need to reduce space between chips in the lists and the left margin. Help

Similar Questions

• OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

  Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

  HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

  HI @philg2,

  I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

  I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• Align the balls on the left margin in Livecycle

  There is no option in the paragraph box to decrease not only to increase.

  I want the bullets to align the left margin and not indented.

  Help, please!  Thank you!

  Hello

  By editing the text in the XML Source view, you can get what you want, it's very tedious, you will probably need to copy into another XML editor.  But here's a sample, and if you pay attention, you should be able to cut and paste points point anywhere in your form and change the text.  The sample has two text with me to XML editing and the other controls using the paragraph options.

  https://sites.Google.com/site/livecycledesignercookbooks/home/bullets.PDF?attredirects=0&d = 1

  Bruce

• IE 7 does not take into account the left margins

  I just upgraded to IE 7 to begin to test my Web site and noticed that IE 7 ignores the parameters of left margin on left floats and all pages in my basket. The CSS is basically the same thing for the main site and the shopping cart, but for some reason any IE 7 uses the left margin of my main website, unless there is a div floating left, but in my pages of basket shopping with the same CSS code, he ignores the left margins all together. The only difference is that the shopping cart uses tables for layout. I removed the main layout tables and used my CSS div. All the world did this experiment with IE 7? Is there any solution for this? Thanks for any help. JD
  Homepage display fine http://www.discwritecd.com
  
  Subpage with left float - no room left http://www.discwritecd.com/media.htm
  
  My basket - without floats but no margin left http://www.discwritecd.com/sunshop/html/15-Second-Video-Ad.html

  Well apparently I did something on some pages that has been set by the Holly Hack, which apparently IE 7 bed is no longer.
  This is the Holly Hack, who was in the original CSS file:
  / * WinIE5 has the following selector to display the padding in #content. This comment may not be in the switch or it will trigger the end of the skin of the Jersey. */
  / * hide from MacIE------* /.
  * html #content {}
  height: 1%;
  }
  / * end hide * /.

  Once I deleted it from the main CSS file and put it in a specifec IE CSS file everything has been right once again. And of course he hasn't needed the selectors MacIE stars hide more is simply:
  #content {}
  height: 1%;
  }

  For anyone who is still trying to figure it all out, rather than create a separate file, this could be done in the header of each page after the link to the main CSS file, like:
  

  However since my cart is dynamic php, instead add the code to each page, I had to add a line of code in my header template file as follows:
  

  I still had to change all static HTML pages in my site which is a pain. JR

• What is the wheel yellow in the left margin of the subject field of the thread pane?

  Today, some, but not all of the unread mails had a small symbol yellow like the Sun wheel in the left margin of the pane Inbox thread.
  The symbol appears in the same area where the other e-mails can have small arrows indicating that I responded to an email.

  When I click on a such mail, it goes to State reading (normal font as opposed to "BOLD"), and the wheel also goes.

  While trying to ask this question, I had to request a reset password, and after you receive that mail, the last unread message remaining which had this wheel, had more of her. I am therefore unable to make a screenshot showing the symbol. However, it consists of a circular yellow box with a large number of short black lines in the radial direction, places evenly along the perimeter inside the yellow box, forming a ring or radial lines.

  If you know the symbol, what you call it? What he's trying to say?

  In which case it is important, I use an IMAP account.

  Looks like it's the new message indicator when using threads messages.

  List icons.
  http://KB.mozillazine.org/Icons_-_Thunderbird

• Is it possible to move email accounts in a different order... in the left margin, when you have multiple e-mail accounts

  I have several e-mail accounts. As I added each e-mail account, Thunderbird added their order entered. I would like to change the order in the programming on the left margin. for example ".
  Joe@123
  Jim@123
  George@123 it comes to existing order, but now I want to

  Jim@123
  george123
  joe123
  I know I could delete and add in a different order, but I have thousands of emails that I don't want to lose.
  Any suggestions would be greatly appreciated,

  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/

• Web site fidelity problem - when filling out forms for 5 tables of column, the left margin print with a left margin of 3 inches, thus losing the 3 columns on the right of the printed table. d instead prtints with 3 inch r

  The url of the problem page is shown below. When the 4 additional columns will have been completed and sent to the printer, the left margin is 3 ", which does not show the 2 right hand colums in portrait mode.
  Before installing latest versions 5 and 6 of Firefos all columns have been printed.

  In my first attempt (Firefox 6), he did cut the 2 right columns, so I followed the advice of the-edmeister and changed to landscape. Then I reset my portrait layout and with "Shrink to the width of the page" checked, all 5 columns show in portrait view.

• PSC 2510 double prints the left margin - transport stops

  Hi, my 2510 double print the left margin so as to look as if the letters are ghosts, now it started to leave a wide width of letters about an inch from the left margin. At the same time, he will start a print job only to have the transport stop about 1/4 of the way, I have manually position the carriage to the position of Park - the menu says so is printing - it is not. I unplug the AC for 10 seconds and when I reconnect the printer resets and continues its merry way, until at the latest.  Thank you Kent

  You probably have a buildup of ink on the MICR band used by the printer to tell where is the transport.  Gently clean the Strip as shown here.  Don't forget to respect the warnings, if you do not you may damage the delicate MICR band.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Vertical line on the left margin of all pages printed (1200 HP)

  Hello:

  Everything I print, on some paper, a vertical line scraggly appears in the left margin area. In my view, it is ink that has leached out, but I don't know where or how clean it. Ink cartridge seems solid. TIA and Happy New Year.

  COS

  Take a look at your fuser unit, could be something wrong with that.  Make sure you leave cool before you go poking in there.  If this isn't the case, it might be a mark on your imaging drum.

• the left margin is shifted to the left

  Hello.

  I have a problem during the copying.

  When I copy an original copy, the left margin will move to the left side on the copy.

  In addition, the text is not correctly printed on the copy.
  The image is rotated counterclockwise approximately 1 degree - the right side is higher than about 3 or 4 mm then the left side.

  Is it possible to calibrate the printer so that the copy be like the original?

  Thank you very much.

  Best regards.

  Phantolix

  Thanks for the information.

  I will bring it to the store where the product was purchased.
  Photosmart 5510 is only 6 months old and still under warranty.

  So, you can close this topic.

• When I print from Windows Live Mail, the left margin is far more than the first letters of each line are missing. Where can I go to change the margin?

  When I print from Windows Live Mail, the left margin is far more than the first letters of each line are missing.  Where can I go to change the left margin on Windows Live Mail?

  Print settings are in Internet Explorer, the file (ALT + F keyboard), Page Setup

  Increase the left? the margin of

• How to reduce the space between icons on the desktop?

  I want to reduce the space between icons

  Right-click on the desktop, select "Display", uncheck "auto arrange" and snap to grid "if they are checked, then move the icons in the desired position.
  I hope it works for you.

• Cannot enter spaces between words in the Message Outlook Express rule

  I had to re - set up of operating systems Windows XP Pro on top of the existing system without reformatting the hard disk. Now, I noticed that when you create a new message rule, I can't enter a space by the shift to separate words in entry for example "of". I'm used to be able to type in a space between words such as the names and surnames of persons before the re-establishment. When I type the words as they appear as, e.g. "JohnMcKay" instead of "John McKay", which is what I intend to enter if Outlook Express is to process the mail entering this sender as I will. In the previous implementation of the operating system, there was only a user named 'administrator '. Now, there is always a single user with my name appears as an administrator of the computer. Maybe I shouldn't have typed in my name as the user of the computer during the installation and instead should have typed 'Administrator' only as a user. I don't know if that makes a difference in the consequences of the new organization of the operating system. I would appreciate any suggestions to overcome this problem.

  I have no idea if the way that you have installed XP has nothing to do with it. If so, I can't help. But, a few questions...

  1. Why should you use the Shift key? The space bar works for me.
  2. Why is it you enter the address of the person instead of their name?
  3. You can try this to see if the registry is damaged. It is common in OE.

  1. close OE, then in Regedit, navigate to this key:

  | - HKEY_CURRENT_USER
  | - Identities
  |-{GUID}
  | - Software
  | - Microsoft
  | - Outlook Express
  |--------------------5.0

  where GUID is the Global Unique identifier for your identity.

  2. under this key, you will find the following between subkeys
  others:

  | - Block senders
  |-----------------------Rules
  | - Signatures

  Select the key rules and delete it. Message rules will be empty, but you can rebuild them now.  Note This will remove all rules.
  

  If that does not do it, maybe it's the equipment and I don't have any additional advice.

• I would like to add a text box to an existing pdf. However, there is little space between paragraphs in the pdf document. Is there a setting that will "push space" between paragraphs as the text box is populated?

  I would like to avoid and the reorganization of the entire document to increase the space between paragraph. I chose multiline scroll but it seems to just give me a rather scroll bar to increase the real estate.

  No, this isn't a feature of PDF forms created in Acrobat, only of those

  created using LiveCycle Designer.

  Tuesday, July 21, 2015 to 18:48, cassandral65569744

• Maintaining the space between elements in the xslt file

  Running on 11 GR 1 material...
  
  Try running an xslt to output html... transformation and the transformation deletes the space between my 2 items... (the space between John and Smith is removed)
  

  SELECT XMLSERIALIZE (
            CONTENT XMLTRANSFORM (
                       xmltype (
                          '<data><column name = "USER_FNAME">John</column><column name = "USER_LNAME">Smith</column></data>'),
                       xmltype (
                          '<?xml version="1.0" encoding="UTF-8"?>
  <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
  <xsl:output method="html"/>
  <xsl:template match="/">
  <html>
  <body>
  <p>
  Hello <xsl:value-of select="/data/column[@name=''USER_FNAME'']"/> <xsl:value-of select="/data/column[@name=''USER_LNAME'']"/></p>
  </body></html>
  </xsl:template>
  </xsl:stylesheet>')) AS CLOB)
    FROM DUAL;

  Outputs:

  <html><body><p>
  Hello JohnSmith</p></body></html>

  What I've read, this is the standard behavior... the only thing I could do to get this working was to add an xsl: Text with XML: Space = "preserve".
  

  SELECT XMLSERIALIZE (
            CONTENT XMLTRANSFORM (
                       xmltype (
                          '<data><column name = "USER_FNAME">John</column><column name = "USER_LNAME">Smith</column></data>'),
                       xmltype (
                          '<?xml version="1.0" encoding="UTF-8"?>
  <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
  <xsl:output method="html"/>
  <xsl:template match="/">
  <html>
  <body>
  <p>
  Hello <xsl:value-of select="/data/column[@name=''USER_FNAME'']"/><xsl:text xml:space="preserve"> </xsl:text><xsl:value-of select="/data/column[@name=''USER_LNAME'']"/></p>
  </body></html>
  </xsl:template>
  </xsl:stylesheet>')) AS CLOB)
    FROM DUAL;

  Part of the problem is I am also generate the xslt of the model user seizures... user enters the code for creating simple templates, I run it through various regexes to generate an XSLT that... before you run the XSLT on xml data.
  
  Example:
  

  <p>Hello {{USER_FNAME}} {{USER_LNAME}}</p>

  This snippet is entered by a user and transformed in the xslt above... It seems to have to replace all the white spaces with xsl elements: Text empty a little problematic... I was wondering if there is a more elegant solution?
  
  Thanks for the help and advice!

  Hi Jason,

  From what I understand, the problem is not about properly return a space in a document of XSLT (there are several way to do in fact), but rather on the creation of the XSL piece out of the model defined by the user.
  OP use a search and replace on tags custom in the model, so there maybe is complicated on the mixed complex content.