Satellite L500 - error F3-F100-0004

Similar Questions

• NET Framework on Satellite L500 error message

  I have just boupght a Satellite L500 and installed some software from my old laptop. Whenever I start I noew to get an error message telling me I need NET. version 2 of the Framework. I tried this download from Microsft site but my phone tells me that a newer version is already installed.

  Can someone tell me how to get rid of this error message?

  Hello

  What seems like the old installed software need Framework 2.
  Eventually he s is not compatible with the new framework

  You may have to remove the installed frame of the system first.
  Then after reboot again and cleaning of registry (using CCleaner for example) you could install 2 new framework

  Good luck

• Satellite L500 - error in Windows backup

  Having a Satellite L500 Windows 7 32 bit. Windows backup on the external drive is not (LONGER) work. Message: Last backup failed. Error message 0 x 8007002.

  Can set the restore/recovery point and can back up restore/recovery points, but cannot save actively / data backup on the external units with Windows tools. Council of Toshiba to 'secure your laptop' does not work as well. If possible, do not restore the entire operating system.

  Thanks for your help.

  Hey,.

  To be honest, I doubt that this question has something to do with Toshiba

  Did you already check Google for links?
  http://igtfy.com/?q=Windows+backup+error+0x8007002

  I found an answer that cleaning the registry with CCleaner (or another program) worked him would be worth to try ;)

• Re: Satellite L500 - error if I start recovery disc creator

  Hi all, just tried to launch the creator of media recovery on the map of Toshiba and the following ERROR CODE: 0d00f6-49-00000015 appears.
  This goes after a few clicks of the mouse and the program starts.

  Any ideas how to fix this?
  OS is Windows 7 64 bit my laptop new shinny.

  any help would be great.

  Hello

  You have used the disc is not compatible!
  You should test different DVD from different manufacturers.
  Not all DVDs from different manufacturers are compatible. There are big differences between brands so check and try another DVD

• Satellite L500 - ERROR = copy of splitpart or Canadian Red Cross failed!

  Well, I tried to reinstall vista with the cd/dvd recovery I ordered. I tried both versions 32 and 64 bits on disk, but as soon as it reaches a certain point on disc2 (copy some .swm files 7/9), the error "copy of splitpart or Canadian Red Cross failed!" appears.
  I googled on the CRC errors, but I think I can exclude most of these things such as cable, the scratches on the disc, a.s.o. loose connections unless it has something related to the hard drive... but I could install non - oem vista without any probs, not sure if it's really hard partner.
  I hope someone can help me here.

  Post edited by: babtong

  Hmm maybe you need to format the HARD drive first?
  Clear all all the partitions to format HARD drive and try again the recovery disc may be a few partitions tables start affect installation

  If there is something wrong with the recovery disk and maybe you need to order a replacement

• Satellite L500 - error at startup

  When I start up I get an error message "an error has occurred. Error #-5 "."
  The message invites me to "Visit http://consumer.installshield.com for more information."

  I have visited the site, but have not been able to find the error message that is mentioned and I headed to my software for a solution provider. Can someone give me help to identify the error? At this point, I can say that this error message does not appear when I load Windows 7 on my desktop computer.

  ronswold

  There was the user with the same error, "year error occurred." Error #-5. It's indicator update Installshield that is not important, you can delete just to autostartup in msconfig. It will no longer appear

• Re: Recovery of partition/aid Satellite L500

  I have a Satellite L500/nb, I bought in December.
  I tried to do a system restore and wipe HD the other day and it seems that the recovery partition was corrupted.
  At startup, the system says error: F3-F100-0004 and then stops on 'ok '.

  Can I get the cd of restoration for this system?

  How can I fix it?

  Hello

  If you use a laptop Toshiba EMEA, then you can order the recovery disk to this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Otherwise, you should get in touch with a local ASP (authorized service provider)

  Welcome them

• Satellite L500-12F - error creating Toshiba Recovery disk

  Hello. New user on the forum and the new owner of a Toshiba.

  I am trying to create the 4 recovery disc for my Toshiba satellite L500-12th. Disks 1, 2 & 4 created with success, but 3 disk failed twice. The message I received was on the screen: cannot read the following file: F:backslash ZZImg backslash 09753xsp6.swm error Code: 020150-20-00000000
  (I can't type a backslash in this window of the computer)

  Anyone know of a solution or a similar problem?

  Dwight

  Hi Dwight,.

  The disks that you use to create the Toshiba Recovery disk?

  I have a good experience with Verbatim DVD-R. Have you tried these discs?

• Re: Satellite L500-202 - Bios error! in front of HARD drive

  I have a laptop Toshiba Satellite L500-202.
  I tried to reinstall Win 7 on it, but I can't install it and display an error message from the Bios.

  In the configuration of installation a menu! in front of the HARD drive.
  What is the problem?

  Best regards
  Abbas

  Hello

  Please try to configure the default BIOS by using the F9 key in the BIOS.
  To access the BIOS F2 press immediately after the laptop is turned on.
  Then press f9 and save changes

  I recommend that you test the HARD drive as well... use a tool called 'Test of fitness Drive' for this...

• Satellite L500-21dts - Stop error code during the installation of Windows 7

  Hello

  I bought a laptop Satellite L500-21dts of Saudi Arabia.

  I lost the hd recovery during try windows 7 installation difficulty. If I try to install windows 7, I get the stop error message code 0x0000009c. If I turn sata to AHCI Windows xp sp2, sp3 installed, compitibality but most of the drivers such as display and wlan not installed. To date give BIOS which is not appropriate for the version of phoenix bios 1.5

  I changed the RAM and HD, but the same problem. It may the BIOS?

  Please help me

  Hey Buddy,

  I m a bit confused now... Do you have Windows 7 or Windows XP?

  If you miss some drivers after installing XP, why you update the BIOS?

  As far as I know Satellite L500 is supported by Windows XP if you can download all the missing drivers and tools of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Check this box!

• Satellite L500 - Create System Image - errors on the media

  The Satellite L500 series, I tried 3 times to create an image of C: System with the help of Windows 7, but each time on checking image files created, I got the message "backup Windows found errors on the media while saving a top backup & can not be used for additional backups.

  I tried in Windows to restore from this DVD, but he acknowledged even the backup DVD Win.

  Discs used: Sony DVD - R 16 x, & twice on DVD + RW (4 x), used straight out of the box (no formatting by me).

  Any ideas what I am doing wrong, or if b some into conflict with programs that I use?

  In my opinion, this question is for Microsoft. As far as I know it is the functionality of Windows and the laptop manufacturer has not much to do with it.
  Can you create upward on the second partition of HARD drive or even on external HARD drive?

• Satellite L500-12 q Recovery Disc Creator Error

  Hello

  I have a laptop Satellite L500-12 q. I used the Recovery Disc Creator to make recovery disks. It needs 4 discs. The 1st was writtenk ok, but on the second, towards the end of the current status, it stopped advancing. It's almost an hour, and it is still not finished. I'm on the second try. The disc is spinning and the drive makes noise as if it was written, but it does not advance at all.

  Please, could you help me?

  Thank you
  Claudiu

  Claudiu Hey,.

  What kind of DVD that you use to create the Toshiba recovery disks? I got also some problems to create a recovery disc but I changed DVD + R, DVD-r media and everything was ok! I used Verbatim discs to create because I have really good experience with this kind of discs. In addition, it seems that TDK discs also work quite well. Check this box!

  If it doesn't work check the Toshiba page for an update of the firmware of your WEIRD!

• Satellite L500-1XL - strange Windows 7 error - hardware failure or virus?

  Hi people,

  I am running windows 7 on a Toshiba Satellite L500-1XL.

  About 6 weeks, Windows refuses to load.
  I would get the "Toshiba" screen, then on startup of Windows startup, but then nothing else than a black screen with an icon of the mouse (mobile).

  I could not in safe mode, and Toshiba built in recovery utility would not work.
  "Even using the Toshiba ' product recovery" DVD did nothing, even if the drive was some strange, repetitive clicks for this, so I suspected a faulty hard drive. (Possibly where the MBR has been OK, but the data weren't?)

  In any case, I put in a replacement HARD drive (backups are a wonderful thing BTW!) and DVD recovery charge perfectly and everything seemed fine.

  About 2 weeks later, I had the same problem
  ("Toshiba" Windows startup splash screen, but then nothing but a black screen with a mouse (mobile), no safe mode icon; no recovery utility)

  This time, however the product recovery DVDs worked fine first time.

  Another 2 weeks and the same problem will reoccur; This time, it took another HARD disk for the recovery media to work.

  So my question is, really, what could be causing this anomaly?

  Would it be a virus which is corrupt something that is preventing Windows from loading? And the 'prevention' so that I can not load even the recovery utilities?

  In this case might it also prevent the loading product recovery DVD?

  Or am I looking at an intermittent fault with the connector on the HARD drive that can be either physically damage the drive or at least prevent it from loading?

  I read about the so-called "Windows Black Screen of Death", but I'm sure this isn't that.

  All the advice accepted with gratitude...

  > So my question is really what could be causing this anomaly?
  I doubt it s a virus or something like that, but nothing is impossible.

  In my experience, the data on the HARD drive can be affected by different software.
  In my case, the data on the HARD drive was corrupted, because the 3rd party software changed some files and the master boot record is damaged.
  I formatted the HARD drive and created new partitions.

  I also use the CCleaner and I defragment the HARD disk several times in the week.
  Since the HARD drive and the data are ok and didn t notice such symptoms more.

  Maybe you should try this too

• Satellite L500 - 152 Display driver Sims3 plus

  Hello. I use this thing = [Satellite L500-152 | http://nordic.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?LNG=18&service=ND#tab3;] .
  And it was fine, until I came out and me Sims3 and Sims3 World Adventures, after installing both (+ in order correct ofc +), when I tried to start them up, I can not for the game Launcher, because an error message blocks my way...
  "* There was an error during startup. "Check the log for details."
  No info for don't nabs like me, about the location journal. And when you press the button available only here, the frozen Launcher naturally also closes its doors with her.

  So I checked google and found that people who have had the same problem, just changed the display driver to one that is supported by the game, I discovered that mine was not, I have * "ATI Mobility Radeon HD 4500 Series."

  _Sims3 taken in charge the radeon drivers are: _
  Series ATI Radeon 9500, 9600, 9800, X 300, X 600, X 700, X 800, X 850, X 1300, X 1600, X 1800, X 1900, X 1950, 2400, 2600, 2900, 3450, 3650, 3850, 3870, 4850, 4870, Â Intel® Graphics Media Accelerator (GMA) GMA series 3 Series 4 GMA.

  If someone could help me, by discovering what driver of the foregoing (as appropriate), will work on this laptop and tell me where to download it, I would be very very very happy :)

  Those who changed the driver perhaps no laptop and desktop computers. There is a big difference.
  Support drivers is much better for desktop computers.

  Problem is that the drivers for laptops are slightly adapted and designed for optimal graphic operations.
  I'm afraid that this with updating the graphics driver will be not so easy.
  It is always recommended to use the drivers provided by the manufacturer of the laptop. With the help of some third part and untested graphics card driver may be forced to run on a maximum and there is risk of damage or surprise. So be careful with this stuff.

• Re: Failed to create of the media to restore Satellite L500-1XD

  I have a new Toshiba Satellite L500-1XD. I tried to create the support of recovery twice now and both times he failed on the first two discs with the following error;

  Cannot open the following file.
  E:\Boot\BCD
  (Error Code: F1-02013-00000000)

  I'm using the Toshiba Recovery Media Creator. The operating system is Windows 7 Home Premium 64-bit. I use standard DVD + R 4.7 GB discs.

  Any help would be useful.

  Thank you.

  > I use standard DVD + R 4.7 GB discs.

  I recommend you to use media of high quality like verbatim or Tdk. Voyez_ you, it can cause problems with weak brand, drives.