I'm doing the internet sharing xp machine window on my laptop with window 7.

Similar Questions

• does the internet my computer in SafeMode... in normal mode, it is very insensitive.

  the computer is great in safe mode with network support but in normal mode, it's bad. the internet does not work. Help

  Hello

  Try these and it can also be a good idea to update your main drivers later (especially WiFi
  and the network card wired NIC. The General corruption may also play a role in this issue. And even
  the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, is no longer necessary, but)
  Java always install it and it causes problems - you never update Java to go back in and turn it off again.)
  Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right.
  Allowed are usually OK and "unauthorized" are not always bad. If in doubt about a program, ask
  topic here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and run.
  not all are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  (More on that below) startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search - find top COMMAND - made box an CLICK RIGHT-
  RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at the next startup, then apply OK your way out
  then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by
  pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load
  address of the driver, description, version, product name, company that created the
  pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd
  evening with their own software and drivers and all other main drivers you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable driver facilities in
  Windows updates, that leaves about Windows updates but it won't install drivers
  who will be generally older and cause problems. If updates offers a new driver can
  HIDE (right click on it) and then go get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ==========================================
  ==========================================

  After the above if the issue still happens it probably is starting programs including
  antivirus/antispyware/security.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process - this
  is a quick reference (if you have a small box at the bottom left - show for all users, to consult
  that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Network Unreachable behind the Internet sharing

  Hi guys,.

  I use an iMac as a wireless router with Internet sharing. Everything works and wireless clients (* 192.168.2) can connect to the internet via ethernet to the iMac.

  However, the ip range - 192.168.2. * for wireless clients cannot communicate with each other (ping, ssh, web).

  Firewall is disabled on the clients and the server.

  Is there a way to fix this?

  That is right. Sharing Internet connection Internet ONLY. Connected above clients are isolated from each other and all devices on the local network. It can only be used to access the Internet. If you need local connectivity, buy a wireless router.

• Time capsule of access on the Internet (PC MAC or Windows)

  Hi, I have a Time Capsule, and I want to create a folder and be able to access from anywhere on the Internet (regardless if it's on a MAC or PC based on Windows). I read several posts and google, but still I am unable to set up the time Capsule. Can any experienced user me explained step by step?

  Thank you

  SGL

  You need to tell us a few things.

  1 do you have TC as the only router in the network.

  If this is not the case, the configuration is entirely via the main modem router combo.

  Without a public IP address on the interface wan everything that is your router, you will not be able to access it remotely. For the most part, wireless, satellite or internet shared building will not allow always remote access.

  2. double NAT will never work, so if you already have another router modem the TC must be in the bridge.

  3 Apple offers NO WAY for PC/windows remote access to the TC. Neither iOS btw... the Apple of the only method allows is AFP via a Mac.

  Local people do via SMB to TC port mapping... It is poor and does not always work.

  The tool used for iOS, filebrowser shows how this is possible.

  http://www.Stratospherix.com/support/gsw_timecapsule.php?page=6Remote

  
  

  I do not recommend this somehow... It's open ports in a way that reduces your security seriously.

  I repeat... Apple has no PC access.

  4. There is a safe way to do it... buy a vpn router and use before the TC. VPN is recognized global method for secure remote access. Who will work for any device having vpn client available... OpenVPN is the easiest in terms of cost, configuration and security.

  5. There is another method entirely, and that is to store the files you need to join in the cloud... Cloud is a better resource than to use your own router as Pseudo-nuage.

  If you eliminate the need for PC access then use BTMM for access to the TC.

  CCMM is authorized only and only the Apple method which are likely to work.

  Have you even tried yet?

  See Tesserax doco on remote access.

  https://discussions.Apple.com/docs/doc-3413

• Cannot access the internet on a network Windows XP when Windows 7 goes to sleep

  Original title: Windows 7 Windows XP network problem.

  I replaced a Windows XP computer on my node 4 (2 PC, printer 2) cable network with a Windows 7 computer.  When the Windows 7 computer in mode 'sleep' the other (XP) computer cannot access the internet.  A message appears that there are 2 computers with the same IP address.  If I wake the computer 7 fine.  That is what it is?  I agree not all files between the computers.

  Hello

  It is usually the case when, for example, a router is off, but one or more of the devices connected to the router are left on.

  The devices to retain the ip address assigned to them, but when the router starts up again it has no knowledge of this. If when you start one of the other devices, the router can assign an ip address already in use. Concrete example that I reproduced with my router and the PC...

  • Start the router, then boot PC1 and PC2 - the router (192.168.1.1) will allocate for PC1 192.168.1.2 and 192.168.1.3 to PC2
  • Turn off the router, then turn off PC2, restart and shut off again
  • Put the PC1 to sleep
  • Start the router and PC2, the router does not PC1 and allocate 192.168.1.2 to PC2
  • PC1 to wake up and there still 192.168.1.2 who now is a confrontation with PC2

  Other ways to reproduce this situation may also be possible.

  All devices on your network must have a unique ip address, where the warning message.

  If you get this situation once again, the solution is to turn off all devices, including the router, then restart the router, then restart all devices connected to the router.

  To avoid this, you may be able to put ip Reservations for your router address which will ensure that all devices connected to the router always get the same ip address (unique). If you are unsure how to proceed, we will need your router brand and model to help.

  Tricky

• HELP linksys wireless USB adapter: (model # WUSB54GC) "acquiring network address" not actually connect to the internet! ?? Windows xp pro

  Hello. Ive been at this for 4 days now, I can't find a solution. I'll try to remember as much as possible regarding what ive tried.

  here goes...

  long story short, due to unfortunate system errors, I have reinstalled my OS XP home to xp pro. PC works great now! problem is... now my wireless adapter wont connect to the internet.

  When I had xp home edition installed, I could just plug in the adapter, and a few seconds, it would connect to the favorite network. (with all settings on Auto) no problem.

  now that ive put in OS, it's just cycling "absorbing the network address" infinitely...

  his watch the access point, the preferred network, showing the signal strength and do not show errors in Device Manager. right-click and choosing fix do not work. It gets stuck @ renewing IP address scene. its not send or receive packets under status.

  He EXPECTED to be functional? It uses a 10-digit WEP key.

  Ive tried both the linksys wireless monitor and the windows zero configuration utilites.i since removed the lynksys software screen because it never worked anyway. WZC is that used to work on xp family.

  I used " ipconfig/all" to determine the values of the network on the host pc. I tried manually punching in those values (IP address, subnet mask, gateway and DNS settings, according to the suggestion of a networking of friends) on the adapter wireless itself; using tci/ip options. still does not connect.

  Ive tried different USB ports, all that seems to do is to change the number of the wireless connection.

  It just does not connect to the internet.

  I have the driver I need for this after contacting linksys. I also disabled windows firewall and the firewall/antivirus of 3rd party associated with the network.

  He knows questions w / windows xp professional and this particular wireless adapter? (WUSB54GC) that's the only reason why I can think of that is not connected.

  what I forget? internet hard wiring of an ethernet port is not an option because there is no ethernet card installed in the pc.

  any help is greatly appreciated in advance.

  Thank you.

  Sorry it took so long for me to return.

  It was a setting under working group which had to be adjusted from reinstalling windows. (something that has been disabled I forgot, don't remember what it was since its been like 3 weeks)

  that he got the running dhcp... That is to say. allowed 4 dependence to work progrmas, boom, problem solved.

  the adapter now works with the automatic settings, using WEP encryption. as it should, and it was.

  Thank you very much for the replies, I appreciated the help.

• Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

  When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

  a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

  Hello

  · What type of encryption do you use on the router?

  · You have the latest drivers for your wireless network card?

  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

  a. Click Start, then select run.

  b. term ncpa.cpl type dialog box and then click OK.

  c. right click on wireless network connection icon and select Properties.

  d. click the wireless network tab.

  e. click on the properties button next to remove it.

  f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

  g. click OK to update the settings.

• Unable to connect to the internet using Google or Windows Live Mail access

  I have an Acer laptop with Windows 7.  Every time I have to connect to the Internet via Google, or attempt to access my emails on Windows live mail, it takes forever to connect to the time and the high bar always notes that Windows does not.  Please notify.  This happens only in the last year, no problems prior to this.

  What type of connection Internet?

  What Antivirus utility do you use?

  This happens in other web browsers?

  If you are on a wireless connection, try switching to a wired connection and try the download.

  Click Start, type: cmd

  Right-click on cmd, and then click Run as administrator

  At the command prompt, type the following:

  ipconfig/release

  then

  ipconfig/renew

  then

  ipconfig/flushdns

  leave the command prompt

  Click Start, type: folder

  Press enter

  Delete the contents of the temp folder

  Restart the computer and try to download again.

  If the problem persists, try resetting your router if you are connected to one.

  Turn off the router, unplug it, wait 10 minutes

  Plug it in again, power up once again

  Reconnect the Ethernet cable

  Try to access these web services again.

• The checkbox "Allow bluetooth devices to use your modem to connect to the internet" on my vaio windows 8 is grayed out.

  I try to use the internet connection from my laptop to surf the internet on my phone xperia z via bluetooth.

  Hey Jake,

  Are you able to connect other devices Bluetooth on the PC?

  I suggest you follow these methods and check if it helps.
  Method 1:
  Check if the Bluetooth is on

  Follow these steps.

  a. press the Windows key + R and type services.msc.

  b. locate supported Bluetooth service.

  c. right-click on the service and click Start.

  If it is already started, then stop and start the service.

  Method 2:
  If this does not help, I suggest you to update your Bluetooth driver.

  a. press the Windows key + X , and then select Device Manager.

  b. search Bluetooth and expand it.

  c. right-click on the Bluetooth drivers, then select Update driver software.

  Method 3:

  If no helper methods, then I suggest you to uninstall the Bluetooth drivers and download the updated website of Sony Vaio drivers and install them.

  Follow these steps to uninstall the Bluetooth drivers.

  a. press the Windows key + X , and then select Device Manager.

  b. search Bluetooth and expand it.

  c. right-click on the Bluetooth drivers and select Uninstall.

  Now, download and install the updated drivers.

  http://eSupport.Sony.com/us/Perl/select-System.pl?PRODTYPE=1, 24, 72 & DIRECTOR = DRIVER

  First of all, see the article:

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Satellite L550 - no access to the Internet after upgrading to Windows 7

  Hello

  After the update with the Toshiba Windows 7 upgrade offer I can't connect wirelessly to the internet.
  With LAN, I can connect to the internet.
  I bought a few months ago a Satellite L550 with pre installed vista 32 bit. Internet and connect to my router worked fine under Vista. But after installing the upgrade to windows 7 I can't access the internet or my router more.

  I first thought the router (Siemens gigaset sx551) vice and contacted my provider, they had me send a new router (Thomson TG789vn). The router and the laptop don't see each other, the signal is very good but I can not connect.
  I hope someone can help me because I don't know what to do next.

  PS. excuse me for my bad English

  John

  Hi mate,

  I founded similar topics that may be interesting for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49617
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49627

  If you look in the forum of wireless issues you will have multiple threads. Check first, and then you can give us a feedback if it works or not now.

  Good luck! :)

• Gets the error message that says non-genuine Windows, also lost the internet connection when installing Windows 10

  Original title: windows 7 Home premium product...

  I have a dell studio 1737 and was upgraded to windows 7 Home premium 32-bit. I was installing windows 10 when we lost the internet connection and now I get an error message on windows is not genuine. can someone help please!

  Use your Windows 7 Home Premium product key to activate it.

  Windows 7 is pre-installed on my computer, How can I find the product key?

  The product key is located on the COA sticker attached to the bottom of your laptop or in the battery compartment. In rare cases it can be found also in the memory compartment. For systems of the Tower, look at the top or the side of the system unit. It looks like the following:

  

  Click Start > settings > Update & security > Activation > change product key and then enter the new product key, and then click Next to activate

  If you cannot activate Windows 10 after all the above and you are sure that you have the correct edition installed, then please try phone activation:

  Activate your Windows 10 license with Microsoft Chat support

• I use Thunderbird on multiple computers to the same gmail account but I have a laptop with little memory, so I need this laptop only to download a few files

  I use Thunderbird on multiple computers to the same gmail account. I have a small laptop with very little memory and it runs out of disk space when it downloads all my folders. I would only download some of my file on the laptop, but keep all the folder on my other computers because they do not have problems with disk space. When I unsubscribe records in 'manage folder subscriptions' then he cancels his subscription on all my computers, not just the laptop. When I go to 'Properties' on the folder and sets 'retention individual police' these settings are not applied at all. What can I do?

  All of the messages in each folder will appear in your message list. But this does not mean all the bodies of messages are downloaded, if you have properly configured the parameters of the disk. If what I described above stuck in your settings then Message body should be downloaded only 'on demand' when you click on each message.

  To confirm this install the addon glodaquilla, which has a column "on the disk" that indicates if a message is on the disk. If you want, after you have installed the addon set Thunderbird to work offline, so it does not download message body when you click in the list of messages.

• I get the following popup when I start my Acer laptop with Windows 7 - Microsoft dynamic C++ Debug Library...

  I get the following popup when I start my Acer laptop
  with Windows 7 and I use Google Chrome as My browser - I would like to know how to
  it stop what happens when windows starts. -Thank you--->
  Dynamic Microsoft C++ Debug Library
  program: C:\Windows\system32\igfxsrvc.exe
  File: D\Program Files\Microsoft Visual Studio
  9.0\VC\ATLMFC\INCLUDE\atlcom.h
  Online: 2475
  Expression: 0 & "communiqué called on a pointer that has.
  already been released.
  For more information on how your program can cause a
  the assertion failure, see the Visual C++ documentation on
  argues.
  (Press Retry to debug the application)
  Choice to follow:<--Not seen="">
  Abort Retry Ignore

  Hi Chris,

  This problem may occur because of the conflict between certain third-party applications.

  We will start the computer Safe Mode to check if the problem occurs in Mode without failure. If the problem does not occur in Mode safe, then you can try to set up your computer in a clean boot state to find what startup item or service is causing the problem.

  Step 1:
  To restart in Safe Mode, see the link.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not occur in Mode without failure, then you try to put the computer in a clean boot state.

  Step 2:
  To perform Clean boot follow the procedure below.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Not able to install the center of HP Officejet 5600 solutions on laptop with Windows 7

  I bought a new laptop with Windows 7. Icannot install the all-in-one Officejet 5600 Center software on my new laptop with Windows7 HP solutions. CD tells me system is not compatible. What is the procedure & what program file is available for download? Advice please please!

  You can download the Setup file for your printer from the link below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4062&product=441125&sw_lang=

• Files from the server does not update the when editing in Machine Windows 7

  I am editing the files on a server with a machine running windows 7 pro. Some files are not updated when changes are made, but the machine seems to be storing it locally. Does anyone have an idea on how to fix this? Thank you!

  Hello

  As you are working on a Windows Server environment I suggest you you posted the question under Windows Server TechNet forum for assistance from the public pro IT. see the following link:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  Hope this helps