Unable to connect to the desktop after the Vmware tools update

Similar Questions

• Unable to connect to the VMware web service: invalid key file

  Hello

  We have a CPO 2.3.1 who refuses to connect to vCenter (see newspaper excerpt at the end of the post).

  Recently, we changed our server vCenter (part of a 5.1 update).

  We tried the following workarounds:

  • Remove and add all the elements of the platform from the portal using services SE
  • Re import automation packs (4 of the Starter Edition v2.3.1.38)
  • Re on the keystore password

  No change at all...

  Do you have an idea on how to fix this?

  Thank you.

  Kind regards

  Stone

  || 235. 02/10/2012 15:46:21.667 | 6072. WCF: http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord ' gravity 'Error' = >http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxhandling of an exception. . Tidal.Automation.Server.exe Tidal.Scheduler.Common.Communications.CommunicationException, Tidal.Scheduler.Common, Version = 2.3.0.0, Culture = neutral, PublicKeyToken = fba593b23cf207cdthe connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: Invalid keystore. to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)Tidal.Scheduler.Common.Communications.CommunicationException: the connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  || 236. 02/10/2012 15:46:21.667 | 6072. An exception that is not of type rhapsodyexception has been captured while a webmethod call was made.  This exception has been intercepted and generic.

  || 231: 02/10/2012 15:46:21.667 | 6072. EXCEPTION (Tidal.Scheduler.Common.Communications.CommunicationException): The connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  Stack trace: at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. <> c__DisplayClass1c. b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object, Object [], Object [] entries & exits instance)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  You have an invalid key file because the HTTPS certification has changed. You must remove the old keystore file and restart the OPC Server and then reconnect / run something against vCenter.

  It is also possible to host Adatper framework/java problems I've seen often.

  If you need more information, you will need to prosecute TAC with your service contract please. Normally, we try to solve no newspapers on the forums.

  -Shaun Roberts

  CIAC/CPO support team leader

  [email protected] / * /.

• Unable to connect to the VMware Research Service - the SSL certificate verification failed

  Hello world

  to implement the new vCSA 5.1 but I get an error when you try to connect via browser Web Client.

  "Impossible to connect to the VMware Research Service . https://xxx.xxx.xxx.xxx:7444/lookupservice/sdk - The SSL certificate check failed. »

  I've found this KB

  http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & externalId = 2033338 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 423540040 & StateID = 1% 200% 20423538503

  The manual/work around seems to be a lot of work for me and perhaps this will cause other problems in the service due to problems of certification :/

  I also think that this cannot be the solution for a whole new vCSAppliance...-_-

  I am also able to go to https://xxx.xxx.xxx.xxx:9443 / admin-app

  is it correct for the device?

  You need to regenerate the certificate for Server Appliance after change of IP/hostname.

  Visit this link: http://www.virtual-blog.com/2012/09/failed-to-connect-to-vmware-lookup-service/

  Also, the admin/management interface is https://: 5480

  Lack of credentials [root/vmware]

  HTH

• Unable to connect to the Server supported updates down

  Adobe cloud does not connect to the server so I cannot update and am not currently able to use lightroom or photo shop

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  failure to help, attach a screenshot showing the error message.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• 'Unable to connect to the server' after updating to iOS 9.3

  After updating my iPhone 6 more for iOS 9.3 I get the message "unable to connect to the server. I can't connect to iCloud more!

  It's your phone antivirus. If you have an application like 'disconnect' you must remove it and then you can connect and reinstall.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• After installing an update on Friday morning, I am unable to connect to the HTTP site

  I ran an update Thursday night and Friday morning that I was unable to connect to the internet. After a repair, it seems that I can connect to https and ftp sites, but I can't connect to non-secure http sites. I don't know if a setting has been changed or if there is another question. Thanks in advance for any help.

  original title: unable to connect to http sites

  I finished to restore on the eve of the update and everything works. I did it after trying the method 1 & 2 above. WinHTTP was not anywhere on the list of services and connections have been implemented according to the instructions. I hesitate to run updates until I know what caused the problem.
  The browser is IE.
  Here's the ID numbers updates which took place:
  KB2618451, KB2618444, KB2544893, KB2564958, KB2592799, KB2619339, KB2620712, KB2624667, KB2633171, KB2639417, KB2633952, KB2641690 AND KB890830.

• After a virus attack, I am unable to connect to the server from any client computer.

  I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  original title: connection from the Client to the network problem

  Hello

  Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• After an attack of virus on the server, I am unable to connect to the server from any client computer.

  After an attack of virus on the server, I am unable to connect to the server from any client computer.

  Applies to: Windows | Windows XP | Networking, Mail, and getting online

  I have a small net work in my house, and until yesterday, the network works well. MSSE clean virus win32 on my server attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. I used MS Fixit widjows firewall and then problem determination after the Client computer request user name & against which I entered the login data, password but it displays the same error message.

  PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  Hello

  Because the problem is with the server, I recommend you post this question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect to the internet after the removal of important processes in the task bar

  I am not very tech-savvy then let me explain.

  I have a laptop Lenovo I recently bought in August 2014.  A friend suggested that I have download the free application "Open Office" in line, so I could open a school power point.  Open Office gave me a handful of viruses, which I managed to delete, then having served the system well, panic I accidentally opened the Task Manager and deleted a bunch of processes that are running.

  Now, I find that, although I am connected to WiFi, I can't open Internet.  I click on Firefox, but it shows that I am unable to connect to the Internet.

  I have Windows 8; an easy way I can solve this problem?

  Thank you.

  Original title: I accidentally turned off the program that allows my computer to connect to the Internet

  Hi Tunasushiroll,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  The problem can occur for various reasons, including incorrect TCP/IP settings configured, firewalls third of anti-virus programs blocking the connection, or due to bad the advanced sharing settings. So, I would suggest trying the following methods and check if you system is able to detect the wireless network.

  Method 1:

  Run the troubleshooter network first, and then test your Internet connection.

  Open the Network Troubleshooter by hitting on any fly in the Dashboard screen, quilting Search(or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), entering the network troubleshooterin the search box, type, or by clicking settingsand then by typing or clicking on identify and fix network problems.

  If the problem persists, try the following method.

  Method 2:

  Second of all, please check if the WLAN service is started and set to automatic. If it is stopped, then I suggest you to start the service and set it to automatic.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Select the Autoconfiguration WLAN service in the list and double-click it.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click apply and then click OK.
  5. Restart the computer and verify if the network is detected. If this is not the case, go to method 3.

  Method 3:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X, click prompt (Admin).
  2. Please enter the following commands and press ENTER after each one.

     netsh int ip reset resetlog.txt
     netsh winsock reset
     ipconfig/registerdns
     ipconfig/flushdns
     ipconfig/release

  3. Restart the computer to check the issue.

  Check if the system is able to detect the network. If this is not the case, go to method 4.

  Method 4:
  Temporarily disable the security software (if any), and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before