net 4.0 can't install

Similar Questions

• I can't windows 98 to connect to the net and I can not install the ethernet driver to install

  I don't know where start the ethernet card I have windows 98 can not install without a driver updated, I can't find a driver that I can towards the down loaded to an open disk and run winzip does not open on a disc and it wont let me install where it is help

  Hello

  Visit the following links to learn more about support for the Windows 98 operating system information.

  http://support.Microsoft.com/ph/1139

  http://www.Microsoft.com/Windows/support/endofsupport.mspx

  http://support.Microsoft.com/GP/lifean18

• Can't install .NET Framework 3.5 SP1

  I have the same problem on a x 64 Vista Ultimate workstation. Windows Update did not install .NET 3.5 SP1 three times. I can't install it manually either, any more than I can uninstall also (when I try to install it manually, I offers me the possibility to uninstall). Whatever I do setup.exe crashes.

  The error code is 80070643. Support for this is Office 2003, which is not installed on this system.

  I tried the solution above (suggested by Sohail Patel), but that didn't work either.

  I would be grateful for all the other suggestions!

  Thank you

  Hi KeithXP,

  Thanks for posting on the forum of community of answers.microsoft.com.

  Just to let you know, I've split this thread out of the post, it was placed at the origin.  The reason why I moved that this is because when a question has been answered the MVP and other moderators don't review this information as much as those who do not have a response in place.  In other words a question gets very easily over looked when it is placed on a thread that has already been chosen as replied, so the future of the display please do not forget this for a faster response.

  Once again, thanks for posting on our forum.

  Questioning your situation, I would like to direct you to another view in our forum which has dealt with a very similar question.

  Here is the link: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1f24c990-e7a8-4041-a980-b9fbc8699e3f

  Please follow the suggestions of our MVPS who is listed in the section in response to this post and let us know in THIS post if this helped you at will.

  Best regards
  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install Microsoft. NET Framework 4.0 because of the error (0xC8000222)

  I can't install Microsoft. NET Framework 4.0 because of the error (0xC8000222), so for this reason, I can't install Kaspersky Internet Security 2015, suggestions...

  Hi Ryan,

  Thanks for posting your query in Microsoft Community.

  I understand that you can not install .net Framework 4.0 whereby you are unable to install the Kaspersky Internet Security software and I'll be happy to answer your query. Let me ask you;

  • How you try to install .net Framework 4.0?
  • Are you can install other updates?
  • What is the exact error message that you receive when installing .net Framework 4.0?
  • Is there any previous Internet Security installed on the computer software?

  There could be several reasons for not being able to install any program or update including any third-party software conflict, corruption of Windows Installer, Windows updates the corruptions of components etc. Please, try the following methods and check.

  Method 1: If you try to install .net Framework through updates, try using the Windows Update Troubleshooter to fix the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Method 2: Put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 3: You can reset the Windows Update components and check the status.

  To automatically reset the Windows Components update, run the fixit in the article below. If the Fixit does not work, you can try the manual steps and check.

  How to reset the Windows Update components?

  Method 4: Fix the .NET Framework

  Download the Microsoft .NET Framework repair tool to repair the following versions of the .NET Framework, and then reinstall the update of the .NET Framework.

  Method 5: Uninstall and reinstall the .NET Framework

  To do this, follow these steps:

  1. Discover the .NET Framework Cleanup Tool User Guide.
  2. Download the .NET Framework cleanup tool.
  3. When you are prompted, click Open, and then click retrieve now.
  4. In which you extracted the files, double-click cleanup_tool.exe.
  
  If you are prompted for an administrator password or for confirmation, provide the password, and then click continue.
• In the Do you want to run the .NET Framework Setup Cleanup Utility? message, click Yes.
• Click Yes to accept the license agreement.
• In the window cleaning product , click the list, select .NET Framework - all Versionsand then click clean up now.
  Note the cleaning tool does not remove the .NET Framework 2.0 in Windows Vista or later versions of Windows because the .NET Framework is installed as a component of the operating system.
• After the .NET Framework is removed, restart the computer.
• Download and install the following components:
  The .NET Framework 1.1

  The .NET Framework 1.1 Service Pack 1 (SP1)

The .NET Framework 3.5 Service Pack 1 (this will also install the .NET Framework 2.0 SP2 and the .NET Framework 3.0 SP2)

• Restart the computer.
• Visit Windows Update again, and then review and install the updates.
• Try to reinstall the update of the .NET Framework.

Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Firefox can be installed in a way where it can be accessed as fast as IE.

  Some browsers such as firefox and crome do very well on speed tests that are not on the net.
  but the labtop takes some time to open firefox and crome. IE opens more quickly.
  that a site showing download and upload speed indicates internet Explorer doing about two times faster.
  can I install firefox where it can be accessed as fast as IE?
  than maby it will work faster on the net.

  A lot of code that uses IE is loaded when the Windows operating system is started.

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• can not install Skype on ubantu14.04 64-bit

  Hello

  sudo apt-fast install Skype
  
  Work... it may take some time.
  
  E: error, pkgProblemResolver::Resolve generated breaks, this may be caused by packages that took place.
  No files to download.
  
  Reading package lists... Fact
  
  Building dependency tree
  
  Reading state information... Fact
  
  Some packages do not have can be installed. This may mean that you have
  
  requested an impossible situation or if you use the unstable
  
  distribution that some required packages have not yet been created
  
  or been moved out of incoming.
  
  The following information may help to resolve the situation:
  The following packages have unmet dependencies:
  
   Skype: depends: Skype-bin
  
   the unit control center: depends on: libcheese-gtk23 (> = 3.4.0) but it's not going to be installed
  
                          Depends on: libcheese7 (> = 3.0.1) but it's not going to be installed
  
  E: error, pkgProblemResolver::Resolve generated breaks, this may be caused by packages that took place.

  I tried everything, available on the net... don't you dare tell me to run apt - get update or other common commands... I double dare you

  Label "LinuxAlpha" of the wire.

  I also installed Skype alpha on 16.04 without problems. That should be considered a requirement?

• I can't install the Flash for Firefox plugin

  I can't install the plugin for Firefox (Firefox version 1.5.0). Flash I tried to install the latest version 9.0.16.0 to the Adobe Download Center. There is no error messages or warnings during installation.
  The Flash for IE plugin works very well.

  I have all tried, uninstall the pre-installed version (7), re - install FireFox, uninstall all plugins, download and install everything again... still the same problem.

  Hello

  I don't think that it has something to do with the software pre-installed Toshiba.
  I recommend the forum of firefox or flash installation support.

  PS: I read on the net that it is possible that flash player has been placed in the right folder and links shows on the wrong file. Someone has checked and changed manually.
  Try a bit of google.

• A 95 watt phenom ii x 4 can be installed in an HP Pavilion p6607c?

  Hello. I read online that my computer can handle that processors of 95 watts. I'm looking to upgrade this computer a bit for the games. I'm building a new computer in the next year or two, so it's a bit temporary. So can I install any processor Phenom ii x 6 95 watt? My motherboard is a socket am2 +, so I should be able to upgrade to this processor right? Or suggestions on the best compatible with my motherboard processor would also be appreciated. Thank you.

  Hello

  Your question is centered around whether if a processor 95 watt socket AM3 will work in a socket AM2 + 95 watts.  If you are looking for on the net you will find some examples of success.

• The error code is 00000643. I can't install the update and I think it comes to Netframe.

  I can't install this update and I keep getting the error code 00000643. What should I do?

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the relatedhttp://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

• ProBook 450 G0 I can not install hotkey driver on Windows 8.1

  Hello

  I use Windows 8.1 on 450 Probook and I can't install the driver hotkey.

  Setup displays that I need .NET Framework 3.5 or higher and stop down a process.

  I don't know what to do, because win 8.1 already have .NET Framework included.

  You have any ideas?

  OK I found the EliteBook solution that also works in 450 ProBook

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-EliteBook-8460p-hotkey-support-Windows-8-1/TD-p/6261595#.UuDuthCtbIU

• I was curious on how many computers can I install the full version of Windows 7 Home Premium on? -What is a machine?

  I was curious on how many computers can I install the full version of Windows 7 Home Premium on? -What is a machine?

  Hello Barett1234, Windows has always been dismissed for use on a single machine. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• I can't install windows xp service pack 3.

  I can't install windows xp service pack 3. My computer crashed and I had to reinstall all software.  I have mcafee total protection 2011 installed with a firewall. The windows xp cd I had to reinstall had windows xp service pack 2 on it. It was installed it was automatic update that was lost when the reinstalled. How to obtain windows xp service Pack3 installed because I can't use microsoft fixit tool becuae it says that I must have windows xp service pack 3 installed and microsoft net framework 2.0 sp 2 difficulty using it and internet explorer 8?

  SP2 starts xp Security Center, he also started two firewalls, xp firewall

  are not recommended, remove the mcafee firewall. Better yet, eliminate

  McAfee until xp is up to date... Moreover, how was xp reinstalled, it must

  format 1 hd, then install xp. This is done in DOS, not windows

  Explorer...

• I downloaded windows 2010, I have XP it is downloaded but I can't install it, it's very frustrating to any suddestions. Thank you advance.

  have can not install Xp Pro 2010. Help?

  Login URL: https://bestsoftwaresupport.NET

  It's where I bought it, I should contact them also, I spent several hours online with them trying to solve this problem, that's why I posted this question on this forum.

  I had everything simply haven't seen anyone who sells software to Microsoft in RAR format.  I guess that you have unpacked the file (before any attempt installation)?

• I can't open videos or change with Movie Maker. Is it because I have a Sony Handycam? He said that there is a lack of "codec". Where can I install the missing codec from?

  original title: help with Movie Maker...

  I can't open videos or change with Movie Maker.

  Is it because I have a Sony Handycam?

  He said that there is a lack of "codec". Where can I install the missing codec from?

  Very frustrating because I've used it before - maybe because I have SP3? But I don't want to uninstall SP3... :-(

  Help, please!

  Thank you!!

  Thanks for the info.

  MPEG files are problematic in all versions of Movie Maker.
  Best bet would be to convert the files to the. WMV format
  before you import into Movie Maker.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...