Netsvc takes a lot of memory and cpu

Similar Questions

• the process Svchost.exe to netsvcs uses a lot of memory (~ 600 MB) and 100% cpu

  I have windows xp edition sp3 family. I hit the power button to hibernate the pc but I think an automatice update was running.  Pc crashes when windows resumes after hibernation. I forced a re-boot, but now the svchost.exe to netsvcs process uses a lot of RAM and CPU. I have a Dell Dimension 8250 with 1 GB of RAM. Svchost uses > 600 MB of memory and 100% of the CPU unless I have stop the DHCP service. When I stop DHCP the svchost stops using CPU and memory affected slowly decreases to about 150 MB and remains at this level. But without DHCP I do have access to the network.

  After installing SP3 recently I started having some weird problems, as I lost my printer and had to re - install the software. Also noticed that after re-booting and desktop appears completely empty, the screen turns white and the taskbar at the bottom will appear empty for about 30 seconds, then reappears. PC seems to be more slow tha before installing SP3.

  I've tried everything. Nothing stopped the svchost to chew all the memory, virtual memory and time processor. Had to re - install windows xp.

• I am unable to stop the hosts of loading process, because it takes a lot of memory

  I am unable to stop the hosts of loading process, because it takes a lot of memory

  Hello

  Some processes have to load, however, you can use these tools to check those and look for ones that
  can use a lot of memory after loading in the Manager of tasks - processes tab - CTRL + SHIFT + ESC
  Check the CPU column.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Allocation of memory and CPU

  Guys,

  My question may sound trivial, but I need it to be clear.
  If I allocate a certain amount of RAM and CPU (without reservation) on some VMS, if virtual machines are not fully allocated amount, is used by other virtual machines.
  I am asking that more I VCOPs reports with a lot of oversized VMs and I also I know I must take measures to reduce the overhead of each virtual machine, I need to know if the memory and CPU are shared dynamically in case of needs of other virtual machines.

  Thanks in advance.

  Daniele

  Short answer Yes, if no reservation is defined, resources are allocated dynamically.  In case of contention, actions values will be used for the allocation of resources.  Virtual machines with lots of unused memory are taxed (income tax slowed) and claimed in a balloon.  The important thing is to know what the VM workload is running, and if VMs are memory aid for the contents of the cache, it is to say sql or exchange and these may consider oversized VMs.  Monitor the virtual machine during the period during the normal business cycle and the size of your virtual machines accordingly.

• ESXi 5.1 - Exchange 2007 - file Page memory and CPU allocation

  I'm currently migrating a class Cluster CSC Exchange 2007 running on vmware on windows 2008, 2003.  It is also a SCC Cluster.  I followed all of the vmware and MS best practices, but not sure of one thing IM is the size of memory and CPU allocation page/swap file.  I have 5 Esxi hosts and each is running only Exchange 2007 comments according to vmware and MS recommendations when you use the Clustering of CSC.

  Each host has 2 CPUs to 6 cores per processor and 48 gb of Ram and that each host will have only a guest, would like to send it to the guest.  I read somewhere that it is recommended this page exchange 2007 memory size + 10 mb file.  Do I really need to get the page to the size of the file?  250 GB of disk space is a lot for swap files! IM also not sure what to set the allocation processor too.  If someone can point me in the right direction, I would be grateful.

  Thank you

  Dave

  Hi dlargeit,

  First of all, off - welcome to the VMTN forums!

  I'm with Josh26 I've ever seen any recommendations indicating that when a CCS cluster virtualization virtual machine by host is taken in charge. It is recommended to keep only a single node SCC by host (which is true for all virtual clusters or technologies like Exchange CSC/CCR/DAG), but there is nothing specific regarding the keep only a single virtual machine by host.

  On the file page, you are actually right on that.  For Exchange 2007, the paging file must be on the amount of memory configured as well as 10 MB to account for overhead costs of the kernel.  It is recommended by Microsoft and it is planned to provide enough space page Exchange should exchange more provide the necessary overhead if meet you a server failure and need to create a complete memory dump.

  You can find this recommendation here: http://technet.microsoft.com/library/aa996719 (EXCHG.80) .aspx

  In terms of CPU allocation, which should really be made according to your individual needs rather than just give all the resources the VM on the ESXi host.  Microsoft lists the maximum recommended for processor resources (Planning Processor Configurations: Exchange 2007 help) and it says that 12 hearts is the maximum for mailbox or Hub Transport box.  Is your really big enough environment need a lot of CPU resources?  Why not start small and increase it if necessary?

  You are in control of your own destiny in some of these configurations.  If you know the recommended page file size is 10 MB of RAM +, do not give the server more RAM is really needed, or you will have to pay for it in the consumed disk space to host the pagefile.  See the guide to memory resources (Planning Memory Configurations: Exchange 2007 help) to understand the maximum rates of memory for Exchange.  You will see that the maximum memory is 32GB, so there are very few reasons to assign all 48GB of RAM on your server, if it can even use.

  In short, the size of the server based on the real needs and I am confident, that you will have a virtualized Exchange system that performs as well as physical.

  Matt

  http://www.thelowercasew.com

• Flash Player 17.0.0.134 high memory and CPU

  Hello

  I can't find any information or solutions to this. From the 17.0.0.134 updated Flash version, it uses a ton of memory and cpu high. I've updated everything (windows, browsers, plug-ins, video... etc) I am on Windows using Firefox 36.0.4(up-dated hier de.0.3) 8.1 and it continues to sky rocket, and then everything slows down and tell me the shockwave plugin broke down and I need to close. In addition, I continue to receive messages from my Norton on the high use of the disc of the flash player: (PLEASE)... can someone help me or at least tell what other people have the same problem.

  Thank you very much!

  Yes, I'm not surprised by the memory.  Farmville may have earned of objects loaded, which gets intensive memory, and then we do a lot of caching and optimization on top of it.  The CPU usage is higher than I'd like, but there is so much crazy stuff goes under the hood of these kinds of games.  Zynga is actually in front of the team of Flash Player in San Francisco, so we spent a lot of time to work with them to build the profilers and adjust their games.

  Honestly, you will get probably better performance in IE - there was a lot of performance tuning for Win8 spent energy, and it does not suffer from either architectural deficiencies in the implementation of Firefox this impact, or performance of the OpenGL performance issue that affects the PPAPI Flash Player at the moment.  We are actively working on both of these problems, so it is hopefully a temporary situation, but two corrections are negligible.

  The ActiveX control also gets a lot of latest Windows compiler optimizations that we use for the Chrome or the plug-in on Firefox NPAPI still.  We will eventually migrate to the latest compilers of Windows for everything, but it's a lot of work.  Switching compilers seems easy, but it's always a very difficult effort when you have a million line code base and more.  I don't think that what you see, it's quite unreasonable as it is really ambitious content, but you will probably get a better experience of IE on the desktop with Stage3D mode such things.

• EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number

  , can not send email - message says may be installed incorrectly and

  EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number

  ox80070002.   What to do

  See www.oehelp.com/OETips.aspx#7 if you use OE and www.oehelp.com/WMUtil/ if you are using Windows Mail in Vista and you use Windows Live Mail, and then ask here: www.windowslivehelp.com

  Steve

• Is it possible to move the \windows\installer folder? The reason why I ask is because it takes a lot of space and I want to move it to another disk with more space.

  The \windows\installer folder takes a lot of space and I want to move it to another drive if possible. Ashwin

  No, I don't think. Just about anything in the Windows directory cannot be moved. You will need to find another way to clear disk space. Try to compress your drive hard (if you don't know how, ask).

• Metadata Windows 7 I tend to take a lot of pictures and I want to be able to add metadata to photos that I know what talking about photography,

  original title: metadata Windows 7

  I tend to take a lot of pictures and I want to be able to add metadata to photos that I know what talking about the picture, where it was taken, the people of marking on the photo, etc. I used the Windows 7 Explorer to add metadata to photos (the pane at the bottom of the Explorer or by doing a right click and using the properties--> details recording here). Everything's all right. But the addition of data to hundreds of photos is a very demanding task. Therefore, I wanted some advice on the following questions before that I seriously undertake this work on thousands of photos:

  1. If I add metadata to photos using the Windows 7 Explorer, and then copy the photos to another computer with Windows XP, I keep all the metadata information that I added in Windows 7 and be able to read in the Explorer of Windows XP? Or will I lose all the metadata as we can add in a specific Windows 7 format, unreadable by Windows XP? Or even that I lost a part of metadata (fields newly added in Windows 7, in case some [which?])?
  2. These metadata will be compatible in the future versions of Windows? If I upgrade to a later version of Windows (whenever it comes out), my metadata laboriously added will be present and readable as well as all the pictures?
  3. Is metadata embedded in the file or is it stored in another table inside the Windows OS? I know this because, to wire different versions of Windows, I have totally lose the metadata when I copy the photos or that it will be present in the Interior photos but will only be unreadable?

  If I lose any of my metadata on different versions of Windows, then this method of recording information of the photo seems unnecessary. If this is the case, can someone advise me the best method to save the details of the photos inside photos so that they are available (and readable), everywhere where the photo is taken or copied.

  Hi mnae,.

  If you add metadata to photos and then to copy the photos to another computer it keeps all the metadata information that you added.

  If you upgrade to a version more recent Windows information will be preserved. Metadata are embedded in the file only.

  I suggest that you first test with some files and check.

• Get-Cluster execution memory and cpu details

  I am writing a script to generate graphs based on average use memory and cpu during the previous month, but I'm doing it for each cluster itself without explicitly naming them. The graphic bit side (I use mschart or googlechart for this) I just need to get the actual statistics and it's the bit that I have a problem with because everything I see with my research pulls the individual information of the VMs or the hosts in the cluster.

  I am looking for two values in each case - the name of the cluster and average use. But the use of the average for the overall Group and not the indivdual VMs.

  I was watching this:

  script of PowerCLI to capture cpu usage statistics & mem

  But that you use hosts.

  I have attached a picture of something that I'm looking, red line on average in percentage and the blue line on average in megabytes. It has been exported from the vcenter however. I'm just trying to save time.

  Thanks in advance

  For a data point average per day, you can simply add -interval 86400 education Get-Stat:

  Get-Stat - entity (Get-Cluster Cluster) - Stat $metrics - start $start - finishing $finish - interval 86400
  Instance of MetricId Timestamp value unit
  --------                ---------                          ----- ----     --------
  CPU.usagemhz.Average 14.05.2014 02:00 MHz 4298
  CPU.usagemhz.Average 13.05.2014 02:00 MHz 4109
  CPU.usagemhz.Average 12.05.2014 02:00 MHz 4163
  CPU.usage.Average 14.05.2014 02:00 10,74% *.
  CPU.usage.Average 13.05.2014 02:00 10,27% *.
  CPU.usage.Average 12.05.2014 02:00 10,41% *.

  Note that it may not include the values of the last day, since the rollup database for daily statistics task has not yet executed.

• Reservations of memory and CPU

  Simple question please: a virtual machine must be powered turn off/on when implementing a reserve of memory and cpu? I know kernel certainly used swap file automatically disappear when the virtual machine is running and a reserve of memory - at least I do not.

  Thank you!

  If the answer is correct please mark the issue how responded.

  Thank you

• Application Builder takes a lot of time and the Popup messages during construction

  Hi all

  My request is slightly larger with over 300 of VI. Between the build process that I receive pop-up messages requesting files from the library GMath etc... are changes u want to save the files... ? When you click on OK button it starts to save these files of the library and when he saves nearly half the number of files in the grave application builder fails and causes LabVIEW close. As the build process takes more than 2 hours and the final result is always a unsuccessful construction due to the accident of application builder I am wasting my time.

  Kind regards

  Pavan

  Here's what I'd do:

  • Open the main VI
  • Press Ctrl + Shift + Run to recompile all the screws in memory
  • Wait until the end
  • Save all the

  If there is, repeat for each dynamic called screw

• HP 550: updated hp 550 memory and cpu with the unconventional settings. is not ideal, but not other choice

  HI guys, I hope you can help or at least give a point in the right direction. I am a freelance photographer with a large part of the suite creative Adobe CS6. After a disaster of a week, I came home to find the motherboard on my editing station is fried somehow. I don't know what happened though I wouldn't put past my inattention of roommates.
  I'm desperate. I have to finish my current job until I'm able to afford to buy a replacement. So I have to rely on stop-gap measures, in desperation to finish my project, that are less than ideal, but so far are doing better than I'd hoped.
  Im a photographer, Capture One, Adobe Photoshop Lightroom, Adobe Photoshop and Premiere Pro are the go for workaholic applications that I need to work. without them I have no income. in order to have this machine run these applications,
  the machine I have left is an old hp 550 that was gathering dust in the closet. It was built for 32 bit Win XP and in no case is designed to run adobe products food pork I use, particularly of Lightroom.
  Unfortunately PS with Lightroom and first are 64-bit programs and LR and first are hyper threaded. so I did some research and with the help of the list of the utility windows 7 Advisor to upgrade instructions, I was able to get windows 7 Pro 64-bit to install and run.

  I know that this is not the ideal machine or the situation, but for a few weeks, I need to make it work.

  I really just 2 simple questions. First of all, I went to the HP technical support. but they were not useful. as the guarantee of the laptop are long gone, they would be not even polite and basically told me to shove off. Then on another forum, I called back and comes with a knowledge it all who constantly insisted on the fact that there was no way no how this pc could run 64 bit win 7, which i thought what am I seeing things? It works very well for 3 months. So I decided to come to you. your forums were useful on many occasions.

  Basically, I need this machine to run these programs during the next month or two, until I can buy a new machine.

  essentially, what I want to know, it's the motherboard support an upgrade of the processor? and if anything goes, what do you suggest as a substitute, given my needs? The Core 2 duo is the bare minimum of what I can limp with like photo/video rendering times are excessively slow.

  then I was talking to the support staff essential tech upgraded memory. and possibly set the bios to force to run 8 gigs of ram. They said that they have cold cannot find any version of bios that would make that possible, but only by forcing already run 64 bit, which has already allowed the pc to use the full 4 GB of ram, which was impossible in the 32-bit format. He suggested that I buy 2 4 gig modules such as 4 GB DDR2 PC2-5300 unbuffered NON - ECC, 1.8V 512Meg x 64 which can be seen at http://www.crucial.com/usa/en/memory/ct51264ac667 and try to install the full 8 concerts and see what would happen, saying that he had a feeling that I might get lucky. his logic is that the 64-bit system already open the ram limits and who knows, you can't make an omelet without cracking of eggshells! It seemed very optimistic. So, what do you think? It seems likely you because I love to work. or do you think the guy was a quack? and this whole endeaver is a waste of time and money?

  also, any other suggestions on how to time this month long storm that do not involve suggestions of buying new machines would be appreciated!

  so that you have accurate details below are my system specs.

  Hewlett-Packard HP 550 F05
  System serial number: CNU90716GN
  Inventory number: CNU90716GN
  Chassis serial number: CNU90716GN
  Case type: portable

  Windows 7 Professional (x 64) Service Pack 1 (build 7601)
  Install language: English (United States)
  Local system: English (United States)
  Installed: 04/08/2014-18:21:11
  Start mode: BIOS (Secure Boot not supported)

  Processor and b main circuit
  1.80 GHz Intel Core2 Duo processor
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached
  64-bit ready
  Multi-core (2 total)
  Not hyper-threaded Board: Hewlett - Packard 3618 KBC Version xx.xx
  The bus clock: 200 MHz
  BIOS: Hewlett-Packard 68MVU worm. F05 19/01/2009

  Readers of memory Modules c and d
  2320.47 GB drive hard usable capacity
  959.16 gigabytes of free disk space

  HL-DT-ST DVDRAM GSA - T50L ATA Device [scanner]

  Hitachi HTS543216L9A300 [hard drive] (160,04 GB) - drive 0, s/n 090108FB0200VCCPYM3B, rev FB2OC40F, SMART location: healthy
  ST1000LM 024 HN-M101MBB USB Device [hard drive] (1000,20 GB) - drive 3
  ST310005 USB Device [hard drive] 28as - 1 player
  WD 1600JS external USB Device [hard drive] (160,04 GB) - disc 2, s/n WD - WCANM2342148 4088 usable MB installed memory

  Slot ' DIMM #1' has 2048 MB (serial number 0000202 A).
  Slot ' DIMM #2' has 2048 MB (serial number 00004042).

  Thank you friends! I can't wait to read your tips!

  Jodie

  Here is the Manual:

  Repair manuals

  Unfortunately, the maximum configuration is a processor T5670 1.8 ghz and 4 GB of DDR2-667 memory, you already have. The CPU includes the 64-bit instructions is not surprising, that it can run Windows 7 64-bit. My best advice is to save your money for when you can get a real working machine. The only other likely to help is a solid state drive, you might use in the laptop and then also use the new computer that you intend to buy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Windows.exe gobbling up memory and CPU often CPU ranges between 50 and 100%.

  Hello

  My PC recently turned very, very slowly and often unresponsive.  When I bring up the Task Manager, on the processes tab, I see that Windows.exe uses as much as 1 million K of memory and often the CPU ranges between 50 and 100%.  What is happening while no application works.  I have also noticed that in the Task Manager, there are two processes with the name of the image of windows.exe and consuming all the power and memory has no user name.  When I try to end the process on this one it still won't let me and a message appears saying that I don't have permission to do this, or something to that effect.  I am however able to stop other processes including the windows.exe with my username process.  The cases where it allows me to stop the process, performance improves, but given a little time, again with nothing running, it starts again. Thinking it was a virus, I missed the live update on Norton and performed a full scan, but nothing found.   I also tried Windows defender, but in vain.  Any help on this problem is greatly appreciated.

  Thank you

  Nelms of Yelm

  From what I found, Windows.exe is likely malware:

  Windows.exe file information

• Of MacBook apps take a lot of memory

  I'm on MacBook Pro (retina, 15-inch) 2.3 GHz Intel Core i7 OS X El Captian 10.11.5.

  I noticed that my Apps used 121,45 GB of my SSD. How can I check that either the app uses the most memory and how to uninstall?

  

  It's a misreading which is corrected only when you re - index the SSD: Spotlight - how to re - index folders or volumes - Apple Support. You must ignore it. To get reliable information, select the icon on the desktop of your SSD; Press command-I to open the read information; in the top panel, you will see the disc information: capacity available and used. That's all you really need to know.

  1. See where my disk space gone?.
  2. Remember to empty the Recycle Bin to reclaim space.
  3. Use OmniDiskSweeper or GrandPerspective to search large files and find where they are.