Need WRT300N wired configurations to connect to another router

Similar Questions

• Connects to the router, but cannot send or receive data

  I have a WRT54G.  I can find the network and connect to the router, but I can't send or receive data.  I tried to connect directly to the router and I still not able to send or receive data. Both computers on the router has the same problem.  I did a reset the router back to the settings by default and still no luck.  Any thoughts?  Thanks in advance for the help.

  The first thing you can try is when you the Modem and the router is connected to the other, disconnect the power from the router and Modem, wait 30 seconds and then plug in the power to the Modem and once all the lights are solid, then connect the power supply to the Linksys router, now check if you are able to go online. If still no then...

  Who is your ISP. So I think you need to re - configure all settings of your router again.

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• WIFI connects to the router but no internet connection on 15R 3521

  Hi, the new laptop 3521 with Win7 Pro the WLAN will connect to the selected wireless router but is unable to establish an internet connection.

  WLan Driver 1703 was duly installed once the Chipset driver was installed, as recommended.

  Fortunately, other mobile devices to connect to the same router. Ubuntu on this laptop was also happy to connect to internet on WIFI, only Win7 fails.

  Disabled the Win7 firewall, but no change. This connection, unidentified in the network and sharing Center.   Router SSID etc have been entered correctly. Remove the WLAN profile and not reinstated, no change.

  Tried to connect to another router wireless with the same result. I can only run this laptop on wired connection to the router.

  I am at a loss as to what other steps I could take to correct this key WLan / internet access.

  Any suggestions would be welcome. See you soon.

  Hi love,

  Thanks for your advice. I deleted the profiles (two identical found!), also removed all entries of all WiFi routers in Win 7 registry. This step has not resolved the problem.

  However, I found the reason for the connection problem and the solution is the following:

  In the wireless connected (TP-Link) router, wireless--> channel settings is set to 'AUTO' (which is to select automatically 20 MHz or 40 MHz).

  In the device driver Dell WLAN 1703 (properties--> advanced--> bandwidth 802.11 n, the value has been set on (ie the Atheros is the default!))  "20 MHz.

  Once I put the option value "20 MHz / 40 MHz Auto", the connection comes to life.

  What a relief!

  The question is now completely resolved. Thank you to all who have contributed.

  Better with respect to Dzsino.

• Connect to Airport Extreme to another router

  Hello.  I searched this forum to see if my question is already answered.  I couldn't find all the signs that answer.  If it has already been answered, please point me to the subject.  Otherwise, here's my question:

  I need to expand Internet coverage in my house.  This is the configuration I want to implement:

  • Cable modem (at one end of my house) connected to a WiFi router non - Apple.

  • Use an Ethernet cable to the router through my attic, at one Airport Extreme to the other end of the House

  • I would like to run an Ethernet cable from the Airport Extreme to my TV and another cable to an AppleTV

  This would give wireless coverage to the entire House and Internet wired for television and the AppleTV.

  I would like some advice on how best to implement.  Here are a few questions (although I don't know if I ask to everything that I need to ask):

  • If the Airport Extreme be configured with DHCP or a static IP address?

  • If the Airport Extreme and the other router have the same SSID and password?  Or it doesn't matter?

  • What should I do a configuration to make the Ethernet connection work seamlessly in Airport Extreme to the other router on the cable modem?

  • I guess I can configure the other router (connected to the cable modem) to DHCP.  Is this correct?

  Thanks in advance for any advice.  If all goes well, I plan to spend this Saturday morning crawling into the attic and tonight Saturday benefiting the whole Internet.

  Should the Airport Extreme be configured with DHCP or a static IP address?

  DHCP, unless you have a preference for a static IP address.

  Airport Extreme and the other router has the same SSID and password?

  Yes, if you want both of your routers to behave as if they provided a unique network of "big". No, if you want to require users to log on the wireless provided separately by each router.

  I have to do any configuration to make the Ethernet connection work seamlessly in Airport Extreme to the other router on the cable modem?

  Just run configuration 'Wizard' of Apple, and it will assign the correct parameters to the AirPort Extreme.

  I guess I can configure the other router (connected to the cable modem) to DHCP.  Is this correct?

  It is not clear, given that we do not know what another router you may have. Do you mean that the other router connected to the modem via DHCP... or... you hear the other router provide DHCP and NAT services for the entire network?

• E2700 cannot connect directly to the modem, but connects via another wifi router?

  I have a Netgear WNDR3700v2 that I was very pleased until I had a nest of thermostat. Apparently it's a router not supported and I had to change it. I bought an E2700 since he took charge, but I have a huge dilemma...

  If I connect the linksys directly to the modem, I don't get an internet connection. I got out and renewed IPs without success...

  But if I wired the linksys for the netgear, I get a good solid internet connection. problem is, I have no need for installation of 2 routers on top of each other...

  any suggestions? I would like to know what kind of information you need.

  Basically, I do not understand why he is not able to connect directly to the modem to linksys. Yet, it becomes solid connection wired through another router.

  I use Comcast and South FL. it is motorola surfboard modem

  OK, found the solution.

  call 1800COMCAST

  go to the problems of the internet, there is an option to send a refresh signal to your modem.

  I did, and it started working. I guess that clears the memory and binds to the new MAC address...

  After that I did, internet is back. I hope this will be useful to someone. I was ready to return the dang thing.

• Debugging a "Wired/Wireless Printer connection.

  Suddenly, I have a problem with my printer Epson WF4650 age of 1 month. My setup at home is fairly simple

  (1) printer is wired (Ethernet) to a classic Netgear router

  (2) I have two laptops (the two Dell laptps) that print (a Vista and a Win7) wireless to my router (and it allows access to the printer)

  (3) things worked pretty well, although I often had a message for the dialog box 'Printers and devices' under the State which is "error - printing". He would go from time to time, I would cancel the job and re - print and it would work. I would say that this was maybe 1-5 jobs on.

  Earlier today, I printed a work without a problem, so I tried to print another short document. I get the message "error - printing". And now everything that I try to print creates this final result.  Things that which do not help.

  (1) restart my PC

  (2) print another document (a Wordpad doc with a single line)

  (3) print from another computer.

  (4) restart EVERYTHING (laptop, printer, router)-I also did a "hard restart" on the printer (unplugged) "

  5) re - defining the ethernet between my router and printer connectors

  (6) my PRINTERS folder is empty (thingey of print spooler)

  (7) the printer seems fine for purposes of printing information about the State of the control panel

  (8) I find the Guide of the curious user, especially in the context of things networking. I don't see even my configuration in the list, but I can't imagine it not supported (and it worked for a month). But I don't know enough to be able to understand what he said.

  I have zero problems with internet traffic, BTW. Modem connection cable.

  I did an IPCONFIG / renew, but this was not helpful.

  My network is on zero. I can't even say the output of the IPCONFIG/All command, whether or not my printer is known to be connected to my router.

  I don't know where I should look then (printer, router, computer laptop, combination, etc.). Suggestions?

  Thank you. ;

  Dave

  I continued to dig into the manual, found a term that I had misunderstood (causing me to jump to the relevant section of the manual) and found a step that had to be done. And it is to disable WI - FI (I am connected to my router).

  Of course I was not connected via WI - FI (stumbled upon some sort of problem with my firewall, so I just plugged the thing). And I have no idea why I went from "occasional failures" to "cannot print a single thing, darn" by doing nothing more than find and open a jpg file to print.

  But I'm going to mark this one resolved, as I don't seem to be able to print again.

  Dave

  Dave

• change essbase connection to another instance of SSP on a different server

  Hello world

  I'm working on 11.1.2.2 EPM platform and I need to change the connection essbase to Shared Services. I want to connect to another instance on another server. So, I think to start the Configurator on the new server to connect the essbase to the new instance. However, what about the existing configuration? I have to cancel the configuration it? Is there a procedure that I could follow?

  I hope that I was clear... Thank you in advance for each considerations that you might have about my problem.

  Kind regards

  Maurizio

  Uninstall Essbase and must remove it shared services registry.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Client Oracle connection with another UNIX user

  Hi all
  
  
  I installed the oracle client in one of the user named 'oracle' and it is configured to connect to the database that is on the other server.
  And now, I want to connect to the database that is on the other server with another user who, on the Client, Server installed.
  Please let us know how to proceed.
  
  Thank you and best regards,
  Sagar Maram

  I think you need to read on unix Group privileges. Basically your second user will have to either his own client, or execute privileges on the existing client installation (by group or world execute privileges). You will also need to set PATH, LD_LIBRARY_PATH, ORACLE_HOME environment variables, TWO_TASK etc.

• How to use wifi when connected to another computer?

  I am currently in a situation where I need screen sharing another mac via ethernet with my thunderbolt, while the Wifi adapter. I have a 2014 the computer I want to see is a new Mac Mini and Macbook Pro screen. When we are connected by ethernet, none of my wifi signal works, even if I am logged in. My computer is looking for internet connection coming from the mac mini, but that is not connected to the internet. As soon as I unplug my shot of lightning/Ethernet, then my wifi starts immediately to the top. In any case to be connected to my wifi, as well as the other computer by ethernet at the same time? Thank you

  Steve

  Your description is disconcerting.

  Do not run cables on the carpet between the computers. Connect all devices to your router or switches that connect to your router, or via Wi - Fi to your router.

  You have a SINGLE network. Some devices can be connected by Ethernet and others by Wi - Fi, but it's the same network.  There is no need to have all devices to use the same media. Ethernet is the fastest connection you can do, so if you have an Ethernet connection, Wi - Fi can be "".

  As long as each device can get on the Internet at the same time without rewiring, you can also do a computer connection to computer whenever you want.

• Wired device (PC) connected as a wireless device

  Dear All - my lists of connected router my PC connected to the modem as a wireless device. How to configure my router D1500 to the list as a wired device. I plugged a cable ISP.

  Thanks for help.

  Tapas

  Thanks for your reply. I've tried it. There are 3 rear - 2 yellow (LAN1, LAN2/WAN) ports and an ADSL grey. The cable can only be mounted one or the other of the two yellow ports. It worked not on port LAN1 but working in the other port.

  However, I do not know how, now, the problem seems solved. The basic home screen display properly wired device (PC) and wireless (my laptop) it connected the modem router.

  With best wishes,

  Tapas

• Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  On Friday, June 8, 2012 14:45:42 + 0000, Ian 213 wrote:

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Your router provides firewall protection, so the need is not the same
  as if you had no a router. There are some who say you need to no.
  all firewall software.

  But my opinion is that you would be a lot safer if you have run a
  router software, and since there is little reason not to, I
  recommend that you do.

  Ken Blake, Microsoft MVP

  I agree.

  @OP Windows XP (SP2 and above), Vista, 7 and 8 all have active firewall software by default.

  There is no need of any 3rd party firewall.

  Some users like running programs such as ZoneAlarm because it warns him from the processes that use the network, and then there is the possibility to deny/allow it on the spot, or deny/allow forever. There may be slight discomfort in the installation, but once it's for all your programs, and then it really can work in silent mode.

  Microsoft Firewall simply leave everything default, but they can be configured manually to block anything outgoing or incoming.

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  Hello

  1 have you made changes to your computer recently?

  2 are you able to access the Internet through an Ethernet cable?

  I suggest you to follow the steps in the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• Connect to another computer via VPN

  How to connect to another modem with VPN network. The other computer is connected directly to the modem.

  Hello

  Maybe this can help.

  http://www.windowsecurity.com/articles/configure-VPN-connection-Windows-XP.html

  http://support.Microsoft.com/kb/314076

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• get internet connection through another computer...

  Hello

  I would go straight to the point :)

  I have a desktop running windows vista. I have a normal internet connection through a router that connects to the internet on this desktop computer.

  now, I also have a laptop with windows xp and here is what I do. my laptop's wireless was always bothers me, sometimes it connects, sometimes it doesn't work out... so I saw that there is an Ethernet card installed in the laptop with an Ethernet port.

  My question is this:

  I have a lot of Ethernet cables at home and I was wondering if there is a way to get internet to my laptop via the Ethernet port on my desktop, but without needing the desktop computer to be running, cause I only use my laptop these days and my router is too far to connect from my room. I hope you understand my problem. In theory, I think it's possible to do, but I'm not sure how, so please help me on this one. my laptop also has firewire, but I prefer ethernet for some reason any.

  Thank you

  Hello

  Sorry, but you cannot get a connection via another computer if the computer is off.

  I'm not sure that I understand completely the topology.  However, if the office is connected by cable to a router for Internet connection, you can solve the problem by buying a simple network switch.

  You take the cable from the desktop and connect to the switch. Then you plug the desktop and laptop computer at the switch.

  That this switch network does, it divides a cable to feed many computers.

  Example of a switch that can be connected with a cable to a router and feed 5 computers.

  http://www.Newegg.com/product/product.aspx?item=N82E16833166034-

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET