New Apple Airport Express - I just swap out with my old?

I use the old version, Airport Express, so I'll update to the most recent (reconditioned Apple).   Can I just replace the old with a new one, or what I need to reconfigure in public services from the airport?

If I have to set it up, can someone tell me dumbed down how?

Thank you

It is always better to start with the default factory setting when the replacement of base stations.

However, if both base stations are 802.11n models, you can use AirPort Utility to set up the terminal 'new' to replace the older one. If this is the case, you can just power the new base station, and then select its Wi - Fi your Mac network. Doing so will give you the opportunity to run the AirPort Utility. Just follow the steps automated to replace one with the other.

Tags: Wireless

Similar Questions

  • The Apple AirPort Express Base Station is a good solution?

    I'm moving so leaving the wifi station that Verizon gave me. I think I have the Apple AirPort Express Base Station by station WiFi. I connected an iMac (main computer) MacBook Pro, iPad, iPhone.

    My main question is how this used for the WiFi base station compares to others on the market.

    Thank you!

    Johnny

    The AirPort Express has limited the ability of speed due to its slow and limited capacity wireless Ethernet port due to its very small built in WiFi antennas.

    However, if the plan of your new Internet Service Provider (ISP) is limited to about 50 Mbit/s, then the Express would probably be OK if most wireless devices will be located near the AirPort Express Terminal.

    If the budget allows, an AirPort Extreme is a much better product... up to 10 times the speed of the Express... with additional WiFi antennas located just above the 'tour' to improve performance.

    If your new ISP plan is 100 Mbps or higher, then AirPort Extreme would be a better match.

    If you are considering other routers from other manufacturers... we cannot comment at all on their performance without knowing the number of brand and model of the device you are considering.

  • Laptop stopped seeing Apple AirPort Express

    Hello

    I'm having a problem with the Wi - Fi with Apple Airport Express (http://www.apple.com/airportexpress/). Windows XP on my laptop Toshiba Satellite M70-339 PSM77E this is crushed about 4-5 days ago and since then he stopped to see the network Airport 4 days ago (but it can still detect the other networks). I think something in the network settings changed on my laptop. That's what I have:

    1 there is Airport Express Mac and a PC laptop Toshiba Satellite M70-339 PSM77E with Windows XP Home Edition.

    2 mac sees the Airport network (and some other neighborhood networks). It is connected to the Internet and it works fine.

    3 laptop with Windows XP stopped seeing the network 4 days without any reason (but it can still detect the other networks of neighborhood, so the material is activated and it works). I had the network works for about 6 weeks. When I first tried to find the network (about 6 weeks ago) I had the same problem: the laptop could not see the network, but then I worked I had a few other internal network settings in my laptop after I removed it, it detected the Airport network. I even used Express Admin Airport utility (or sth like this) to set the WPA security for our network.

    4. to solve my problem now, I tried almost everything I found in apple.com forums and some other related forums this issue, but it seems that this problem is usually solved by chance.

    5. I tried to repair the network connection (by selecting repair in the settings), I removed the networks all the favourites, I had, I disabled all firewall, I tried with different laptop computer IP configuration (I know that he doesn t have nothing to do with the detection of the network, but I was frustrated). I even updated my WiFi drivers and the laptop cannot always detect Airport network (However it can see all the others who are in the region). There is no interference between the laptop and the Airport (the problem doesn t also depend on the distance between the laptop and the device).

    Please give me suggestions. Don't forget the laptop used to detect the network without any problem, and the Internet worked well.

    See you soon,.
    Jakub

    Hello Jakub

    You will be very happy if anyone has experiences with Apple Airport Express and can offer a concrete solution. After losing question have you tried to roll back OS to an earlier time using System Restore tool?

    When the OS works well and stable it is always good to create system restore points or do some sort of backup image. I do this all the time and I'm not worried if something goes wrong.

    Sorry, Jakub, but if you can't find an answer or solution on the apple forum I really don't think you will find it here. The fact is that the WLAN card works, but how to set it up with Apple Airport Express. I don't really know, but as you said already, maybe you need a chance.

  • My new Apple TV 4 is extremely slow compared to my old Apple TV 3. Same router but worse performance. Can anyone help. Thank you.

    My new Apple TV 4 is extremely slow compared to my old Apple TV 3. Same router but worse performance. Can anyone help. Thank you.

    How slow.

  • I have a new Apple and made a Migration of Applications. data etc old Apple Apple again. Creative cloud gives error re damaged and to download and install again, however, after doing this installation starts but keeps giving the same error re C

    I have a new Apple and made a Migration of Applications. data etc old Apple Apple again. Creative cloud gives error re damaged and to download and install again, however, after doing this installation starts but keeps giving the same error re file creative cloud. How to solve?

    Uninstall, use the CS cleaning tool, and then reinstall.

    Adobe Creative Suite Cleaner Tool allows to solve the problems of installation for CS3 thru CS6 and creative cloud

    http://www.Adobe.com/support/contact/cscleanertool.html

  • How do you connect a (very) old Apple Airport Express to a new Airport Extreme network?

    For Bob Timmons:

    I have 2 old airport expresses, an old and one even older. The network home fled the old Express (connected to a modem), who abandons the connection several times a week. The older Express seems quite dead. What I want to do is to increase wifi coverage in my house (no wifi in the kitchen or the 3rd floor). I buy an Airport Extreme to manage the network, hoping that it would provide wireless coverage in my blind spots. Then I could use the former, Express work next to my stereo to listen to the music of my iMac.

    However: the new airport utility shows but does not interact with my work Express. If I buy one extreme and put in place, how I can add the Express network. I downloaded 5.6.1 (and launcher) Airport utility, but don't know if I can use 6.3.6 to implement extreme and 5.6.1 Configure Express.

    Any thoughts on this would be welcome.

    Sorry, I forgot to ask: even if the Airport 6.3.6 utility on the iMac refuses to 'see' the Express, would be the iPad method you mentioned work with an older Express?

    The model numbers of my expressed are:

    work: A1084

    a death: A1264

    Well, if A1264 is dead, it is the end of the discussion on this model.

    A1084... assuming it works... could probably be used for AirPlay, but the A1084 calls this AirTunes.

    The A1084 is at least 9 years old, probably older and the average useful life of an AirPort Express is about 3-4 years. It is amazing the A1084 to work at all, but school drop-outs you see now with the Express indicates that it is heading for the South, he may not be around much longer.

    If you want to try using the A1084 Express, it can be implemented and administered using an older version of AirPort 5.x on a Mac or a PC utility. No matter which version of AirPort 6.x...or.. utility. AirPort on an iPhone or iPad utility may NOT be compatible with the A1084 Express.

    If you are considering a new AirPort Extreme... and... or buy at Apple, so you have one day 14 return privilege on the product, if it will not do what you want, you can return it for credit or a return.  The older A1084 expected to collaborate with the new AirPort Extreme if you spot a version 5.x of AirPort on a Mac or a PC utility to configure the product.  But... saying "should work" is not the same thing as saying "work"... then it will be one of those moments where you won't know how well... or even if it will work until you try.

  • connect older apple Airport express with ethernet cable modem? Verizon service

    I'm helping someone with a verizon DSL modem older (guess this isn't wireless vs) which connects to a tower of Windows, then usb out of the tower to a unit of wireless to connect to a recent Mac laptop version. We would like to get rid of the tower and the verizon usb "hockey puck" and simply use the modwm > wireless Airport express > laptop.

    If I get an airport express, I can show the modem directly to Airport express?

    Yes, that should be fine.

    Tell us what model is the DSL modem.

    There are two possible configurations.

    Either the type pure or bridged modem and you use customer PPPOE over the WAN to the Express.

    Or

    You have a modem router and you will implement the express bridge, with creation of a wireless network.

    HOWEVER... I'm NOT either of those without call verizon and control on the price of a new wireless adsl router modem.

    ADSL has changed little in 10 years... but the equipment does not last forever. It could just be the perfect time to move.

  • My new Apple ID was used just on my ex-husband's iPad?

    Things have acted funny on my phone (specifically text notifications, i.e. the red dot with the number and the sound only intermittently through... then when I look later (sometimes after I see I have a) I see there are messages there I have not seen yet, as in new ones that I never informed (note) (: I have my banner notifications disabled because I always found those annoying - also note all my settings were triple checked and fine).  After reading things here about software spies and all other defects General, I upgraded to 9.3.3 and then also decided for an additional measure change my Apple ID and password just in case.

    The next day, I got a pop-up message that says "your ID Apple is now used for iMessage on a new iPad.»  "If you recently signed in [insert my ex-husand iPad name here] you can ignore this notification"-it gave me the ability to hit "ok"... Obviously, I have NOT signed in, I don't have it in my possession but knows it does.  We used to share an Apple ID, that's why I changed it.  Could he have used the (shared) old an and I still received this notification even if I signed is more inside?  I think I can be disconnected on my phone now because it keeps prompting me to sign in my other, but I am hesitant for some reason any.

    He knows that I changed it because he put me out on it too... long story about it, but I asked him why, I received notifications and his story just does not match me.

    Any ideas would be greatly appreciated!

    To change the Apple ID go to the following location under settings, log out of each of them and then reconnect:

    iCloud, iTunes and App Store, Messages, FaceTime, and Game Center if you use it.

    Perhaps you have not changed your ID in each of them and this is the reason why you receive this message. It also wouldn't hurt to change the password as well, but if you do not repeat the above.

  • Apple Airport express records is not on the wifi network

    HI, I bought an Apple Airport Extreme new several months and I haven't connected my Airport Express so far. For some reason, the Airport Express is same does not record on the network. I unplugged for several minutes and plugged in. I don't know if there may be a software update that I missed?  Someone had this problem?  I would be grateful for any help. Thank you! Chuck

    If you have not reset the Terminal AirPort Express to settings by default and then set up again to extend the network provided by the AirPort Extreme... so now may be a good time to do this.

    As it is, the Express is not "appear" on your network because it has not been provided with the settings to do.

    If you need some advice on how to get the Express running... we will need a little more information from you as follows:

    (1) your AirPort Express Terminal has two Ethernet ports... or... does he have one?  If is has one, we need to model on the side of the unit number. It starts with an "A" followed four digits.  For example... A1264.

    (2) AirPort Express Terminal will connect to the network using a permanent connection to the Ethernet cable wired to AirPort Extreme... or... the Express will connect wireless?

    (3) what device you use to configure the AirPort Express Terminal?

    (4) If you have a Mac, we need to know what operating system they are running. If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.

  • Can iTunes be listened to using non-Apple (Airport Express/Extreme example) devices?

    Hi guys, my first question to the forum and hope you can offer some advice.

    One of my friends would like to extend his network wi - fi wireless and listen to their iTunes library throughout the House. It has a large router broadband modem/hub and BT Infinity2. I was going to suggest linking an Airport Express and Airport Extreme solution to install broadband from BT, but in the case where it is costly to use non-Apple devices to stream music from iTunes?

    Any help greatly received.

    All my best

    Wuidar

    can I use non-Apple devices to stream music from iTunes?

    Much would depend on what device you want to listen to music to. Is - this AirPlay device is capable?

  • Apple AirPort Express Base Station (MC414LL/A)

    Is the base station Airport Express MC414LL/a I see on Amazon today the last edited by Apple? I have a very old (over 10 years) I need to replace. Thank you, owen

    Yes.

    (138952)

  • I've just updated my billing information on a new map of credit due to a problem with my old and Adobe immediately charged me for €1

    So after that I had a problem with my credit card and could not be charged, I've just updated my billing on a new credit card information.
    Just as I saved the new billing information, my banking application tells me that I am charged €1 by Adobe.
    Is - to check if the credit card details are valid?

    Because on my overview of the Adobe account, I always get the advice to update my information, also the €10,70 for my photography plan has not been charged.


    Any suggestions?

    I already solved it myself, my banking application displays validation bookings, that of other apps.
    If it's just a validation.

  • Out with the old WinXP box in with Win 7 - recognition problems 2008 Server box

    Our box office WinXP was finally cut off (the last, all the others are Win 7).  I built a new area of Win 7/64 with Windows 7 Professional.  I was able to transfer all the old stuff from WinXP on the server by using the parameters of conduct transfer agent.

    I plugged the new Win 7 box and everything works fine.  However, I can't get our Win 2008 Server to recognize the new box.  User dave is there but the server does not see the new box.

    Q: should I remove user "dave", and then reinstall a new "dave" at the server level?  Seems that I would lose settings, etc. like this.

    I've been going through Hester and Henley on Admin book, but nothing comes out with me.

    If you have configured Active Directory, then you should be able to join your domain from the Windows 7 machine as you would for Windows XP. Please note that you may experience problems if your Local network connection is firewall, as well as temporarily disable and try again.

    http://www.notebooks.com/2009/11/11/quick-look-Windows-7-in-the-workplace-joining-a-domain/

  • out with the old and in with the new

    my old warrior, the a6440a is dying like Cleopatra... slow and theatrical... I don't mean to save the inevitable final spasm

    HP processor intel core 2 duo

    E 4700 @ 2.6 GH

    2 GB OF RAM

    HARD DRIVE 500 GB

    32 bit 'vista '.

    my interest is in the hp 200q series.

    first of all, what are the options would you choose? I like the video and photographic works... my only big is windows 7 Professional...

    my backup on western digital external hard drive will be useful to transfer data to the computer in windows 7?

    can the "virus program" transferred from the old machine to the new one? It's all just updated by download... it is "norton".

    I would appreciate your wisdom and advice...

    oooooo, can I have your old?, I like theatricality.

    Very few emissions if everything can be transferred, they muyst be reinstalled.

    I like Microsoft Security Essentials, free and very good software AV.

    Get at least 4 GB of memory, a lot more if you change the video

    Don't know what type of backup did you? But yes, an external hard drive is ideal for moving data from 1 PC to another.

  • When I download a PDF file-it just came out with this language of gibberish gook that I don't know what to do with... what Miss me on my pc to translate that into something readable?

    Whenever I have download word documents, they come out in a computer language, I don't know how to convert.  I have adobe Flash player on my pc and tried to download adobe reader.  Please help as it is very frustrating.

    Thank you

    A pdf file (which is a file with the pdf file of letters after the dot in the filename), can be read by installing the free software Adobe Reader (remember to uncheck the box to install McAfee Security Scan) or free Foxit Reader (frequent contributors here prefer the latter).

    If you do not have Microsoft Word, you can read Word documents (files with the doc of letters or docx after the dot in the filename), by downloading and installing the free Word Viewer (read the doc files created by Word 2003 and earlier versions) and the free Office Compatibility Pack (reads the docx files, which are created by Word 2007 and later versions).  If you choose to install these applications, be sure to visit Microsoft Update immediately after to be sure to get a needed updates.

    Adobe Flash Player is not relevant to this question.

    If you have problems to install Adobe Reader, please provide more information, including the full text of any error message, without paraphrase and the version and service pack of Windows you have (right click on desktop and select properties for more details).

Maybe you are looking for

  • Re: Need drivers for Satellite M40x

    Hello I have a big problem... I can't find drivers for my Toshiba Satellite M40x 267 (PSM4XE-03401UFR).Please I need these drivers (for all... mother board driver etc. and especially for the display). Thank you, if it's possible a mail to eugenseverl

  • Axes set up being not included in the built executable

    I use SoftMotion Lite to control 4 stepper motors via an expansion chassis. When running my application in LabVIEW, everything works fine. All engines work exactly as expected and I have four lines set up the project. However, when I try to build and

  • Converter USB-Ethernet Lenovo's tab 2 A10 - 70F

    Hello I had the tablet a few days ago and I want to connect it with my router via a LAN cable using a microUSB-Ethernet Converter. Can anyone recommend such a converter, knowing that it works with tab 2 A10 - 50F? THX in advance, Michael

  • Optical drive on HP Pavilion Entertainment PC

    I had this happen a few times and the first time my techie guru accompanied me through 'reset' the optical drive by pulling on the CD tray, but this time, which did not seem to work.  What else can I do to get the machine to 'read' photo CD?  Thank y

  • How can I get the album artwork for sansa when using of FLAC

    Hello world I am archiving my CD collection on my pc and I use EAC to do. I was wondering, when I drag and drop my albums FLAC on the Sansa Fuze album art isn't here. How to configure EAC so that it will bring on the album art also when I rip CD rhe