NET Framework on Satellite L500 error message

Similar Questions

• Satellite L500 - error in Windows backup

  Having a Satellite L500 Windows 7 32 bit. Windows backup on the external drive is not (LONGER) work. Message: Last backup failed. Error message 0 x 8007002.

  Can set the restore/recovery point and can back up restore/recovery points, but cannot save actively / data backup on the external units with Windows tools. Council of Toshiba to 'secure your laptop' does not work as well. If possible, do not restore the entire operating system.

  Thanks for your help.

  Hey,.

  To be honest, I doubt that this question has something to do with Toshiba

  Did you already check Google for links?
  http://igtfy.com/?q=Windows+backup+error+0x8007002

  I found an answer that cleaning the registry with CCleaner (or another program) worked him would be worth to try ;)

• Satellite L500 - error F3-F100-0004

  Hi, my Satellite L500 displays this error message F3-F100-0004.
  Can anyone help on this?
  Any help much appreciated. Thank you.

  Hey,.

  When you receive this error message?

  Can you post a screenshot?

• Satellite A305 - error message keep appearing from

  Hello, I have a Satellite A305-S6857 laptop
  A few days ago to XP downgrade Vista. It worked well but suddenly yesterday when I restart windows,.

  * the system has recovered from a mistake of the serosa

  A log of this error has been created

  For more information about this error, click here * so I clicked and it said

  error signature
  BCCode: 1000007e BCP1: C0000005 BCP2: BA430F76 BCP3: BA513C94
  BCP4: BA513990 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  So I simply ignored, did cancel but it keep poping up and I made reports but it did not work either.
  So I restart again but still the same. Every time I have restart this pop-up.

  So I googled on this topic and I've done something and I think after I did uninstall and reinstall a driver GMA an another error message too. It says * the Publisher could not be verified. are you sure you want to run this software? * and I say yes, he shows me another one same thing 3times.

  It's really annoying and after that I got a few messages pop up, my computer has become slow and sometimes it stopped

  help me guys...

  > He says that the Publisher could not be verified. are you sure you want to run this software?
  Maybe something wrong with the graphics card driver or other software which is not certified by Microsoft

  Did you use some third-party software, tools and 3rd applications?
  Have you installed the drivers from Toshiba or other websites of third 3rd page?

  Check the msconfig-> Start up tab and take a look at the list of background processes.
  If there are some applications that are not known to you, then turn it off.

  In the worst cases, you need to reinstall the OS.

• Satellite L40 - error message during the installation of value-added package

  Hello

  yesterday I installed Windows 7 Professional 32 bit on my Toshiba Satellite L40 PSL40E, everything works fine except the volume on FN + arrow keys/esc control.

  I tried to install all of the packages available to fix the problem, but I can't install the VAP. Every time as I try, I get this error message: error installing PVAT [0x8146045B].
  I ran as administrator and also tried compatibility mode.

  Help please, thx!
  Constantin

  Hello

  Before that you can use the FN keys and other special functions that you need to install Toshiba Value added Package.
  My question is: have you downloaded the package of value added for Satellite L40 (PSL40E) and Windows 7 32 bit? It s is already available for the new Windows 7:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have installed the drivers first? They must be installed first normally, e. g. chipset, screen, sound, LAN driver, etc.

• Satellite A65: error message 'resume failure press any key' and no start

  Satellite A65 has just had the replaced dc power jack.
  Unable to access bios, esc and f1 key have no effect. Battery is fully charged. HD and ram, no change.
  Help!

  Hello

  I found this tip in the forum:
  If the laptop uses a Toshiba BIOS this:
  When the TOSHIBA logo is shown, be very fast and press the ESC key several times.
  You should get an error message and press F1 to enter BIOS.
  Search mode power-up (or something very similar). Set it to BOOT.

  In addition, you can try to access the BIOS and set the BIOS settings by default and safe change.
  Maybe it helps.

• Windows family vista premium 64-bit fails to install net framework 3.5 sp1 error code 1603

  I tried several times to install this update for net framework and have had no success at all. I searched for an answer and also failed with that as well. I thought that I have that would give a shot. It's probably something very simple, but you know how it goes with computers. I'll paste the log of the try to install net framework 3.5 sp1 below:

  [03/18/09, 02:06:23] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 02:06:26] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [03/18/09, 02:21:03] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 02:21:06] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [03/18/09, 16:30:20] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 16:30:23] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [19/03/09, 13: 32:50] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [19/03/09, 13: 32:56] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [19/03/09, 14:32:11] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [19/03/09, 14: 32:14] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.

  That's what the Setup log gives me after that windows is unable to install net framework 3.5 sp1. I sure would appreciate it if someone could help me solve this problem. I just bought this pc about 2 months ago and it's the first question that I lived with her. Thank you

  To successfully install the update, uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer. You may need to work through more than one of the following methods.

  Method 1: Manually remove and reinstall .NET Framework

  To remove and reinstall .NET Framework manually, follow these steps:

  1. remove the .NET Framework.

  a. Click Start and then click Control Panel.

  b. double-click Add or remove programs.

  c. Note each version of the .NET Framework is already installed on the computer. Then, uninstall all versions of the .NET Framework.

  d. When you are prompted, restart the computer.

  2. use the Windows Installer CleanUp utility to clean up the State of MSI database for all versions of the .NET Framework.

  .      Download the Windows Installer CleanUp utility. The following file is available for download from the Microsoft Download Center: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  a. install the Windows Installer CleanUp utility as an administrator or a user account that is a member of the local Administrators group.

  b. Click Start, point to all programs and then click Windows Installer Cleanup.

  (c) in the Windows Installer CleanUp utility, remove all Windows Installer for the .NET Framework applications.

  3. restart the computer.

  4. download and reinstall all the versions of the .NET Framework that were previously installed on the computer.
  To download .NET Framework 3.5, visit the following Microsoft Web site:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en (5. When you are prompted, restart the computer.

  Note When you have reinstalled all the versions of the .NET Framework, you can use Windows Update to check for the updates of the .NET Framework.

  Method 2: Use the .NET Framework automatic cleanup tool

  This tool is not designed as a substitute for the standard uninstall procedure. You should try to perform an uninstall by following the steps in method 1, earlier in this article, before using this cleanup tool.

  The .NET Framework cleanup tool removes the .NET Framework for you. For more information about how to obtain and use this tool, visit the following MSDN Web site:

  http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx

  Note that this cleanup tool deletes shared files and the registry keys that are used by several versions of the .NET Framework. To ensure that all versions of the .NET Framework work correctly, if you run the cleanup tool to remove the .NET Framework, you must first remove all installed versions of the .NET Framework using this cleanup tool. Then, you must reinstall all previously installed versions, starting with the version number the lowest.

  Suppose you have the .NET Framework 1.1 and .NET Framework 2.0 installed on your computer, and you plan to use this cleanup tool. In this scenario, you use the cleanup tool to remove the .NET Framework 1.1 first and then use the cleanup tool to remove the .NET Framework 2.0. After you remove the two versions, you reinstall .NET Framework 1.1 and then install the .NET Framework 2.0, in that order.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

• Satellite C650 - error message at start up - GeFIF89ay not found

  This message appears whenever I start Toshiba C650 "the procedure entry that gefif89ay point could not be located in the dynamic link library kernel32.dll. Help, please

  Hello

  I see this error message for the first time and research using t n GeFIF89a a lot.
  I didn t find any success about the GeFIF89a.

  But I could find a few hits searching the + procedure entry point could not be located in dynamic link library kernel32.dll +

  In many cases, people have said that Windows update has solved this problem
  Check it!

  PS: I also recommend the system using the CCleaner, this small tool helps you clean many registry problems.

• Satellite L500 - error at startup

  When I start up I get an error message "an error has occurred. Error #-5 "."
  The message invites me to "Visit http://consumer.installshield.com for more information."

  I have visited the site, but have not been able to find the error message that is mentioned and I headed to my software for a solution provider. Can someone give me help to identify the error? At this point, I can say that this error message does not appear when I load Windows 7 on my desktop computer.

  ronswold

  There was the user with the same error, "year error occurred." Error #-5. It's indicator update Installshield that is not important, you can delete just to autostartup in msconfig. It will no longer appear

• Satellite M30 - error message after replacing the DVD drive

  Virgin, excused my English ;)
  I have a satellite m30 and I replaced the DVD-cd-rw drive in series with a SLIM NEC ND-6650 DOUBLE LAYER, DVD time bios gives me error
  0203: failure IDE #2
  Is it possible to remove this message?

  Hello

  As far as I know that this message can not be eliminated and it happens every time if you want to use the drive is not compatible. Always is it that all readers may not work with all models of laptops.

  In this case, fundamental problem is the pin assignment. It is not the same in all players.

  Good bye

• Satellite A200 - error message on Bule screen when I do something hard

  I have a laptop is the details below

  * Name model: Satellite A200 - 11 C *.
  * Model No.: PSAE0E-00X00KAR *.

  I installed Windows XP (Service Pack 2) on this subject. After installation, when I try to play video file or search for viruses or to work for a long time it displays a message on blue screen. The Message is as below:

  * A problem has been detected and windows has shut down to avoid damaging your computer
  * If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: *.

  * Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.*

  * Check with your hardware vendor for updates to the Bios. Disable the Bios memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.*

  * Technical information: *.

  * STOP: 0X0000008E (0XC0000005, 0X00000000, 0X8057064A, 0XA95718B8) *.

  Starting from physical memory dump *.
  * The physical memory on the drive of dumping: *.

  According to the message, I update the WOOD, but I still facing this problem?
  Waiting for your response.

  Russell

  E-mail: or * [email protected]

  Hello, Russell

  A few days ago, I have similar problem on my Satellite P200. After you install a third-party application, I got BSOD every time when this application loads. I tried anything possible. To start in safe mode and change the boot options, OS restore to an earlier time using System Restore tool. I also tried to remove application preinstalled in safe mode but nothing has helped.

  In the end, I installed OS using recovery DVDs.

  So, in my case, I was sure why this happens. What is with you? This happens if you use some applications? What player and antivirus do you use?
  The same happens when you try to use Microsoft's Disk Defragmenter?

• On Satellite A200 error message: could not open the ACPI ATK0100 Kernel Mode driver

  Hello

  I have laptop Satellite A200
  When I run the windows (vista) I get the following error: * 'Can t open ACPI ATK0100 Kernel Mode Driver.*'!
  I installed all the drivers and the error remains.
  I installed all the drivers on the Toshiba site, but the problem persists.
  The Device Manager shows me that each device is working properly.

  Someone at - it a solution?

  Thank you

  ACPI is the installation of your Windows operating system power management. If this fails you may need to run a recovery system on your computer. You can do this with the hidden partition on your hard drive, but this will erase all data on your machine. If this does not resolve the problem, you may consider making your hard drive, checked bad sectors, as this may have failed.

  I hope this helps. :)

• Satellite A60: error messages on blue screen appears all the time

  Hello

  I had a Toshiba A60 satellite for awhile. It has been great so far, but I'm constantly getting blue screens of death, with millions of stop error different etc, I have read everywhere and updated to the latest BIOS, but still no luck.

  I don't know what to do, he gets the errors blue screen randomly, sometimes, the laptop can last an hour or two, then sometimes it shuts down quickly, please help me as soon as POSSIBLE.

  Thanks in advance.

  ~ Icesolar

  Hi Icesolar

  According to me, you know that there is no magic solution for BSOD problems. As far as I know, it happens more often because of pre-installed software. On my camera, I got only 3 times and always after installation of some third-party applications.

  Have you noticed something similar? BSOD is started after you install an application? Try to delete the most recent pre-installed software, or restore the system to an earlier time before BSOD begins to appear.

• Satellite L850 - error message after installing the Realtek Audio driver

  Hi guys.
  I have a Toshiba Satelite L850 PSKG8A-07E001.

  I've upgraded to 8.1 Windows 64 bit

  Toshiba Service Station software advised to update my sound driver 6.0.1.6794 to 6.0.1.7023.

  It says to uninstall the driver installed before you install the new driver.

  I uninstalled 6.0.1.6794. Then I installed 6.0.1.7023 and received the following error.

  * Error code:-5009: 0x8002802b *.
  * Error information: *.
  * > Ctor\ObjectWrapper.cpp (163) *.
  * > Ctor\ObjectWrapper.cpp (402) *.
  * > Kernel\Component.cpp (1163) *.
  * > Kernel\CABFile.cpp (389) *.
  * > SetupDLL\SetupDLL.cpp (1541) *.
  * pAPP: Realtek High definition Audio driver *.
  * PVENDOR:Realtek Semiconductor Corp.*
  * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
  * $11.50.0.42618 *.
  1408.1410* BT_OTHER *@Windows (9200)

  Then I tried to install the old one back and received the following error.

  * Error code:-5009: 0x8002802b *.
  * Error information: *.
  * > Ctor\ObjectWrapper.cpp (163) *.
  * > Ctor\ObjectWrapper.cpp (402) *.
  * > Kernel\Component.cpp (1163) *.
  * > Kernel\CABFile.cpp (389) *.
  * > SetupDLL\SetupDLL.cpp (1541) *.
  * pAPP: Realtek High definition Audio driver *.
  * PVENDOR:Realtek Semiconductor Corp.*
  * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
  * $11.50.0.42618 *.
  1380.1382* BT_OTHER *@Windows (9200)

  Now the original driver was designed for Windows 8. I am now running Windows 8.1.
  The new driver does not work. What should I do?

  I have loged on Toshiba's web page for this laptop downloads. The 6.0.1.7023 driver does not exist.
  Where to find gas station?

  ZEFS.

  > Where to find gas station?
  Good question. My question is: why change something if not necessary?
  In any case, have you tried to remove this driver and install an old?

• Impossible to activate the WLAN on Satellite A100 (error message)

  HI - please excuse me if I'm missing some information here, I'm not used to dealing with computers and don't know all the technical terms!

  I use my laptop computer for 4 years and never had any internet connection problems. Use wireless this morning, and by the middle of the afternoon he had "disabled" itself. I tried to activate it (in ConfigFree) but get the message that "the question does not switch '-'Devices '.

  In detail, the three problems proposed are not the cause, none of the items are open. When I run the connectivity ConfigFree doctor, it just tells me again that my wireless connection is turned off.

  I am temporarily able to use another laptop and have tried to install the latest driver, does not. I also did a system restore to last week, but even once, he touched nothing.

  If someone could shed some light on how I can reconnect to the internet it would be much appreciated as I am only able to connect wireless to this place. If I missed any vital information, sorry! As I said, I don't really know what I'm talking about here...

  Thank you

  Hello!

  Have you checked if WLAN is actually enabled on your laptop? You can turn on or off with the switch of material that needs to be defined on and key combination FN + F8. Check this box!

  Also have a look in Device Manager if the wireless network card is installed correctly. In your case, I would also try an update of the WLAN driver.

  If you have any other questions, please let us know! :)

  Good bye