Negative into a positive image

Similar Questions

• Directly convert a negative into a positive on LR5

  Hello, there is a way (means) to convert a negative into a positive on LR 5. I did a shoot of a Kodak TX-400 film, and I won't be able to work on the inverted image (positive, therefore). Thank you

  This works. Make sure that you are at the Point the curve mode. Drag the ends of the line:

  

  Note that some of the cursors now works in the opposite direction.

  HAL

• ICH möchte negative in Positiv umwandeln (invertieren) - I need to get a negative to a positive image - in the first version is was possible, but the current version doesn't

  WER die Lösung Hat?   Who has an intension?

  Click on the small icon in the lower right corner of the tone curve Panel, and you can change the curve.

  

• How can I convert a negative image of the film a positive image in Lightroom 6?

  I've seen a number of online tutorials that explains how you can reverse/return line in the Module development of tone curve by dragging either end of the line, top / bottom for converting a negative to a positive image. This however does not seem possible in LR 6?  So, how are you? (My scanner is able to produce positives TIFF or JPEG of the film I've been scanning, but I would have preferred to edit pictures using Raw DNG files that it produces, which are negative).

  You must click on the small icon in the lower right curved panel to make editing possible.

  If it comes to color film, I don't know how good a conversion that would be, it will certainly color adjustments, because of the orange mask in the negative.

  And a scanner DNG files? I doubt that they will be real raw files...

  You can scan an image tiff with all the cliches and to highlight the present details, and that will be as good as any raw file.

• transform old negatives into positives

  I have a lot of old negatives, 2B, 120 etc. Thanks to a digital system at the present time now these negatives can be not enlarge or

  make (positive) prints.  In my view, there are ways to convert them into a positive. Can someone help me?

  Kakunu

  I have a lot of old negatives, 2B, 120 etc. Thanks to a digital system at the present time now these negatives can be not enlarge or

  make (positive) prints.  In my view, there are ways to convert them into a positive. Can someone help me?

  Kakunu

  Most (if not all) programs of photo editing to do.

• Is it possible to merge images of 4 different files into a single image of 4 x 4 with ps scripting?

  I have therefore four files that each contain 970 images.   The pictures in the folder 1 are exactly the same as the images in the folder 2, 3 and 4.   All images are also in size 400px.   What I'm trying to do is to take images of the same name of each of the 4 files and put them into a single image of 800 x 800, then they are arranged in a 4 x 4 mode.

  Example: Each folder has an image named mastiff1.psd.  Images of four mastiff are different, but have the same name and have the same size.  I wish that all the images of four mastiff to be combined into a single image to double size who has all four images mastiff on it and save it as mastiff1 - 4 x 4.

  Is that something this photoshop script could do?  I'm a newb to this.  I used actions much, but never a script.

  For the script, you need to know a programming language JavaScript script that works on both platforms of Photoshop or AppleScript which will be only the Apple Mac machines, VSbasic or that will run only on windows.  You should also know how Photoshop and know how to use Photoshop well.

  There are some things that cannot be scripted to DOM Adobe doesn't have the methods of the interfaces for all of the functionality of Photoshop.  However, there is a plug-in with Adobe name Scriptlistener witch is as a recorder of script that you do in Photoshop that can be recorded in actions is recorded in two papers on the desktop you when the Scriptlistener plugin is installed is in the JavaScript syntax in VSbasic.   As Actions there is no logic just hard coded step, step, step...  The code uses the Operations Manager to do the function of Photoshop.  If the things that cannot be scripted using Adobe DOM can be scripted by using the action handler code produced by the Scriptlistener plug-in and hard-coded steps can be changes in javascript functions that use variables.

  According to me, what do you think would be a real ambitious first Photoshop script.  Adobe script documentation, the example script and Scriptlistener are not part of the standard installation. You need to download these from Adobe. Adobe Photoshop scripts. Adobe Developer Connection.

  I don't really know javascript, but I can hack it. Did some scripts in the document layout.  Most require a PSD template but PasteImageRoll does not work, but any Image must be in the same folder.  Most of my automated script require any image to be in the same folder.  However, two of my scripts are interactive.  You can select each image available from anywhere.  Images will be automatically resized and positioned to which you can then edit.

  I'm not the best eaten encoder, you can always look at the code I came with.

  Script to roll stick Image and picture package Support

  Image Collage Kit getting up-to-date made turn to Best Fit an option in PasteImageRoll.jsx change to customize your default settings.

  Scripts for Photoshop is powerful and I think that this package demonstrates this.

  The package includes four simple rules to follow to make Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.

  There are twelve scripts in this package, they provide the following functions:

  1. TestCollageTemplate.jsx - used to test a model of Collage of Photo while you're doing it with Photoshop.
  2. CollageTemplateBuilder.jsx - can build models that are compatible with this toolkit scripts.
  3. LayerToAlphaChan.jsx - used to convert a stack of the Prototype Image layers in a document template.
  4. InteractivePopulateCollage.jsx - used to fill interactively model Any Photo Collage. Offers more user control insert images and text.
  5. ReplaceCollageImage.jsx - allows to replace an object layer dynamic image collage populated with another image resized and positioned correctly.
  6. ChangeTextSize.jsx - this script can be used to change the size of text Image stamps when the size used by the filling did not work well.
  7. PopulateCollageTemplate.jsx - used to fill a Photo Collage template and leave the populated copy automatically opened in Photoshop.
  8. BatchOneImageCollage.jsx - used for the models automatically batch fill Collage that have only a single image inserted. The Collage or picture may be stamped with the text.
  9. BatchMultiImageCollage.jsx - used to model automatically batch fill any Photo Collage with images in an image source folder. Easier to use than the interactive script. Recorded collages can be twisted.
  10. BatchPicturePackage.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder
  11. PasteImageRoll.jsx - paste Images into a document to print on roll paper.
  12. PCTpreferences.jsx - edit this file to customize Collage fill preset scripts and add your own layer styles.

  Documentation and examples

• When I import my photos into lightroom, the images are completely black, so I can only see the image in the browser. How can I solve this?

  When I import my photos into lightroom, the images are completely black, so I can only see the image in the browser. How can I solve this?

  Go to Lightroom preferences

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  Kind regards

  ~ Mohit

• How to split a video into images and combine them into a single image?

  Little context:

  A game called Roblox let's make you your own games, publish, advertise and monetize them, etc. all this for free. It does not support videos, so I want to make my own using pictures. I have already tested with images individual, but which is laggy. So I thought, what happens if I make an image with a bunch of images in there and have this image to move on the screen it looks like different images.

  So here's what I want as a result (but with my own video and without white space between each image):

  

  How would I achieve that? Is Photoshop the right tool or other necessary software?

  Too bad!

  I use FreeVideoToJPGConverter (software) to convert my videos in jpg files.

  Then, I use Photojoiner.net to convert them into a single image.

• TIFF of Import Options - flatten the layers into a single Image

  Hi all

  Running a script to open the files and convert them into another type. When it comes to a TIFF file type, called 'TIFF Import Options' dialog box opens. This window has a column of Options containing two pieces of music radio to "Convert layers to objects" and "flatten into a single Image. How to open the file with the whole "flatten the layers into a single image?

  Thank you

  OpenOptionsPhotoshop.preserveLayers = true;

• Help the positioning image please

  Hi again,

  In the footer, I have three images. The largest image on the left is in the right place. The image of "Smartfisher" is correct, but I can't get the image of "Chafran-Sail" to go under the image "Smartfisher"?

  Any guidance is appreciated

  http://www.smartfisherboats.co.UK

  Thank you once again

  Jenny

  The very simplest would be to make these two images into a single image, placing them vertically like you.  Otherwise, you'd have to encapsulate these two images in a container that is floated to the left behind the enlarged image, but that allows to manage the float in this footer, which may be difficult for you.

• How can I add (gather) two different images into a single image?

  Well, I'm creating a HTML element / CSS Web site. I have two logos that I need to add to the header areas of the Web page. I thought that creating a chart would contribute to this question. I want to be able to add two different images (logos) into a finished product. However, I am having some difficult understand how to combine two different images on the same workspace (tab).  The images would be out there with text in the middle of the space. I would use the 2015 Photoshop, does anyone have and ideas?

  If it was me I open one of the images then go to Image--> the canvas size.  Then expand TI (relative check) of several (12) inches in width and height (choose to anchor the part you want to stay where he is.)

  Open another image and drag it in the first.  Or select all and then copy / paste If you wish, you can you should now have two images in the same file/tab.  Everyone should be on different layers.  Use the move tool to position them how you want.

  Finally go to Image > Trim and leave the default values.  He must cut off all the excess.  Save in any format you want.

  I hope this helps.

• my thumb nails have turned into a generic image

  Hello, pictures of my images have changed to a generic GIF and I try to get the real image as the thumbnail view. I can't change the view when I open my pictures. I have run the checker system files and scanned, but there is no problem. This problem happened after I restored it this system for a period prior to the window help restore. Any ideas on how to get the thumbnails to display a JPEG file? Thank you

  If this article does not meet the question... scroll down
  for the info already posted by: Shekhar S - Microsoft Support.

  Windows 7 - How to enable or disable
  Thumbnails in the Explorer of Windows 7
  http://www.SevenForums.com/tutorials/11738-thumbnail-previews-enable-disable.html
  (Scroll down to: an Option)

  =========================================

  Already posted by: Shekhar S - Microsoft Support.

  Q:
  Cannot view thumbnails

  A:
  Before you start make sure that you are logged on as administrator.
  Then proceed as follows:
  a. first of all, to disable the creation of thumbnail by opening Windows Explorer, by clicking on
  hold the button and selection of folder and Search Options.
  Click the view tab and check always show icons, never thumbnails. Click
  the OK button.

  b. then, run the disk cleanup on the C: drive and empty the cache so that you can retrieve
  disk space. You can find it in accessories | System Tools. Place one
  check the following thumbnails and click OK.
  Click on delete files in the confirmation window. Disk Cleanup will now be
  clear the cache of thumbnails and close.
  Note: This will delete the database of thumbnails and after reboot ing the
  computer it will automatically create.
  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  (c) in Windows Explorer, navigate to the AppData\Local\Microsoft\Windows
  file under your name.
  If you can't find it, simply copy the following text:
  %LocalAppData%\Microsoft\Windows
  Paste it into the address bar and press ENTER.
  d. right-click on the file in Solution Explorer and select Properties.
  e. Select the Security tab.
  f. click on the Advanced button.
  g. in the permissions tab, click Edit.
  h. check to include the permissions that can be inherited from the parent of this object.
  i. click on the OK button on the permissions tab.
  j. click the Yes button in the Windows security box that opens.
  k. close all open mailboxes.
  l. return to the folder and Search Options and uncheck the show always
  icons, never the photos and you're done.
  Mr., restart the computer.

  I hope this helps.

  --------------------------------------------------------------------------------

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  =========================================

• positioning images and text

  I've noticed in muse when you change the size or the leader etc. of a text box, it automatically increases its size to fit the new size of the text (unlike in indesign, photoshop and illustrator)

  
  

  It's cool and not only that sometimes repeat sometimes muse grows automatically any block image or text to the bottom of the page to make space for what it

  
  

  still very cool

  
  

  but then, as does an indesigner, you start dragging images and text on the page around areas and they look very good in design muse, but the preview and the browser sometimes puts higher upwards or downwards more down the page you wanted or expected

  
  

  as I muse and I can not look under the hood and don't want to anyway and cannot change any code (thank God) what should I do?

  
  

  Muse is not all guess it is

  
  

  PS once when I selected the text boxes and tried to move them they stole off the screen in a wild part of the pasteboard and I had to go after them and wrangle that they return to the page
  

  Short and precise: No... You're confusing Muse for a web version of InDesign, which is not. What you describe is normal behavior because the real positioning of elements on a web page is calculated according to the rules of formatting and how they interact with each other. Some of this stuff is figured correctly at design time, other stuff not because we need to run the scripts or formatting rules to be evaluated first. This has always been the bane of any web - design overview is that a preview is a preview, nothing more. You simply don't know how pages can knock out on light in the wrong browser. In your case, looks like just the typical mistake of beginners to plopping at the root of the page without making good use of layers and groups to determine priorities. This and of course you can apply the padding, wide margins and so on or in the opposite direction does not reset rules rather generous padding and margin a few widgets. So in the end, as much as you can not, you down serious things and work up to at least a basic understanding of how the work of formatting of Muse and how it translates a web page once published. Web design isn't just about 100% WYSIWYG.

  Mylenium

• Limited to import into Lightroom 2 image size

  Hi all! I am a person MKT using LR2 on Mac.

  I have a problem to import photos into LR 2. Could not always import all my photos. I wonder is there a limit for the photos I want to import into LR2? I really have to solve this problem.

  for example. Is it possible to import a 2.41 MB photo which is 7729 * 10506 pixels?

  If you guys can do it, it means that there is something wrong my import settings? or something wrong with my MAC?

  IIRC there is a limit to the size, size in pixels, on the side of Long and a total number of pixels, which can be imported.

  You really need get a newer version of LR that expanded this limitation. LR 2 is released in 2008? 7 years ago, and there were 4 major updates since then. Not to mention multiple one-time releases for all of these 4 different updates.

  But what specific problem you encounter when you try to import images.

• SQL to change the negative number to positive number

  My apologies for the no doubt high 'thick-as-a-Board' nature of my request.
  
  Is it possible to convert a negative number by a positive value using SQL. I have a report that joins the 2 tables and I want to join the tables on a field 'amount '. Problem, is that in the 1 table QTYs are negative, and in another QTYs are positive. I know that this is in itself is a stupid thing to do, but anyway.
  
  I was just wondering if there is a simple way to get positive number versions of numbers:
  

  GET sampledata
  WITH sampledata AS
       (SELECT -345 var_num
          FROM DUAL
        UNION ALL
        SELECT -423423
          FROM DUAL
        UNION ALL
        SELECT -323.5
          FROM DUAL)
  SELECT *
    FROM sampledata;

  Any advice much appreciated.
  
  Thank you
  
  Published by: jimr on February 9, 2010 12:38
  Change of subject

  you mean this:

  SQL> ed
  Wrote file afiedt.buf
  
    1  WITH sampledata AS
    2       (SELECT -345 var_num
    3          FROM DUAL
    4        UNION ALL
    5        SELECT -423423
    6          FROM DUAL
    7        UNION ALL
    8        SELECT -323.5
    9          FROM DUAL)
   10  SELECT var_num
   11       , abs (var_num)
   12*   FROM sampledata
  SQL> /
  
     VAR_NUM ABS(VAR_NUM)
  ---------- ------------
        -345          345
     -423423       423423
      -323.5        323.5