Network stops working after the installation of the VMware Tools on linux comments

Similar Questions

• Networking networking stopped working after the upgrade...

  I've been running a guest (32-bit) Fedora 10 with bridged networking on a Vista Ultimate 64 bit using VMWare Server 2 host quite happily for several months. After several recent updates, guest network connectivity has disappeared for most... I can still ping or navigate to the router (192.168.0.1) dsl, but nowhere else (ok, that and the local loop). Recent updates and changes included: a) installed Vista SP2, b) update of VMWare server 2.0.1 - 156745 and c) installed the VPN ShrewSoft and NoMachines Nx client on the host of Vista so I can remote desktop in the work. Fedora always seems to be running ok after all these changes, and it's only a week or two later I realized that I could no longer out on Linux network. Connectivity of the Windows is normal. BTW, hostnames and guests have also been changed, although I doubt it's relevant. Also, Fedora does not seem be automount or see the usb drives. According to me, who was working as before, but can not guarantee it. In any case, this combination makes get files of the Fedora guest problematic at the moment.

  After reading the posts here, I already tried several things with no luck... a) disabled vmnet1 and vmnet8, b) scored all networks as soldier in Vista, c) tried fresh install of VMWare, Fedora 10, and 11 (64) of Fedora, checked the settings of the primary and secondary DNS server in my router and I tried manually add those in the network configuration in Fedora.  The dns search path is set to domain.actdsltemp which corresponds to what I remember not seen before, although I do not understand. Route returns

  Destination Gateway Genmask Flags metric Ref use Iface

  192.168.0.0 * 255.255.255.0 U 1 0 0 eth0

  192.168.0.1 default 0.0.0.0 UG 0 0 0 eth0

  Ifconfig eth0 192.168.0.5 running watch

  I've attached the .vmx file.

  If anyone has any suggestions, I would appreciate it a lot.

  Thank you!

  I am facing similar problem recently. There was no resolution DNS of my virtual machines names. Try disabling the service of ShrewSoft DNS Proxy Daemon on the host machine, maybe that will help.

  http://www.shrew.NET/support/ticket/6

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• DNS stopped working after the latest Vista updates

  Yesterday my Vista Home Premium has been updated by Microsoft through the automatic update process. After the update and reboot network stopped working. I was able to trace this DNS no longer works. I was unable to solve the problem until I supported updates, after which the system returns to normal operation.

  Now, of course, updates want to be reinstalled, but I don't want the network to fail again. Any ideas?

  Change how to get updates:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

  Right click on those you don't need > UAC prompt > it hide.

  Never install party hardware driver updates 3rd through Windows updates.

  Go to the manufacturer's website, instead.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  See you soon.

  Mick Murphy - Microsoft partner

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• Installation of the VMware tools on PCLinuxOS comments

  Hi all

  I started to play with VMware player (version 6.0.3). I made a new virtual machine and install PCLinuxOS on it. I now want to install VMware tools on this comment, so I click on the drive-> manage-> install VMware tools. However, nothing seems to happen, and I've waited more than an hour. When I click on the drive-> manage according to me, it is said (download VMware tools). The host and the VM guest have access to internet. Could be blocking download, or in any way I can solve the problem? Thank you very much for your help - J

  You are running on Windows or Linux, VMware Player host? If you are running on the WIndows host, download the file: http://softwareupdate.vmware.com/cds/vmw-desktop/player/6.0.3/1895310/windows/packages/tools-linux-9.6.2.exe.tar

  Extract the. EXE file and run it. EXE file on host it will silently install the ISO Images of VMware Tools in the working directory of VMware Player.

  After that, try to reinstall the VMware Tools on VM, simply go to the menu player-> manage-> install VMware Tools.

• Unable to connect to the desktop after the Vmware tools update

  Hey guys,.

  I have problems with a Samsung PCoIP device if it refuses to connect to the virtual machine windows 7 since vmware tools has been updated

  I know very little about vmware view, when he tries to connect it connects to the server vmware view, swimming pool and looks like it is going to connect, but all I get is a black screen, then turned to the login prompt

  The PCoIP device can ping the virtual machine

  I can connect to the computer via RDP virtual

  VMware View version 4.6.0 build-366101

  Any help would be great

  The VMware tools install probably brought to light the specific video driver for VMware view. Try reinstalling VMware View Agent and be careful on the VMware Tools updates.

• HP Support Assistant has stopped working after the installation of the HP-Helper to check network

  My computer model: HP Pavilion SlimLine s5-1160 desktop with Windows 7 64 - bit Media Center

  While I was away from my computer this morning installed HP HP network check Helper. When I got home there was a message that I needed to restart the computer. After reboot, I got the same message. After trying several times, I have disabled assistance program using Add-on management, but the message from computer restart guard appearing. When I tried to open HP Support Assistant it opens, but instead, the restart popped up message. In the HP Setup Manager Wizard, I clicked on help, then launch support assistant and received... the message to reboot. If I open HP help and Support Windows and click "Contact assistance (Get in touch with someone at HP)" I get... the message to reboot. I have re-installed HP Support Assistant with the latest version on the HP Web site. After the computer restarts, I have... the message to reboot.

  Thus, the computer always tells me that I need to reboot, HP Support Assistant does not open and I can not get HP support number to call by clicking "contact support (Get in touch with someone at HP). Does anyone know a number I can call to "Get in touch with someone at HP?

  Thank you.

  Sorry, you encounter the problem with your PC.

  If you have not been able to contact HP, but here is the number:

  800-474-6836 (800 HP invent)

• Pavillion g6: my laptop audio stop working after the installation of window 10

  After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

  Try to update the drivers via windows update or hp support assistant. Headphones work?

• HDTV display has stopped working after the installation of El Capitan

  After the upgrade to El Capitan, the already functional and unproblematic mirroring the display of my iMac OSX for Panasonic HD TV has stopped communicating and the TV screen is blank! There is no options available when you select Preferences / display. No settings have been changed for Mac or TV before too, or after the upgrade!

  Hello Macthewife,

  Thank you for using communities of Apple Support.

  I see after update to El Capitan, you have problems mirroring to a HD TV. I suggest the following article to ensure that it is configured correctly and in the "Get help" section, there are a few suggestions if this does not work properly after installation.

  Use AirPlay to view a video of your Mac on a HDTV

  Best regards.

• DVD player stopped working after the installation of 12 items

  First, I loaded the disc DVD in the drive and tried several times to install 12 elements.  Whenever the program has been installed the computer would start flashing and the dvd drive may stop working. Every time I had to use a PIN to eject the DVD because it would not eject.  It worked well before its installation to 12 items. After that the program was finally installed dvd player worked.  But the program would be closed when you use it too often.  I finally just deleted the program of 12 items on my computer and install it on another system.  It's been a while since the abolition of the program from my computer. Tonight, I reinstalled the program Adobe 12 elements with the dvd drive works fine.  Trying to install the program, all loaded fine.  Then once more, the dvd drive eject nor does any work.  What happened several times with 12 elements of loading on my computer.  It is a real pain.  Now the DVD drive doesn't work, or eject.  Can someone help me out here?  It sucks. The other computer works fine.  It is a HP Pavilion, Windows 7 Home Premium system.

  Computer was off all night. Turned on this morning and the system works now.  I rebooted the system, at least six times last night with no result. I don't know what was different this morning, but everything seems to work.  So if it's not broken I will not try to fix it.  Thanks for posting. Dan

• Photoshop elements 14 stopped working after the installation of Windows 10

  After you have installed Windows 10 Adobe Photoshop elements 14.1 will freeze ("the program has stopped working. Close the program"). I had this problem when I bought Photoshop elements 14 six months ago and I have downgraded to Windows 7 after discover Win 10 was not compatible yet, but I have if this has been already solved now, since in the Adobe web site include Win 10 among the supported systems.

  No idea how to fix this?

  Disable and uninstall and then install and activate is the only idea I have

  or

  Photoshop elements Forum http://forums.adobe.com/community/photoshop_elements

  Select a topic and then I STILL NEED HELP to activate the Photoshop elements online chat

  -http://helpx.adobe.com/contact.html?product=photoshop-elements or

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-installation-Photoshop-elements-premiere.html

• My device audio stop working after the installation of update security for Windows 7 for x 64-based systems (KB2286198)

  Hi, since Windows Update automatically installed this patch my audio device stop working. It does not appear in Device Manager. I've restored the system to a previous point and works now. I have disabled the automatic updates of Windows, but I really appreciate if Microsoft Support could check this because at some point, I will need to continue the update of Windows (because of several security mistakes!).

  Thank you!

  I restore my system to an earlier point and did not work! After several hours of searching for a solution in the web I realized that (fortunately!) I had a copy of the registration precedent and do a comparison, I noticed that some missing case book lines:

  In

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_02 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0002\

  The 'Control' key with a string value 'ActiveService "=' Modem' was absent.

  Also in

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0001

  I added a 'Control' button with a string value "ActiveService" is"ksthunk".

  Finally, I restart my system and Windows again recognizes my camera and the driver installed!

  Of course this solution depends on the machine you have. I have a HP Pavilion dv2000 with Conexant High Definition SmartAudio 221.

  I hope this helps someone!

  NOW I'M GOING TO TURN OFF WINDOWS UPDATES!