"Network unavailable actions" of a certain machine - but others can access it fine?
Thanks for the reply, I managed to solve this problem on my own. Apparently changing routers, configuration, etc. Windows has decided to remove the Protocol 'Client for Microsoft Networks '. Apparently without her, he allows other machines to see in, but does not allow the machine without this Protocol to see outside (where the error).
Tags: Windows
Similar Questions
-
I created actions on my xp machine, but I can't map of these actions
I created actions on my xp machine with the appropriate settings for each user. Then, when I try the mapping of these actions on another computer, the problems occur. I can't map to actions that require me to use another username and password. When I look at the session of shared folders, it shows that the connection is as a guest. The actions that I have created have the same permissions as the ntfs permission.
Hi Paulo,
Thanks for posting your question in the Microsoft community forum!
I'm sorry to hear that you found a mistake in trying to map to the shares on the windows XP computer.
1. What is the full error message?
2 is this a wired or wireless network?
3. are you connected to a domain network?
4 have have there been recent changes made on the computer before the show?
I suggest to check the following links and check if it helps.
How to connect and disconnect a network drive in Windows XP
http://support.Microsoft.com/kb/308582
How to configure Internet connection sharing in Windows XP
http://support.Microsoft.com/kb/306126
Troubleshooting Internet connection sharing in Windows XP
http://support.Microsoft.com/kb/308006
How to use Simple file sharing to share files in Windows XP
http://support.Microsoft.com/kb/304040
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
I want to use the custom pattern, actions ets... But I can not find custom files to [presets > model] or [presets > actions]... Where do I put these files?
If you're on a PC - C:\Users\ [username] \AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets
-
Hello
"You don't have permission to access \\computer x\c. Please contact your network administrator to request access to ' I want to be able access all computers on my network, whether they are Windows 7 64-bit or Windows XP Pro machines.
All computeers can access Internet and my printer.
I'm unable to access files on one of my computers on my home network to a PC running Windows 7. The same PC can access most of the other files on the other PC. I have a mix of XP Pro and Windows 7 and they are defined as a working group not a homegroup. To complicate the isue is a laptop computer that cannot access this computer either. But the facts are that two Windows 7 PCs that appear to have identical settings cannot access both another windows 7 PC. I guess that the unreachable PC appropriate sharing as other computers on the network can access.
How can I change the target of the PC share permissions so I can access it from any computer on the network? Or maybe the question is from the other computers that access computer is blocking access to the setting on the PC that can't?
All computers can view the readers there is a problem if a drive is empty, why report it: "you are not allowed..." »
Hello
Refer to the suggestions for the following links and check:
Share files with anyone
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
Networking of computers running different versions of Windows
I hope the above information helps!
-
This computer uses XP. Latest version of Firefox works well. I can't launch the Comcast/Xfinity TV stuff, but all the other tricks video works fine. I can run the TV stuff if I use Windows Explorer. I have Windows 7 on all my other computers and Firefox will run the Xfinity TV stuff? What Miss me...
Do you need to use it as your ISP Comcast? I got a response from Safari, but only an error "sorry, this video is unavailable."
-
When I start my network icon in the tray system shows I'm not connected, or it shows that its acquiring network address and it stays like that, but when I opened my browser, I can browse the web, which means that I have a connection.
I guess its some error or something, can someone please tell me how to solve this problem?IM using Windows XP
Hello
- How long have you been faced with this problem?
- What were the changes made before the problem occurred?
You can view these methods:
Method 1:
I suggest you to refer to the early stages of this link:
http://support.Microsoft.com/kb/956196#gM1
Method 2:
Windows wireless and wired network connection problems -
original title: printer problems
When I try to print the Web form, I receive a message to add printer, when a printer is already connected and working. I can't print at all from the internet but you can print emails
Hello
1 have you made changes to your computer recently?
I suggest you to follow the steps below link Microsoft and see if it works:
You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7
http://support.Microsoft.com/kb/973479
Concerning
-
Keyboard does not not on the desktop, but I can access the BIOS
I have a desktop Compaq Presario SR1220NX w / XP SP3. Using the keyboard I can access the BIOS (F1), but it stops working when I get on the desktop. I tried 2 P/S, USB, wireless keyboards (they are all worked on other computers) and they do not work once I get on the desktop. When I press a key on the keyboard they make a thud. I have the latest version of the BIOS.
I have reset the BIOS to its default settings, but it does not solve the problem.
Any suggestions on how to solve this problem would be appreciated.
Can you start in SafeMode (f8) on the blue HP screen? If you can, then you might try to return to a well known system restore point.
-
the network unavailable actions, but if you map as network drive works fine!
Hi all
Recently we started getting an error on access to network shares on our local network, its give a strange error "specified path does not exist" / "we are unable to find the.
, please make sure you're using correct location or web address". I checked below article regarding this issue but didn't solve my problem.http://www.megaleecher.net/Fix_Windows_Cannot_Access_Error
Strange thing is that we don't face this issue with all the shares on the same server but some of them, very random, no common thread. Another interesting observation is that I am able to open the Share as a Network Map Drive not directly from Hyper Link.
Note:-
1. TCP/IP properties are fine
2. Tried disabling antivirus on both server and clients.
3. Tried above mentioned registry edit
Your inputs are valuable on this
Thanks
Uwaiz
Hi,
Apologies for the delay in response.
For this question on some network shares not accessible which are connected to a server, you may post your question here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
-
Since the release of Firefox 13 (arrow), I was unable to connect to gmail and igoogle (didn't bother with other google services because these two are out). I'm connecting... connecting... and nothing happens. I am able to open two sites in Chrome, but it is not my default browser is a truncated version of what I'm used to and I found the site web incompatibilities. At work (a job of the Government so very locked) I am able to open gmail and igoogle successfully in the browser of gov ' t IE, however still many features is blocked. I would like to be able to open gmail and igoogle in this version of Firefox, or even to restore the previous version.
Hello TomatoQueen, please try the following:
enter Subject: config in the address bar and search for the preference named network.http.keep - alive and where it is set to false, it toggles true (the default value) by double-clicking it. Then, restart the browser and see if it works properly again...
otherwise, turn network.http.spdy.enabled to false.
-
My network connection shows no internet access, but I can access the internet
Hardware: Dell XPS 8300OS: Windows 7 family
System type: 64-BitIn the network and sharing Center, it is show the connection between the network of Multi and the Internet has an 'X', but I have full internet access.Is there a way to fix this?Hello
I understand that you are able to connect to the internet when your computer showing no network connection.
1. did you of recent changes to the computer?
I would suggest trying the following instructions and check if it helps.
Method 1: update the network driver.
Steps to update of network driver:
1. click on the Start button.
2. in the search box type devmgmt.msc, and then press ENTER.
3. Select the network card device and right click on it
4. now, select Properties.
5. in the Properties window, on the driver tab, click Update driver.
6. After installing the updates, restart the computer.For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Method 2:
Temporarily disable the Antivirus and firewall
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Hello!
I have several e-mail accounts configured in my thunderbird, which is set from the perspective of unified display. They work all if I click to see only the emails on behalf of individual, except one. As soon as I press a thunderbird crashed... I have already deleted the account and reconfigured again... and the same problem is happening... Does anyone know how to fix this?
One of the errors IDS is this 726ca18a-986b-44ca-9b20-c1bc72150618 and the main reason for crash is EXCEPTION_ACCESS_VIOLATION_READ... but I have disabled all add-ons and the same error also occurs...
Thank you very much!
See you soonA fix has been developed, but it is not available for version 38 during about two weeks. Until then I suggest you download and install the version 31.7.0 of http://download.cdn.mozilla.net/pub/mozilla.org/thunderbird/releases/31.7.0/win32/en-US/Thunderbird%20Setup%2031.7.0.exe should not cause your messages to redownload. If you use the calendar module, you need to reinstall the version 3 of the calendar addon (which should not affect calendars you use).
-
Hello.
I can't access google in any browser ( Chrome, Explorer,Firefox). It just does not load. But i don't have any problem with any other sites. Actually i could even access google just yesterday.
I tried to delete the cookies, anti-malware software installed, I deleted the cache, I erased the history etc... Basically, I tried everything that was suggested on previous questions, but nothing helps.
I would really appreciate if someone could help me.
Thank you.INDY1391:
Your problem is solved? If you have not already the case, please mark this thread as solved by the solution of marking.
This will help other users experience similar problems helps to find faster and more efficiently. -
Associated CCP: cannot read in the 'normal way' a2l file a certain variable while others can I
Hello
If it has been validated in someother place please excuse me.
Here's my problem.
I have an a2l file where I read some variables (characteristics). I use the VI found on measurement and ECU calibration instrument.
The used VI is "MC Characteristic Read.vi"
For some variables, I get the error:
Error-301033 occurred at MC Get Prop tank Dimension.vi
Possible reasons:
Toolkit ECU Measurement and Calibration: (Hex 0xFFFB6817) the definition of the feature is not found in the A2L file. Most likely, the characteristic name is misspelled or invalid, or the A2L database file has been damaged. Solution: Make sure that the characteristic name is spelled correctly and that the A2L database file is valid. / / /
I'm 100% sure that the variable is set because I find with search function in the island of a2lf. The other variables I can read without errors.
Also, I created a unittest vi where I use the "raw" reading successfully. I am able to read the values that I expect the good address give me a momentary solution.
This one is using "MC generic.vi" with the command send 'CONNECT' (0 x 1) and also use the "download of MC. VI"with exactly the address of the variable and find values that I expect.
As guessed you, I don't want to use in my project, addresses (depending on each version) but the names.
Someone encountered the same problem?
Best regards
Vincent
To all those who may concern...
Attention to capital letters! Upper case... tiny... I spent a lot of time to cause to not pay attention to this.
During playback of the a2l file values are CASE-SENSITIVE.
Many thanks to Andreas that has guided me and make me realize the error.
Thanks again and good luck!
Vincent
-
The locked but user can access with other users
Hi all
I blocked a user in oracle and trying to "Account is locked out" displaying messages of connection.
But I am able user from other users query tables. How do I block it?
For example:
I had blocked a user User1. When I logged in a user named USER2 and when I call SELECT * FROM USER1. Table_name, displays the data.
I need to block this question from other USERS.
Help, please
Thanks in advance...
Account lockout does not prevent others to get access on user objects. The only change is that the user won't be able to connect more.
To block others access to objects of this scheme can be done by defining the privileges of law for other users, or with the vault of the database by creating a Kingdom
around this blocked scheme (DV requires an additional license).
Maybe you are looking for
-
I need to buy a cable to install an SSD in my Envy 17-j029nr. HP ENVY 17 Notebook PC Product: E0K90UA #ABA Warranty: 2y2y0y Model: 17-j029nr Rev: 1968-100 Issues related to the: What is the part number? Where can I buy it? Y at - it one provider othe
-
Install the game itself works fine, but when I try to download the patch I get this error stating: "failure Naming or remove file C:/Program Files (x 86) \EA Games\ command and Conquer Generals\English.big" does anyone know how can I fix? I want to b
-
Hi team, Today, I noticed in one of the switch is showing the error message below repeatedly. This switch is a member of the stack. 2147483644 04 ~ Mar ~ 2014 11:23:35 Draw the attention of % SYSARE STCK-A-UNITTRP: ID of the UNIT 4, trap: % environme
-
How can I add a location in the menu send to?
-
Windows 7 Pro Action Center shows current backup permanently
Windows 7 Pro Action Center shows current backup permanently, even if it's not, I don't have a backup set and Backup and Restore cannot find a backup.