Public additional unidentified network listed on my active networks.

Similar Questions

• Second laptop unable to connect; When trying to connect wirelessly, says connection is successful, but the Public unidentified network, no Internet.

  Hi all.

  I'm really sorry to post this question, I must have read 100 other threads on this topic, but none of the solutions seem to work for me.

  I have a home set wireless network in place, which may not have a lot of problems with it that I have a laptop W7 which has a perfect wireless connection, and also our TV connect when you want, as do our phones and Xbox.

  We bought a second hand Acer aspire laptop for our daughter. It is running Vista Edition family Basic. Even if she had the factory reset done on this, because we can connect to the router with an ethernet cable and it works very well, we managed to ensure that all updates of Windows etc are all complete.

  When trying to connect wirelessly, it says connection successful, but it is to a Public unidentified network, and there is no Internet. Also, even if it says Local access, we cannot connect to the router settings page is.

  I have uninstalled and reinstalled the built-in wireless adapter and updated the driver to do this, he says that he is as up-to-date as possible.

  I checked that DHCP is enabled, we tried dynamic and static IP addresses, we have disabled and re ipv6 enabled, we used the command prompt to reset winsock and stack ip, I looked into msconfig services for service # Id_String1.6844f930_1628_4223_b5cc_5bb94b879762 # Apple off but it isn't here.

  I have a real dislike for Norton / products McAfee and there is none of these on the laptop. We will install Comodo Internet Security, Eusing Registry Cleaner, Spybot S & D and Spyware Blaster as soon as the wireless is configured and that the Windows Firewall is disabled.

  We also have many turns of the spin off the coast and laptops, etc. and deactivation and activation of the adapter.

  It seems that all the usual solutions for the lack of connection are not the culprits this time.

  IPconfig for W7 laptop that works well is:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\Adrian>ipconfig/all

  Windows IP configuration

  Name of the host...: Adrian-laptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 4313 802.11b/g/n
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::30fd:c01f:ab28:fbf9% 13 (Preferred)
  IPv4 address: 192.168.1.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 13 August 2012 09:16:54
  End of the lease...: August 14, 2012 09:56:23
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 360244224
  DHCPv6 DUID customer...: 00-01-00-01-13-B2-5C-FD-90-FB-A6-A5-8F-73

  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {09285A7E-7837-4D7B-994D-C70130D43958}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 15:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:73 b 8: 8ed:720:a3fa:1e53 (Prefer
  Red)
  Address IPv6 local link...: fe80::8ed:720:a3fa:1e53% 24 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Reusable Microsoft 6To4 tunnel map:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  IPconfig for the Vista laptop that works wired but not when it's wireless is:

  Microsoft Windows [Version 6.0.6000]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Adin>ipconfig/all

  Windows IP configuration

  Name of the host...: Georges-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-1D-D9-1B-71-69
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::78c1:cedd:291c:e44b % 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: August 13, 2012 11:28:16
  End of the lease...: August 14, 2012 11:28:16
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 151002585
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1B-38-5C-28-24
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: isatap. {E409704E-A039 - 41A 8 - BEB9 - 614B6A018}
  493}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.1.2%12(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :
  ... Description: isatap. {CC1DD067-8D6C-4BDE-BCC8 - 13921 941
  532}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help or advice will be most appreciated thanks

  Norton or McAfee pre-mstalled of recovery of the manufacturer media?

  If so, did you uninstall it AND run the tool to remove the appropriate product manufacturer?

  Download the Norton removal by https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home

  Close all other programs, and then run the tool. When it is complete, reboot the machine if she wants it or not.

  Download the removal of McAfee Development tool from:

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Click on save and save the file to a folder on your computer.

  Navigate to the folder where you saved the file.

  Right-click MCPR.exe and select "Run as Administrator" to run the removal tool.

  When you're finished, restart.

• Home LAN in the network as 'Unidentified network' and position the 'Public' profile in black - cannot be changed.

  I have two systems running W/7 Home Premium - in both LAN I setup for my home network is presented as 'Unidentified network' and is set to the 'Public Profile ' represented in black, which can not be changed. I cam change the name of the local network that is displayed correctly, but nothing else. I tried to use just the TCP/IP 4 and setting static IP addresses, who worked on these systems using Vista, without success. I tried to use TCP/IP 4 and 6 without setting static IP addresses - again without success. Looking at the forum for discussions on what I have not been able to find a solution to the problem. There are two systems.

  MJMathews

  I fixed it after many hours. Here is my situation and my workaround. It will be useful.

  At home, I have 2 internet broadband connections. One is ADSL (20 Mbps) behind a router with DHCP and the second is cable (120 Mbps) directly behind the modem (public IP to the computer). Both lines go to my Mediacenter PC that is always on and running the Kerio control (https://www.kerio.nl/products/control/). Kerio is a router function software that supports the binding switch. As you can see, having a working internet connection is essential for me. A third network interface card is configured with a static IP (192.168.3.1), Kerio is running a DHCP server on it and is connected to my home network.

  I did two things, but I think the real trick is the second. Anyway, the first step was that I ran the Powershell script mentioned in the http://blogs.msdn.com/b/dimeby8/archive/2009/06/10/change-unidentified-network-from-public-to-work-in-windows-7.aspx . Works on all networks unidentified to the networks work. Well, not either but the Group residential don't start on work networks!

  Windows 7 detects your home network by looking at its front door. Because I was running router/gateway on the same PC, I don't fill out the IP Address of the gateway. So, he won't give the popup to identify the network and you won't be able to put it manually at home. Also, I forgot to do it in the script.

  Setting of the gateway to the static IP address also did not work because Windows deletes the address of the gateway (192.168.3.1) after pressing OK. My Tip: Add a second IP address for the network card. For example 192.168.3.254. Then leave the main IP (in my case 192.168.3.1) and set the IP of the gateway to the second IP (192.168.3.254). A few seconds later, Windows will address the context menu and select "Home network" and you're done!

• Unidentified network, cannot connect to the internet + 169 ip address

  Hello!

  I also have this annoying problem. I've seen a lot of posts similar and tried all the proposed solutions, but nothing worked.

  I have a

  ZTE zxv10 w300 camera and 2 computers (a laptop and a normal pc)

  There is no internet access on the computer that is not connected to the router with the cable. It can connect to this unidentified network, but not to the internet.

  This is the case with both computers.

  In addition, the computer that is first connected to the router with cable, will have this 169 ip address.

  I could solve this problem by disabling the wireless adapter, turn off the router, and then turn on the router and activation of the adapter, but then it changed back again. On one of the computers, or both.

  Any ideas what could be the problem?

  Your wireless card is not connected to anything.  The lines in bold show that the wireless adapter has an IP address that is generated by 'Addressing IP private auto' (APIPA).  This is what happens when the adapter is configured to obtain an IP automatically from a DHCP server (for example, your router) but isn't able to get one, either because the DHCP server on the router does not work (not in your case), or because it is not a valid connection between the adapter and the router.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5005G Wireless Network adapt
  Physical address.... : 00-1D-0F-F4-36-5B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::19db:c2d7:452d:b16a % 11 (Preferred)
     Autoconfiguration IPv4 address. . : 169.254.177.106 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 184556815
  DHCPv6 DUID customer...: 00-01-00-01-1A-36-12-69-00-1D-0F-F4-36-5B
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  On wireless connections, it is almost always the result of a misconfigured encryption password, but it can also occur if the router is configured with a MAC filter (or any other security measure) in order to prevent the connection, or if a firewall on the computer is not properly configured.

  From the network and sharing Center, click on the link 'Manage wireless networks' to get this screen:

  

  You can do several different ways.

  1 remove all wireless networks configured except a you know relate to networks other than your own, you will need to keep (for example, a wireless network at work).  Now connect to your network without wire in the usual way and carefully enter the encryption password.

  2. change the wireless network appears in the list to have the correct encryption password.

  3 remove all wireless networks configured except a you know relate to networks other than your own, you will need to keep (for example, a wireless network at work).  Connect to your router with an Ethernet cable and connect to the router configuration utility.  Disable all configured for the router security measures: encryption, MAC filtering, time of day restrictions, etc.  Now connect to the network without wire in the usual way.  If it works, you can reconfigure the security measures using a router configuration utility (even if there is really no need to use anything other than the WPA2 encryption and a password).

  If you are unable to connect to the router wirelessly when you have disabled all the security on the router, check third-party security software installed on your computer to see if it blocks the wireless connection.

• How can I get unidentified network settings stick, private and change its name?

  I use Windows Internet Connection Sharing (ICS) on my computer at home, because my Internet is wireless usb (AT & T Quicksilver) device that can be plugged directly into my router (Linksys WRT110).  Given that the router accepts only as an internet connection ethernet cables, instead I use my desktop computer as the connection (ICS) and using the router only as a hub, essentially.

  Everything is working well at the moment.  The Office will connect to the internet and other computers and devices connected to the router (wired and wireless) are all works well and can share the internet connection.

  But whenever I restart the desktop computer, the default network is "unidentified network" and as a type of 'Public' without discovery service.  So every time I go to network settings and make it private.  It works fine until the next reboot.  In addition, I am not able to change the network name.  The field seems open for entry, but selecting and typing does nothing.

  I don't know if it's relevant, but other devices to connect to the network are laptops (of various working groups, need to be since they are mainly used to work) and a DirecTV DVR, using Mediashare (via Windows Media Server).  Yet once, they all work, after doing the private network, but this is lost at every restart of the desktop computer.

  I wish I could have it be a private network that is identified by a name and keep these parameters at each reboot.  But I have yet to find an online solution that worked for me.

  Matt,

  Thank you very much.  It worked like a charm.  I was pulling my hair out on this one for a few months.  Once again, a big thank you!

  For anyone else trying to solve the same problem, here is the summary of the solution.

  I have already had no default gateway specified.  As advised by Matt, I right click on the Local network connection (in network and sharing Center / manage network connections) and went in the IPV4 properties and put in the address of a default gateway (equal to the IP address of my router/hub).  I left the ICS settings and all the way IP addresses which I had them before (with zero in the third byte of the IP address of all and ICS turned on).  I have no registry changes.  The only change is the default gateway.  After this change, a wizard appears to allow me to set up the network properly.  And I could rename and define the private network.  And the changes were intact after several reboots.  Perfect.

  -Andrew

• Vista unidentified network problem

  My HP G60 laptop under vista home premium got an "unidentified network" problem and not able to get on the internet. I even tried to reinstall vista to factory default, still the same problem with my wireless router.

  Spec:

  -HP G60 laptop computer, running vista Home premium 32-bit, with 3 GB of RAM

  -Belkin router

  -I am able to connect via a fine wired line but with a Wi - Fi, it shows constantly 'unidentified network', even if I changed the Private mode in network and sharing Center.

  -J' tried the following: listed an SSID different router, reset the router by default, to reinstall vista, tried other mechanisms, such as specified in the forum, with no difference

  -When you configure the router, I have clone MAC of the laptop to the router to get the connection with Comcast, has done that with network cable connected, internet connection worked well after cloning.

  -no virus SW installed.

  Any suggestions on what might be the solution here? Thank you.

  Hello

  It seems that something is blocking the wireless to connect to the wireless router and to obtain a valid IP address.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Impossible to change the network location of the public in the network and sharing Center.

  I'm unable to change the network location of the public to the private sector or at home. In network and sharing Center, he is listed as unidentified network, and under "Public network" is written in black and is not clickable.

  I have a connection high speed (USB connected) also listed above under "Home network", it is written in blue and is clickable.

  The affected connection is an XBOX 360 connected via a network cable. I wish to connect the XBOX to the Internet via ICS, but cannot do so until this connection is either private or at home.

  Things I've tried so far;

  Reinstall the drivers,

  disconnect and reconnect, turning on all the elements concerned.

  All ideas,

  Tourist shifty.

  Enable ICS on the connection Strip and not on the XBOX 360 connection.  When you do this, the connection of the XBOX 360 will still be confused with a public network, but everything should work. Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows XP (SP3) refuses to allow the addition of "Network Service" as a user of the service DCOM.

  DCOM error 1016 Windows XPx32

  Several solutions, all virtually identical to this question:

  Machine default permission settings grant Local Activation permission for the application server COM with the CLSID
  {A4199E55-EBB9-49E5-AF1A-7A5408B2E206}
  the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20). This security permission can be modified using the Component Services administrative tool.

  However, the error persists;  Windows XP (SP3) refuses to allow the addition of "Network Service" as a user of the service DCOM.  The question was supposed to be fixed in a service pack, patches, etc., but he persists.  This despite the change permissions to allow that user permissions in HKCR | CLSID. {"clsid :} or HKLM\Software\Classes\AppID.

  Now what?

  Hi Ronegade,

  I suggest that you follow the steps in the article mentioned below.

  The event 10016 may be logged in the system log on a computer that is running Windows XP Professional x 64

• Help with error of unidentified network and Teredo Tunneling

  Well guys, this one's a doosey! My computer has recently lost my internet connection and it gives me the network not identified when I try to connect to my WiFi.  I looked into it and found a couple of things different.  One of them being that the Teredo Tunneling driver in my network drivers does not (code 10).  I tried to do a few things to correct what I found on other resources, but they did not work.  At this point I don't know what to do, so I could use some help!

  Here's my ipconfig/all, if this can help!

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\Owner>ipconfig/all

  Windows IP configuration

  Name of the host...: Allens-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt #2
  Physical address.... : 9C-4E-36-3C-86-29
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 9C-4E-36-3C-86-29
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel Centrino Wireless-N 2200
  Physical address.... : 9C-4E-36-3C-86-28
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e999:dc2e:1673:3164% 13 (Preferred)
  IPv4 address: 192.168.0.100 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Monday, October 13, 2014 21:27:44
  End of the lease...: Tuesday, October 14, 2014 01:01:19
  ... Default gateway. : 192.168.0.1.
  DHCPv6 IOOKING...: 362565174
  DHCPv6 DUID customer...: 00-01-00-01-19-25-C7-9A-DC-0E-A1-FC-AC-FD

  DNS servers...: 192.168.0.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)
  Physical address.... : DC-0E-A1-FC-AC-FD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  C:\Users\Owner >

  Hello Allen,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble connecting to the internet. We will certainly help you with the same.

  I would like to know some more information on this issue to help you better.

  Remember to make changes before this problem?

  In the meantime, please follow the following suggestions to solve the problem.

  For questions related to the unidentified, network please follow the suggestions of Nithyananda J and see if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Also, try to Reset Winsock and see if that helps.

  1. Click Start, all the Programs\Accessories and click right on command prompt.
  2. Select ""Run as Administrator " to open a command prompt."
  3. In the windows command prompt , type the following commands:
  Restore the default install WINSOCK entries: netsh winsock reset catalog

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer. This should help.

  For problems related to network card drivers, where you get an error code 10 in device properties. You can try to follow the steps mentioned in the link below:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  https://support.Microsoft.com/kb/943104?WA=wsignin1.0

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• 'Unidentified network' after every reboot with Windows 7

  Hi guys,.

  It seems to be a large number of people with this problem and a multitude of suggestions on how to fix it. I had no chance.
  So far, I've tried everything, including the quite this long list here (excluding those of the 'method III' that I'm working through): http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/windows-7-loses-my-network-and-becomes-an/7b305de9-3793-4c32-b9da-a1f83d6a57b2

  I am running Windows 7 Ultimate and my network card is an Asus USB - N13 which has drivers updated.
  As the title says the issue of the "unidentified network" occurs whenever I restart the computer. It's interesting when when the computer "connects" to my wireless network but is on an 'unidentified network' of my router do not see. Not totally sure what to do this.

  If it helps two temporary fixes, I found iinclude:

  Reset stack TCP/IP as follows (taken from http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/homegroup-network-disappeared-on-desktop-replaced/258ca60f-d2bf-41f5-a37a-ff391d64e0d2)
  
  a. click the Start button, type cmd.
  b. now in the result of research with right-click on cmd.exe and selectrun as administrator.
  c. Enter the following commands, one at a time, and press ENTER:
   
  ipconfig/flushdns
  nbtstat-r
  nbtstat - RR
  netsh int Reinitialis
  netsh int ip reset
  netsh winsock reset
  
  d. restart the computer.

  As well as the removal of the network, uninstall the network driver and restart the computer.

  Patches above must be reapplied the next time I turn on the computer much.

  This question is particularly annoying for me because I plan to use the computer as a server without a head but I can't connect to it remotely because of this problem.
  Any help would be appreciated. See you soon.

  Try to disable IPv6 on this card and see if that helps.

• Windows 7 Pro - unidentified network domain PC connected Via Ethernet

  Hello - we have several machines Windows 7 is joined to our domain.  Recently when move us a PC from one place in the building to the other and connect them to wired ethernet, they get the 'unidentified network' and it shows as 'public '.  If plug back us them on their original network node, it works very well and finds the network, no problem.

  I did all the deforestation of the intellectual property, the command netsh, updated drivers, etc., but does not know what is happening.  Nothing has changed on the switches.  If I move a Windows XP computer, it works as expected.

  Thanks for your help!

  Hello jrennard3,

  Welcome to the Microsoft Community Forum.

  These computers are connected to the domain network, the question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the TechNet Forums :

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you.

• Unidentified network Windows 7 Ethernet or wireless work

  Question: Good so I have a computer that refuses to access the internet/local network. It just says: a Public unidentified network (which it isn't) other computers work fine ive tried to take it to a completely different network and tried to use a wireless card. No dice. Ive tried "netsh" orders, all the commands ipconfig. manual setting of the address of the network card in the advanced configuration of the network card. its an IBM all in a thinkcentre a70z and a realtek PCIe GBE adapter. Oh, I also tried the delete route 0.0.0.0, but it says that it cannot do. ive tried uninstalling the driver and put it back in place for the Web site as well as allowing windows 7 to install manually. ive tried to assign a static ip address. It drives me crazy. His car is not an address ip of the dhcp and ive manually adds the gateway address. any suggestions before I chuck this thing out the window?

  I don't have the service Hello or quicktime.

  I do not have a virus

  I deleted all of the antivirus

  I disabled IPv6

  It turns out that it was the motherboard and it had to be toggled with me.

• Additional physical network adapters on host VMware ESXi 3.5

  I would like to add additional physical network cards to host VMware ESX 3.5 (update 3). I installed two PCIe Intel NIC (E1G42ET) server for the HP ProLiant DL 380 G5 server. Both NIC cards recognized by the BIOS of the server.

  After you connect to the VMware VI Client I can't see or add new maps.

  In addition, new non-visible material in the host ESX console.

  You are not sure if the drivers of NETWORK interface card must be installed manually?

  Hello

  VMware ESX is NOT Linux, there a GNU/Linux management machinery... ESXi is not even there a device for managing Posix. Drivers for Linux won't work with ESX or ESXi. If the card is not without the HCL for ESX/ESXi, then it won't work with ESX/ESXi. Usually not in list HCL implies VMware doesn't have a driver yet for this card. All drivers must come from VMware ESX and ESXi recognize the hardware.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  SearchVMware Blog: http://itknowledgeexchange.techtarget.com/virtualization-pro/

  Articles of blue Gears - http://www.itworld.com/ and http://www.networkworld.com/community/haletky

  As well as virtualization at http://www.astroarch.com/wiki/index.php/Virtualization Wiki

• Satellite L850 - unidentified network, try to use the LAN card

  I have the Satellite L850 and were using the wireless without any problem.

  Now I find that I can't get the network to work just by using my Ethernet cable.
  I tried to turn off the wifi and allowing the PCIe realtech family responsible of the treatment, which is the connection to the local network, but I get unidentified network.

  Y at - it a sort of conflict between wifi even if it is disabled and the connection to the local network.
  I'm pulling out my hair. The LAN worked very well until I decided to try the WIFI.

  Hello

  The unidentified network problem may be related to different causes, and therefore different workaround solutions may be possible.
  First of all I recommend you to uninstall the network adapter driver.
  This can be done in the Device Manager. After the driver has been removed, restart the laptop and install the network driver that you can download on the page of the Toshiba driver.

  2nd solution: reset the reset TCP/IP protocol
  To do this, see the article Microsoft Knowledge base:
  http://support.Microsoft.com/kb/299357

  Check also if you tools of security (firewall, antivirus software, Mcafee) n does affect network connectivity.

• Unidentified network Local Access only on Vista Home Basic using Ethernet.

  Have 2 laptops not identified network Local Access only on Windows Vista Home Basic.  One is a Toshiba and the other is a Dell.  I can use the Ethernet on the Toshiba to one of the The Fire Dept. I work at. (From lastweek, haven't checked since.)  I can't go to the other Station.  Get Local access to the unidentified network only.  I get also home and when I checked the Dell, get the same message.  I can connect wirelessly.  How can I solve the unidentified network problem?

  Hello

  If your system is running Hello , Netmagic or any other party 3rd network try to uninstall.

  Try also.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type route delete 0.0.0.0 press ENTER.

  Type ipconfig/flushdns press enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET