Networking & sharing

Similar Questions

• Y at - it an instruction step by step to set my network/sharing

  Hello

  Y at - it an instruction step by step to set my network/sharing

  I have a desktop Imac 21.5 on the LAN and a macbook 13 "pro on wifi

  I'm using DHCP

  El Capitan osx

  I can see every computer in the finder and can access

  However I just can't in files

  Tony

  There are a few things to put in place.

  You access the Macbook to the iMac or put in place for the Macbook can access the iMac? Or both?

  Her are a few step by step to try.

  How to connect with the file sharing on your Mac - Apple Support

  http://computers.tutsplus.com/tutorials/a-beginners-guide-to-OS-x-file-sharing--Mac-53206

• Results of Toshiba Connectivity Doctor or Vista network & sharing Center

  I bought a 802.11n router to allow additional coverage of my Toshiba with a 802.11n Wireless WiFi Link 4965AGN give me and I never seemed to get the extra than I expected! I tried etc. Since a few weeks I got the laptop, and was beginning to lose patience and hope of ever is it solved, however I just noticed something that only confused me even further!

  I always use the connection to a network/network and sharing centre within Vista OS under my control, "connection status" of my networks etc. & it has never showed that the network which should give me ' isn't a 'g '! But earlier I found and used the Toshiba connectivity doctor, and I found it is sometimes shows the connection as a 'n', but still the Vista "connect to a network & Vista network and sharing Center" show the same broadcasting as a 'g '!

  What should I take as the most accurate, I have little additional coverage when I used to have a portable 'g' and a router 'g', but perhaps remotely an additional 2 meters which, depending on how wonderfully better is the "n" does not seem to live up to the expectation!

  I based my results of the exact coverage, physician connectivity Toshiba or Vista network sharing Center, they can be opened at the same time and showing the different results? I do not understand why they say different things? Crikey Ca? s driving me crazy!

  Hi friend

  already tried INTEL drivers? Theres a special broadcast of the site just about your wireless card, so if you please, visit this site and download the drivers from here:

  http://support.Intel.com/support/wireless/WLAN/4965AGN/

  Maybe it s just a driver related problem. And another suggestion: use a single program to connect to wireless networks. Maybe they cause some internal conflicts in the system which turns off the feature n.

  Oh, and Don t forget to check the properties of the device manager/network on some technical parameters. Perhaps, it must be explicitly enabled, also on your router.

  Welcome them

• Are published network shared variable write & read Atomic actions

  Hello

  I have a very basic question about shered (published network) variable.

  I think I know the answer already, but since I couldn't find in my documentation, I thought that it is more prudent to request...

  Are reading and writing on a shared variable of stocks Atomic?

  To be more precise: on my target real time I create an array with data (each element being the configuration item or a cluster containing name, value, and type) and when the table is finished I am this store in a published network shared variable.

  On my host (Windows), I'm voting (in a loop) until the table contains at least 1 item, when this is true I'm parsing all the elements in the table.

  Is there a chance that, reading of the shared variable, the table contains a subset of the original painting on RT target (i.e. the action of reading takes place while writing is still ongoing).

  Or is the action of reading delayed until the write is completed? (i.e. both write and read actions are atomic even over the network)

  I think the latter is true but not could find no evidence in the documentation.

  Kind regards

  SoC

  Hello Rob,

  Yes, you can access the entire value, data type - you use both. For the table data type, the integer value is actually the full picture. So, Yes, you can see reading and writing as Atomic actions.

  But, on the other hand, you can lose data if the RT system rewrites the variable before the host had the time to read. To avoid this, you can enable buffering for the variable. See the following links for more information:

  http://www.NI.com/white-paper/4679/en

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/buffering_data/

  Finally, you can also activate a FIFO RT on your target RT if you need to send data through the variable in a deterministic section of the RT. See also, more information:

  http://zone.NI.com/reference/en-XX/help/370622H-01/lvrtconcepts/rt_projectvariable/

• Passing an array via one RT FIFO network shared Variable, Code error-1950679034

  This should be simple.  I'm just passing through a table via a single RT FIFO network shared Variable element.  And yet I get nothing.  How could - not working?  What is this error?

  

  Well... it must have been some sort of thing calendar because adding an expectation of 100 ms fixed it straight up.

  Now don't feel ridiculous

  

• network shared variable treatment

  Hello everyone,

  Someone tried to link data from a network shared Variable to the query (running in a smartphone or Tablet) made with "treatment"? I know on the dashboard of data but I would like to know if West someone working with these two technologies. Thanks in advance for your answers, comments, suggestions, etc.

  Hello Bene

  Apart from the dashboard of data there are other technologies that you can use for mobiel applications in LabVIEW

  If you already use a shared Variable, then the easier and faster way to connect your mobile device and the PC on the same network and then simply use DataDashboard to read from your published variable.

  You can also create your own thin clients or http Web pages and link to labview, send sms, share a front panel to distance between computers

  Here is a link where you can read all about it

  Cheers and good luck

• Trying to turn on network sharing and discovery, I get the message 'the specified service does not exist as an installed service' I am running AVG internet security 2013

  When I try to change the networking of sharing and discovery, I get the above message.  I don't quite know what to try to fix the problem. Any thoughts would be helpful. Thanks in advance.

  Hello MarkPogue,

  Thank you for the question!

  I'm sorry to know that have problems you with the network sharing and discovery. "As I understand it, you get an error message" the specified service does not exist as an installed service ' trying to turn on network discovery.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Answer to us if you are having problems with the network discovery or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• I am connected to the internet, but my network sharing Center proclaims that I'm not.

  The paradox connected but not connected

  I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.

  Any help would be greatly appreciated. Thanks in advance.

  Hello

  1 reboot as often, this allows the refresh icon and also stops a few things of
  interfere with the slot troubleshooting process.

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
  It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
  update the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT.

  ---------------------------------
  Other tips:

  If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
  Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
  double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
  complicated because there's probably more than one single thing, the origin of the problem)

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the evil network device.
  You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

  Still a problem of equipment such as a loose network card that is not properly attached to the computer can
  cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Media Player Network Sharing Service missing in Windows Vista

  I use Vista and WMP11.  I have all the Vista and WMP11 installed updates.  I'm trying to set up the sharing and noticed that the Windows Media Player Network Sharing Service is totally absent from Services.  I ran the Vista System File Checker and it did not help.  How do we install this service?

  Hello
   
   
  1. have you made changes on the computer recently?
   
  I recommend you do a system restore to the previous times and check if that helps. I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Player network sharing problems

  Hello

  I operate a laptop Gateway using Windows 7. In recent weeks, I started receiving messages saying "Windows Media Player Network Sharing Configuration Application has stopped working and needs to be closed." After this, another message appears asking if I want to report the problem to Windows. This happens about once every 5 minutes or so, even when the Media Player does not work. If anyone has experienced this problem and is there a way to fix or disable this feature of sharing media player? Thank you for your time.

  Patrick Taylor

  Hello patrick1210,

  Sorry for the delay in responding to your message.

  In the views of others with the same question, it seems that maybe that's a problem with the file mf.dll.
  Some have been able to replace the file.

  A few suggestions:
  (1) run SFC to see if you have corrupted system files.
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  (2) register the dll from the command prompt. Go to a command prompt, right click and select 'run as administrator '.
  Regsvr32.exe mf.dll

  If please reply back and let us know if this helps with your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Media Player network sharing service uses 40% of my processor

  Hello

  I bought the HP P6270IN with win 7. everything is perfect, but... I have a problem... media player network sharing service uses 40% of my processor . I do not want to use WMP library. Please advice how to solve this problem.

  Parth

  Hi Parth,

  Welcome to the Microsoft Answers site!

  You use the Windows Media Player network sharing feature?

  If you use this service while the service is required to operate to check computers or network devices with which you share your music. This service also index/updates of the library that is shared.

  If you do not use this service and still is using the CPU you can change the type of start up manual (which is to be launched by the user).

  To disable the service temporarily

  1. opening the Services Control Panel, or type services.msc into the start menu search/run box.

  2. double-click on Windows Media Player Network Sharing Service, and then change the service to Manualstartup.

  This has now disabled temporarily the service unless you manually start the service. You can restart the computer and check if the service has been stopped and the CPU usage was down.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I do not network, why windows media network sharing service Player use so much CPU? Can I disable it?

  Both strange, I get a message telling me that at least 1 cpu runs at 100% usage and that the Windows Media Player network sharing service is responsible even if Media Player is not running.

  Hi Martin

  If you do not normally share media with other devices or on a network, I would recommend that you turn off Media Player Network Sharing Service .

  1. open the Control Panel / Administrative Tools / Services.

  2. in Services, scroll the Windows Media Player Network Sharing Service and double click above to open it.

  3. click on the stop button. In the drop-down menu Startup type , click disable .

  4. restart the computer for the change to take effect.

  Let us know the results.

  Concerning

• Networking & sharing on Windows 7

  I have an office with FP7 (win764bit & 32-bit) & have wired broadband to a single pc. I want to share files & internet on the PC, I have some technical knowledge on configuring IP addresses on pc, but still want to seek advice from the community.kindly guided me step by step follow the steps.

  also please know me what devices are necessary for sharing tastes switches router or another. Sorry for the bad language thaks & I will very much obliged the community if done in my favor

  Hi Citycc,

  Thanks for posting your query in the Microsoft Community Forums.

  I'll be more than happy to help you on the networking & sharing on Windows 7 computers.

  I suggest you to read useful articles and check if it helps.

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Windows Media Player Network Sharing Service or a service it depends on failed to start. (Windows 8)

  A problem occurred recently in which I can't stream my music from WMP with other devices in the home as my Xbox 360 group. It has always worked well and this is the first time, it's happened. When I tried to connect my PC to the Xbox, my PC has appeared on the list, but when it connects a reason any. I then went to my PC to make sure that everything was in order. I open Windows Media Player and watched the streaming options. Everything was going in order, except that the media from my computer was turned on not a reason any. I clicked on ' turn streaming media on "and it led me to the page of the control panel option. It reads simply "media streaming is not enabled" (as well as usual and precautions which not). I clicked on the button below "streaming media turn on. This is where my problem appears. Loads of my computer and nothing happens. I tried a few times and he told me then that the title of the question says. He then invites you to me to go to the service administrator tools. So I did and I went through the list of services until I found than the one titled "Windows Media Player Network Sharing Service. He was not running although it should be automatically. I clicked on it and press start and it says "Windows cannot start the service on Local computer" with error 1068: the dependency service or group could start.

  If anyone has a solution I would be very happy. I tried to be as complete as I could in the description.

  I had this problem as well, with 8.1 widows.  On the Dependencies tab, I had two components, the HTTP Service and Windows Search. I found that Windows Search has been disabled.  I don't know how it's spent, but allowing him to corrects the problem.

• Inside cold clone VM network shared in ESX4 drive

  Hello

  I converted Unix machine using CLONE COLD with Vmware Converter 4 autonomous process in shared network drive.

  HOWTO import now this new virtual machine to the network shared in ESX4 drive?

  Why did not you use converter to import comments directly into your environment of ESX4?  You can map a drive to your PC for the network share where the files, then use the browser data store and 'download file '.

• Qosmio F50 - 125 Local network sharing problem

  Hello

  Recently I installed windows 7 and downloaded all the necessary drivers for my computer toshiba laptop. The problem is that I can't access the computers in my home network and others cannot see my computer. I am connected to the network with a cable and a Wi - Fi connection, but often the wireless is down while the cable connect to the internet. Over the radio, there is no problem - sharing works properly, but the cable only the above mentioned problem is changing. On "View full map", I don't see that with my computer, a BIG QUESTION MARK, and the internet. I installed the LAN Driver, but there is no difference.

  I would be grateful if you can help me with this problem.
  Thank you in advance.

  Seems that you have found the solution yourself ;)
  Thanks for sharing this with us!