New Aurora R5, adding 3.5 and 2.5 HDD... are provided cables?

Similar Questions

• My computor would not start windows, so I got the opption to boot with the disc. But with the TI istalled a new windows 7 on my computor and all my files are gone. How can I get the file.

  second copy of windows 7 has been installed. How can I retrieve my files from the old copy of windows 7

  That depends on the options you chose when you made the installation.  If you chose to keep your old files, you can view the folder c:\windows.old .  If you opted to install on another partition, you can retrieve the files from the old partition.  Otherwise, you would have to have supported your computer before reinstalling.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. External hard drives 1 TB are about $85 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• NewElementInHierarchy() - adding new items, gradually takes more time when adding several brothers and sisters

  With my script ESTK, users select the model numbers in the list and then the script inserts an element with a model number is entered in an attribute, an element for each selected model.

  When you add a large number of elements, each element of extra brother takes a little more then the previous item adds. Adding 250 items may take longer than 3-1/2 minutes or more. During the addition of 20, 50 or 75 items happens quickly, without any noticeable length. It is somewhere in the top 110, this is where that starts to get noticed.

  I even used $.hiresTimer and writes the value to the console for each time a model has been added. Because the timer is reset to zero (0) whenever it is called, it was easier to notice than the amount that it incremented from one element to the other got progressively bigger.

  Any ideas as to why it takes so long or reflections on what I could do to speed it up?

  The structure looks like this:

  < PartModels >
  Text < NoteText > < / NoteText >
  < model ModelNumber = "ABC01" / >
  < model ModelNumber = "ABC02" / >
  < model ModelNumber = "DEF03" / >
  < model ModelNumber = "DEF04" / >
  …
  …
  < model ModelNumber = 'XYZ01-A' / >
  < model ModelNumber = "XYZ * B" / >
  < model ModelNumber = "XYZ500" / >
  < / PartModels >

  The script is quite simple: scroll a selected model numbers table, add a new item for each model number and value of the attribute, the value of the model number. It's the short version:

  Function InsertModelElements (modelsToIns, insElemLoc, GVdoc) {}

  var newEleId;

  var newElemLoc = insElemLoc;

  var elemDef is GVdoc.GetNamedElementDef ("Model");.

  for (var i = 0; i < modelsToIns.length; i ++) { / / modelsToIns is the selected model range }

  newEleId = elemDef.NewElementInHierarchy (newElemLoc); //ElementLoc based on NoteText first, last, or absent

  SetAttribute (newEleId, "ModelNumber", null, modelsToIns [i]); //More feature robust to set the attribute
  

  / * Which also works for the layout attribute * /.

  var vattributes = newEleId.GetAttributes ();

  vattributes values [0] [0] = modelsToIns [i];

  newEleId.Attributes = vattributes;

  
  

  / * At one point, I tried to use a new location of the item to the last inserted element, no change * /.

  var newElemRange = setElementSelection (GV_doc, EleId); function that returns the range

  newElemLoc = newNewElemRange.end;

  }

  }

  Any help is appreciated.

  Sincerely,

  Trent

  Thanks Russ,

  I seriously considered trying to copy/paste and started to change the code to do it. But I could not let pass, the answer should be right there in front of me, it's all too long that I worked with this stuff, I am not able to see. Then it dawned on me what's happening.

  In a previous test, I put a timer on each action that is closed. For example, I start with a container element that has 200 children of elements, each with a specific/unique model number attribute. All the 200 existing items are deleted and then replaced with 250 new items with a different value for the attribute of model number. The timer was placed after the Element.Delete () and ElementDef.NewElementInHierarchy () methods. What I've noticed with the timer, it's that each deleted item has been removed as fast as the previous item (so it took progressively less and less time to remove an item). And of course the opposite was noted for insert items, each inserted item has taken longer than the previous inserted item.

  These elements can be inserted in two areas of the structure, one of the neighborhoods within format rules that affect the formatting and is actually a bit faster. This led me to the cause being ESD format rules. The area that takes more time has quite a few rules of extensible format that apply. Whenever an element is inserted or deleted, FrameMaker through these rules for formatting the content of elements. Given that the rules apply to the parent, first, last, next, previous, etc., FrameMaker must apply the rules of the format to all elements of the structure that the rules (which are extremely complex due to various elements, attribute values, and combinations that can be inserted).

  Removal or thinning of the FormatRules in ESD, she becomes faster. But each of the FormatRules are needed. So using app. ApplyFormatRules = false; just before that the elements are deleted and inserted works very well. But the key is to implement ApplyFormatRules return to true before remove the last element should be removed and before inserting the last element to be inserted, so it allows to scroll all the rules of format of ESD for all elements in the hierarchy of these format rules apply to. ApplyFormatRules true and assign the ElementDef until the last item works also [EleId.ElementDef = GV_doc. GetNamedElementDef (insElemType);], but only before all the other functions are performed or different items are added.

  doc. Reformat() will not reformat the content correctly after the fact, because the element has been created without the format rules, so it reformats all the contents of the elements without the format rules.

  The FDK version which was created 10 years ago had the same problem of slow operation when a large number of items have been inserted, but was still an improvement over having manually insert each item, and then type the value of the attribute, if she had lived with.

  He now works surprisingly fast. I hope that my explanation of what I think is happening, including the cause/solution, is understandable.

  Sincerely,

  Trent Schwartz

• New session started with an advertising page and all my tabs are lost

  New session started with an advertising page and all my tabs are lost. Restore the previous session is not active. How can I restore my tabs?

  Great work!

  Sessionstore.bak files are ancient, probably autour time that you have installed Firefox 33 when the sessionstore-backup folder has been added.

  To try using one or more files in the sessionstore-backup folder, here is the process:

  (1) exit Firefox and it must create a sessionstore.js from the main level of the profile folder file.

  (2) rename sessionstore.js to sessionstore.old file, or if you think that you will ever need, delete it.

  (3) copy in recovery.js or previous.js and rename sessionstore.js.

  (4) start Firefox then try to restore previous Session. Those are the tabs you want? If this isn't the case, you can try one of the other files in your backup sessionstore-backup.

  If none of the files has the missing tabs, you could try a recent Windows restore point. It's more complicated on Windows 8 on Windows 7, and you could benefit from using a third-party utility. These have been mentioned in another thread:

  • http://nicbedford.co.UK/software/systemrestoreexplorer/
  • http://www.ShadowExplorer.com/

  Or... I read on a roundabout way to get previous Versions on the Properties dialog box in Windows 8. I can't test it myself, but here's what you do:

  In the address bar of your Windows Explorer dialog box, replace the current path with the following and press ENTER:

  \\localhost\c$

  Then click at the end and nail on the following (with your user name) and press ENTER:

  \Users\username\AppData\Roaming\Mozilla\Firefox\Profiles

  That should help you in the vicinity of your profile folder. Then you can right-click sessionstore.js > properties > Previous Versions, or try one of the files in sessionstore-backups.

• reinstalled itunes on new pc and all the songs are duplicated

  r

  I reinstalled iTunes on new pc and all the songs are duplicated. How can I delete everyone else?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• How can I get my table of cross-checking the information below when a new row is added by the user?

  I created a table with two buttons, when the user selects the button Add, it adds an instance, which works very well, but there is a section under the table and the three fields.  Whenever a row is added, it overlaps with this information.  I did not allow for page breaks, but I do not get a new page.  Any help will be greatly appreciated

  Make sure that your subform Table and the subform text are contained in a Flowed subform.  In this way the subform parent that contains everything that the page is allowed to flow the content of the page.  As subform Table grows, it can hit subform text down.

  Good luck

  Mark

• How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

  How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

  Hello

  Apple has not yet announced the capacity of storage or the music of Apple Watch series 2 storage limit.

• I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I'm not

  I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I don't?

  Are you turning in the Apple device, a company or the insurer? Can you turn on the device? If so, you could try to send a command to erase with iCloud. If this is not the case, if her deal with Apple, they he will wipe away. If the only damage the screen, you don't want just the screen replaced?

• My news story 'Date added' is now gone joined upward with the SYNC...

  They are now all updated to the date of synchronization instead, and my story when I added a bookmark is lost, very disappointing... A way to solve this problem?

  Fortunately, although I used the files in my favorites and nothing in the files is still intact in the history.

  My browsing history is also date F #$$ j also all my browse history even that "six months or more" is now dated to last week when I joined sync... not happy with it.

  HI cmyachtie,
  Yes, Firefox Sync and sync ICloud currently are not compatible. It is maybe what is causing duplicates. Add the Bookmark Deduplicator can help the immediate fix. However, with respect to accidents, signatures do not have a bug that are associated with them, and there are few comments. However there was mention of an antivirus that can be the cause. If this is the case additional troubleshooting for accidents caused by antivirus:_ http://kb.mozillazine.org/Firefox: _Issues:_Firefox_Won % 27t_St...

• When I open new browser window has reversed colors and no title of the window.

  Usual - when I opened 1 window at the top of the FF of the page appear like this http://imagestun.com/hosting/kartinki/ff1.jpg
  But when I try to open something in a new window, the new window has strange colors up and no title, like this
  http://imagestun.com/hosting/Kartinki/FF2.jpg

  If I switch from window mode to full-screen and conversely, everything is normal.

  I used Classic theme Reestorer addon, but the same problem occurs when this addon is uninstalled. Restaring computer, reinstall firefox etc. nothing helped, I still get these annoying menu white letters when I try to open the windows of firefox 2 or more.

  Is it possible to fix it?

  Launch Firefox in Mode safe
  
  While you are in safe mode;
  
  Firefox Options > advanced > General.
  
  Find and stop using hardware acceleration. Then restart.
  If there is still a problem, go to for Firefox > Extensions and
  Disable all add-ons that have something to do with the display of the page. Turn it back on.
  If there is still a problem, disable add-ons more. Continue until the
  the problem disappeared.

• Migration via the time machine (old imac) to new imac done numbers keynote pages and other programms disappear

  Migration via the time machine (old imac) new done imac numbers keynote pages and other programms disappear - what is my mistake?

  You should be able to re-download your apps purchased on the Mac App Store.

• I have a new PC with Windows 10 Pro and I leave iTunes every time I gt the flollowing message. "One or more applications use scriping of iTunes interface. Are you sure you want to exit? "All help to stop this would be appreciated.

  I have a new PC running Windows Pro 10 and everytime I close iTunes I get the following message.

  "One or more applications use iTunes script interface. Are you sure you to quit smoking? -If you have nothing will close the application using the script interface and a 20 20 second timer starts. "

  I was wondering if someone can help me with a solution to this?

  What third-party software is running on your computer? Last.FM is one that comes to mind.

  TT2

• my default browser is igoogle. someone has used my PC but now when I open a new tab, it goes to bing. and I hate them. I don't know how to restore it.

  While google is my default search provider, and my home page is igoogle, when I opened a new tab, it goes to bing. and I hate them.
  I can't find how to set the new tab 'igoogle' - or even 'white '. simply no bing!
  Thank you

  I won't be using Bing intentionally. It seems that there is no other choice. It keeps popping up.

• New tab and close tab buttons are not enabled

  Firefox new tab page and close tab buttons are not neabled and do a right-click shows the same functions that is not available.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• Why the Firefox 4 is not restore all the sessions that were open at the time? Before the update, I've been invited either ("SAVE AND QUIT") or even if she closed UNEXPECTEDLY (crushed), he AGAIN restored. New version does not offer "save and exit".

  Question
  Why don't Firefox4 restore any sessions that were open at the time? Before the update, I've been invited either ('SAVE AND QUIT'), or even if it closed UNEXPECTEDLY (crash etc) it STILL restored everything. New version does not offer "save and exit".

  Now, Firefox always stores the old session which you can access from the history menu by selecting "restore previous Session."

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.