parent
     FROM     VBOM v
     WHERE     v.part_nbr     ='SAMPLE-1'
     UNION ALL
     SELECT     0               AS bill_lvl
     ,     'SAMPLE-1'          AS component
     ,     NULL               AS parent
     FROM DUAL
     ) a

.. .and I get exactly this that I wait, 1 card for the SAMPLE-2 component and 1 plug for SAMPLE-1 (i.e. the recording I generated with the UNION ALL).

Then I ran:

SELECT     r.comp_part_nbr
,     r.ord_nbr
,     r.sub_ord_nbr
,     r.qty_reqd
FROM     RQMT r
WHERE     r.comp_part_nbr like 'SAMPLE-%'

.. .and I get all 8 records, whose SAMPLE-1.

So, it seems that the problem occurred when I join my opinion RQMT one online, although both separately seem to work very well.

A point to note: all parts of parent and child may not be appointed in the same way as in my example. SAMPLE-1 could have children of the SAMPLE-2, abc123, 20735, for example.

Any help on this would be appreciated, thanks!

Hello

Concerns of problem by comparing 8 literal characters ' SAMPLE-1' for the 25-character CHAR column that contains "SAMPLE 1".»
17 spaces including the literal or use LPAD or CAST to 25 characters.
For example:

SELECT     a.bill_lvl
,     a.component
,     a.parent
,     r.ord_nbr
,     r.sub_ord_nbr
,     r.qty_reqd
FROM     (
     SELECT     v.bill_level          AS bill_lvl
     ,     v.comp_part_nbr          AS component
     ,     v.bom_doc_nbr          AS parent
     FROM     VBOM v
     WHERE     v.part_nbr     ='SAMPLE-1'
     UNION ALL
     SELECT     0               AS bill_lvl
     ,     CAST ('SAMPLE-1' AS CHAR (25))               -- CAST added here
                                  AS component
     ,     NULL               AS parent
     FROM DUAL
     ) a
,     RQMT r
WHERE     a.component     = r.comp_part_nbr
;

Is there a reason why you use CHAR instead of VARCHAR2? (One reason other than "I can't change it now.", otherwise said.)

Need help setting up with a projector.

Hello
I have a M30X & seem to be unable to set up for use with a projector. I can get it to show the theme of office & my pointer of the mouse on the projection screen, but nothing else. I don't see any program on the projection screen & I want to use it to make PowerPoint presentations. I tried all the basic tips including the wizard, but no luck! Help please.

Hello Lizzie

It's very strange that there is no possibility to see any program started on projector. As far as I know if PowerPoint contains some copy protected files, it is not possible to be shown.

Need help! Working with SQL databases

Hi all

I am currently working on an application that interacts with a SQL database, and it seems to have hit a roadblock.

I have a multi-column list box on my front which is filled with the data extracted from the database. By choosing one of the lines in the list box, another opens showing another set of data retrieved by a generated SQL query. At the moment I only select one line at a time to see it has the data, but I want to expand such that I can select mutiple rows in the list both box and see all their relevant data.

With only one selection, I can switch the index value of the selection of a function table of Index with the database as another entry and build my SQL statement.

But with multiple choices, I guess I have to build a table on the index values and use them as reference to build the SQL statement. And I don't know how exactly to do that.

Here is the code that I currently work for a single selection in the drop-down list.

Any help is appreciated. See you soon.

tdog says:

Hi all

I am currently working on an application that interacts with a SQL database, and it seems to have hit a roadblock.

I have a multi-column list box on my front which is filled with the data extracted from the database. By choosing one of the lines in the list box, another opens showing another set of data retrieved by a generated SQL query. At the moment I only select one line at a time to see it has the data, but I want to expand such that I can select mutiple rows in the list both box and see all their relevant data.

With only one selection, I can switch the index value of the selection of a function table of Index with the database as another entry and build my SQL statement.

But with multiple choices, I guess I have to build a table on the index values and use them as reference to build the SQL statement. And I don't know how exactly to do that.

Here is the code that I currently work for a single selection in the drop-down list.

Any help is appreciated. See you soon.

Regarding the table of construction:

I can see Hat multicolumn listbox you have multiselection enabled and is limited to one or zero element selected at a time. To allow multiselction; Done just right click your multi-column listbox and change your selection to support multiple selected items. The NewVal to the structure of the event should change to a single index number in a 1 d of the numbers indexed table. No coding required. Then just to retrieve all items (since you know the index) and create the quiry. Quiry part, I'm not really (long time no see SQL), but it looks like a loop for to create the chain should do the trick?

Need help to developers with Q5 and Q10

Hi all

Those of you who have BlackBerry Q5 and Q10, could you please compile & run this small application on your device: https://l-homes.org/~leppa/bb10/dpi.zipand post the numbers is displayed?

It will display the resolution of the screen as reported by bb::device:isplayInfo class and calculated from these values of DPI. I only have Z10, but I need to know what are these values on other devices.

Thank you all in advance for your help.

Here is the result of a Dev Alpha C, which is supposed to be identical to the Q10 hardware:

resolution 13090.9091796875 13090.9091796875
pixelSize 720 720
55 55 physicalSize

The release of these three properties DisplayInfo, from file QML (do not use your own code).

Hope that helps!

Need help: Ps4 controller with Xperia z3

Similar Questions

Maybe you are looking for