Network error configure when Datasource in planning 9.3.1 - URGENT

Similar Questions

• Unsuccessful logon. Look for the details error log when loggin in Planning

  Hello
  
  Hope someone can help with a problem that has happened recently. I get the following message when you try to connect to Hyperion Planning: -.
  
  "Unsuccessful logon. Check the log for details"
  
  What happened to our instance of development only, which has recently been improved 9.3.1 to 9.3.3. It's only a matter of planning, I can connect to shared services, EAS & workspace by using the same credentials.
  
  After the upgrade to 9.3.3 we were able to connect to schedule and use the system, so I'm not sure that the upgrade was the cause. I tried to launch the configuration utility that has had no effect and also tried searching online, nothing helps.
  
  Has anyone seen similar problems or nobody knows what logs the error means that there is no error message in the planning log?
  
  Thank you
  
  Stephen

  Here's your number

  Cannot create the JDBC connection. java.sql.SQLException: [Hyperion] [Oracle JDBC Driver] [Oracle] ORA-01017: name of user and password invalid. connection refused

  The details of the source of data is incorrect, you must change the data source and enter the name of user and password correct

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Internet Backgammon no work, receive error message: "a network error occurred during communication with the game server.

  Original title: All of a sudden internet backgammon works not

  Just your portable Windows 7 computer base. Everything worked well. Started playing internet backgammon... has won EACH game Yes! Took a break for an hour or so... came back and now have message saying a problem to connect to the internet game server.  Someone knows what's the problem?  What it says is specifically "a network error occurred when communicating with the game server". That the devil which means?

  Hello

   

  1. what browser do you use?

  2 are you facing the same issue with other games like asset stings on the internet?

  I suggest you follow these methods and check.

  Method 1: You can check if the problem appears in a clean boot state.

  Refer to this link: http://support.microsoft.com/kb/929135

  If the problem is solved, check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Temporarily disable the security software and check if the game works very well.

  Refer to this link: turn off the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 3: If the previous step fails, temporarily disable the Windows Firewall and check if the game works very well.

  Refer to this link: turn enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: After checking the functionality enable the Windows Firewall.
   

  I hope this helps!

• Network error [10053]: can not send data when you run a calc in Planning

  Hi gurus,

  I get a network error [10053]: can not send data when you run a calc in a planning application.

  Looking in the newspaper of the App in Essbase server, I found the following:

  [Thu Apr 9 15:37:36 2014] Local/MYAPP / / / 140285871445760/Info (1008108)

  Internal logic error Essbase [1]

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008106)

  Exception error log [/Essbase/oracle/Middleware/user_projects/epmsystem1/diagnostic/newspapers/essbase/essbase/app/MYAPPlog00004.xcp] is being created...

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008153)

  A core file can be generated in [/Essbase/oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/app/MYAPP/ESSSVR.] Wed_Apr__9_15_37_02_2014]

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008107)

  Exception error log completedmyapp/Essbase/oracle/Middleware/user_projects/epmsystem1/diagnostics/log/essbase/essbase/app/MYAPPlog00004.xcp please contact technical support and provide them with this file

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1002089)

  RECEIVED COMMAND OF THE UNUSUAL STOP - REQUEST FOR TERMINATION

  My environment is Windows 2008 R2 with Oracle Database and having only Essbase server in a SUSE LINUX box.

  Could someone help me on this?

  Thanks in advance

  We've tracked down the instructions in the calc and the error occurs in two blocks of calc. After the split in two blocks of the calc has no error more.

  Thanks to you all

• Cisco ACS SE "set ip" error: could not set up new NETWORK card configuration.

  Hello

  I get the error "error: could not set up new NETWORK card configuration." When I try to set the IP ACS SE.

  When I called into the device image and tried to do an initial installation, the IP to not hold after the restart and went back to the default value.

  I went by NetPro and apparently it is a common problem. One person it is solved re-imaging unit, but who has not worked for me.

  Someone there with a solid solution? I use NIC 1 FYI.

  EDD.

  Ed,

  Please make sure that if ACS is associated with active before setting Ethernet connection

  or change the IP address of your ACS system engineer.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.0/installation/guide/appliance/admap.html#wp1109621

  Kind regards

  ~ JG

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Error 0x800704b3 when you try to map a network drive

  Hello

  I have the following error message when you try to map a network drive in my home network:
  "\\iomegahmd cannot be reached" and the error code is 0x800704b3.

  I already looked in the services, and my strong assumption is that the problem is that 'TCP/IP NetBIOS Assistance' service is not statrted and it is disabled. When I try to start it, there is an error message:
  "The system could not find the specified path".

  I also checked the dependency of the 'TCP/IP NetBIOS Assistance' service components:
  Auxiliary function for Winsock driver
  NetBT
  TCP/IP protocol driver
  NetIO-legacy-TDI Support driver
  in the Device Manager is running, but they are all running. Startup is set to 'system '.

  Under the properties of version 4 of TCP/IP Internet of the wireless device, under Advanced-> WINS I ve put enable NetBIOS over TCP/IP, but it helps t is not either.

  What else could try, so that I can map network drives?

  I should also mention, that the problem persists for a few weeks. Before, it was working properly. In addition, on other computers on my network I don't have access to the same network drive problem.

  Thanks in advance,
  Tithe

  > I should also mention that the problem persists for a few weeks. Before, it was working properly.

  It of difficult to say what's wrong in your case. My first idea is: put installation beginning point of time before this error appeared.

  I recommend also to disable all security software and check if you experience the same problem.
  If you still experience the problem, then follow the link to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• I get my connection wizard of wireless network to work when I get the RunDLL error "an exception occurred while trying to run"wzcdlg.dll, FlashConfigCreateNetwork"

  Original title: wireless network connection wizard does not work

  How can I get my connection wizard of wireless network to work when I get the RunDLL error "an exception occurred while trying to run 'wzcdlg.dll, FlashConfigCreateNetwork' I can see no wireless connections more.  Not sure why all of a sudden it stopped working.  Thank you!

  Hi ChadWilliams_1974,

  Try the following methods:

  Method 1: Try the steps from the link.

  Troubleshooting network connection problems:

  http://www.Microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx#3

  Method 2: Reset TCP/IP Protocol, you can run the fix it from the link below and check if the problem is resolved.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  I hope this helps.

• Message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file:

  Receive the following message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file?: MSI

  * original title - cannot open files with .msi extension *.

  You try to open this leave a link online? If yes I would like to try and save the MSI on your desktop and then try to open.

• Network error when you try to read from C:\Windows\Installer\iTunes.msi

  Original title: error when you try to install iTunes on Windows Vista
  I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

  I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
  I am at a loss to understand this - I'm not much of a PC expert either.
  Any suggestions? Thank you

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
  Download link

  http://www.Apple.com/iTunes/download/
  
  Method 3:
  You can try the form as follows article knowledge base and check if you are able to install iTunes.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Reference link:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
  Just reply with the results. I'd be happy to help you more

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• Network error when you try to download a project on a Z10

  Hello.

  I'm having a problem to download a BlackBerry World project.

  The thing is that I created a Web launcher for my application with Webworks and sandbox in the supplier portal in a draft State so that I can download on the Z10 and test it before the release. When I'm in the BB world in developer mode and enter the SKU/project ID, found but when I click on download an error appears saying "Network error" and "a network error occurred while processing your request. Please check that you have enough coverage, and try again."

  This is the second project for the same application I the sandbox. The first was ok when I downloaded it and I have downloaded and tested without any problem. But with this one I get this error.

  Any ideas?

  Thanks in advance.

  Hi all

  This issue should now be resolved.

  -Jordan

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• SE "(tcp_error) the network error" error message when accessing a Web site

  Original title: network error (tcp_error)

  I get this message "error (tcp_error) of the network" when I open any web site - mine is win7 Ultimate with 64 bit.

  not even Microsoft .com also not opening.
  Help, please

  Hello

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  Hope this information helps.

• When you try to install Dreamweaver CS5 to my drive, after I entered my serial number, then my email (Adobe ID) and the password, I get an error message!: Network error. Please try again later. What should I do now?

  When you try to install Dreamweaver CS5 to my drive, after I entered my serial number, then my email (Adobe ID) and the password, I get an error message!: Network error. Please try again later. What should I do now?

  This is a user forum.  You don't talk about support from Adobe here.

  • Install you CS5 on 2 computers but don't turn off a
  • You have more access to other computers.

  Contact Adobe customer service via Chat online with Activation.

  Contact the customer service

  Click on the blue again "need help?" button.

  

  Nancy O.