Network - VMnet-natd(8) activity; OK to enable?

Similar Questions

• Homegroup error "your network connection must be active IPv6."

  When I try to create/join a homegroup I get this error "the connection to the network must have IPv6 enabled to create or join a homegroup. To enable IPv6, start solving the problems of the homegroup. Then I started the store only to find out that I've already activated but it says that I don't have. If anyone can help me with what would be a great help.

  Thanks Rowell

  Hello

  Homegroup is a special mode that works only between Win 7 computer and battery needs IPv6. Internet and network home and work use IPv4.

  ------------------------

  Maybe this can help.

  To turn on/off and set the IPv6 components - http://support.microsoft.com/kb/929852

  Group home-networking-the-easy-way - http://windows.microsoft.com/en-us/windows7/help/home-sweet-homegroup-networking-the-easy-way

  Group residential-recommended-links - http://windows.microsoft.com/en-US/windows7/HomeGroup-recommended-links
  Homegroup - frequently asked questions - http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions
  Why can't I create a homegroup? - http://windows.microsoft.com/en-US/windows7/Why-cant-I-create-a-homegroup

  Change-a-group home-password - http://windows.microsoft.com/en-us/windows7/Change-a-homegroup-password
  How to leave a homegroup - http://windows.microsoft.com/en-US/windows7/Leave-a-homegroup

  -------------------------------------

  Inclusive Post about other options to share files in Windows 7 and other versions of Windows.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/68d10f8c-2800-4E10-9cc1-9bcb44597d2b

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Print to network printer from evil with protected mode enabled (whitelist is configured and printer unc added to CTrustedSites/cSilentPrint)

  We are unable to print to a network printer using Adobe Reader with 'protected mode' active.  These problems occur when you try to use command line arguments to print to a printer that is not installed on the computer.  We are able to accomplish this task easily and protected offshore.

  The journal entries are (where < < unc_path_to_printer > > is a path UNC to a real printer on our network and < < username > > is the windows user name):

  [10:14 / 13:19:20] Adobe Reader Protected Mode logging initiated

  [10:14 / 13:19:20] Find the custom policy file: C:\Program Files (x 86) \Adobe\Acrobat Reader DC\Reader\ProtectedModeWhitelistConfig.txt

  [10:14 / 13:19:20] Adding a custom policy: FILES_ALLOW_ANY = C:\*

  [10:14 / 13:19:20] Adding a custom policy: REG_ALLOW_ANY = HKEY_CURRENT_USER\Software\ *.

  [10:14 / 13:19:20] Adding a custom policy: REG_ALLOW_ANY = HKEY_LOCAL_MACHINE *.

  [10:14 / 13:19:21] Bad Info to printer: device: < < unc_path_to_printer > >, Port: (empty), pilot: (empty), data type: (empty)

  [10:14 / 13:19:21] Bad Info to printer: device: < < unc_path_to_printer > >, Port: (empty), pilot: (empty), data type: (empty)

  [10:14 / 13:19:21] Bad Info to printer: device: < < unc_path_to_printer > >, Port: (empty), pilot: (empty), DataType: RAW

  [10:14 / 13:19:26] Invalid path: \AppData\Local\Adobe\Acrobat\DC\ \Device\HarddiskVolume2\Users\ < < user name > >

  [10:14 / 13:19:26] Invalid path: \Device\HarddiskVolume2\Users\< < user name > >\AppData\Local\Adobe\Acrobat\DC\

  [10:14 / 13:19:26] Invalid path: \Device\HarddiskVolume2\Users\< < user name > >\AppData\Local\Adobe\Acrobat\DC\

  [10:14 / 13:29:50] Bad Info to printer: device: < < unc_path_to_printer > >, Port: (empty), pilot: (empty), data type: (empty)

  [10:14 / 13:30:16] Exit code: 1

  Command line: "C:\Program Files (x 86) \Adobe\Acrobat player DC\Reader\AcroRd32.exe" / s/t "C:\temp\tmp_201510141141420.pdf" "< < unc_path_to_printer > >" "RICOH Aficio SP 4100N PCL 6 '" < < port_for_unc_printer > >'.

  OS: Windows 7

  Version of Adobe Reader: DC

  We have followed the documentation to configure protected mode and did the following:

  1. HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\DC\Privileged "bProtectedMode" = 1
     1. We can confirm that the protected mode is enabled in effect
  2. HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\DC\Privileged "tBrokerLogfilePath" = C:\Users\[user]\AppData\Local\Temp\AdbeReaderBroker.log
     1. We are able to see the journal, so it works fine
  3. HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\DC\FeatureLockDown 'bUseWhitelistConfigFile' = 1
     1. We can confirm via the newspapers being read in the white list file: C:\Program Files (x 86) \Adobe\Acrobat Reader DC\Reader\ProtectedModeWhitelistConfig.txt
  4. HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\DC\TrustManager\cTrustsedSites\cSilentPrint 't1' = < < unc_path_to_printer > >

  Our ProtectedModeWhitelistConfig.txt contains:

  ; Files section

  FILES_ALLOW_ANY = C:\*

  ; Registry

  REG_ALLOW_ANY = HKEY_CURRENT_USER\Software\ *.

  REG_ALLOW_ANY = HKEY_LOCAL_MACHINE *.

  We allow all files at the moment, once it's working us would limit it more far.

  We allow the input reg for the moment to remove the following journal errors, which we do not understand:

  [08:06 / 13: 52:21] NtCreateKey: STATUS_ACCESS_DENIED

  [08:06 / 13: 52:21] real path: \REGISTRY\MACHINE\Software\Adobe

  [08:06 / 13: 52:21] Consider changing the strategy using this policy rule: REG_ALLOW_ANY

  [08:06 / 13: 52:21] NtCreateKey: STATUS_ACCESS_DENIED

  [08:06 / 13: 52:21] real path: \REGISTRY\MACHINE\SOFTWARE\Wow6432Node\Adobe

  [08:06 / 13: 52:21] Consider changing the strategy using this policy rule: REG_ALLOW_ANY

  [08:06 / 13: 52.28] NtCreateKey: STATUS_ACCESS_DENIED

  [08:06 / 13: 52.28] actual path: \REGISTRY\USER\S-1-5-21-3056327225-4203895344-2874801580-19977\Software\Adobe\Acrobat Reader\DC\AVGeneral\cRecentFiles

  [08:06 / 13: 52.28] Consider changing the strategy using this policy rule: REG_ALLOW_ANY

  [08:06 / 13: 52.28] NtCreateKey: STATUS_ACCESS_DENIED

  [08:06 / 13: 52.28] actual path: \REGISTRY\USER\S-1-5-21-3056327225-4203895344-2874801580-19977\Software\Adobe\Acrobat Reader\DC\AVGeneral\cRecentFiles

  [08:06 / 13: 52.28] Consider changing the strategy using this policy rule: REG_ALLOW_ANY

  We would appreciate any comments on our Setup so far

  Thank you!

  Thanks for the details.

  I'm afraid this doesn't seem to be something that's going to work. Protected Mode player won't allow printing to a printer that is already installed on the system. Your options are either:

  1. install the printer before launching the player with this command line (perhaps install the printer through the same custom application that try to print the PDF file), GOLD,.

  2 disable the Protected Mode

  Sorry, that I couldn't be useful here.

• To access network shared files on active directory on one subnet to the other

  Hello, please, I have this problem with my network; I have a windows 2008 standard edition as my domain controller, I have a router cisco with two Lan port, a port has this subnet:172.29.24.0/24 and the other has this subnet 172.29.25.0/25.Both subnet see each other, I can ping any computer from subnet to subnet 172.29.25.0/24 172.29.24.0/24 and the 172.29.25.0/24 to 172.29.24.0/24 without get a query at the time that is, I would answer. I created an account in active directory and given the privileged administrative account. I then joined the computer to the domain, and he succeeded. I went futher to access my server application on the 172.29.24.0/24 subnet, and it succeeded. later I tried to access my application server subnet of 172.29.24.0/24 and it show the network path was not found. I used another computer to access the server application on the 172.29.24.0/subnet in the 172.29.25.0/network and I stil get the same answer. network not found path. I had access more quickly the application server on this system. Now what will I do to have access to all of the network files shared on both subnets.

  Thank you

  Samuel Bemi (Microsoft Certified Systems Engineer)

  Hi Samuel Bemi,.
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums, since it relates to the sharing of files on the server. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• Public additional unidentified network listed on my active networks.

  Today, I noticed that there is an additional network on my active networks. My home network which is my office - and an unidentified public network today appears below. What is - this and how it remove? or rather, how do I know what or where it comes from? Thank you.

  Lisa Lou

  Hello

  Please contact Microsoft Community.

  I suggest you to consult the steps and check if it helps:

  (1) use your mouse to click on the start menu, and then select Control Panel.

  2) click the button on "Network and Internet" Control Panel and select network and sharing Center.

  3) click on the tab "manage network connections".

  (4) find the old network connections you want to remove in the scroll bar. According to the number of connections you currently have in Windows Vista, it is possible that you need to scroll a bit to find the one you want to delete.

  5) click on the old connection you want to remove.

  6) click on the button 'delete '.

  (7) to confirm your selection by pressing 'Yes' when asked if you are sure you want to remove the connection. You can also choose to press 'Cancel' or 'No' to return to the previous screen and prohibit the removal of the connection.

  (8) notes that you can also change the network through the Network Wizard. Simply click on start, then "Connect To" and "show all connections".

  (9) select the network connection you want to change by clicking right on it and selecting the option you want. You can choose 'Disable' the connection, which would roughly have the same effect that completely removing, making it inactive.

  10) press the "Del" button after clicking on a network connection in the network connection window. This will completely remove the connection in the same way that detached from the control panel.

  I hope this helps. Do not hesitate to contact again us for any further assistance.

• relationship between the active layer and enable layer

  I use AE CC 12.2.1. I think that is not specific to the AE version but something general.

  When I read my layer by extendscript property, it shows layer.enabled = true and layer.active = false. If I change layer.enabled from false to true, the active property seems to follow the enabled property also.  I don't know the meaning of 'active', because even layer.active = false, there is no problem to manage the layer in AE.

  I would like to know something.

  1. How do the status layer.active to AE UI even I check it in the source of the script?

  2. What is the difference between layer.active = false and true?

  3. What is the relationship between the layer active and active layer?

  Thanks in advance.

  [Moved to After Effects - moderator script forum]

  In general, a layer is activated if the eyeball is on in the timeline panel. It is active if the layer is activated and that the model currently is between the points layer and output. You can control the active state. The active state is determined by the active state, in and out of the points and the current time.

  There are some exceptions (audio layers, other layers prone, etc.), but that's about all.

  Dan

• Network discovery cannot be activated, windows 7 Home premium.

  This problem is very simple to describe, but I do have a lot of time I can't find a solution. Help appreciated.

  In the network and sharing Center, advanced screen sharing, there is the option to turn on network discovery and file/printer sharing.

  When I put one or both these on 'on' and click on 'save changes', the screen closes without guest or delay. If I open the screen again two options are always on 'off '.

  I checked that the services concerned (DNS Client, Function Discovery Resource Publication, discovery SSDP and UPnP device host) are started and they are.

  Tried to reboot, windows update.
  Network troubleshooting is, as always, useless.

  I suspect that maybe some third party software plays a role here. I checked for malware and removing applications with a network component.

  This is probably related. I get an error 0 x 00000001, when I try and share a local printer.

  Manager tasks shows a two process named csrss.exe running, 936 kb, the other is 6532 KB. A matter of concern?

  All the machines in my LAN on the same workgroup. Not in a homegroup.
  Advice appreciated!

  Complete required wipe problem and re - install to correct.
  End.

• iPhone 6 more issues activation and network on the latest iOS 9.3.2

  I have an iPhone 6 it is having problems with Activation and networking connectivity. I activated via iTunes and updated to the latest iOS 9.3.2 this morning. The phone remain active for a period of time and then come back to need activation.

  Using WiFi it is full bars but no connection. I'm typing this from my iPad on the same WiFi connection, so not the network. If I turn off WiFi and cell there still no connection. The phone will receive calls (even when stuck in the activation state) and can make calls after you have enabled from iTunes.  She was released a couple of times, but always the same question.

  I tried to erase and reload from iTunes to the top, but the restore function requires that find my iPhone service shut down on the phone and this step requires access to complete network.

  Try the following steps:

  • Try connecting your device to your computer and launch iTunes. Choose your device and click on summary > update.
  • If this does not work, make sure you have the latest version of iTunes installed on your computer and restart your computer.
  • When it restarts load iTunes and try to select your device and click on summary > update again.
  • If this does not work, it's time to try a restore. Press and hold the sleep/wake and home buttons on your iPad or your iPhone until iTunes gives you the option to restore your device.
  • When it's over, you can restore a backup, and you should be good to go with 9.3 running iOS.

• Windows 7 "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. »

  Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS

  Hi Odile,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".

  
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. did you of recent changes on the computer before this problem?
  2 do you have wireless or wired Internet connection?
  Method 1:
  We'll first run check network troubleshooting if this can help.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  For more information, please see the link.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• No NAT (vmnet-broken natd(8)) DNS

  From glibc 2.22, vmnet-natd(8) cannot seek external results with the default settings.

  Temporary workaround

  Open /etc/vmware/vmnet8/dhcpd/dhcpd.conf and change:

  option domain-name-servers 172.20.142.2.

  TO

  option domain-name-servers 8.8.8.8;

  Bug reports

  • VMware problem no internet connection after "[Update] 17-08-2015."
  • Re: OpenSUSE 13.2 last glibc 2.19 - 16.12.1 on VMware workstation 11.1.0 host breaks networking NAT on guest vm
  • https://github.com/Manjaro/packages-openrc/issues/8
  • https://BBS.archlinux.org/viewtopic.php?id=201946
  • https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=818999
  • https://lists.debian.org/debian-glibc/2016/03/msg00371.html
  • / wire/527800? Start = 0 & tstart = 0

  Debugging

  The issue seems to be with vmnet-natd(8) does not not res_init.c correctly.

  https://sourceware.org/git/gitweb.cgi?p=glibc.git;a=history;f=resolv/res_init.c; HB = 5e7fdabd7df1fc6c56d104e61390bf5a6b526c38

  My guess is that these are the changes that broke it.

  https://sourceware.org/git/gitweb.cgi?p=glibc.git;a=blobdiff;f=resolv/res_init.c;h=02590fb1fdbb15c9ff20295d7a96d2d426752...

  There are approximately only ten calls where res_init.c is used, so it shouldn't be too hard to debug. The only problem is that vmnet-natd(8) is stripped; If someone could send me the symbols or a binary not stripped, it would be great.

  ltrace f Pei # 1337 vmmnet-natd(8) PID here

  2020 strncpy (0x7ffff83451e0, "ctftime.org", 64) = 0x7ffff83451e0

  2020 malloc (16) = 0x2644cb0

  2020 malloc (168) = 0 x 2644380

  2020 pipe (0x7ffff83451d0) = 0

  2020 fcntl (6, 3, 0 x 429280, 0x7ff3f92482e7) = 0

  2020 fcntl (6, 4, 2048, 0x7ff3f97221a2) = 0

  2020 malloc (65884) = 0 x 2654640

  2020 strncpy (0x26443e8, "ctftime.org", 64) = 0x26443e8

  pthread_create 2020 (0x7ffff83451c8, 0, 0x428ba0, 0x2644cb0) = 0

  mempcpy 10054 (0x7ff3f2aeebb0, 0x26449c6, 8, 7) = 0x7ff3f2aeebb8

  2020 pthread_detach (0x7ff3f2af0700, 0x7ff3f2aeffb0, 0, 0 x 800000 < unfinished... >)

  mempcpy 10054 (0x7ff3f2aeebb8, 0x26449ce, 4, 3 < unfinished... >)

  2020 <... pthread_detach took >) = 0

  10054 <... mempcpy resumed >) = 0x7ff3f2aeebbc

  survey of 2020 (0x26121b0, 6, 1000, 0 x 80412 < unfinished... >)

  __res_ninit 10054 (0x7ff3f2aefca0, 103, 11, 0 < unfinished... >)

  2020 <... survey took >) = 1

  gettimeofday 2020 (0x7ffff834d390, 0) = 0

  2020 read (3, "", 32768) = 71

  2020 malloc (199) = 0 x 2644430

  2020 memcpy (0x26444b0, "\0PV\3604\330\0\f)\335\0049\b\0E\0\09]\241\0\0\200\021\327:\300\250B\205\300\250"..., 71) = 0x26444b0

  2020 mempcpy (0x7ffff8344b80, 0x26444e6, 8, 7 < unfinished... >)

  10054 <... __res_ninit took >) = 0

  2020 <... mempcpy took >) = 0x7ffff8344b88

  __res_iclose 10054 (0x7ff3f2aefca0, 0, 2, 0 < unfinished... >)

  2020 mempcpy (0x7ffff8344b88, 0x26444ee, 4, 3 < unfinished... >)

  10054 <... __res_iclose took >) = 0

  10054 = 0x7ff3f2af0680 __errno_location()

  10054 (0x7ff3f2aefca0, 0, 0, 0) __res_nclose = 0xffffffff

  10054 = 0x7ff3f2af0680 __errno_location()

  10054 memcpy (0x265473c, "o\0\0\0E\0\09]\240\0\0\200\021\327;\300\250B\205\300\250B\002\344j\05\0%\210\237"..., 61) = 0x265473c

  10054 write (10, "\001", 1) = 1

  10054 close (10) = 0

  10054 (0x2644cb0) = < sub > free

  10054 +++ came out (State 0) +++

  2020 <... mempcpy took >) = 0x7ffff8344b8c

  12.1.1 workstation has been published, and the problem you have encountered seems to be listed as a problem solved.  Try to install Workstation 12.1.1 and let us know if the problem is solved for you.

  VMware Workstation Pro Version 12.1.1 12 Release Notes

  Download VMware Workstation Pro

  See you soon,.

  --

  Darius

• If parental control is disabled, activity remains enabled tracking?

  If Parental controls are turned off and activity tracking is turned on, it will always show reports?

  In addition, if Parental controls are turned off and activity tracking is enabled, the administrator will still be able to display the time of connection, etc.?

  Hi Smiles_1,

  You need to activate the Parental control to keep a record of the computer activity in activity reports. If Parental control is disabled, no monitoring will pass in the activity report even if it is enabled.

  For more information, you can consult the following articles:
  What can I control with Parental controls?

  Children online

  Hope this information is useful.

• DHCP is not enabled for wireless network

  Hi all

  I have problems with internet connection and a large part of the time, that Network Diagnostics says Windows "DHCP is not enabled for wireless network", then it solves a problem, but I lose the connection several times a day, and each time that do the same fix again.

  I checked the Device Manager settings and DHCP is started and set to automatic, I also ran CMD > ipconfig/all and can paste the results if need be.

  I use a VPN and never had any prior issued connection with it and it seems to be just as hard to connect if the VPN is enabled or disabled.

  Also recently I got the "security defender" virus which has been deleted successfully, the next day of the day it has been deleted, all network cards have messed up, I uninstalled and reinstalled them but that didn't work so I restored my system and that seems to fix the problem, my computer does not seem to run as fast after the virus as before so I wonder if it has an impact on my current problem.

  I use a Toshiba Satellite Pro 660D and Windows 7.

  Hello

   

  Thanks for choosing Microsoft Community. However the question you posted should be better on the TechNet forums. Please post the question here:

   

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

   

  Don't answer if you need assistance, we will be happy to help you.

• How can I add a static ip address on an active NETWORK of DHCP?

  I find it difficult to live, why is there a way to add a static ip address to a NETWORK adapter that is active DHCP?

  Windows always kick punch in the face, that was possible in previous versions of Windows, but MS decided to do my and many others life a bit more difficult and frustrating.
  Which takes a few minutes in a system * nix is not possible in Windows?
  I want to add a static ip address to all my computers in my house (about 10) without having to install a local DHCP server, for the reason I want a public ip address to all my computers (servers) witch my ISP provides. Even if I want a LAN for security reasons.
  And this should be possible without any new purchase of network equipment and so on.
  Why Windows users is more frustrated than others? Not difficult to understand.

  This seems to be a question that more people on the forum TechNet Windows 7 IT Pro network can have an idea.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  If you get an answer as to whether or not you can actually do what you want to do and it works please after return. The information can help others. Thank you...

• No network after 4.02 (491587) update

  When I upgraded to 4 day it was out, everything seems to work perfectly.  But 4.02 broke my Windows 7 computer virtual network card.

  1. the automatic update does not work, it crashed, and the Fusion dock icon went to the broken default app lost look

  2. I had to download 4.02 full installation, seemed to work but now the network card in Windows 7 VM believes that the network cable is unplugged.

  Your credit upgrde first 4 executed mainly GUI of much better and faster response.  I've been a happy customer, but 4.02 totally destroyed my work schedule!

  I tried NAT, bridged, all options; no luck.  I deleted the Windows 7 device driver to force a reinstall; no luck. Tried to re install tools VMwre; no luck.

  What is wth 4.02.

  Log in-app upgrade VMware crash attached.

  Some time, the network failed because the process of the network does not work. Open the activity monitor and filter if there are 6 vmnet process. (vmnet-netifup, vmnet-dhcpd, vmnet-bridge, vmnet-natd(8)) Usually, a reboot of the fusion of host and relanuch Mac will bring back all these processes, please give it a try.

• Wireless is not currently enabled on Qosmio x 500-10T

  The following refers to a Toshiba Qosmio x 500-10T operating under Windows 7 64-bit.

  If I go to manage wireless networks wireless tells me is not currently activated when all the drivers, etc... consent and running.

  Any ideas how to activate the wireless card?

  Hey Buddy,

  If the wireless network adapter is currently disabled you must enable it and that s.

  Therefore, use the hardware switch on the front of your laptop. The switch must be on IT.
  FN + F8 key combination can also enable/disable the WLAN functionality.

  Check this box!