need vertically align the text in the footer at the bottom

Similar Questions

• File IDML opening with vertical alignment of text in the box set "Center".

  I got a batch of files, asking me to review. They were saved as files CC as well as .idml. I have used .idml since the sender used plugins files that are not included in the package. Using the .idml, I do not get the warning about the missing plugins. However, when I open the idml files that all text boxes are the vertical value Center instead of top. Very tedious. CC files opened correctly (with the exception of the warning about the missing plugins).

  Is it possible to open the idmls and get the vertical alignment to open as "top"? Or should I use the CC files and ignore the warning on the plugins?

  Thank you!

  Tim

  Guess I'm stuck with opening the idml docs and manually change each vertical alignment of text box.

  With Find\Change you can:

  Find/replace > object tab

  Tye: Blocks of text

  Change object Format: click on specify the attributes to modify > text frame general Options > vertical Justification > Align > Top

  Then find and change or change all

• Need help aligning the SSD to install Windows XP Pro (32 bit)

  OK, I scoured the internet for help on this one - I'm a newbie to SSD - so having to manually align the partitions and find FITTINGS utilities to take care of the "Crusher" is all new to me - so the answers I found on the net were to "over my head" for my last neuron remaining cope!

  The machine is an Asus Eee PC 901/XP - that belongs to a friend of mine. These netbooks have 1 x 4 GB SSD and 1 x 8 GB SSD - I installed XP Pro SP3 on the 8 GB and got to boot from it - only problem is not only slow, but essentially unusable in this same open my computer with no other progs running takes a good 30-45 seconds - and actually run the progs just cripple it.

  After checking the CPU in Tsk Mgr was sod all, that there is plenty of available RAM (I upgraded to 2 GB = max mobo aura), I can only imagine that - now that I've done some reading on these SSDS - the (main?) cause of the non-existent performance is the fact that I have (in my ignorance) doesn't have to align the partitions before installing the operating system.

  I got a 8 GB disk image - using a prog called 'Snapshot' - as I read it, I should be able to then use this image to replace the disk of 8 once I have the aligned partition (this image is now on the 4 GB drive), without messing up alignment - so no doubt I need to align the 4 GB drive as well.

  So, after all that waffle that I would be really happy is a walk of models by using Diskpar (if someone can point me to a working bind it to d/l 1!) -or Diskpart, which I think I can run from my recovery disc of Win7 (from my Dell laptop) - I know that I've seen people talk about running it from a Vista recovery disk, so guess it of the same tool and can help me to do the same job.

  I think I need to remove the volume (?) on the 8 GB, before I can do any alignment - then, as it is currently the only player with a job o/s on this subject, is it possible by booting from the recovery disc too?

  Just for the record the Tech Support Asus was desperate - also, their support for the "Eee" family forum have been down for weeks - then were not able to ask people who have probably all done on this machine!

  Thank you

  Jon

  Hello

  Unfortunately, this is not supported in computer ASUS; You should continue to contact ASUS for support.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

• vertical alignment of text in the text box

  Is this possible?

  bingandham,

  Not really, but you can try the opposite, unless you find silly.

  You can create a colorful eventually (possibly rounded) rectangle and use the path tool to have the text inside, with some steps.

  Or you can create text and create a (possibly rounded) rectangle behind him, or have a predetermined size by adjusting the type (text).

  My guess is that the latter can meet your needs. If so, you can:

  (1) with the normal Type tool create the text as a direct Type; You can choose to focus or option justify options in the window > palette paragraph (delivered with the palette of characters when you set the font and size);

  (2) in the window > appearance Panel flyout, click Add a new fill, then drag characters that fill down below in the main appearance palette and click on it to have selected it. It is highlighted;

  (3) set the desired color, you can use the window > palette of colors or anything else;

  (4) effect > convert to shape > Rectangle (or a rounded Rectangle), then either:

  4 (a) absolute-click and set the size of the predetermined label, or:

  4 (b) click Relative and set the width and height to be added to the direct Type. Try different values in the preview to see how it works.

  This will give you the text as a direct Type, so you can modify it (you can add text, lines still more), and it will stay centered on the bottom. If you choose 4 a), you must keep the text inside, adjusting the font size, as appropriate; If you choose 4 b), the label/background fits the text.

  If you want just an invisible rectangle behind the text, 3) you can adjust the opacity to 0 (in the transparency palette), and if you need the box for positioning or something, you can either

  (A) select and object > decompose the appearance to get a group with direct Type and the box as a rectangle, or

  (B) false box, just edit > Preferences > General > use limits preview; After that, you can reset to normal.

• Need to align the two radio buttons in one line

  Hi all

  In my BlackBerry Application, I have a part of the user interface where I need to align two radio buttons in one line.

  I used the code to design the user interface, but the two radio buttons below are overlapping.

  SerializableAttribute public class BBSettingsScreen extends form {}

  Rbg RadioButtonGroup = new RadioButtonGroup();

  RadioButtonLayout raButtonLayout = new RadioButtonLayout();

  raButtonLayout.add (new RadioButtonField ("ONE", rbg, true, RadioButtonField.FIELD_RIGHT));
  raButtonLayout.add (new RadioButtonField ("TWO", rbg, false, RadioButtonField.FIELD_LEFT));

  Add (raButtonLayout);

  SerializableAttribute public class RadioButtonLayout extends Manager {}

  public RadioButtonLayout() {}
  Super(Manager.VERTICAL_SCROLL |) Manager.RIGHTMOST);
  }

  protected void sublayout (int width, int height) {}
  Field field;
  get the total number of areas falling under this Manager of
  int numberOfFields = getFieldCount();
  int x = 0;
  int y = 0;
  for (int i = 0; i)< numberoffields;i++)="">
  field = getField (i); get the field
  setPositionChild(field,x,y); set the position of the field

  layoutChild (field, width, height); Spread the field
  x += 30;
  }

  width = 70;
  height = 20;

  setExtent (width, height);
  }

  }

  }

  Please help on this...

  Thank you & best regards

  Chintada Ravikumar

  Try this:

  RadioButtonGroup rgb=new RadioButtonGroup();
  HorizontalFieldManager hr1=new HorizontalFieldManager(FIELD_HCENTER);
  RadioButtonField radioOne=new RadioButtonField(" RadioOne",rgb,true)
  {
      protected void layout(int width, int height)
      {
          super.layout(75,30);//Width and height according to the button name;
          setExtent(75,30);//width and height according to the button name;
      }
  };
  hr1.add(radioOne);
  RadioButtonField radioTwo=new RadioButtonField(" RadioTwo",rgb,false)
  {
      protected void layout(int width, int height)
      {
          super.layout(75,30);//Width and height according to the button name;
          setExtent(75,30);//Width and height according to the button name;
      }
  };
  radioTwo.setPadding(0, 0, 0, 20);
  hr1.add(other);
  add(hr1);
  

• Vertical alignment of text

  Live Cycle Designer ES 8.2.1.nnnnnnnnnnnnnnn (Acrobat 9) on a PC Win7

  How do you change the vertical alignment of the text in a text field. By default seems to be centered.

  Have a large field of observations.  Allow multiple lines works well, but to be Top vertical alignment.

  Have seen some discussion and at least one of the possible solutions, but can't make it work as I can't find the same items in the described pallets.

  Thank you

  Bill

  Turn on the paragraph palette by selecting it in the Windows menu. Then click on the object that you want to manipulate and on this palette paragraph are alignment icons that allow you to set the text to start at th etop of the field instead of in the middle.

  Hope that helps

  Paul

• Cannot align the bottom edge of the photo with the top of the taskbar on the H - P dv7-4296 running Windows 7

  I have a dv7-4296nr running Windows 7.  I use a slide show for my wallpaper.  But some of the graphics that I use are not among the standard background images and are not size 1600 x 900 pixels.  I resized them so that the vertical dimension is 900 pixels and the horizontal is not more than 1600 pixels.

  I want to put a text caption simple (usually only one word) in the lower right corner of the image, as close as possible to the lower edge.  Put the text in the image is easy, but he displayed is not!

  The problem is that the taskbar hide the bottom of the image, including the legend.  I can think of two approaches to solve the problem, but have not been able to get either to work.

  The preferred approach is to resize and place the photos so that the bottom of the image is almost exactly in line with the top of the to-do bar and the top of the image is at the top of the screen.  That would allow me to display the entire image with the caption placed where I like it.  I was not able to resize the images and place them in the display to achieve this.  Can you tell me how to proceed?

  The other answer, which is less satisfactory, is to move the legend to the top, so the base line is just above the top of the taskbar.  How far away from the lower edge of the baseline of the text image will have to be to do this?

  Thanks for your help!

  The taskbar are 40 pixels high, so you can see only 860 900 pixels display area.  The simplest solution is to put the pixel text-based line at least 40 of the bottom of the image and use the option Center in the positioning of the image menu.  Unfortunately, this leaves the background pixels 40 obscured by the taskbar.

  A more elegant solution is to resize the image in order to make the vertical dimension 860 pixels.  I use Corel Paint Shop Pro, which has a function called 'Size of the canvas', and I don't know there are similar functions in other paint programs.  Canvas size allows you to add a background (a "Web") and specify the size of the canvas as well as the location of the image on the canvas.

  I make the white of the canvas, 900 pixels high and the same width as the image.  It gives me a bunch of white 'canvas' 40 pixels up and down.  I add the text, and then store the resulting image in the folder that contains the images on my desk of slides.

  It works very well: the taskbar don't obscure than the white stripe, while I can see the entire image with the text placed where I want.

• How can I get my index generated to properly align the bottom margin?

  I did the index before and had no problems.  This time, it will not go to the bottom margin or will go underneath.  The page numbers for the last topic in the back (with 2 or 3 empty lines above the bottom margin) appear at the top of the next column.

  I still don't know what was wrong.  I played a little of the paragraph palette and the index works properly!   Thank you very much for your help!

• How to set the vertical alignment of text in a table style

  I hope I'm missing something easy. I know how vertically and horizontally align text in a table cell.

  What I would do, is to be able to do as well in a style - section, object or character, it doesn't matter - so I don't have to do it manually to each cell in a table. I can't figure out how to put this in a style. Is it possible to do this?

  Thank you

  Marcy

  You create a cell Style. In a cell Style, you can set the vertical Justification on the text panel.

• How vertical align a text from his block of text?

  I managed to create a TextFrame with text inside content.

  var textFrame = page.textFrames.add();
  textFrame.geometricBounds = [10, 10, 100, 60];
  textFrame.contents = "23";
  textFrame.fillColor = bgColor21;
  var text = lineNameTextFrame.texts.item(0);
  text.appliedFont = app.fonts.item("Ubuntu");
  text.fontStyle = "Bold";
  text.pointSize = 60;
  text.fillColor = white;
  text.justification = Justification.centerAlign;
  text.alignToBaseline = false;
  
  

  Text is centered horizontally using Jusitification.centerAlign, but I can't find in the documentation or debug property to Center vertically.

  However, in the InDesign UI, there is a feature:

  

  Does anyone know what size of text I need to put?

  Thank you

  Try this,

  var textFrame = page.textFrames.add();
  textFrame.geometricBounds = [10, 10, 100, 60];
  textFrame.contents = "23";
  textFrame.textFramePreferences.verticalJustification = VerticalJustification.CENTER_ALIGN; 
  

  Visit this link as well:

  http://jongware.mit.edu/idcs6js/pc_TextFramePreference.html

• Text of label vertical alignment control

  Hi How can we vertical align the text of the label at the top... as there is no ownership for this

  Here is my code: -.

  < mx:Box textAlign = "left" id = "bxMain" height = "13" backgroundColor = "#f3f1ee" x = "80" y = "5" >
  < mx:Label color = 'black' id = 'lblDrawerName"fontWeight ="bold"textAlign ="left"fontSize ="11"width ="150"text ='{data. DrawerName} "x ="0"/ >
  < / mx:Box >

  the label is a box.the problem I m is the text of the label is cutting down... So I want to align on top.what I have to do is to do it within the height of the specified area is 13...

  other thing I can do is decrease the size of the font to 10, but if I do the helvetica font I said overall the app... not "BOLD" as 10 and less than 10 rest the fontweight property stops working

  What to do in this case...

  Thank you

  Hello

  Use the canvas instead of the box and put a negative value for the y of the Label

• Align the dynamic MC with the alignment of High Point

  Hello guys, I have a doubt, if a step having a height of 600px and I would like to focus a movieClip with dynamic size and the registration point is always at the top, to the this 600px 400px how it is possible, without having to create another movieClip.

  To Center vertically align the movieclip, first of all, you must wait for dynamic movieclip is complete, then you can place the movieclip based on...

  MovieClip._y = (600 - movieclip._height) / 2

• Alignment of Group at the centre and at the bottom of the artboard?

  How can I align a group of shapes in the Center and at the bottom of the artboard? I select forms, group them and choose horizontal centering and vertical align the base, although nothing is happening.

  You must check "Align to the work plan" first of all, it is located in the lower right of the palette of transformation. If you don't see it, click on the fly on the menu and choose "options".

• Need help with the form

  Hola

  Yes, even once, I need help.

  Please help me figure out why this form does not work.

  http://mydsigner.com/Claudia/pages/catering.html

  "If you see where the ' Capcha ' is?  In this box, there are ONLY 3 LETTERS/NUMBERS and 6 show.

  I can't find anywhere the process.php

  Going nuts :-(

  The original page is here:http://www.lascasuelasmexicanrestaurant.com/catering/

  It's 'Always' part of the site is mainly about php (?)

  Link here: https://forums.adobe.com/thread/1772037?sr=inbox

  Well, the site is almost done, just this little problem.

  A big thank you to all

  Salads from California

  You don't need this at the bottom of the page:

  You have a more recent call (1.11.1) at the library of the jQuery framework:

  2 scripts are contradictory, stop the datepicker work, so delete the old. The validation of the form should still work using the script more up-to-date.

• When in the controls to display full-screen video at the bottom of the screen

  Hi all

  We all must have seen players, that orders are set to perfectly align the bottom of the screen mode full screen, and the proportions of the controls are perfect (without distortion)-a know what code Achieves this?

  It must be something to do with, power auto detect what size screen the user has, perhaps.

  Any help appreciated

  Kind regards

  Boxing boom

  didn't I just did a project for you with a video player that went full-screen?