network and wireless ethernet card problem

Similar Questions

• HP g60-634 both ethernet and wireless net card does not.

  Wireless Ethernet adapter and the two works do not. WiFi adapters attaches to, Router 2 wire network at home but seems to get any ipaddress. Watch yellow exclamation on wifi adapter in the taskbar. Nothing seems to help. Downloaded sp 54792.exe installed to no success. has tried a restore to an earlier date without success to any restore point.

  It was great. I worked on the routers since the dawn of the DSL and IPTV, a simple restart of the wireless service was not good enough.

  A reset of the entire system had to be forced, & I mean reset power off reset, software not only controlled. (This hard reset briefly freezes the stream IPTV... just an info for anyone else is Alcatel 2Wire broadband). But with the new drivers installed, I'm connected wireless once more.

  You have helped to solve a weekend long anomaly and a possible divorce. My hat is off to you.

  TNX Ricco

• No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

  I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

  Deactivation and reactivation of these two connections: FAIL.

  "Diagnose and repair" on the two connections: FAIL.

  Under dynamic I.P. type to static/static to the dynamic: FAIL.

  Uninstalled all network via Device Manager devices, then restart: FAIL.

  Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

  The command ipconfig/all text follows:

  ----------------------------------------------
  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Brooklyn's>ipconfig/all

  Windows IP configuration

  Name of the host...: Brooklyns-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-21-5C-31-87-95
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-4E-2E-F7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
  B4B}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
  0FA}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Brooklyn's >
  --------------------------------------------------

  Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

  I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

• Unable to connect to the network and wireless interface does not appear in ipconfig/all on Vista32

  My niece has a laptop of HP under vista32 who cannot access the network wirelessly or wired.  She is in College and needs the laptop on the network as soon as possible for his class work.  I tried to reload the driver wireless driver (Atheros AR5007 b/g) and reset the tcp/ip stack using the command netsh addressed in the microsoft article, but nothing works.

  I brought the laptop to work where we have an unsecured wireless lan (called comments) for visitors and the laptop can go out and find all points of access wireless including comments.  When I select the comments and try to connect it times out and tells me to watch driver and tcp/ip connections.

  Another clue may be that the wireless card does not appear when I type ' ipconfig/all', or the adapter wireless and wired adapters are not displayed:

  C:\Users\Admin>ipconfig/all

  Windows IP configuration

  Name of the host...: Hannah-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  Physical address.... : 00-21-86-39-EE-22
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  C:\Users\Admin >

  I'd appreciate any help I can get.

  Thank you!

  In the case where somone has this same question, I wanted to post my final resolution of the problem. I backed up its data and restored the laptop to factory default using HP restore and now everything works fine.  Better I would say loading Zone Alarm on Vista was a bad thing for my niece to do.  Would have been nice to find a magical solution to avoid restoring but never found one.  Even after the alarm zone using their instructions by removing completely, there was apparently a problem with the registry who wouldn't let networks are working properly.  One thing I noticed after that the restoration was the HP Wireless Assistant poped up and told me about available networks, etc.  Assistant wireless didn't pop-up at all whne the cell was dismantled so maybe assistant was broken?  Well, I'm out...

• Office jet pro 8600 more: Office jet pro 8600 not available in wired networks and wireless

  Have a 8600 JO Plus (CM750A) (N911G), he worked on the wired connection with a static IP address. Then one day she stopped communicating on the cable network. Don't reset to the default values, but still no connection, no activity lights on the connection on the printer's ethernet port. Configure to use the wireless connection. He worked for a while, and then he stopped too much work, could not see it on the wireless network. Reset to the factory settings, yet could not set the wireless connection. She see the SSID of the wireless and allow to enter the password, but would not connect to the wireless network. Now cable and wireless connectivity will not work. I think that the network adapter is broken. What is the OPINION of the Committee of the network so I can order a new one? Connected to USB at the moment and may have a printing station. So OK for now but need a new Board of Directors network. Or any other suggestions on how to connect to wired or wireless. I set factory defaults may times and set a static wired network IP address (which does not stick).

  Hey @John-G1,.

  Welcome to the Forums of HP Support!

  I understand that you are looking for a replacement of the network card for your Officejet 8600 Plus e-All-In-One Printer. It is not a replaceable part. However, if you contact HP support by clicking on this link you can discuss options based on your printer warranty.

  If you appreciate my help, please click on the thumbs up icon. If phone support is able to provide you with any resolution, click on accept solution. The two icons are located below this post.

• Ethernet card problem

  Hello

  I have a problem. I don't see my network card settings. Ethernet cable works, I try another PC. But this pc does not see the card settings. That the ethernet card will be lost, I think. I just ask; Operating system problem or hardware problem, I don't know. How do I test it?

  (Please, don't see my English grammar is not good, I know)

  How to apply the best question

• Bluetooth network and Internet connection sharing problem

  I am putting in place a network via Bluetooth between two computers later with Toshiba Stack installed and to share the Internet connection with the second computer.

  On the computer of trees I put Internet connection sharing, and for this reason, it automatically assigns addresses TCP/IP for the Bluetooth Personal Area network (192.168.0.1).
  On computer 2, I put everything to get it automatically. Firewall (Kaspersky) disabled.

  When I connect 2 Bluetooth devices, everything looks fine, the 2nd automatically gets the IP address, I can ping both computers and Internet works also on the 2nd computer, for a few seconds! After that, it appears as the 2nd computer is disconnected from the network... what could be the problem?

  In the case of the observer under the System tab, I found information like these:
  2nd comp:
  The system has detected that the network \DEVICE\TCPIP_{E44D18EB-91F5-4 adapter has been connected to the network and launched a normal operation via the network card.

  The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.

  and the 1st model also appears this:
  The system has detected that the network Bluetooth adapter... Area Network - Packet Scheduler Miniport has been disconnected from the network, and the network adapter configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

  In your case, I would look at the following Web site:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists the following document:
  "Internet on PDA via PAN using Notepad as a gateway."
  In your case, the PDA is another laptop, but the procedure should be very similar.
  I would check the firewall settings later if it still does not work.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• How to configure a multihomed in Windows 7, wired network and wireless networks at the same time?

  Hello

  I have a fixed computer Windows 7, I need to configure for the use of wire and wireless networks.

  On the phone we transfer vast amounts of data, astronomy cameras than only products of 20 to 30 seconds, space images 3-4 GB each. The cameras are connected to the top of a tower, which in turn is connected via a 45 feet cable CAT-5 to the search engine.

  Internet access requires a wireless network connection.

  These two connections work - separately. I have to disable an and activate the other to pass. This jump back and foth is obviously a bit inconvenient.

  How to configure Windows 7 to manage both types of networks at the same time? On another forum I learned this kind of configuration is called multihoming, and it's something difficult to achieve.

  Having studied more about it, there is another possible solution called Internet connection sharing. that may be easier. I haven't used this option for years (since the routers were introduced) but is still active.

  Disable DHCP on the Dovado or use a cable between the PC and the laptop.

  Turn on the wireless on the PC and make sure that you have an internet connection. Disable wireless on the laptop. Connect the PC's LAN ports and laptop (via router or a cable crossover).

  IN the network of PCs and next to the connections Sharing Center, you must have 2 Ethernet and WiFi options. Double click on WiFi, then on the next screen, click Properties.

  The second tab in the next screen is sharing, check allow other users of the network to connect and then OK.

  Define the IP addresses for PC and laptop as in my previous post, but this time on the laptop set the default gateway to the IP address of the Wired of the PC port, the 1st DNS to the address of the Huawei and value of secondary school who suggested for your ISP.

  This affects your PC to access wireless internet and allows the laptop to access the internet via the PC

  Basic information about ICS are HERE

  Manuals for the Dovado HERE

• Satellite A300-1NO - Player cards and SD memory card problem

  Hello!

  There are a few problems with the card reader built into my A300 1NO. If I put an SD (SD or SDHC) inside, he wants to recognize the cards as the XD memory cards. In Device Manager window is therefore a "Ricoh xD-Picture Card Disk Device" listed here, with a yellow exclamation point, and the card is not at all as by car.
  With Memory Sticks, there is no problem, the player manages them almost without problem.

  I tried reinstalling the drivers by running the installation program "Ricoh Card Reader", which is downloadable from the toshiba site, but it did not help.

  So what's next?

  Hello!

  Did you remove the old driver before installing a more recent?
  And you can format the SD card using the Toshiba SD memory?

  Normally, the card reader must be able to read SD and SDHC cards too. Have you tried the cards from different manufacturers?
  I use the SanDisk Extreme III cards, and don t have problem with these cards.

  Good bye

• HP Pavilion g7-2004sd suitable for implementing SSD caching and upgrade ethernet card

  I intend to buy the laptop mentioned above, which comes with a 750 GB (5400 RPM) HDD, Windows 7 64-bit operating system.

  To make programs run faster, I want to do an upgrade of SSD with the Intel SSD 313 caching.

  The store where I buy the laptop does not support this, but I was told that the standard HP warranty is not null when done elsewhere. My question what is the best choice for caching, for example 20 GB (by the Intel SSD 313) or by implementing caching of Corsair SSD 60 GB, assuming that, on the motherboard, there is a space for installation of the caching.

  Is it also possible to upgrade the ethernet card and replace the default map with this one:

  Intel WiFi 300Mbps (6235 N) + Bluetooth 2.1, 2, 1 + EDR, 3.0, 3.0 + HS, 4.0 (WHEAT) (dual 2.4 Ghz & 5.0 Ghz band)

  to make the WiFi works best when more than one user.

  To be honest, I'm not sure that this system will support the caching of the WSSD.  Pagedownload of systems that caching of the WSSD to support have usually a driver Intel RST available under chipset on the software and drivers.  This feature is generally reserved for the final product lines more high as ultrabooks and some Envy laptops.

  Page 41 of this guide lists the available wlan modules that will work in this book.  If it is not in this list and was not ordered to HP, then the wlan card will not work.

  To be honest, looks like a Ultrabook as is this a more of what you are looking for because it comes with a cache of WSSD drive.  It does not list the technical details, but it appears when the customization of the laptop and it is not removable during the configuration of the laptop.

• For wired network and wireless EAP process

  Hello

  I am confused with the EAP process when compared between wired and wireless. As far as I understand that EAP working if wired authentication of 802. 1 x, the client must have an IP address on this subject in advance. In other words, EAP process cannot start without the IP address on the wired client. For the same reason no doubt allow us DHCP traffic switch low impact.

  But when it comes to wireless it looks that the EAP process can function without an address IP is required on the wireless client. My understanding is correct? If Yes, how can EAP process of progress without an IP address on the client because there might be a scenario this RADIUS/ISE server can be available to the client on a network of layer 3 for authentication 802. 1 x.

  Thanks in advance for clarifying this confusion. I'd appreciate also all link to a good document that covers this concept.

  Kind regards

  Quesnel

  EAPOL traffic between switch and host is not on IP and runs before DHCP.

• T430 - (eventually dislodged) network/ethernet card problem?

  I have an ethernet connection that suddenly cut yesterday; my laptop does not recognize that there is an ethernet cable connected to it. He did once before, but mysteriously dressed himself. No chance now. The network light does not appear when I plug the ethernet cable, but I checked (by plugging in another laptop) who works in the internet and the cable is fine. Which indicates that the problem lies with the network adapter.

  I suspect the network card (or whatever the thing you plug the ethernet cable) is filed incorrectly, such that it does not recognize that the cable is plugged in, even if it isn't a very informed opinion. Nothing shows up on a scan or network hardware diagnostics, and I can always get wifi; the map itself seems to work, but for the connection. Disabled/re-enabled network card, so I'm suspecting it's a physical connection problem. In addition, both times where my ethernet connection has stopped working, it was immediately after I came home from uni, with my laptop having had the opportunity to wiggle around in my bag. All this comes after my laptop received a slight bump and some minor visible body damage (although all the NIC has worked perfectly fine).

  Are there measures suggested to take to solve this problem, or ideas on what exactly is the problem?

  There is no card. Connectors and circuits are part of the motherboard. You have a guarantee, although if there is physical damage in this area, it will probably not be covered without cover against accidental damage?

• Controller network and wireless problems

  Greetings,

  I spent many hours trying to solve this problem myself. I finally managed to get all my drivers except for 1. I have a laptop HP Pavilion (EX177AV), and due to a virus I had to restore my laptop. I had no restore disc, so I had to find all the drivers and do some trial and error.

  The only rider that I can't find my network controller is. I'm also unable to get my wireless to knit (other than Bluetooth).

  Help, please!

  I am running Windows XP Home Edition

  Here is my Instance ID of device: PCI VEN_8086 & DEV_4222 & SUBSYS_135B103C & REV_02\4 & 38B5BDF7 & 0 & 00E2

  Thank you very much!

  Too bad

  I took this Instance of the device and did a search on google and found. (Learned something tonight)

  Thanks anyway!

• Adapter network and wireless problems

  I have problems to connect to internet with my wireless, the internet works wired but for some reason not wireless. I uninstalled and reinstalled nothing doesn't.

  I also see in Device Manager that the "#2 microsoft tun miniport adapter" adapter has a yellow triangle next to him.

  I'm running a dell inspiron 1525 with vista home premium edition

  Please can someone help me.

  thanking you in advance

  Hello

  First of all,

  Make sure it is turned on. There may be a switch on the front to turn wireless on or off. Then I'd go to the Dell site and download the latest Vista drivers for your 1525.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=555&l=en&s=biz&OS=WLH&OSL=en&CATID=&impid=&SystemID=INS_PNT_PM_1525

  If you still have a yellow Triangle next to the device, double-click it to open the properties and see what he says in the device status area. Please let us know.

  I can't wait to hear back from your

  Mark <> Microsoft Partner