Network adapter missing Medion/Vista

Similar Questions

• network adapter missing e9150t

  My system works fine this morning - but then the network stop job.  This system is connected through a router to the ethernet adapter in the PC.  I have a second PC connected wireless through the router and it works fine.

  On the PC with the problem, Diagnostics in WIndows 7 said that it lacked the network adapter. When I looked in the device driver - the network adapter is missing. I called Norton to see if a virus has caused the problem, but they said they didn't know any problems. I tried restoring the system and supported the system a few days ago, when the system has worked very well - same problem.  I searched on the HP support site - but don't see no driver to download to restore the network card which must have become invalid or corrupted somehow.  Anyone any ideas how to fix this problem?

  Hello:

  I don't know if this will work, but here are the network drivers you need for your PC. You should see the controller ethernet with an exclamation indicating it is present, but there is a driver problem.

  Select the 32 or 64-bit download as applicable to your system.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18713&lang=eng&OSVersion=Windows%207 * & DownloadType = drivers

  If you do not see the device at all... Although opens a whole new can of worms. It could be that the network adapter to the top and dies on you.

  In this case, you will have to go to plan B and buy an external USB RJ45 network adapter or internal network PCIe x 1 adapter.

  Paul

• Network adapter missing after installation of Windows 7 Ultimate on my PC

  Hello world

  My computer's CPU is Intel Core i3-2120 3.3 MHz.

  After you have installed Windows 7 Ultimate, I tried to connect to the LAN, but I found that I had no LAN driver.  So I downloaded the driver from the Intel site. I tried to install the lan driver but I get a message that is no network card. I tried some different things but nothing seems to work.

  Hi Nitin,

  Thank you for visiting Microsoft Community.

  According to the issue description network adapter is missing after I installed Windows 7 Ultimate on your computer. The network adapter might need to be reset, or the driver for the card may need to be updated. Try these steps and see if it helps you to solve the problem.

  Method 1:

  First of all, I suggest you run Windows built-in network troubleshooting to get the problem automatically detected and corrected.

  See the article below to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7#section_2

  
  

  Method 2:

  This problem can also be bound to the adapter, reset, update driver, disabling, re-activating, uninstall and reinstall network adapter can help.

  Follow the steps in the following article to troubleshoot network adapter.

  How can I troubleshoot network adapter?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  See also: Wired and wireless network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• HP Pavilion Sleekbook 14-b030tx NETWORK ADAPTER MISSING

  Hello

  Please could you help me. My netowrk adapter disappeared due to the installation of windows 7 Ultimate version. Previously, my laptop came with the version of windows 8.

  And now, my drivers are missing. Even with the USB ports. Its not detecting. I was uinable to find the drivers on HP wensite official .iIts available only for windows 8. could you please help me with the links.

  In the network controller hardware ID: PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  Hello:

  You need this driver for the wireless...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

  Bluetooth driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130390-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0011

  This driver should work for the USB3...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118604_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Pavilion Elite HPE: Network adapter missing?

  Greetings. My Pavilion Elite HPE is about 2-3 years of age. Recently, he has crashed hard and does not work. I was able to reinstall Windows 7, but I lost all my data and programs. Now, the computer works, but cannot connect to the internet. HP said to contact Microsoft and Microsoft told to contact HP. Then Microsoft recalled and said tell HP computer model number and they can tell you which network card is necessary. Then I can download? Not sure if I need to hardware, software, drivers, etc.. Help, please!

  OK, try this. Apologies, I took a guess, but I didn't know that you don't have another PC in the House. If it wasn't that, I was hoping that you can upload to another PC and try the others. It must be one of these two (probably the first):

  Original Atheros Wireless Networking Controller Driver 8.0.0.316 Rev a 31.7 MB 22 November 2012 download terms of use details HP

  Original Realtek Networking Controller Driver 7.26.902.2010 Rev a 1.7 MB 10 June 2013 download terms of use details HP

  Pretty sure that the second one is for your ethernet port. You want to install this one too, if you think you'll connect at any time directly to a router via the ethernet adapter.

• Pavilion G6 network adapter missing

  After a reformat recent, the NIC in my G6 Pavilion no longer works and I can not connect to the internet. I have a real problem find adapters and get them to work.

  After some research, I have the following characteristics that may be useful

  Operating system: Windows 7 64-bit

  Model number: 1b61ca

  Network card: Atheros AR9285 802.11b/g/n WiFi Adapter

  Ethernet card: Ethernet Controller (cannot find a lot more information apart from this: http://www.driveridentifier.com/scan/driver_file_detail.php?inf_file_id=1022408&md5=d8756e3ed71839c5...)

  Thanks for your help!

  Hello Firengineer,

  You can use another computer and download it, or you can order the CD from recovery here: http://goo.gl/jTht6 in the section "Support of restoration of order." This will give you all the drivers and the original OS.

  You can also call and order. Call 800-474-6836 and follow the prompts.

  Please let me know if it solves your problem. Good luck!

• Dell Inspiron 15R 5537: Intel Network Adapter missing

  My hard drive on my Inspiron crashed and I replaced the hard drive and reinstalled the OS disk, but my wireless network card is missing.  I was wondering what I need to do to get it back to use wireless? I can use it through the ethernet connection, but want to restore my wireless connection. I recently bought a program that use a USB card to recover to wireless, but I want to be able to use my computer again without going through the USB port. Where can I get a recovery disk to reinstall my network card that is missing? It is a N-7260 of Intel.

  Any suggestion would be appreciated.

  Hello:

  There is the problem...

  You don't have a 7260 Intel wireless card, but a wireless card Dell 1705 wireless 802.11b/g/n, made by Atheros.

  You must download and install the first wireless driver listed on the page of the driver and support for your laptop.

  Who will also install the bluetooth driver too.

  Dell Wireless WLAN 802.11b/g/n, Bluetooth4.0 1705/1703 + HS driver

                

• Laptops Dell Studio 1555 network adapter in Vista problem

  I work with Dell Studio 1555 laptop computers that have Windows Vista Home Premium on them.  I had to reinstall Vista and drivers.  Now that it's all over I can't the laptop to connect to wireless internet.  I get the below error message:

  This computer does not have an installed and configured wireless network adapter...

  what Miss me?  some services to market?

  any suggestions would be greatly appreciated?

  Thank you!

  http://support.Dell.com/support/downloads/index.aspx

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up.

  cable not connected network adapter

  I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!

  Hello

  1. Once you get the error message?

  2. do you get the error when you try to disable Norton anti-virus?

  3. are you able to access the Internet explore?

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Network adapter and the driver of the mini missing hp!

  Network adapter and the driver of the mini missing hp!

  I have a new computer, hp mini 210 and had to get windows 7 on it hard. Then I played the cd on it Windows 7 Home Premium, and there is no wlan more! He's now getting WARNING pilots are missing when I try to install it, it's the: no available network card what do I do?

  Netzwerk und Treiber von hp adapter mini there!

  I have a new hp mini 210 bekommen und windows 7 starrer is had. Dann habe ich windows 7 home Premium uber die cd is yet und're fand kein wlan mehr! ES kommt nun immer die Warnung Treiber wenn ich installieren is die there will be steht is: keine netzwerkadapter available was soll ich tun?

  Hello:

  Here is the link for the drivers you need for this card...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Changing the settings of the WLAN with an Atheros AR5007EG Wireless Network Adapter running on a Vista computer

  How can I set the preset wlan on ONE for an Atheros AR5007EG Wireless Network Adapter running on a Vista computer.  Currently, the default is OFF and I need to use the Fn F1 to bring up the option to turn it on, Iwant my laptop to connect to my wireless router automatically without having to do that.

  Thank you

  Hi Cath.

  In most cases, it is a configuration in the BIOS of the laptop that will solve the wireless by card.

  Then start the laptop enter in BIOS and look for an entry that configure the wireless to be all the time card.

  Where necessary the manual or computer support site must have the necessary info.

• I am currently using Windows Vista 64-bit and every so often Vista shows that this network adapter is spent in local mode.

  I am currently using windows vista 64-bit and every so often vista shows that this network adapter is spent in local mode

  I did several tests, including
  ping google.com
  to test if it is online and this proves that when its premises in sound mode now online
  I also entered the adpaper of netowrking and disabled so that nothing can turn it off energy saving
  my antivirus is AVG
  AND use zonealarm as my firewall program Please note even with disabled zonelarm it still happens
  can anyone help
  ?
  original title: network adapter shows onffline but it is online

  Hello

  You can try to uninstall and reinstall the network adapter.

  To do this follow these steps:

  1. click on Start, in the Start Search bar type device manager and press enter.

  2. in the list of devices, right-click of the network adapter, and then click on uninstall, if she invites you to completely remove the driver files, click ok to delete.

  3 restart the computer once the uninstall is complete.

  4. after the computer restarts, it will automatically detect and install the drivers.

  5. check if the problem is resolved.

• Windows Vista Home Premium Service Pack 2 upgrade of the Atheros AR5007EG wireless network adapter

  I just bought a new device Sierra Wireless mobile hotspot, the Pro of the Sprint Overdrive.  The wifi connection works very well in my PC with the exception of a PC set that I am running Windows Vista Home Premium Service Pack two.  I am told that the problem is with Vista and the Atheros AR5007EG wireless network adapter.  The current version is 7.6.0.164 and it tells me the device Overdrive only with version 9.1.0.328 or higher will.  What I can, and if I can, how to move the driver to the required version?

  Hello

  You can try to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET