Need to create associations in the Panel

Similar Questions

• my computer tells me that (this file does not have a program associated with an association in the Panel options files to perform this action.create)

  my computer tells me that (this file does not have a program associated with to perform this action.create an association in the Panel options files) when I try to click on a link

  Hi rayperkin,
   
  -You are trying to open this link from a Web site or is it an application?
   
  Follow the steps listed in the article given below to resolve this issue:
  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• How to create an association in the Panel Options files

  I try to open an e-mail and it does not allow me to do. It says "this file does not have a program associated with it for performing this action. Create an association in the Folder Options Control Panel. I don't know how to do. I see the article in Q307859. I am very "computer illiterate! Help!

  Which opens with Windows Media Player.

  Create a file association.

  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Windows Media Player.
  6. check: always use the selected program to open this type of file.
  7. click on OK.

  This should allow you to open these attachments directly from email address now.

• create associations in the default programs control panel

  I use Windows 7. When I go to my photos and do a right-click on a photo and go to send the picture by e mail I receive a notice 'no file association, to create an association in the default programs control panel. I run g. Im not computer savvy very mail any help would be appreciated.

  Hello

  a. what email client you have installed on your computer?
  b. how you try to access gmail on your computer?

  If you have any mail client installed such as outlook, then you can set outlook as the default e-mail client.
  If you use gmail from Internet Explorer, then you may not be able to set as the default program.

  Hope this information is useful.

  Umesh P - Microsoft Support

• file c:\WINDOWS\Systems32\notepad.exe__This does not have a program associated with it for performing this action. create association in the control panel of link value.

  everytime I open a program that this message arrives I want help please remove or fix the problem if possible

  Hello

  When you double-click a. EXE file, the program may not start, instead, it can open in Notepad
  (view the contents of .exe), or you can jump into any other application.
  http://WindowsXP.MVPs.org/exeasso.htm

  Restore the .exe Windows Vista file association, after badly with another application
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  If necessary:

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Open PUB file attachment that I did not, says set association in the Panel do not know how. Someone can help me.

  The message has an attachment that comes from an old version of my computer and the flyer in the attachment was conducted in the PUB file.  The box arrived that I don't have the file to open it and go to the tool, the information bar and click on unlock and it does not work either.  He also says to define the association Panel and I don't know how do either.

  Please can someone help me get this open.

  SASSIE

  http://Office.Microsoft.com/en-us/Publisher-help/where-is-the-Publisher-Viewer-HA010233906.aspx

• How can I create tabs of the panels using Dreamweaver CM³, similar to the Spry version available in CS6?

  I used Spry tabbed panels in a site. Need to recreate this page on another site using Dreamweaver CC. CC has no Spry component. Can someone suggest a 3rd party method produces or alternative to make similar panels on a page without having to hand code html-css-java?

  Here's a JQuery solution

  http://www.jqueryscript.NET/layout/responsive-jQuery-tabbed-panels-plugin-Tabber.html

  or you can copy your Spry of the other site files and change the contents

• What privileges are needed to create XMLIndex in the scheme of someone else?

  Hello
  
  I am logged in as 'system as sysdba' and try to create a XMLIndex in another scheme called 'eventschema '. The command fails with "ORA-01031: insufficient privileges". How is it, I can create a relational index in eventschema, but not a XMLIndex? What a privilege system or eventschema must? I gave UNLIMITED_TABLESPACE to eventschema already, but that has not solved the problem.
  

  SQL> show user
  USER is "SYS"
  SQL> describe eventschema.event;
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   EVENT_ID                                  NOT NULL NUMBER(20)
   EVENT_UUID                                         VARCHAR2(50)
   RECORDTIME                                         TIMESTAMP(9)
   EVENTTIME                                          TIMESTAMP(9)
   EVENTXMLTEXT                              NOT NULL XMLTYPE STORAGE BINARY
   PARENTID                                           VARCHAR2(100)
   DOCUMENT_ID                               NOT NULL NUMBER(20)
  
  SQL> CREATE INDEX eventschema.idx ON eventschema.event(parentid);
  
  Index created.
  
  SQL> CREATE INDEX EVENTSCHEMA.eventXml1 ON EVENTSCHEMA.EVENT (EVENTXMLTEXT)
  INDEXTYPE IS XDB.XMLIndex
  PARAMETERS (
   'XMLTable eventXmlTable ''/ObjectEvent''
      COLUMNS action VARCHAR(15) PATH ''action'' 
   ');  2    3    4    5    6  
  CREATE INDEX EVENTSCHEMA.eventXml1 ON EVENTSCHEMA.EVENT (EVENTXMLTEXT)
  *
  ERROR at line 1:
  ORA-29958: fatal error occurred in the execution of ODCIINDEXCREATE routine
  ORA-01031: insufficient privileges

  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  Any help is appreciated!
  
  Thank you!
  -Daniela

  Just to be clear schema account EVENTSCHEMA is missing from the privileges, not the account that is running (like the conn / as sysdba proven)

  Start first with

  grant create any directory, drop any directory, connect, resource, alter session, create view to EVENTSCHEMA identified by {password}
  

  Published by: Marco Gralike, July 16, 2011 16:55

• This file does not have a program in association with it. Create an association in the folder option control panel

  I can not open the photos as attachments in my outlook express 6. I get the following. "This file does not have a program in association with it. Create an association in the Panel options forder. »

  I use xp sp3.

  When I save the image on my hard drive I have no problem opening it.

  I'm sorry I didn't read your response completely, will try what you suggested

  Thank you.

• How can I fix an error message telling me to an association in the control panel so I can get email brochures sent to me .___error message in the email

  I get an error message sent to me when I try to pull up different sent pamphlets the error indicates that this file does not have a program associated with it to perform this action, Create and association in the Panel of the Association.  I have not the slightest idea of what it means and its quite annoying can someone help me.

  What I had was the .doc extension.  Go to start / Default programs / associate a file or Protocol with a program / and find the .doc extension.  It is associated with a program that can open and read .doc files (such as MS Word or Word Viewer or write OpenOffie)?  If this isn't the case, you will need to install one of these programs to establish the association and allow you to read the prospectus.

  If you already have one of these programs and the association is already in this program (and you can open .doc files other ways except these brochures by email), then it may be something wrong with your email client or Microsoft Word program.  It is also possible, there is something wrong with the flyers - can you open other accessories .doc in your e-mail program?

  I can't refer you to help with the e-mail software because I don't know which you use; However, you may need to repost your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where issues of speech specialists will be more than happy to help you with your problem.

  If your e-mail client is Outlook, send to: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.outlook.general&lang=en&cr=US where experts in Outlook will be more than happy to help you with your problem.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Why can't deselect files associated with wmp12 in the Panel types?

  Under set program Associations in the Panel applet control default programs - I can't deselect any of the checkboxes for the types of files associated with WMP.  I can choose the few steps that are already associated.  How to do this?  Words cannot describe how horribly WMP 12 is suck compared to previous iterations, unfortunately I have not yet found simple, easy to use media player better.

  Probably cos you have no alternative installed.

  There are many good (and bad incredibly) other players on the internet. Google and you'll know!

  If you have already installed an alternative solution: make a right-click on a music file you want to play and in the context menu, choose open with. You get a list, select your new player, more brilliant, make sure that the always open with box is enabled and then whenever you click on a type of said folder your new player goes, well, play. You will need to do that for all the files of types which, in the past, you used WMP for.

  If you're still looking then VLC is an excellent multimedia (free) replacement for WMP can play 99% of the media files that you throw, out of the box. During installation, you can associate whatever files you want to open when you double-click it.

  See you soon,.

  Jerry

• Create association and viewLink does not properly

  Hi all

  I use JDeveloper 12.1.3 and everything's fine, but now when I want to add more tables business component, the entityObjects and the Viewobjects is generated correctly but without associations and the viewLinks

  I can manually create associations and the viewLinks but I have 100 table.
  
  I hope that you can guide me to the solution

  Thanks in advance

  Hello

  It will be difficult. In my experience (I hope I'm wrong) the only time where I see associations created automatically when you follow the instructions in the wizard and include each table involved in the Association. If you first create departments view. And the start of the wizard again, this time create employees of BC, then you will not get the assoc / viewLinks.

  Another thing I noticed is that if you right click on EO-> synchronize with the database after adding a foreign key in the comic book, JDeveloper creates actually associations for you, but not the link of the display.

  I hope that someone knows better and give you an appropriate solution.

• Need to create and add RDM disk while calling reconfigVM

  Hello

  Now I create RDM disk help createdisk method and then added the disk of the virtual machine by using the reconfigvm method using vsphere sdk in c# but I need to create and add the disk while calling the reconfigVM only. I searched and found a code as example.

  diskSpec.operation = VirtualDeviceConfigSpecOperation.add;
  diskSpec.fileOperation = VirtualDeviceConfigSpecFileOperation.create;

  ". According to my understanding, vmdk file can create while adding the LUNs as disk RDM using both add and create function, but then I try these i couldn't succeed. If anyone has tried what can you share your code or suggestions please.

  Thank you

  Vijaya

  Vijaya,

  I guess that how you specify the devicename property is invalid. You just need to assign the devicename you recovered in QueryConfigTarget to the devicename of the backup file.  Please refer below snippet for adding disk:

  Request for more information on specific devices that can be used to back up virtual devices

  CTAR ConfigTarget = cb.getConnection () .getService () .queryConfigTarget (envBrow, hostmor);

  VirtualMachineScsiDiskDeviceInfo [] arrSCSILun = (VirtualMachineScsiDiskDeviceInfo []) ctar.getScsiDisk ();

  HostScsiDisk drive;

  If (arrSCSILun! = null) {}

  for (int i = 0; i)< arrscsilun.length;="" i++)="">

  disc = arrSCSILun [i] .getDisk ();

  If (disk == null) {}

  continue;

  }

  else {}

  deviceName = arrSCSILun [i] .getDisk () .getCanonicalName ();

  }

  Add a disk
  VirtualDeviceConfigSpec diskSpec = new VirtualDeviceConfigSpec();
       
  diskSpec.setFileOperation (VirtualDeviceConfigSpecFileOperation.create);
  diskSpec.setOperation (VirtualDeviceConfigSpecOperation.add);
       
  VirtualDisk disk = new VirtualDisk();
  VirtualDiskRawDiskMappingVer1BackingInfo diskfileBacking = new VirtualDiskRawDiskMappingVer1BackingInfo();
       
  diskfileBacking.setFileName("");
  diskfileBacking.setDiskMode ("persist");
  diskfileBacking.setCompatibilityMode ("physicalMode");
     diskfileBacking.setDeviceName (deviceName); It's the devicename you got above
  System.out.println ("DeviceName assigned is" + deviceName);
  disk.setKey (new Integer(-101));
  disk.setControllerKey (new Integer (diskCtlrKey));
  disk.setUnitNumber (new Integer (0));
  disk.setBacking (diskfileBacking);
  disk.setCapacityInKB (1024);
       
  diskSpec.setDevice (disk);

  And to set the loglevel, please visit: http://kb.vmware.com/kb/1001457

• I need to create an association, in the control panel of the associations set to open a .i file seems to have lost this program to do?

  Could not open a file, the message came, I need to create an association in the control panel be greatfull advises you on how to do this thanks Brian Jones.

  Hello

  What is the file extension?

  You must have this program installed to open this specific extension

  If it's a file .doc, you must have Word installed

  If a .xls Excel file must be installed

  etc.

  read this:

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

• How to "create an association in the Set Association Control Panel".

  When I try to open certain e-mail messages (files), I am told to "create an association in the Set Association Control Panel.

  I can't open these files (e-mails) because I don't know how to perform the task.

  How can I do this? Where can I find this control panel?

  Why do I sometimes get this message, but not always?

  Hello

  You must have the program installed to be able to read the attached files that programs

  for example, if it is a .doc file in the attachment, you installed Word

  .xls, you need Excel

  . PPS, you need Powerpoint

  etc.

  but fortunately, there are FREE viewers provided by Microsoft for the accessories of extension file above that will save you having to buy Microsoft Office

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  and you can try the FREE Open Office applications game to read these file extensions

  http://www.OpenOffice.org/

  and here's how to set file associations

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036