Need of simultaneous bluetooth and audio HDMI

Similar Questions

• Problem with Bluetooth and audio playback

  Dear Sir

  I have laptop Dell latitude E5430 with windows 8.1 installed I successfully add the device LG HBS 730 Bluetooth headset all drivers are installed correctly but the sound playback in from not headphone the sound is still come from speakers computer, and sound reproduction apparatus, it has speakers / headphones and headset communication options. Here are a few shots that I join you for a better understanding.

  I'm waiting to hear about the problem

  Thank you

  

  Hello Ahmad,

  I would like to know some information about the problem so that we can help you better.

  Have you tried to connect another Bluetooth device? If so, it worked properly?

  Thank you for details on the question and your efforts to resolve.

  I also realize the inconvenience that you are experiencing due to problem of Bluetooth. I will definitely help you.

  This problem can occur because corrupt driver Bluetooth and settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please run this Microsoft fixit and check.
  See this link:
  http://aka.Ms/diag_device

  If this does not help, use method 2.

  Method 2:
  Please Update Bluetooth and audio drivers from the following link and check the number.
  Reference:
  http://www.Dell.com/support/home/us/en/04/product-support/product/latitude-E5430/drivers/Advanced?OS=w764

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Bluetooth and audio of the speaker at the same time

  I run vacation watch I want to be able to provide an audio feature on both an FM transmitter connected to the headphone jack AND Bluetooth speaker at the same time. This way people walking as well as those in their car would be able to hear the music. As it is, I have a system that works, but not both at the same time. With the level of technology that is in the computers in the House these days, that shouldn't be too difficult to configure the software to allow the two outputs. Is it possible to make this work?

  Hello Gerald,

  Please contact Microsoft Community.

  From the description of the question, we understand that you want to provide audio on the two FM transmitter plugged into the headphone jack and speaker Bluetooth at the same time. But unfortunately, we wish to inform you that it is not possible to obtain a taken audio headphone and speaker Bluetooth at the same time. As you mentioned in your post, you would be able to get the audio out through headphone or Bluetooth speaker both. You can check the Web to see if there is any third-party program that can support technology of dual audio output.

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Making the best use of space for the quality by balancing the video bitrate and audio settings?

  I have a few questions about the first export still / encoding in encore. I am trying to create a dvd single layer, where I maximize overall quality using as much space as possible.  The video is 97 minutes, SD 720 x 480, 29.97 FPS and consists of interviews for the most part, as well as b-roll hd cameras and stills, rare title graphic card.

  1. I can use dynamic link to send the sequence that appears to maximize the space available, however I have heard that using DL is generally frowned upon and I myself cannot tell what settings it uses (for example vbr, 2 pass, etc.). Is my interpretation that DL is not the ideal way to go wrong? If DL is just as good as a separate output, is there a way to know what parameters it uses?

  2. I used a bitrate calculator and tried a Min: 3.5 target: 5.5 Max: 8 audio output PCM and I found myself having a little more than 400 MB of unused space. When someone recommended a Min: 5.5 target: 7 output Max 8.5 the file size is too large with a simple DVD layer. I read that it is recommended to use an exit instead of PCM, if the video is over an hour audio Dolby. My question is is it a best practice to balance needs of flow rates and audio and video? I realize, of course, by using more data PCM is 'better', but it is usually best to go on the road to dolby and have more space to increase your video bitrate? What is the audio difference type that requires a high-end system to discern? Y audio data loss is worth for the benefit of video bitrate higher?

  I know it's a lot, just trying to maximize space to get the best possible performance. Thanks for any help/advice you can provide.

  -Nick

  As most of my videos are closer to 2 hours usually, I always used Dolby Digital, PCM takes so much space and I prefer to use this space to increase video quality.

  Note that by default, if you import a .wav (PCM) file into Encore, it transcode automatically that Dolby, unless you have changed specifically the default settings of transcoding in Encore.

  A decent basis for coding rule is 560/minute = bitrate, so 560/97 = 5.77 and I usually just round off a little for menu overhead and margin of safety. This requires using Dolby to 192 k, so I would use 5.6 average bitrate.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Pavilion g6-2014tx: driver Bluetooth and Dolby audio

  I need the audio drivers Bluetooth and Dolby. I tried several bluetooth drivers, but after updating to windows 8 and 8.1, bluetooth option appears even in the settings.

  You are the very welcome.

  None that I know of other than buying an external usb bluetooth adapter.

• HP 14-r019tu: need bluetooth and wifi driver

  I already install all drivers for my HP 14-r019tu by http://support.hp.com/us-en/product/HP-14-r000-Notebook-PC-series/6874538/model/7234387/drivers?cc=u...

  but I can not find the driver for bluetooth and wifi. Thanks for your help

  Hello:

  Here are links to drivers for BT you need and wireless...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130390-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0016

• How to remove missing references and audio files or instruments that popup at launch I need is no longer?

  How to remove missing references and audio files or instruments that popup at launch I need is no longer?

  For audfio missing files: go to the Project Audio Bin, mouse control select unused , and then press DELETE. And then click Save.

  

  Missing instruments or plugins, go to your mixer and remove/Exchange any plugins that have a '!"in all of their slot. And then click Save.

• I need video driver and audio presario sr1403wm

  I need video driver and audio presario sr1403wm

  Marfisi, welcome to the forum.

  I suggest to update XP to SP3.  Then, go to the Web to Realtek website and download the latest driver AC 97.  This will update the audio and video.

  If your problem is solved, please click "accept as a Solution.

• Problem with my Acer Aspire 5552-5686 and 5.1 Audio HDMI

  Hi all, I recently bought a SONY HT-SS380 Home Theatre, and I tried to connect it to my Acer Aspire 5552-5686 by HDMI port. (I have Windows 7).

  My problem is that I have can´t set up the laptop to use more than 2 channels (stereo). I ve been looking around the internet and there seems to be a common problem with this computer, but I can´t understand why or how to fix it.

  I ve tried to install the latest Realtek Audio drivers, the Catalyst Control Center, some Audio HDMI of ATI drivers. I Don t know what else to try!

  Any help?

  Thank you very much!

  This isn't the audio chipset of this system, which I listed above.

  The audio chipset to send the data in 5.1 surround.  The HDMI port would support, if it was sent.

  It is not sent in this way, I listed above.

• How to have separate video and audio over HDMI output Lenovo Thinkpad T410

  I have lenovo T410 and wanted to connect it to my TV high definition. Earlier had problems, but after buying SIIG Displayport to HDMI its job very well. In fact the video and Audio can now be read / listened to on my HDTV via HDMI. However, I have a separate 2.1 computer speaker system, which has much better sound output than my HDTV. Now if I want to see the video on HD TV via HDMI and audio output to speakers for laptop (connected to the 3.5 mm wired 2.1 speaker system), how to do that. I went to SmartAudio settings in the Control Panel, but there is no option of separates HDMI audio to the speakers only.

  I don't want to buy another cable with RGA Audio Converter 3.5 mm female port. Please suggest a direct solution.

  in win 7 do a right-click on the speakers on your lower right corner icon, select playback devices, click on speakers, click on set default, click OK and it should work (sound must come from your computer speakers or the computer 3, 5mm jack)

• Laptop HP TouchSmart 15: Audio HDMI notworking

  Hi team,

  After the upgrade to 1604 10 update Audio HDMI windows does not work in my PC laptop HP TouchSmart 15,

  non - model E6F34PA #AB4

  I tried almost all possiblties Google serach.

  1 put updated driver from compmgmt.msc

  2 re-ntsall IDT Audio driver of Intel

  2. use of the easy software I have updated all drivers.

  but it still shows no Audio HDMI sound source.

  

  When to check event under driver, I found the message below.

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000\4 & 2ffee478 & 0 & 0001 requires installation.

  

  could you please help on this issue.

  Thank you

  Riou

  Hello:

  Here's what you need to do to get the HDMI audio to work...

  Download and save, but are not run this graphics Intel W8.1 driver.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  Download and install this free utility for files.  The 2nd file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, right-click on the file of the Intel graphics driver that you downloaded.

  Select 7 - Zip from the list of items.

  Have 7-zip extract of: and leave it to decompress the file in the file name (sp63750).

  After 7-zip created the driver folder, go to the Device Manager and click on the Audio device high definition with the! Select this option.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and the Intel HDMI driver should install.

  Then restart the PC, and you should have video and audio plays from the HDMI port output.

• 52 "Regza TV Audio - HDMI-output optical audio problem does not

  Hello

  friend of mine has a Regza 52 "LCD TV.
  She's trying to connect its apple TV & Optus Fetch device (cable TV) on the HDMI inputs and then having the audio outpot of optical fiber audio outpot to his BOSE amplifier.

  My understanding is that when you select an HDMI input, then the video and audio must be addressed.
  So you should see the video on the HDMI channel and need to hear the sound.

  What is happening is that she sees the video selected on the HDMI channel, but not audio, the sound heard is actually free in the atmosphere of television station that had been retained.

  We tried all the TV menu options successfully.

  How do we get the optical audio output to be on the instructions of the HDMI input?

  Thanks for the help
  Peter

  Hi Peter

  All this should not be so complicated. Using an HDMI cable, you can transmit video and audio to external device to TV signals. For example, if you use the HDMI 1 port and turn on the V you should see the picture and hear the sound of the TV.

  For audio, you can use an external device like Hi-Fi receiver or this BOSE amplifier. Using the optical audio output of fiber on your TV, you should hear the TV sound look no matter what external device is the source or which channel you. What you see on the TV the sound comes through this amplifier.

  I have this BOSE unit, but all I know is that when you want to hear his amplifier the right port or channel must be enabled there.

  I use my Toshiba TV connected to the Yamaha V537 amplifier with optical cable and it is listed under AV4 port. So when I want to hear the sound on my Yamaha I need to enable port AV4 on it and its is here.
  Some additional settings on the TV are not necessary. Optical output on the TV is always on (see the red light on the inside).

  Check this please on BOSE amplifier.

• Replace the video card and audio lost

  I have a HP m7350n desktop under WinXP SP2

  The plug: http://support.hp.com/us-en/document/c00585745

  I replaced the video card (original) with a Gigabyte GT 440

  http://www.Newegg.com/product/product.aspx?item=N82E16814125366

  The new vid card also demanded a new power supply, so I replaced the original power supply with a Cooler Master GX 450

  http://www.Newegg.com/product/product.aspx?item=N82E16817171060

  When I restarted the computer, I noticed that I had more sound. Not sure if it was important, but even after that I downloaded the latest drivers for the new video card, there is still no sound.

  In the status bar system (or what is called the lower right view), I have more small icons for audio that I used to see.

  If I run dxdiag and click on the "Sound" tab, everything is white with the error 'no sound card found.  If one must, you must install a sound driver provided by the hardware manufacturer. »

  The audio jacks are NOT part of either the old or new video card, so I think that the new video card should not cause this.

  Could I have missed feed somewhere during the exchange of food? If I remember, I have provided to:

  -2 CD/DVD drives

  -The expansion slot empty

  -The hard drive

  -A long connection on the motherboard (it was like 12 x 2 pins)

  -A small connection square to motherboard (2 x 2-pin)

  Any suggestions on what I can is dead wrong, or what I need to check? I am a novice at this stuff, so it could very well be something stupid.

  Also, I suppose, it does not matter, but I also added memory 2x1GB sticks in the empty slots (who does not see the PC, but that's a separate post)

  Thanks for the pointers

  Hello:

  I see an HDMI port on the map output...

  Why what happened?  The answer is that your video card has HDMI that requires a separate HDMI audio chip on the video card. So yes, your videocard DID cause it happens because the PC has picked up map video, disabled the car video (if you have an onboard video) and also disabled the audio system integrated, take on it for audio HDMI on the video card.

  The solution is simple, but almost no one knows about it, so I wouldn't say it's something stupid...

  Go into your BIOS. Looking for an embedded audio setting. It will be either disabled or Auto. Change the setting on " Enabled".  Save the setting here where you made the change, and again when you exit the BIOS.

  When the PC restarts your integrated sound card needs to be restored, and you will also have the use of your audio HDMI when you plug an HDMI cable to your TV.

  Paul

• W500 Bluetooth poor Audio quality

  Hi all

  I recently bought a Bose Soundlink speaker bluetooth and have paired with my ipod touch and w500. IPod Touch sounds good, but the audio through the speaker to come via the w500 looks like it's cut, especially at the fort-normal listening level. The soundlink both the w500 have installed bluetooth driver updates. Clipping occurs even when the main (and iTunes/Spotify) volume are at least 50% of power.

  My question is if there is a way to reduce the 'power' of the bluetooth signal so it does not cause the speaker to distort. Audio read by the speaker through 3.5 mm of the w500 sounds great even at high volume.

  Thanks for any response.

  Hello!

  It's not the cut, clipping occurs in the analog world.

  In the case of Thinkpad Bluetooth - only low bitrate audio is probably set up for A2DP. So you get a large number of artifacts of compression and bandwidth.

  The solution to install a third-party Bluetooth Stack instead of Lenovo drivers.

  I had the same problem with my speakers wireless X 220 and Creative D200. The audio quality has increased considerably with the BlueSoleil software, but I could still hear a few distortions bit.

  Then I tried to install Toshiba Bluetooth Stack, it requires a few changes to the .inf file but can be done.

  The sound quality is now close to perfection.

  I hope that helps! Let me know if you need details.

• Multiple simultaneous Bluetooth connections

  I want to apologize to reproduce my post in another section here, but it seems that here my question would be more appropriate:

  Is it possible for a Blackberry smartphone to function as a Master of Bluetooth in a Bluetooth PAN/piconet? In other words, it can open several ports series to accept/send data from/to several Bluetooth devices at the same time (of course it is not literally simultaneous, time interleaving in the reception/transmission processes effectively reduce the bandwidth for each link).

  I am interested in having a continuous data BB device gains two Bluetooth - permit sensors that constantly streams of data through SPP/RFCOMM. A BB device would support such a scenario? I tried to test this scenario with the Blackberry Simulator, but the Simulator isn't compatible Bluetooth . I don't currently have a BB device to test this on, but I don't want to buy one and then find out that what I want to do is not applicable.

  I was not able to find an appropriate response to this question, and I guess there are some developers who would be very happy if they could have an answer on this. Therefore, I would be very happy to help/clarification of one of the main developers or administrators of the forum that could shed light on this... ;-)

  Is that someone who actually owns a BB device might try to get the next property that returns 'the maximum number of devices supported:

  LocalDevice.getProperty ("bluetooth.connected.devices.max");

  you just need to: import javax.bluetooth.LocalDevice;

  In case, this property returns something greater than 0 or 1, then I can assume that several (up to 7 normally) simultaneous Bluetooth connections can be supported, in which case the available bandwidth would be shared between clients connected to the BB Phone, allowing all the function & communicate simultaneously.

  I would be very grateful to anyone who could try this for me... (the above statement always translates into a NullPointerException in the Simulator)

  As it can be seen in my post about it:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=9500&message.ID=37539#M37539

  a BB device "BOLD" (that's all I can say for sure) is able to communicate with multiple devices Bluetooth SPP/ports simultaneously. The only thing that is needed, is to start a new thread to configure and monitor all serial ports.