Network printer not available through Remote Desktop on some workstations

Similar Questions

• I have a Windows 7 station on a local network that I am able to remote desktop, but not able to remote desktop for it?

  I have a Windows 7 station on a local network that I am able to remote desktop, but not able to remote desktop for it?

  Hello

  Thanks for the reply.

  I suggest you to refer to this article and check.

  Connect to another computer using Remote Desktop connection: http://windows.microsoft.com/en-IN/windows7/Connect-to-another-computer-using-Remote-Desktop-Connection

  Thank you.

• I get an error, "Microsoft Hosted network is not available" when I try to connect wifi for my HTC desire V through the laptop.

  I use dell xps 15 laptop in which I use Wired internet.
  I want to use my computer laptop wi - fi as a hotspot to use internet on my HTC Desire V for this I'm using connectify software but when I start HotSpot Wi - FI Access Point Encrypted (WPA2) method of sharing is for me the hosted Microsoft network is not available.

  Original title: Microsoft Hosted network is not available

  I had the same problem and that's what I did on my PC Win7:

  (Forgive me if my English is not good)

  1. verification of my network hosted in my driver. I have run the administrator command prompt and type netsh wlan start hostednetwork

  If you get this message:

  The hosted network could not be started. The group or resource is not in the correct state to perform the requested operation.

  
  

  Then you have the same problem with me. It is the next step.

  2. check my driver. Type of command line: netsh wlan show pilot

  Then I saw that my support pilot hosted network. If your driver does not support hosted network, I suggest update you your driver or reinstall it.

  How FND out your driver and update: Start - Control Panel - system and safety - device (under System) Manager - ECS

  
  

  3. If your drivers support hosted network but still will not start, then the problem could be that you do not have Microsoft Virtual WiFi Miniport Adapter (the same problem happened to me). You can search and download. I tried and installed the new card.

  Now I have Microsoft Virtual WiFi Miniport Adapter under network cards, in Device Manager.

  4. I tried step 1 and it worked! So I can run my Connectify and this error message never showed even once.

  I hope this works for you also.

  Good luck

• I have a problem with access to a server through remote desktop.

  Original title: impossible remotely to the server, but it can remotely to the server B and then server remotely

  We have difficulties to access a server through remote desktop.

  When you try desktop remotely to a server, it will notice connect.
  When you attempt to ping the server all the queries expire.
  However, he seems to know the correct IP address.
  If I'm away for any other server on the same network, I can then remote to the server from this server, but not directly, as I have other.
  Can I remotely from my office at work to this server.  I can't just access this server from my home PC.
  We are just confused...

  Hello

  Thanks for the quick response.

   

  As the computer is on a domain network, the question would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• e Print not available at this time - error message

  Hi HP

  My LaserJet 1102W works fine in normal circumstances. I can print from my wireless network and reach the appliance.

  But whenever I try to print using Google CloudPrint web, I get a message "e-Print" not available at this time The print job is waiting in my account Google CloudPrint, but prints never.

  It is a relatively new problem. I was able to print documents more than 100 of the clouds in the past, in various locations using Google Cloud Print.

  Any help you can give me would be appreciated.

  Thank you.

  Andrew

  The gateway must be set to the IP address of your router.  DNS can be 8.8.8.8 (DNS googles server) or another DNS server (you can check your other devices on the network for the two parameters).

  If you have a computer Microsoft OS you can get the opring settings a CMD window (type cmd in the Run dialog box) and using the comand "ipconfig/all".  This will give you all the details of IP connection.

  update the settings of printers from the server shipped printer.

• Bluetooth network is not available

  Been trying for a while to use AirDrop on my MacBook Pro (Version OS X El Capitan 10.11.6) and my iPhone 6 s more.

  Just realized today that it might not work because the Bluetooth on the Pro does not work. With each device I try a pairing, it says that the network is not available and that I need to make sure that network access is enabled. Trying to do this, system preferences > network > Bluetooth PAN, I get the same message. I need you to ensure that network access is enabled.

  Someone else had this problem? Any ideas on how to solve it?

  Open system preferences > Bluetooth. Make sure that Bluetooth is enabled.

• Why the applications are not available through updates

  Why are all updates not available through downloads on apple's site. It's a real pain having to update computers 2 - cost me twice the bandwidth on a connection slow broadband.

  Any suggestion that would save me doing updates twice?

  Concerning

  Ron

  If you register for an application installation before installation, you can simply move it to another Mac without downloading it again.

• Cannot print on my local printer when you use remote desktop to access the server (Server 2008).

  We are struggling to print on my local printer when you use remote desktop to access the server (Server 2008).  Cannot make it work.  Any suggestions?

  Hi EverettBurton,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• I use a computer laptop xps 15 in which I want to use my computer laptop wi - fi as a bt hotspot it gives me error that Microsoft hosted network is not available

  Dell xps 15 laptop with windows 7 Home premium 64-bit
  processor Intel core i5 2.30 GHz

  Hello tejashande,

  Thank you for the question!

  It is disheartening to know that have problems you with the computer laptop wi - fi. As I understand it, you get an error that Microsoft hosted network is not available when you use the computer laptop wi - fi as a hotspot.

  I need to ask you some questions to help you best.

  1. What is the exact error message related to networks hosted?

  2. is it works much earlier?

  Download and install the Wireless driver from the link below and check.

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/3854.XPS-15-l521x-Windows-7-driver-cab.aspx

  Answer to us if you are having problems with a Wi - fi connection or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Microsoft Hosted network is not available (CF00100E)

  Whenever I try to start a network hosted, I get an error message like "Microsoft Hosted network is not available". Any problem with my network card. I am currently working on Windows 8 operating system. Is it possible to solve?

  Hi Rithu,

  Try these steps and check:

  a. press the Windows key + R , type Devmgmt.msc to open Device Manager.

  b. click view and press on ' see the hidden devices.

  c. go down the list of devices and expand the "network devices".

  d. find an adapter with the name "Microsoft Hosted virtual network card" and then right-click on it.

  e. Select activate

  f. This will allow the AdHoc created the connection, it must appear in the network connections in the network and sharing Center, if the connection to the ad hoc network does not appear then open the elevated command prompt and apply this command "netsh wlan stop hostednetwork" without the quotes.

  g. after that, the connection should be displayed.

• Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  I got this program for years.  Update Windows 10 and after nothing more than headaches with he returned to Windows 7 and it is then Acrobat has stopped working.

  Hi lindat7439924,

  There is no uninstall for Mac Reader program. You can directly delete the application from the Applications folder, which is just trash/Applications/Adobe Reader.app.

  Then you can download Adobe reader from here: http://get.adobe.com/reader/enterprise/

  Kind regards

  Meenakshi

• Application not available through internal work space

  Hello
  
  Is it possible to make an application not available through space internal and connected work as an admin user? If so can you point us in the right direction? We have been watching all about to do, but couldn't find anywhere to do it.
  
  BTW - we made the request not available but we connected to the workspace where the app is as a developer and set the status as unavailable, I was wondering if we could do it as the admin user.
  
  We currently use Apex 3.2.
  
  See you soon,.
  Paul.

  I think you have misinterpreted? or maybe I?

  You want the option change the "availability" of an application, not change from run to run and build.

  You can't do it from the internal workspace from what I can tell, but can do so from within your current workspace if you have administrator privileges.

  See Managing the status of building in the Administration of the workspace in the doco: http://download.oracle.com/docs/cd/E17556_01/doc/admin.40/e15521/aadm_build_status.htm#BABFDJHI

  In addition, I don't know if you're aware, but you can also change the State of availability through SQL Developer.

  Van
  Trent

  Published by: trent on March 12, 2011 08:18

  In fact, that the documentation is for 4.x... not sure on 3.x, nothing in the doco. Maybe try the technique of the SQL Developer?

• HP LaserJet M1132 MFP: HP M1132 multifunction printer could not print from TS Win2008 (Remote Desktop), is that M1132 is based on the host system

  The logged-on user OS Win7 64 bit with M1132 MFP (usb). We have TS server with Win2008 64-bit OS installed. User to connect TS and runing application, then try printing with printer M1132 redirected pages, but nothing happened.

  We found the article below that explain the system based on host could not use remote desktop. M1132 does not appear (he has provied the hots-based driver for the printer).

  http://h20565.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c00605333&lang=en&cc=us#N10078

  is there someone can let me know, this printer can be used for remote desktop or not? Thank you.

  Hello

  The HP Laserjet Pro M1132 is based on host printer indeed and consequences it only is not supported on Citrix / Terminal Services / RDP.

  You can find the specifications below:

  Standard printer languages: host-based

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA0-4644eee.PDF

  Also the following document list the LaserJet Pro M1130/M1210 MFP series ' ' as not supported include:

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=4AA0-8465ENW

  Kind regards

  Shlomi

• Win32 5 error code printing through Remote Desktop

  I connect to a system windows server 2008 R2 by using remote desktop.  When I try to print on my local printer (HP laserjet 1200 redirected) nothing happens.  I checked the log of events on the server and there is an entry for my attempt to print indicating that a win32 error code 5 has occurred - access denied.  Access to what?  Any ideas how I can fix this problem.

  It suggests also I restart the coil fie - no idea how I make cela or is it a Kipper!

  Hi, Bob P_852,.

  The question you have posted is related to the server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Can Ping but not connect via Remote Desktop - how to change the settings of the outside LAN adapter

  I have a Windows Server 2012 machine connected to a Windows 7 Pro machine via a switch.

  Internet is shared on the Windows Server and the port sharing network has a static ip address. Similarly, the port connected to the Windows 7 Pro has a static ip address. I was able to desktop Windows 7 remotely from the server without any problem until very recently.

  Recently, I had to change some properties of the LAN on the machines and I was changing the gateway by default for the Windows 7 Pro, when I was hunting from my remote desktop session and I was not able to reconnect since. I don't know if I accidentally blew the subnet or the default gateway, but I know for sure that I do not touch the part of the parameters ip address.

  In addition, I can't ping the server computer but I am not able to connect via RDP. Please suggest any possible causes and solutions for this case. Both computers are remote and I can connect via the internet to the server computer.

  As my title suggests, I'm trying to find out if there is a way to reset the settings of the adapter LAN from Windows 7 to my server and proceed from that.

  Please let me know if you need more information.

  Thank you.

  RAM.

  Hi Ram,

  Please contact Microsoft Community.

  Problems with Windows Server 2012 are supported in the TechNet Forums. I suggest you send the request in Windows Server 2012 general Forums TechNet.
  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserver8gen

  Hope this information helps.