Need to reinstall everything... Ugh!

Similar Questions

• Several errors in Final Cut Studio. I just need to reinstall everything?

  Hi, I was tolerating a lot of mistakes in my Final Cut Studio edition for a while now, but I decided to try to correct them, because they really get in the way, I listed below...

  1. I often get errors of the 'out of memory', especially when rendered. Often I just close Final Cut and re - open, then when I make it works fine. Ideally I would not get the errors at all well. Any suggestions?

  2. I use text in my videos, I often put the date at first. I use some plugin text generators that I love. They worked fine for awhile but lately occasionally text randomly goes into random numbers and letters, see the image below, it was supposed to read "February 2016'...»

  Again, I work around him, I'll usually just replace the text and it works but I had rather not encounter the error at all, please advise.

  3. sometimes, usually while I export with compressor, final cut pro all of a sudden don't stop, no warning or error message, it will be just close itself and I'll lose any work not saved. I work around this problem, but just save often but once again, it's a problem that I could do without. It also blocks the export, I have to start over.

  4. as well as the point above, sometimes the export crashes into the compressor without final assembly crashing at all. It stops just export and he said: General error: 0.

  5. I also often get a message that reads 'General error' when I use Final Cut, I think that might be associated with the plugins of text once again, but I'm not entirely sure. Usually when I close Final Cut and re - open, the error disappears.

  My plan is to uninstall and reinstall Final Cut Studio, but I'm just posting this here to see if anyone can enlighten us.

  Also, I have a lot of presets which I don't want to lose in Final Cut Studio, so I wouldn't rather uninstall it but if I have to uninstall, I would like to know what I have to do to keep my presets for example export in compressor settings.

  I know that this is quite a big post, but any help is really appreciated, thank you.

  Here are the details of the machine...

  iMac

  21.5-inch, late 2012

  Graphics card: NVIDIA GeForce GT 650 M 512 MB

  Serial number: DGKKH08LDNMM

  OSX Build: 10.9.5 (13F1603)

  Processor: 3.1 ghz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  It has the following hard drives...

  1.11 to disk fusion, with 692,58 GB of free

  10TB external SAS drive, with 2.9 to free

  Boot disk 12,01 GB, with 4.65 GB free

  I hope that's useful, thank you.

  1. This error can occur if you have formats on the timeline in FCP dislikes, such as H.264 or MP4... basically any codec issue not covered by the program. ALSO... This can happen if you stills that are greater than 4000 pixels.

  2. what text plugin generators do you use? And there was no image below.

  3 & 4... I see that you are running OS 10.9.5. The latest OS fully supported for the FCP 7 was 10.6.8. Each version of the OS after that goes further away from support total and complete operability. That being said, I still use FCP 7 on my machine running 10.9.5, but I lost functionality... Motion and Compressor and Qmaster no longer work.   So well here that is the problem with sending to... compressor Compressor 3.5 provided with FCP does not work on 10.9.5.  You will need to get the latest version... but then FCP cannot SEND to compressor with this version, you need to export a file and then compress him.

  5. who can also be linked to the media format used in the project and more than 4000 pixels of still images.

• My compaq presario has crashed and I lost everything, don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision

  don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision

  Hello

  Thanks for posting the question in the Microsoft Community!

  You can't use the computer and reinstall the operating system.

  To help you better, we need more information.

  1. What do you mean by computer crashed? Do you get any error messages?

  2. is the computer, a laptop or desktop?

  If you use a laptop, you can contact the computer manufacturer to get an installation disc.

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• I need help wipe out my computer and reinstall everything as if I bought it just...

  How would all destroy my computer everything and reinstall everything on it. I custom built my computer and I have all my CD that came with everything about I don't know how to do it... Ive got the version of windows vista Home premium edition 32-bit windows. If someone could help me to do this, it would be greatly appreciated... Thank you david...

  When I put my disk in vista it will read her, and when I click to go to my bios it wont be silent... What can I do?

  If under warranty, contact your computer manufacturer.

  If this is not the case, contact a local and trusted computer repairman.

  It would seem that you have hardware problems.

  See you soon.

  Mick Murphy - Microsoft partner

• 2 questions here please: during the unlocking process: it says that I need to erase everything on my iphone. So, what of my contacts? How can I get that back?

  2 the questions here please:

  During the unlocking process: it says that I need to erase everything on my iPhone 5 s. So, what of my contacts? How can I get that back? because the backup to icloud it nor iTunes.

  In addition, what happens if I do not erase the content? That will prevent my form of phone is unlocked?

  Thank you very much

  RAJS

  Do not erase everything on your phone under the procedure of release.  If you have your phone set to backup Contacts on iCloud, they will be saved and then can be later reloaded on your phone after erasing it.  I just got two iPhone 5 and it worked well.  Also to do a full backup to your computer via iTunes and transfer everything what is not already saved if you are asked.  The only problem I encountered was that some applications does not and I had to manually reinstall the.

• Service Pack 3, over current, or reformat and reinstall everything?

  I usually reformat / reinstall everything on my bench office every 2 years. I did this last box. I see now that there only on XP Pro Service Pack 2. I have the SP 3 Micro drive. Is it better to install SP3 on top of current news, or do a reformat and clean install of everything? I have a lot of graphics Adobe software, no games, 2 scanners etc. Nothing too major. All the boxes get cluttered junk over two years, as we all know. Thanks for any advice.   Rotab

  Saturday, January 15, 2011, 16:41:07 + 0000, Daavee wrote:

  It is not that it is bad to do. It's just very tedious and unnecessary.

  Yes, true for most, but it can also be bad. See below.

  In addition, a number of people have performed a clean installation
  without the first backup of their data (so in this case, it is bad).

  Yes, and also note that you have to install all the necessary
  drivers for your system, you must recustomize Windows and all your
  Apps to work the way you are comfortable with.

  In addition to all these things being long and painful, you can
  have trouble with some of them: you will find all your CDs application?
  You will find all the necessary installation codes? Do you have any data
  backups to restore? Do you remember yet all customizations and
  tweaks can be installed to make everything work the way that you
  as?
  If you can't find something you need, or do not remember something from you
  made, it can be very bad.

  Ken Blake (MS-MVP)

• How to clean a little dirty without having to reinstall everything?

  Dirty bit original title: Windows Vista

  I'm working on Windows Vista Home Premium 32 bit

  I ran a check of the system and the results were a little Tanya.

  It is in my storage driver is there an easier way

  dispel this other that wipe my system and reinstalling everything?

  I already tried a Run/chk.

  Hello

  I suggest that you follow these steps and check to see if they help.

  Step 1:

  I suggest you run run check disk in Windows re, you need Windows Vista DVD, start the computer to Win from the elevated command prompt and try to do a CHKDSK. You can follow these steps to run CHKDSK:
   
  (a) use the Windows Vista DVD to start the computer from Windows Recovery (WinRE).
  (b) in WinRE, open a command prompt. To do this, follow these steps:
  On the screen to install Windows, select the appropriate language to install, time and
  currency format and keyboard or input method options and then click Next.
  (c) click on repair your computer.
  (d) click on the Windows Vista installation you want to repair, and then click Next.
  (e) click on command prompt.
  At the command prompt, type the following command and press ENTER:
  CHKDSK : / / f r
   
  WARNING:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Step 2:

  Also perform disk cleanup to remove unwanted files and try to perform the chekdsk again.

• I need to reinstall my printer wifi every day

  I am under W7 and using an Epson Stylus SX435W wifi. Every day I need to print, the computer does not recognize the printer is running: "online".
  I tried:
  Switching off and on again

  Plug the USB cord
  Troubleshooting
  The only thing that works is reinstall every time. Now I have multiple copies of the printer in my menu "devices and printers". Whenever I have "Remove device" all will reappear the next time I start up.
  Any ideas anyone?
  I wish I had just a copy of my printer and run immediately, every time. Thanks in advance...

  Hi and thanks for your help.

  I reinstalled again a few days ago, and - believe it or not - do not need to reinstall it from. I used a different, although driver after that my printer was bought in dated date. Must have had the correction in it.
  Everything seems to happen smoothly at the mo. I'll report if I have additional problems.
  Thanks again.

• Lost all files in Windows, do I need to reinstall Windows?

  I have performed in a bad way, as backup of the laptop and I lost all files in windows. Any program of Microsoft works. just internet. Is there a way to recover these files or do I have to re - install windows 7? Thank you.

  If you made a backup restore from restoring built in the recovery partition on the laptop, all would be lost, and you need to reinstall all of the programs that you installed after you started using the laptop.

  Images and documents you had on this subject, would be too lost!

  If you used the built in restore which is under Windows, everything must be always there with the exception of all the files that were created after that restore point.

• restarted to how I bought at the store (windows 8), do I need to reinstall windows 8.1?

  I bought this computer a year ago, not just a gateway with windows 8. I rebooted the computer to the way it was purchased in the store. now he says that it cannot install the updates, it tries but said then failed, defeating the update. so since its done and I rebooted it, do I need to reinstall windows 8.1? Why would he do that? any help is appreciated, thanks

  Hello NikkiMorris,

  That your PC is almost a year old and you say it came with Windows pre-installed, 8 so, with you restoring back to factory conditions, you must reinstall the Windows 8.1 update.

  While Windows 8, without the 8.1 update, updates some files, it will not full updates. To do that you need to completely upgrade Windows 8.1 I believe that Microsoft made sure that Windows 8 would update not fully to make sure that everything the world updated to 8.1 of Windows Update. Without the 8.1 update you can not access the full set of Windows Update to date.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I have been hacked and you will have to reset my PC to factory setting and reinstall everything.  To get my Adobe Lightroom rear 6 where she was re - download the software and then Exchange with my current backup catalog catalog.  Will this work?  I have

  I have been hacked and you will have to reset my PC to factory setting and reinstall everything.  To get my Adobe Lightroom rear 6 where she was re - download the software and then Exchange with my current backup catalog catalog.  Will this work?  -What I else I need / have to do?

  Yep, it shud work.

  https://helpx.Adobe.com/Lightroom/help/import-photos-various-sources.html

  Restore a backup catalog

  • Choose file > open catalog.

  • Navigate to the location of your backup catalog file.

  • Select the backup the .lrcat file and click Open.

  • (Optional) Copy the catalog to the location of the original catalogue to replace.

• I need to reinstall LR 6. So far, I downloaded and successfully installed LR 5. When I DL LR 6 I don't get a file windows executable? How to install the update to LR 5 to 6?

  I have to reinstall everything on my computer again. I have instslled LR 5, but need to install LR 6. The LR 6 file I have DL is not a file windows executable. How can I install. I have my serial number.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• need to reinstall Adobe Acrobat Pro

  Ugh... I spilled wine on my computer and need to reinstall Adobe Acrobat Pro on loan computer.  I have my activation code... How do I do this (if I can not disable old since the computer is fried)?

  Hi Gary,.

  You can download Acrobat by using the following link: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  Kind regards
  Rahul

• My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and

  My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and Mac Os 10.10.5 help please. Please respond by email to [email protected]

  I got this error 16 experience on my Macbook. The permissions for the Application Support folder have been changed.

  A simple fix Terminal can take care of that.

  Open Terminal (you can just tap Terminal in Spotlight to find it).

  Copy and paste this command in Terminal: sudo chmod-r 777 library/Application\ Support / Adobe

  Press enter, give your password if requested, and then try again. You may need to restart your Mac.

  Gene

• Hi friends, after upgrading to Windows 10 in my PC, my CC of Photoshop does not work. It is also not far. I want to uninstall Adobe CC and reinstall everything from scratch after you delete all the files. Please guide me. Thank you...

  Hi friends, after upgrading to Windows 10 in my PC, my CC of Photoshop does not work. It is also not far. I want to uninstall Adobe CC and reinstall everything from scratch after you delete all the files. Please guide me. Thank you...

  You can uninstall creative cloud, CC of Photoshop and other Adobe programs you want to remove "Programs and features" in the Panel

  Execution of other http://download.macromedia.com/SupportTools/Cleaner/win/AdobeCreativeCloudCleanerTool.exe

  Then reinstall Creative cloud link below

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Register and download the programs you need