Need help with Windows Server Essentials 2012 R2

Similar Questions

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• need help with windows live on my Vista free download

  I need help download Windows Live with my Vista operating system.  I get a screen popup telling me to "Get Windows Platform Update."   I have the following message.  When I check all my updates, none of them appear.  What I am doing wrong?

  1. In the list, select one of the following updates. (Only the update that applies to your operating system appears.)

  2. Update for Windows Vista (KB971644) platform

  • Platform Update for Windows Vista x 64-based Systems (KB971644)

  • Platform for Windows Server 2008 (KB971644) update

  • Update for Windows Server 2008 x 64 Edition (KB971644) platform

  Thanks for your help!

  This forum is for Microsoft Security Essentials, not Windows Live.

  You have to get help from Windows Live Support and Forums:

  Here is the Solution Center: http://windowslivehelp.com/product.aspx?productid=10.

  This is the only Forum for Windows Live ID: http://windowslivehelp.com/forums.aspx?forumid=d3fda415-1e53-4007-8e0c-2a77180ffb1d.  This is where you post for assistance.

• Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  We have recently installed Adobe Reader DC Adobe version on our servers Windows Server R2 2012 and have problems since its launch. Few of the questions that we have seen are as follows:

  1. This version is a little awkward and crashes.
  2. A lot of pop up boxes that appears whenever I open a document.
  3. Whenever I open a document it is a box pop up welcome
  4. It is a little slow to respond between clicks
  5. If I click on options like file. The application hangs and then crashes. (see crash message attachment)

  Any help to solve this problem would be useful.

  Thank you

  
  

  Questions for users confronted with this question:

  1. do you have the preview pane enabled in file Explorer? If so, you can temporarily disable it to see if the problem goes away? On Windows 8, in Explorer, go to the view tab, and if you press the button "Preview Pane", UN-press it. On Windows 7, upwards to the right (to the left of the help icon) there is a button "show preview pane." UN-press it.

  2. ensure that the following directories exist on your machine. If this isn't the case, please create them:

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr

  Replace USERNAME with your username.

  Is - do this 1 or 2 to solve this problem?

• need help with windows update C8000F1A error code

  I need help with an error code that is given to my PC when I try to put up-to-date

  Hello

  1. don't you make recent changes?

  2. This does happen with any special updates or all updates?

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:
  I suggest you follow the steps in the link below and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  It will be useful.

• Need help with Windows 7 key.

  I have a laptop that I had to change the HARD drive due to a complete failure.  I had a Windows 7 key I know has been good and have never used, purchased as part of a package of pc 3.   Now the installation tells me that this is not a valid key.  I paid almost $150.00 for this set of 3 installs for Windows 7, about 5 years ago.

  The old HDD is dead, I tried to connect with a USB key and nothing.   The laptop was working fine with WIndows 10, then the portable HARD drive is simply dead.  I need help with a new key, or at least the one I have to work.  The new drive HARD won't have not all partitions or any attached former windows key.  I can't get past the check of Windows screen.

  Need help please.

  You must use the product key located on the COA sticker (at the bottom of the laptop, sometimes inside the battery cover or access. Once you have located the product key, and then follow the instructions below to change the key of the key from the factory to the key on the sticker.

  

  How to change Windows 7 product key

  http://www.windowsvalley.com/how-to-change-product-key-in-Windows-7-and-Windows-Vista/

• Need help with windows 10 update

  I don't have this icon on my desktop so I can not to update or windows 10 reserve

  need help with this, I want to experience windows 10!

  I need a quick answer, I tried to find a way to book and I can't do anything

  

  Try this tool to upgrade your system: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install

• Need help with Windows Defender

  My first time using Vista on a computer. I would use MS security essentials, but it is said to remove the other safety first. Do I need to uninstall Windows defender? If so, how. It does not appear on my list of program anywhere. Thanks for any help.

  The following threads should help you with your questions:

  MSE and Windows Defender: http://answers.microsoft.com/en-us/protect/forum/protect_start/windows-defender-and-microsoft-security-essentials/5309cb8d-02e1-40e8-974f-0dcedb9ab9fd

  Carefully read this thread: Checklist for installation of Microsoft Security Essentials

  Suggest you review and then download your installer from this link: http://www.microsoft.com/en-us/security_essentials/default.aspx

  I hope this helps...

• How can I change the default port 443 on Windows Server Essentials 2012?

  I'm trying to install on my server remote access, but port 443 is already in use with another server on the same configuration broadband, so I need to change to allow access.

  Also, what should I change on the computers to connect to this port

  Concerning
  Steve

  Hello

  Welcome to the Microsoft community forums!

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserveressentials/threads

  
  If you need to change the port for remote access,

  You can search on a lot after u come and change port 443

  
  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads
   
   
  Hope this information helps.

• need help with windows vista

  I need help, 1 there is an error code 10 on Teredo Tunneling Pseudo-Interface, it indicates that the driver is unable to start. I click on find the solutions button but nothing happens. When I click on the button to update the driver it says it is already up to date. It cannot roll back the driver while he was working properly.

  2nd, Windows Firewall cannot be turned there an error 0x6D9 code and it tells me still the firewall of windows with Security Advanced snap-in failed to load. It allows me to change anything.

  3rd my computer cannot access the internet, it says it cannot detect a connection even if it is connected directly to the modem, in addition, a message indicates the dependency service or group was able to start.

  When I run a diagnostic and repair the check it tells me that the DHCP is not running on my computer. I unplugged my modem and plugged back there and still no Internet. This is a result of the issue of Teredo Tunneling pseudo-interface or it is a separate issue

  Hello

  Question: Error code 10 on Teredo Tunneling pseudo-interface.

  Teredo is a tunneling protocol designed independent platform to provide IPv6 (Internet Protocol version 6) connectivity to nodes that are in IPv4 networks. Compared to other similar protocols its particularity is that it is able to fulfil its function even behind network address translation (NAT) devices.

  The Code 10 error code is generated when the Device Manager does not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Check the steps from the link below and see if the error code 10 disappears.

  http://support.Microsoft.com/kb/943104

  Question: Error 0x6D9 when it turns on the Windows Firewall

  Run the Fixit from the link below and see if Windows Firewall can be started or not.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic

  Question: Cannot access the Internet

  What browser do you use to access the Internet?

  Perform the steps from the link below and see if you can access the Internet.

  http://support.Microsoft.com/kb/937151

  Answer please if you have any questions.

• Need help with Windows Live Mail password

  Microsoft support told me that the only way to get help with my last password is by e-mail or forums and I recorded many positions and got no response.  I gave them all of my personal info to my email account and no response. I called in and no response.  Should I give up on this account?  I got it for more than three years and many court and legal emails were sent there I need.  Please notify.

  I guess that you have a Live account Windows that you do not manage to connect to for various reasons.  Can clarify you what the case, and you can specify that you forgot your password or your user name?

  If you talk about this type of Forums (below) then they are very busy, but eventually you should get a response from Microsoft.  If the problem is that I'm guessing that this is so only Microsoft can fix the problem for you, posters not Microsoft, as we find in this Forum won't be able to do much for you other than to advice on a course of action to follow.

  Reset your password
  https://help.live.com/help.aspx?mkt=en-AU&project=liveidv1&format=B2&QueryType=keyword&query=QAF

  Support e-mail for Windows Live ID.
  https://support.live.com/eForm.aspx?ProductKey=WLID&CT=eformts&b56fbf12-3dcf-4c16-9E21-25f9e35ffe3d&mapquerytype=keyword&mapquery=QAF

  If I remember the way Microsoft handle such problems with the "lockout", it's that they contact you by E-mail (an address that you can still access) and either reset your password or clear the problem after having proved to their satisfaction that you are the owner of the blocked account.  The process is a lot easier if you have (in the setup) provided them with another email address, or installed (and remember) secret an answer to the Question.

  Unfortunately, the whole process may fail and you may forever lose this account.  If that were the case, you should start now to try to get duplicates of important emails from the original sender.

• Help with Windows server 2008 Enterprise Edition

  Issue 01

  I have problems with plug a USB in my server it says found new device, but when I click on the little icon sometimes as an unknown device on the computer and it happens for each USB device y at - it a reason for this and is there a way to fix it I tried to re install windows, but doe some reason my computer doesn't start from the dvd :(
  Issue 02
  When I tried to install 2 hard disks that are dynamic disks it won't let not mt assigned disk numbers or anything that he says only: file not found
  How can I fix that if possible

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Need help with Windows 7 drivers for Radeon HD 7670 m on a preinstalled Windows Pavilion g6-2300sy 8

  Hey, I recently bought a HP Pavilion g6-2300sy with Windows preinstalled 8 and decided to install Windows 7 on it instead, as I'm rates more familiar with it. Now I seem to be running into issues with the Radeon HD 7670 m laptop graphics card, since I can't find a driver that works for her. I tried several generic drivers AMD HD 7000 series, but none of them is not working - Windows continues to give the error code 43.

  How can I fix without going back to Windows 8? Any help would be really appreciated.

  Hello:

  For the g6-2300sy, use the W7 x 64 drivers and software for this model:

  For the graphics, you install only the AMD graphics driver. Do NOT install the Intel driver.  The AMD driver has the graphics for two video cards.

  DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4063&product=5278311&softw... =&

• need help with windows update failures

  I'm really becoming disillusioned and anrgy. In the last 5 weeks or so I installed Windows 7 on at least 11 PCs,... and in all cases, bar 1, I am facing the same problem. I use the Start button, windows update to check for updates after a new installation, sometimes in a few seconds, I get the red error message, other times the normal practice of verification of updates begins. Invariably, nothing happens except the window Windows Update appears to 'disappear' or forget it works, so I start it again, wait forever and finally get the Red writes the error message. I tried the windows online and offline "Fixit and the right sequence is repeated continuously." Yesterday morning at 04:00 [if there are 36 hours] I completed a new installation, over the next 24 hours, I have to have rebooted and retried the windows update at least 4 times. I also tried a couple of different ' FixIt. This morning, becoming almost ready to... Yet once, I tried to use the updates. He did what he normally does... the scan, check... check... NOPE! nothing for you. So I tried the specific 'fixit' MicrosoftFixit.wu.LB.7235772074748435.1.1.Run it tooks ages and ages to complete... but once it was over, no changes because no errors not found. Immediately, I opened windows update via the Start button, click on check for updates... and immediately got written red error with updates. [Screenshots have been taken, timestamped in the seconds between them showing the previous references].

  Can someone help me? Why is - this all of a sudden becomes a common problem? Each PC I put back nine have different configurations, my wireless network has no problem with updates from the manufacturer's websites... SO, WHY THIS ISSUE FROM MICROSOFT?

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Need help with Windows Live Movie Maker and DVD Maker

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  ===============================================
  First of all a question... did you you save the project in a video such as format
  . WMV or. MP4? Or have you just of WLMP project folder?

  I suspect that DVD Maker is to see your movie in one file
  and he has no idea where are your scenes. More than likely it is
  creation of scenes on his own in arbitrary places.

  In order for DVD Maker correctly, identify individual scenes
  each stage must be registered as an individual video clip, then
  the collection of video clips can be imported and each of them must
  become an individual scene.  DVD Maker is supposed to accept
  up to 18 scenes.

  Just an experience you can import your new original
  video clips in DVD Maker and see if it works properly. If
  It does what you want... change and re-record your clips one video
  both will be the fix.

  Good luck...