network of the comments shows unsecured - why?

Similar Questions

• I try to print a document with comments with all the comments showing, a little like accept all changes in WORD and then print. How do I do that?

  I have a document. A person has introduced a lot of comments and delete a lot of text. I want to look at a printed version with all done propsed changes, i.e. will resemble what the document to the end, preferably with the changes still highlighted, but even if not, want tt see it all. How can I? Thank you.

  I tried to export to WORD because there you can accept all the changes and print. but the comments do not appear as comments in word.

  Hi MMRatlantys,

  When you print the PDF file, make sure that you have selected "Document & annotations" in the print area.

  

  I would like to know if it works.

  Kind regards

  Nicos

• USB devices - why the comments show hosts materials integrated instead of a USB device?

  Whenever I click on the icon of the Guest Windows Savely remove the device, it displays only the hardware built-in to my host computer:

  But he has never really shows all connected peripheral USB!

  What I'm doing wrong here?

  If so, why it appears in the USB list anyway?

  See http://sanbarrow.com/workstation-faq.html#p6

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• I would like to know why my name is not appearing when I make a comment on the page RSS, my dose of name not appear in the comment box, and the comment I made disapered, why?

  When I try to comment on a story on Facebook, my dose of name doesn't show in the comment box, then my comment disapers, why is this?

  Hello

  Check with Facebook help and Support and their Forums.

  Facebook - help and Support
  http://www.Facebook.com/help.php

  Facebook - Facebook Contact and support of Facebook
  http://www.Facebook.com/help/?page=835

  Facebook - Forums
  http://getsatisfaction.com/Facebook

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why are there two names of computers on my network page? (page network on the Start button)

  If you press start and go to the network option on the right side of the loading of the page showing the networks and also computer names and surely I'm only supposed to have 1 name of the computer on there as I have only 1 computer, but it is another computer appears on the page.
  I would like to know what this means and why I see the other computer.

  Thanks for any help
  Ash

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to run the scan for viruses online on the computer and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  Make sure you have wireless security enable:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-a-wireless-network-is-secure

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-different-wireless-network-security-methods

  It will be useful.

• Why did I lose the buttons in the comments to the newspaper in Firefox, but not in Google Chrome

  I read the Huffington Post from time to time and you want to comment on some articles. Each comment in Google Chrome has three buttons at the bottom and select either:
  Response
  Favorite
  Flag of abusive

  Now, if I have access to the site ( http://www.huffingtonpost.co.uk/) via Firefox, there is only the opportunity to respond to the comment. Why is this, is this something to do with Adblock that I activated and find it really useful.

  Thank you.

• Why my iPhone 6 s not connects to any network at the Japan?

  My iPhone connects automatically or manually to any network at the Japan.

  I did not receive my e-mail messages and text normally but no voice.
  The display shows the message: no service. What can I do?

  I bought my iPhone and a new SIM cart about 1 month ago.

  Ask your operator.

• I ONLY see comments on the network of the time machine?

  I've implemented a Time Machine Network, adding a TP link Extender to get signal from my office where the router from BT's home. I also checked the comments option and also the hidden network too in the House, however I don't see the option comments - what Sky does not recognize.

  What Hat I did wrong?  I have a spare homehub5 BT - can I use it as a spare router in the House to boost signal more?

  any help much appreciated!

  AJ

  Basically, the 'Comments Networking' function only works with Apple mobile networks. You cannot extend this network with a non-Apple as your TPLink device.

  In your case, you would need another time Capsule or AirPort Extreme to extend the network of comments.

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Network and sharing Center shows not connected, but the computer is connected to the wireless network

  When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

  Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

  Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

  Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

  It will be useful.

• Primary WRT1900AC &amp; comments networks on the same Radio channel

  Hi - Newbie here.

  The main network and the network of comments on my WRT1900AC occupy the same 2.4 GHz radio channel, regardless of the selection of a channel or using AUTOMATIC channel selection.  I want to change this scenario so that the primary network would occupy a channel (say, Ch. 11) and the guest network would occupy a different channel (say, Ch. 1).  I fell in my attempts.

  Change channel from the main network (for example, Ch. 11-Chapter 6) goes well, as checked the WiFi Analyzer application on a separate shelf.  For each network channels remain separated (Pri @ Ch. 6 & Guest @ Ch. 11) for about 2 seconds, then the guest network dutifully follows the Canal of the primary school where the two, then, reside (Pri & comments @ Ch. 6).  This second 2 delay leads me to believe that the two networks can be separated with success and coexist on two different channels, but only if the adjustment is made.

  I use the latest update of Firmware (Version 1.1.8.161917), and almost everything works perfectly.  I haven't checked for a situation similar to the 5 GHz band, but imagine that a cure for 2.4 GHz could be translated to a 5 GHz problem if it exists.

  Please do not hesitate to me flood with your knowledge.  Thanks in advance.

  Did a live chat with an environment of "agent" tonight, and, after some initial stumbles and a bit of the discussion on the issue, the agent said that "it's like that" and that the user doesn't have the ability to change the channel for feedback network.  Only I could answer that, unfortunately, Yes, the user makes, but in order to change the channel of Guest network, you had to change the channel of primary network.

  So, for now, 'that's it!

  Guess I'll have to wait for firmware open stable source to be released so that I can flash and dig a little deeper into the router.  Until then, I'll just scratching my head about the counterintuitive to have practice two networks on a radio band occupy the same channel, possibly generating interference of the internetwork.

  Thanks FurryNutz for your patience and your help.

• How can I display characters in 'Wireless Network Connection' - &#62; 'Properties' when the checkbox "show characters" is grayed out?

  How to display hidden characters in the Properties tab, in the connection, that I am using, under the wireless network connection box when that I should be able to check box is greyed out and unclickable?

  Also NOTE: When you try to use ctrl-p method, a ctrl-v, at the point where you click the box of characters on that he blanks.

  Hello

  You are connected to a domain?

  If the show characters check box is grayed out, the network, or the computer may be restricted by a group or local policy.

  If this computer is connected to a working network, I suggest you contact your help desk or IT Department.

  Concerning

• I have a Vista Enterprise desktop connected to the local network, but the notification icon still shows disconnected state

  I have my Vista connected to the network and the "network and sharing Center" shows that it is connected and network is accessible, but the network in the status bar icon displays an icon showing disconnected state. How to solve this problem? Restart does not help

  Guru

  Check and make sure you have these services defined in this way. This initiative will establish whether there is a connection.

  1 - on the road - network Manual connections
  2 network list Service - auto-
  3 network Location Awareness - road - automatic
  4. bad Service Network Interface - on the road - automatic

• Why the comment Panel keep appearing

  Hi, I created a form of an electronic document using LiveCycle, but now everytime I open the form in Acrobat keeps open the comments Panel. I can close or hide but appears when the form is loaded again. Thank you

  Frank

  HI -.

  Change the initial view for the file.

  Choose file > of Document properties and click the initial view tab. You will see that the notes pane shows as indicated by the behaviour of your document. Click on the drop down arrow and select Page only. Close the dialog box and save the document again. It should then open with just the displayed form.

  Donna.

• Why the comment is considered ddl statement

  Hi all

  In an interview, asked me 'why comment is considered a DDL statement if it does change not the structure of an object'.

  My answer was if it does not directly change of structure of an object (table, column, view etc.) and however it provides information on this subject.

  Comment also adds data in the table data dictionary.

  But the interviewer was not satisfied with my answer.

  I tried to look for the answer on the web, but did not find a lot of details.

  Could someone please suggest something on that.

  SomeoneElse says:

  Because it performs a validation.

  Each Oracle DDL commits implicitly but DDL is not all that implicitly commits. And this not is not commit defines what talking about DDL statement. One of the features of the DOF is active DDL change attributes of objects and that is exactly what COMMENT. He adds comments of the table/column and we can discuss how significant are comments, but it does not change the comments in fact are attributes of objects.

  SY.