NESTS and SNMP

Similar Questions

• LLDP and SNMP

  I have a 81xxF of powerconnect, 7048 switch and 5548 switches bouquets and I would get topology

  LLDP and SNMP

  should the OID I use?

  Eric,

  Here's the OID assignments for all Dell Networking switches.

  The OID industry:. 1.3.6.1.4.1

  Manufacturer OID: Reference Dell = 674

  LOB OID: Networks Dell = 10895

  Example =. 1.3.6.1.4.1.674.10895.1000 is a PowerConnect 5212 switch

  System for all products Dell Netwoking object IDS:

  5212 - 10895.1000

  5224 - 10895.4

  6024/F 10895.3000

  3324 - 10895.3002

  3348 - 10895.3003

  5324 - 10895.3004

  3424 - 10895.3006

  3448 - 10895.3007

  3424 P - 10895.3008

  3448 P - 10895.3009

  6224-10895.3010

  6248 10895.3011

  6224P 10895.3012

  6248P 10895.3013

  10895.3014 6224F

  M6220 = 10895.3015

  3524 = 10895.3016

  3548 = 10895.3017

  3524 P = 10895.3018

  3548 P = 10895.3019

  5424 10895.3020

  5448 10895.3021

  M8024 = 10895.3022

  8024 = 10895.3023

  8024F = 10895.3024

  M6348 = 10895.3025

  2808 10895.3026

  2816 10895.3027

  2824 10895.3028

  2848 10895.3029

  5524 = 10895.3030

  5548 = 10895.3031

  5524 P = 10895.3032

  5548 P = 10895.3033

  7024 = 10895.3034

  7048 = 10895.3035

  7024 P = 10895.3036

  7048 P = 10895.3037

  7024F = 10895.3038

  7048T = 10895.3039

  7048T - RA = 10895.3040

  M8024-k = 10895.3041

  N4032 = 10895.3042

  8132 = 10895.3042

  N4032F = 10895.3044

  8132F = 10895.3044

  N4064 = 10895.3045

  8164 = 10895.3045

  N4064F = 10895.3046

  8164F = 10895.3046

  N2024 = 10895.3053

  N2048 = 10895.3054

  N2024P = 10895.3055

  N2048P = 10895.3056

  N3024 = 10895.3057

  N3048 = 10895.3058

  N3024P = 10895.3059

  N3048P = 10895.3060

  N3024F = 10895.3061

  Dell Wireless devices:

  Controller W-650 = 10895.5001

  W-651 controller = 10895.5002

  Controller W-3200 = 10895.5003

  Controller W-3400 = 10895.5004

  Controller W-3600 = 10895.5005

  W-AP92 = 10895.5006 access point

  W-AP93 = 10895.5007 access point

  W-AP105 = 10895.5008 access point

  W-AP124 = 10895.5009 access point

  W-AP125 = 10895.5010 access point

  W-RAP5 = 10895.5011 access point

  W-RAP5WN = 10895.5012 access point

  W-RAP2 = 10895.5013 access point

  Controller W-620 = 10895.5014

  Hope this helps,

  B

• I can't have a log and snmp in vpn

  Hello

  I can't have a log and snmp in vpn when I want to achieve the management interface, or remote access to asdm and ssh is strange ok.it for your help thank you.

  Best regards

  If you want to access the ASA via a VPN connection, you would not use (or should use) NAT.  You only need to add command -access to the administration .

  So let's say you want to use the IP address associated with the interface named inside of handle the ASA.  Then you go inside management-access command

  --
  Please do not forget to rate and choose a good answer

• Search for characters, nested and apply the Cstyle

  I have

  you want to find the nested applied characters and apply the Cstyle, but my capture of code all the text in a document. Can you please guide me,

  nestedreport();

  function nestedreport() {}

  myDoc var = app.activeDocument;

  var myDocPath = myDoc.filePath;

  var myDocName = myDoc.name;

  try {}

  app.findGrepPreferences = app.changeTextPreferences = null;

  app.findGrepPreferences.findWhat = "^.» + » ;

  myFind = myDoc.findGrep (false);

  var ntexts = new Array;

  for (i = myFind.length - 1; i > = 0; i--)

  {

  if(myFind[i].contents.nestedStyles==null)

  {

  ntexts.push (myFind [i]. Happy)

  ntexts.appliedCharacterStyle = "Nested";

  }

  }

  }

  {catch (e)}

  }

  

  Hello

  I'm still somewhat struggled with the final goal, however to make a small step:

  To detect a string that is formatted using nestedStyle (part of the content of the paragraph), you can use this:

  assuming that ==> text is selected - say a paragraph

  var
    cCharStyle,
    charStyles = app.selection[0].characters.everyItem().appliedNestedStyles,
    step = charStyles.length,
    resString = "";
  
    while ( (cCharStyle = charStyles.pop() ) && step--)
         if ( cCharStyle.length )
              resString = app.selection[0].characters[step].contents + resString;
  
  alert ( resString );
  

  Jarek

• DBMS_SQL. Bind_variable with nested and ORA-600 table

  Hello, I am experimenting a bit with pl/sql and I tried to do some dynamic SQL using DBMS_SQL, but I'm having a problem when variable binding is an array of the neste (had no problem in the same example, if I link with a varchar2 variable).
  
  This is a reduction of the problem:
  

  DECLARE
  
       TYPE CENA_TYPE IS TABLE OF VARCHAR2(30);
       CENA CENA_TYPE;
       L_UPDATE_STMT VARCHAR2(2000);
       UPDATE_CURSOR INTEGER:=DBMS_SQL.OPEN_CURSOR;
       RES INTEGER;
  
  BEGIN
  
       CENA:=CENA_TYPE('HELLO');
       L_UPDATE_STMT:= 'BEGIN '
                           ||'DBMS_OUTPUT.PUT_LINE(:CENA(1));'
                           ||'END;';
       DBMS_SQL.PARSE(UPDATE_CURSOR, L_UPDATE_STMT ,DBMS_SQL.NATIVE);
       DBMS_SQL.BIND_VARIABLE(UPDATE_CURSOR,':CENA',CENA);
       RES:=DBMS_SQL.EXECUTE(UPDATE_CURSOR);
       DBMS_SQL.CLOSE_CURSOR(UPDATE_CURSOR); 
  
  END;
  /

  What I am doing wrong?
  
  Thank you

  Pedro_gloria wrote:

  What I am doing wrong?

  DBMS_SQL runs in the proper context. Therefore, even if the CENA_TYPE type is declared by calling anonymous block is unclear to the anonymous block, you need to perform in DBMS_SQL. Moreover, you must initialize and expand the collection. Use:

  SQL> set serveroutput on
  SQL> DECLARE
    2   L_UPDATE_STMT VARCHAR2(2000);
    3   UPDATE_CURSOR INTEGER:=DBMS_SQL.OPEN_CURSOR;
    4   RES INTEGER;
    5  BEGIN
    6   L_UPDATE_STMT:= 'DECLARE
    7   TYPE CENA_TYPE IS TABLE OF VARCHAR2(30);
    8   CENA CENA_TYPE := CENA_TYPE();
    9          BEGIN '
   10       ||'CENA.extend;'
   11       ||'CENA(1) := :1;'
   12       ||'DBMS_OUTPUT.PUT_LINE(CENA(1));'
   13       ||'END;';
   14   DBMS_SQL.PARSE(UPDATE_CURSOR, L_UPDATE_STMT ,DBMS_SQL.NATIVE);
   15   DBMS_SQL.BIND_VARIABLE(UPDATE_CURSOR,':1','Hello');
   16   RES:=DBMS_SQL.EXECUTE(UPDATE_CURSOR);
   17   DBMS_SQL.CLOSE_CURSOR(UPDATE_CURSOR);
   18  END;
   19  /
  Hello
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  SY.

• nesting and text "tremble".

  Hello

  I'm working on a project and use the trial version of cs5. I have some general questions that. need help with.

  Basiucally what I'm trying to do is create a video with segments moving faster than in 'real time '. What I've done so far is spliced my clips, adding text and images.

  (1) I have many segments that blur some of the clips, so | have items in lines 1-4 video. What I've noticed, is that I can't do the speed of clips with video 1 to 4 elements move more quickly to 100%. I was thinking about the nesting sequence and then trying so that he can go faster. I want to ask you is if I have to make the clips until I have the nest – or if it doesn't matter when I go (just before the completion of the project).

  (2) I have created a few images in the text using powerpoint. Basically, they are created in powerpoint and saved in the *.png format slides. I imported the CS5 files and included as images. I chose to do it this way because it is much faster to include the text compared to the use of the module of titration. What I noticed, is that when the music plays and he gets to slide it almost looks like parts of the text trembles. I had to scale the images to the size of the image. I was wondering if there was a way to fix the Aspen. It's probably on the scale or because it is saved as a png?

  Thanks for your help.

  K

  Ahhhh, OK. Now, I understand. Are you curious about rendering for the preview. Depends largely on the system you are using, and the rendering is necessary to allow smooth playback within the first to view smooth playback at maximum frame rate in systems running with limited resources. My system is a little older, but it is a quad core 3.2 G with 32 GB of memory and a video card in 1.5 G Quadro FX5600. I get a smooth playback most of the time, unless it's a very complex sequence with many items. However, I don't think that encoding is affected by nesting or rendering. The encoded file will playback smoothly, without worrying, unless that the encoded video machine is a very weak graphics card - in which case you may not help him without reducing the size of the project. Rendering simply gives you the ability to preview the file at full speed and resolution. If you need to confirm that everything goes properly, then it makes sense. If you can see already at full throttle without rendering, so I do not need. About your original question - I think not only will have no effect on nesting or vice versa.

  Scaling images shouldn't have any ill effect, as long as you reduce it. You should not worry about how he plays, because once the video is encoded, it should be smooth. If you want to see the Power Point files at full resolution and that your system is having trouble playing it back, then by all means, make this section of the timeline, and you will be able to see how the final output will appear.

• SFE2000 and SNMP Configuration Switch SGE20x0

  Hello

  I'm looking for the OID of the memory, but I can't find them. I found the mib to SGE20x0, who also works for the SFE2000 here switcch

  http://software.cisco.com/download/release.html?mdfid=282414067&softwareid=283415684&release=3.0.0&relind=AVAILABLE&rellifecycle=&reltype=latest , but there is no OID pick-up for memory. Is no OID for memory available?

  Concerning

  Jürgen

  Hi Jürgen, the information contained in the link is the information documented and supported.

  If the OID / name of the object is not listed you want is essentially not supported.

  If you haven't already done so, you can try to walk to the database and analyze the results to see if there is anything close to what you want.

  -Tom
  Please mark replied messages useful

• Get started with OpenManage / IT Assistant and SNMP.

  Hello

  I have 8 Dell poweredge servers.

  They have all the power supplies redundent and raid 1.

  If there is a problem, it appears in the LCD display on the side front of the server.

  However... I'm about to send off to a data center and is no longer able to see the facades of my servers.

  How to make the machines simply send me an email when they feel the need to display a message on the LCD screen. So I can remotely see what is happening.

  I reflected on this and tried Assistant and Assistant to the server but it gets ridiculously complicated when all I want is the error sent to me.

  These are critical machines and so far it seems IT Deputy can do software updates and a lot of things on the remote machines that I don't want. This is related to a security risk or will simply another thing to fool you that will have the machine with her!

  My question is how the machine to send me his problems.

  The main, I want to know is failure of HDD, redundent power failure, maxing out CPU and drives low on space.

  Any help on this would be really welcome. The closest I got settled assistant server on a machine that seems to be able to generate alerts, but strangely, there doesn't seem to be able to send them by email, but oddly, he can do a popup will appear on the screen, if someone is logged.

  Many thanks in advance,

  Simon

  
  

• Configure the file snmp.xml on 5.5 ESXi via PowerShell and PowerCLI

  Hello:

  I wonder if there is a way to configure the file snmp.xml on the ESXi host (/ etc/vmware/snmp.xml) using the script? I have root password and you want to be able to day/edit this file remotely...

  Thank you very much!

  To use the Set-VMHostSnmp cmdlet you must be directly connected to the ESXi host. The following example will connect to an ESXi host named ESX01 and SNMP sets active and a community example of community read-only (example 1 of using Set-VMHostSnmp):

  SE connect-VIServer ESX01

  $vmhostSNMP = get-VMHostSNMP

  Game-VMHostSNMP $vmhostSNMP - active: $true - ReadOnlyCommunity example 'Community '.

• is there a way to NEST or MERGE videos and keep the audio waveform in the timeline?

  Hi guys,.

  I was struggling with solutions for my workflow.

  I do a lot a microphone on a single video track changes. Then when I want to apply and modify the presets, I must apply the effects on all the small changes (sometimes 100 edits in a 3 minute clip).

  So I learned about fusion - but the merger does not allow you to modify the effects in the batch. So in the above example, if I want to make a change in an effect in a merged item, I have to hold single OPTION click on all editions of 100 and then adjust the effects.

  Then I bent over the NESTING. It works pretty well because it transforms all 100 mounts in 1 clip and I can't batch "edict", which means that I can change the effects on all editions of 100 at a time (because it's now 1 clip on the timeline). "

  However, the problem I have now nesting is... get rid of the file audio waveform in the timeline panel. So now, it is difficult to edit audio.

  Is there a way to merge, merge or nest together to make 1 clip (like nesting) and also to keep the audio waveform on the chronology of the changes?

  Kind regards

  Try the sequence > rendered audio and see if you get a waveform.

• ID and effects in nested MXMLs

  OK, my application is becomes too great, so I'm nesting and man.... it was Chaos!
  
  OK, this should be very simple, but how do I access the ID of a nested MXML? It should be as easy as just using the id, but it is not... I tried also with getChildAt(), but it seems that you cannot nest some getChildAt()... ex: id.getChildAt (1) .getChildAt (0)
  
  I'm just trying to add effects to the components of a Canvas in a MXML nested using target = "{id}. When it was all in the same file were not any problems. Is it possible to do just in MXML?
  
  Migrating from ActionScript 2 or 3 does not seem easy to... I have very big problems to get used to this thing...

  You should be able to use '. ' notation per point for any nested mxml component. If you add objects with the action script, then they must be declared public to make it work. So if you have a form that you built with a firstName field stored as an external file, you must reference the field as:

  formInstanceID.firstName

  where formInstanceID is the ID you assigned when you included the form file

• SNMP help please?

  Hello

  I'm all new to SNMP, although I have used LabVIEW a few times in recent years. Office supplies for the moment, I am developing an application to test the power. We use a G756N Dell PDU for each switching power. I tried a couple of approaches to control and SNMP is the most promising so far. During my research I came across free ManageEngine MibBrowser and I could find the last MIB to download the firmware from Dell here. I was able to communicate with the UDA and points of sale under and out so far, but I really need to integrate control of the PDU in the application of LabVIEW to automate tests. I'm pinned Mark Yedinak and his APC PDU SNMP communication library, only the most recent of which I found examples in this thread.

  I tried to do a VI to test communication in LabVIEW using the OID I received from MibBrowser, but it returns an error code 2, noSuchName. The PDU is configured to use SNMP v1 and the public and private communities write access +. I tried with and without the main point, but without success. I'm using LabVIEW 2013 64-bit. Could someone please review the information below and see what I could do wrong, or that the direction to take to solve the problems there?

  Thank you

  Simon

  MIB object IDS:

  . iso.org.dod.internet.private.enterprises.dell.pdu.pdusub.hardware.rPDU.rPDUOutlet.rPDUOutletSwitched.rPDUOutletSwitchedControlTable.rPDUOutletSwitchedControlEntry.rPDUOutletSwitchedControlCmd

  . 1.3.6.1.4.1.674.10903.200.2.200.130.1.4.1.4.1: {1 or 2}

  I added le.1 at the end of the index to the first exit, and 1 variable is instantaneous, while the 2 is instant off

  Photo

  

  VI:

  Front panel:

  

  Wiring:

  

  Link to examples of SNMP Communications and APC_PDU.zip:

  http://forums.NI.com/T5/LabVIEW/APC-ups-with-desktop/m-p/2431528/highlight/true#M749059

  For some reason, I can't the real VI set. The MIB is too in the archive. Its in my selection here:

  https://DL.dropboxusercontent.com/u/10871313/power%20Supply%20Testing.zip

  Thanks again

  
  

• How can I get the names of control within nested groups? RT

  I decided it was cool to have nested clusters. For example, all of the analog data, I read in my review is in a single cluster, which consists of categorical clusters (IE 'pressure', 'temperature', etc.). Now is the time to save data in the .tdms file, and it would be really handy generate a pair of paintings in this cluster 'root' containing all the digital control labels and their data.

  I found this thread, http://forums.ni.com/t5/LabVIEW/Is-there-a-quot-Get-Cluster-Names-quot-VI/td-p/666555, that uses a property node to retrieve the control labels in the root certification cluster. It's great, but I only get the labels of nested (and none of their items) clusters.

  My lab-fu is not strong enough to find an elegant solution for this. I can brute force of unbundling and indicators, then using the property noted separately on them... but I think there must be a better way!

  The attached VI is my best effort to solve this. It works, but I fear that it is not the best code for the following reasons:

  1. am I really allowed to point to elements of the façade at RT will be deployed this Subvi in one executable startup?

  2. If the Subvi is in a loop, what should I do instead of 'build array' in order to avoid the memory use? All examples use it I read so much about how I shouldn't... and what the functional alternative?

  Thanks a lot for your time!

  Here's a version that uses the variant screws, will take care of any level of nesting and work on RT. The use of Delete of table and table to build is not too efficient, but should not be a problem if you only run this once when the program starts. If you use the Type Cast to convert a cluster in a table as shown here, all numerical values should have the same representation (IE do not mix single and double-precision floating points, or integers (ints) and floating point values), otherwise you will get weird data without warning or error.

  

  Also, your original code had a displacement uninitialized register. Pay attention to that - if you were to run this code twice, the second time that the table of data labels would be twice longer as it should be, because the shift register would be initially contains the values in the first round.

• OME 2.0.1 and Brocade M5424 fc switches

  Hello

  I have problem with OME discovery/inventory abd Brocade M5424.   4 M5424 brocades are defined as 2 M1000e chassis access gateways, problem is this discovery/inventory OME found as a fibre channel switch with 4 ip addresses.

  Inventory and discovery works well with all the other components of these 2 chassis, only fc switches I have this problem.

  M5424 have unique host names, single ip addr. and snmp is defined.  OME same troubleshooting tool gives me the correct result when the connection on these switches CF test.

  Anyone with the same problem?  Mode gateway may be the source of this problem?

  Thanks for any help

  Martin

  
  

• 5548, 7048 - PowerConnect backup SNMP configuration

  Hello

  I Powerconnect 5548 and 7480 switches and I would like to know if it is possible to backup with TFTP and SNMP commands configuration files, like I do with my cisco switches?

  Thank you.

  You should be able to use rlcopy which is OID.1.3.6.1.4.1.89.87

  Location of the source Rlcopy.1.3.6.1.4.1.89.87.2.1.3

  Rlcopy the ip address of destination.1.3.6.1.4.1.89.87.2.1.9

  Updates of the firmware also contain the mib files, so you can find the OID http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=JRCF6&fileId=3365034200&osCode=NAA&productCode=powerconnect-5524&languageCode=EN&categoryId=NI