NEED HELP USING VISTA TO BURN/COPY AN AUDIO CD EXISTING

Similar Questions

• I need help for my printer/scanner/copier to work with my computer

  I have a problem for my computer to connect with my printer/scanner/copier.  I need help!

  Hi GraceEverts,

  ·         What exactly happens when you try to connect printer/scanner/copier to work with my computer?

  ·         You receive an error message?

  ·         What is the brand and model of the printer/scanner/copier?

  I suggest to check the following items and check if it helps.

  To add a printer attached to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

   

  To install new or updated printer drivers to update

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_drivers_install_updatew.mspx?mfr=true

   

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

   

  To install a scanner or digital camera

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/scanner_camera_add.mspx?mfr=true

  Hope this information helps.

• Need help Reparing via USB/burned disc with ISO

  I need help, repair corrupted on my computer files.  I'll explain what are the errors I get and what I have done to try to fix.  Because I feel I have tried everything, I'm thinking to update or repair via a USB port or the drive with an ISO will solve the problem.

  Apparently, everything was going well on my computer until I updated to Windows 8.1.  After I updated, integrated into my laptop keyboard no longer works as well as many other problems of pilot.  I wrote chalk this up to compatibility problems and decided to contact Microsoft Live Help.  Unfortunately, the Microsoft representative could not solve the problem after checking my computer remotely.  They recommended that contact Acer (the manufacturer of my computer).
  After another Office remote access with Acer, they were also able to help me and led me to believe that my computer had been hijacked.  Because the way my computer working fine before the update, I refused the very persistent representative, encouraging me to spend $ 500 to the UN-hijack and install security software, which I already ran.
  1. If my first attempt to solve the problem has been completely re - install Windows 8.  I have reset the factory settings and deleted all the files associated with my computer.  This problem resolved most of the issues I had, including the broken keyboard.  Then I noticed that I was getting errors with Windows Smart Screen Filter and a quick search on this question led me to a few other suggestions.
  2 administrator: command prompt
  sfc/scannow
                               Full check of 53%. Windows resource protection found corrupt files but was unable to solve some of them. Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. Note that logging is not currently supported in offline maintenance scenarios.
  When I tried to open log, "access denied."
  3. I tried using auto repair in the Advanced Boot Options.  Yet once, automatic repair couldn't fix my PC.  I was able to open the log file for this and noted that all of the tests completed successfully, however.
  4. I searched in the Panel > troubleshooting but did not find anything of note.

  5 I also looked a little system information by typing msinfo32 in the command prompt.  Under software environment and looking at the system drivers revealed that about half of them have stopped as the State.

  Objective: At the end of the day, I want to correct all the corrupt system files update to Windows 8.1.  In light of my last experience, I hesitate to do so since he almost broke my computer the last time I did.

  Any help or insight is greatly appreciated.

  Other info: I bought this laptop earlier this year with 8 pre-installed Windows.

  Hello

  ·         You have the Acer recovery disk?

  ·         You have the product key Windows 8?

  ·         What is the brand and model of the Acer?

  Note: I highly recommend back up all your important files and folders on an external storage device before performing any type of repair operating system or upgrade.

  Given that Windows 8 has been pre-installed on your Acer computer. I suggest you to use Acer recovery disk to restore PC to factory settings. For more information, consult the phone manual or contact Acer technical support.

  If you must reinstall Windows 8 or you want to install it on one partition and you do not have installation media, you can create it using the installer of Windows 8. To create a support, that you must use a PC running Windows 8.1, Windows 8, or Windows 7, and it must have the same architecture (32 or 64-bit) that you want to install Windows 8 on PC. You will also need your product key of Windows 8.

  Note: If you do not have a product key for Windows 8, you cannot create the installation media. You cannot use a product key of Windows 8 for this.

   

  Create an installation media for Windows 8

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• NEED HELP - use in Animate gif files

  NEED HELP

  Reduce the Flash to animated GiF file file - reduce 65 KB without any loss of quality? How can I reduce a flash file for this standard of the industry?

  If you make an animated gif which must be less than 65 k, you need to use Photoshop, not animate and keep it under 5 total frames.  It won't be a complex animation with transitions and tweens; It would be fair to turn several different images/pictures.  Take a look at this tutorial I posted above to get an idea of the kind of thing you could do in a few images.

  For HTML5 Canvas in CC host, the source file is still a Fla, but published files will be HTML, Javascript, and images.  Do not build a HTML5 banner unless the plan of the record/media for what you work on him to permit.

  If HTML5 is allowed, you should know how ads are served (through Sizmek, DCM, Adwords, Flashtalking, etc.).  Each adserving company has slightly different requirements in terms of how files should be put in place and how clickTags should be implemented, so I can not give you any other advice, unless you know how your ads are served.

• Need help - domain deleted and cannot add-fault domain already exists - website down

  Trying to reconfigure our domain configuration, I removed the main domain name to add again so that it does not point to an external DNS server.

  I deleted the domain and now when I try to add again, I get the following error:

  Domain already exists.  Please delete all the records associated with this domain before adding it again.

  I have no way to present a plane ticket when I go to help and support and our site is now down from the home page.  I need help as soon as POSSIBLE.

  I was able to submit a case when I switched browsers (Chrome apparently does not display the bar/case of research presentation).  The case is

  OBNW5020171

  The area, I'm trying to add is surfaid.org

  Hey Mike.Avocado26,

  I think I erased the field wildwasatchmedia.com in our database. Can you please try adding it again now?

  See you soon.

• Hello! I have a laptop HP Compaq 6730 s with a windows XP SP2 OS. I need help with my drive burning/writing speed CD/DVD and its ability to play DVD. __

  There an Optiac DVD RW AD-7561 pilot. Before it used to have a 8 X read speed and a 8 X write speed, I can see via NERO everytime I have will burn a DVD. But now the writing speed has become 2 X and therefore more adjustable from a NERO software. And also I tried to burn a DVD every time, he finished but it does'nt displays data that has been burnt at all... I already tried to uninstall this software, rebooted and installing it, thinking that this might well be the cause of the problem, but it's always the same. I even tried to install Roxio 9, hoping that this will solve the problem, but it still shows the same write speed 2 X... His ability to read and burn to a CD is fine, but the problem is when it comes to DVD's just makes a strange noise and takes a long time before displaying the content of the DVD and its ability to burn a data file on a DVD...

  Before this problem occurred, I remember I have inserted a DVD and tried to copy paste its content on my desktop. But while the copy is in progress, I accidentally typed on the eject button while trying to reach for my cell phone, which was placed next to the my laptop cd/dvd drive.

  IM desperate and I need an experts'advise on what to do...

  Thanking you in advance,
  Kirby baki
  KSA

  Hello k. Baki.

  Thank you for your message.  Click HERE to download/install the driver for your device.  There is also a link available at HP that is specifically for the update software to use the Service Pack 2.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Need help with Vista updates

  Hi my computer tried to install Windows vista service pack 2 (KB948465) and update for Windows Vista (KB967723) security. And he said: updates could not be installed error found: 800 b Code 0100. Can someone please help me get this situated

  Hi Corey90,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  1 run (Checksur.exe) system update readiness tool

  2 download and run (Checksur.exe) system update readiness tool. After downloading this tool, it runs a scan of a time for inconsistencies that might prevent future maintenance operations.

  For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  ·         Run the preparation tool the link for Windows Vista 64 bit http://www.microsoft.com/downloads/details.aspx?FamilyID=b950e3b1-3267-41c2-8f10-1fe9a4bfa44d system

  ·         Run the preparation tool the link for Windows Vista 32 bit http://www.microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en system

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100' http://support.microsoft.com/kb/956702

  Step 2

  You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

  Step 3

  Scan the file system [SFC] checker on the computer that replaces the corrupt files on the computer system, follow the steps below.

  1. start and type cmd in the box start the search.

  2 - Click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Additional information: http://support.microsoft.com/kb/936212

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help on Vista downgrade to XP

  Hi, I have a laptop model Compaq Presario CQ40-401AX.

  I get blue screen error during the arrival of disc loading that using Windows SP3

  I followed the instructions given on the forum but yet I still couldn't install Windows XP SP3.

  Here is some information in case of need:

  AMD Turion (TM) X 2 Dual-Core Mobile RM-74
  TOSHIBA MK3252GSX ATA Device
  IDE ATA/ATAPI controllers

  If all those who have the solution to this dramatic problem,

  Please, help me. As I'm fed up with Vista...

  I enjoyed to these nice people who want to help...

  Number of sata. Try to use Nlite to sliptream amd sata driver.

  AMD SATA AHCI Controller Pilot, here

  Important notes:

  1. In Nlite, choose Insert -> multiple driver folder option
  2. Select ONLY x 86 driver for AMD SATA AHCI when asked.
  3. Never choose x 64 driver questioned

  or new AMD SATA driver, only much more convenient to use 32-bit here .

• I need help using the target path tool

  Hi all

  I realize that I need to keep all my code in the main storyline, so now I need serious help with targeting movieclips and buttons, when I use the target path tool (the viewfinder in the action script Panel) it allows me to navigate to the thing I want, but when I use his suggestion it very often does not work , and I find myself using trial and error to get by.  ICAN get stuff to work, but I really have no idea why or how I do it, sorry to be a N00B, but I really think that if I can work that I get somwhere.

  See you soon

  void

  subtlefly72 wrote:

  Thanks kglad,.

  OK, this is essentially what I did, but its been a bit hit and Miss, but maybe now, I can't see why, your last sentence

  of course, all of these objects have which existed at the time your code runs.

  So if I'm making refers to something within a mc and it does not exist on the first image, there will be an error?

  exactly.

  also, what is this.  Object() and Object (parent)?

  I have to be the use of these?

  not when using the code on the main timeline.  "This" refers to the current scope, which is for the code in the main storyline, the main timeline.  What follows is the same:

  This.MC and mc

  This.var1 and var1
  

  And again, I want to know why the target tool gives me a path that does not work?

  I can't tell you much about the tool to the target.  I never used it.  but I tried to test this afternoon and it seems to work fine to target a nested movieclip.  again, you must ensure that this object exists when your code runs so if you're targeting something on the frame 2 (or more) of a movieclip using the code on frame 1 of the main timeline, the reference may be correct, but the object does not exist when your code runs.  There are a number of ways to handle this, if this is your main problem.

• Need help with the attempt to copy of 1 line of text

  Hi all

  I hope someone can point me in the right direction. I use DW for many years and write php/mysql code with it. This weekend, I downloaded and instalt a copy of CS4 new. I am trying to learn all the ins and outs new.

  I use Dreamweaver and am writing a php script. I'm in Code view and I have my page structured with all php at the top of the page code between my <? PHP and? > symbols and all my html form code at the bottom. I am trying to copy a single line of php code in my script to paste in the same script is a bit further in the code.

  I hightlight the line of code using the left button of the mouse and press Ctrl-C. When I do this, DW highlights all the php code of the symbol open until the symbol of closure and the screen display then moves to the top of the page. This same behavior occurs if I pointed out and do a right click to select copy on the shortcut menu.

  I'm just trying to copy one line of code, so it's really very strange to me!

  Should I have an incorrect parameter value?

  Someone else knows it?

  And help at all?

  Thank you

  Dennis

  This has been discussed to death. Simply click on the top item in the area more Like This on the right.

  It is an intermittent problem. I've never met to work on several machines and operating systems. Others find themselves constantly tormented. The key to find out what causes it is to find the common element which triggers the problem. Nobody has managed to do so far.

  It seems that have a change in the page before trying to copy eliminates the problem. Others have also found that the workspace switch clears the problem.

• Need help with Vista not recognizing the .sys file

  Please help me!  I am trying to load a driver USB 2wire on Vista and it does not recognize the .sys file.  Can I convert this easily to .exe, or y at - it another way to achieve this... I am a novice at best here.  Thank you!

  Can you check it out here:

  http://support.2Wire.com/?page=view&article=545

  just to see that you found the driver for the right adapter. It turns out that there are two.

  I won't be able to respond for a while.

• Need help to edit and burn my music on my CD

  Original title: editing music

  I recently downloaded a soundcloud mix dj for my laptop and I would now like to burn the mixture on a CD. Unfortunately, the mixture is 3 hours. How can I change the mix? I want only the first hour to burn to cd.

  Any help would be appreciated.

  I don't know how she copes with large files, but you can change some music sounds / and cut out the pieces with free audacity - http://download.cnet.com/Audacity/3000-2170_4-10058117.html for the info and a download link.

  As always just to play safe and recheck, AV check any file you download before installing it.

  I hope that you can get other suggestions as well, but I think that audacity will do what you want. It may have problems, maybe file etc. format depends on

• I need help using "calendar" in Windows Live Mail

  Problem 1: The 'properties' of one of the "calendars" within the watch WindowsLiveMail give it a READ ONLY status.   The 'properties' of this calendar also lead me to believe that it is filled with information on the birthday of my contact information.

  Q1: How does a calendar WLM to set READ ONLY?
  Q2: How can I change this status so that I can DELETE then?
  Q3: How 'do' a new calendar uses the information from my Contacts?  that is, if I create a 'new' calendar as a birthday or anniversary, how to
  Shoot all the information, anniversary or a birthday, as I said in my Contacts.  Apparently, it's supposed to happen, but it doesn't seem to be.
  Q4: When I set up a REMINDER in my calendar, exactly how I get recalled?  In Outlook, I'd get a pop-up window on my screen in the
  "reminder" calendar.  I have reminders set for all THE birthdays in my birthday calendar, but I have yet to get any form of reminder for any of them.  What I am
  hurt?
  Help!  Please, I beg you.  Thank you.
  Bob
  E-mail address is removed from the privacy *.

  Windows Live Mail is no not part of Windows, it is a part of Windows Live Essentials. (Yes I know the name of this forum is confusing!)
   
  You will get a response much better and more quickly by posting in the forum Windows Live Mail here:
   
  http://windowslivehelp.com/product.aspx?ProductID=15

• Need help using the access list blocking a single IP address

  Basically, I'm being attacked by a massive spammer. I managed to deny him access to our mail server, however, his repeated attempts to connect to the same server is in our file of e-mail magazine. What I want to do is set up a block for its specific IP address in our 2621 router. I tried a few different combinations using access-list, but nothing helped. Can anyone suggest something? Thank you!

  Joe

  Joe,

  If you know that the attack came from a particular ip address, you can create an extended access list and deny that IP.

  access-list 101 deny ip host host of attacker_ip_address e-mail_server_ip

  If the source ip address is random then you must put a sniffer or take a look in the syslog to see if there are any model ID as a string. You can then configure NBAR on the router to mark the package and then drop the packets.

  Here is a link that explains the procedure:

  http://www.Cisco.com/en/us/NetSol/ns110/ns170/ns171/ns128/networking_solutions_white_paper09186a008009c8ad.shtml

  Thank you

  Renault

• Need help using the tabs of the apex to the universal theme.

  I tried using the enkitec boards to create tabs in page apex.

  But I'm unsucessfull and I used the apex as the version 5.

  The theme that I use is universal theme.

  https://www.enkitec.com/Apex/f?p=15300:30310:0:

  Also I'm tired the method too to create tabs below

  Creation of a region of the tab within a page in the APEX

  It's like

  In the HTML header, I'll add the code below

  <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/redmond/jquery-ui.css" type="text/css" /> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.js"> </script> <script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/jquery-ui.js"> </script> <script type="text/javascript"> $(function() {    $("#tabs").tabs();    $x("tabs").appendChild( $x("tabs-1"));    $x("tabs").appendChild( $x("tabs-2")); }); </script>

  Then I'll create 3 region.

  Region 1 > > > create a HTML region (REGION MODEL = MODEL number) and add the code below in the SOURCE of the REGION

  <div id="tabs"> <ul>    <li><a href="#tabs-1">Employee</a></li>    <li><a href="#tabs-2">Chart</a></li> </ul> </div>

  Region 2 > > > create HTML region... Add two fields to the region now, edit the region

  Add the code below in the header of the region to REGION 2

  <div id="tabs-1">

  Add the code below in the bottom of the region to REGION 2

  </div>

  Region 3 > > > create HTML region... Add two fields to the region now, edit the region

  Add the code below in the header of the REGION 3 region

  <div id="tabs-2">

  Add the code below in the bottom of the REGION 3 region

  </div>

  Example: http://Apex.Oracle.com/pls/Apex/f?p=12060:7

  I used exactly the same code... except that my region 2 contains a REPORT instead of two text field and region 3 GRAPHICS instead of text field.

  Kind regards

  Shijesh

  -------

  Please reward the answer if it was useful / correct

  
  

  I used the enkitecs method to create tabs.

  Tabs have been created, but the fields were visible inside.

  Will soon be replicating the scenario of apex.oracle.com

  Maybe someone can help.

  At the same time if there is no easy way to create tabs in apex page please let me know.

  Thank you

  Paul

  Hi pauljohny100,

  pauljohny100 wrote:

  I'd like to learn more about the region view selector

  You have a good resource on it.

  Selector display region is type of region, which shows the navigation links in the form of hyperlinks button for regions where the attributes of the region-> region selector display are set to Yes. Œuvres similar to jQuery tabs.

  Reference: ApEx 4.0 region selector | iAdvise blog (it's blog when it was introduced first in APEX 4.0)

  I have not found any Oracle Documentation on this, but it's taken APEX oracle supported the region type.

  You will find that this implemented in various packaged for example P-Track applications.

  

  Kind regards

  Kiran