Camera shots come out black

Similar Questions

• I am trying to print the color of the CS6 PS and it comes out black and white. How can I fix it?

  All other Adobe applications print correctly.

  Check your settings in the printer driver dialog box.

  If you send a color image on a color printer, Photoshop sends color.

  The operating system or the printer driver are the only things that could change the image in black and white.

• scanning color photos come out blank and blach k

  My scanner is an all-in-one photosmart 5520 and when I scan color photo they come out black and white.

  I am a pensioner and not very computer but think it must be something to do with settings, can someone please help. Thanks a lot Shirley01

  You must have somehow set it or choose a mode that is black and white only. How do you scan? Computer or printer with the ' scan to '? If from the computer, which is the type selected? If the printer are you scan a document or photo, pdf, pdf seachable etc? If of course, change the setting and see if the colors come out?

• iPhone 6 pictures come out completely black with flash on

  Why my pictures come out completely black when you use flash? Even if I take a picture where there is light with the flash they come out completely dark. The phone that I'm having a problem is iPhone 6 and iOS is updated. What is apps that are the cause of the problem? Or is it a hardware fault? Ive tried resetting the phone, uninstallation of third-party applications and made sure it wasn't the phone case causing the images to emerge from the darkness.

  To ensure that this isn't related software, set it back to the factory, using iTuns on your computer settings, as explained in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Configure manually the personal data, do not use the last backup or install 3rd party applications. Then test the camera without any or the protective film attached.

  If photos are still hurt, it's hardware related and the phone must be repaired by Apple.

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• When I scan on my Dell AIO Printer A940, the image comes out all black in my images.

  What I am doing wrong? Sometimes, it works very well with the wizard, sometimes it comes out all black and I don't do anything differently. Not sure if this is the right forum, but I would try thinking. Thank you!

  You save all the scans in the same format?

  Just guessing... but as the problem is intermittent, I would be
  I wonder if you have problems with scanning photos
  low contrast to borders... it might cause on board
  detection for failure and the scan are not optimal.

  Try to use the following steps to re-scan a photo
  that failed and you can have a different result.

  Place the picture in the scanner and go... Photo of tasks.
  Get pictures from camera or scanner...

  When the wizard starts... next left click...

  On the... Choose Preferences screen scan... left click
  the Preview button. Because of the automatic selection with precision frame
  frame the picture? If not... you can adjust the left selection
  Click on by dragging the dotted lines.

  Also... try scanning only one photo at a time.

  The site has a lot of info on digitization.

  A few scanning tips:
  http://www.Scantips.com/

• When I want to copy or print from the scanner on my HP4500. It comes out all black.

  See above

  There is no paper on the scanner screen - the message says that it is

  Hi @OKC,

  I see by your post that when scanning, they come out all black. You also receive a message that the paper is on the scanner bed where there is none.  I can help you with this.

  I have provided a document to make a reset of the printer, the scanner, the lid and ADF glass cleaning.

  Reset will most likely solved the problem. Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  Do not take into account the title.

  If the problem persists, please update the firmware of the printer. HP Officejet 4500 All - in - One Printer - drivers G510g.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• I want to know why when I restart the computer and save it that I restart the computer came out black background

  I just want to know why every time I restarted the computer I save then come out of the background is black, I put the f1 not the way I had before why now I guess that something is missing can fix you it for me please

  Hi linsugr,

  Do you know when this started?  The simplest solution because I have no idea of what is happened to cause this is to restore the system to a point BEFORE this problem started (and give it a a few days to be sure).  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try to go back a little further and see if you are met with success.

  I hope this helps.

  Good luck!

• How to find my product key Windows 8 if it came pre-installed on my Hp laptop. I want to upgrade to Windows 8.1 when it comes out.

  I would like to install Windows 8.1 when it comes out in August. According to Microsoft:

   http://Windows.Microsoft.com/en-CA/Windows-8/Preview-FAQ

  You must have your product key to install 8.1. My laptop came pre-installed with it and I don't know where to find. I would not use 3rd party applications. I know how to get into my CMOS and that's all. Thank you.

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

• Keyboard comes out on my new Thinkpad Edge

  My wife has just received its new Thinkpad Edge (0196-26U 13 "screen, Intel processor, matte black). While not as energetic as our boosted T61 or T400, it is much lighter and adapts to its needs.

  Most of the keys on the keyboard feels good, but our model seems to have a flaw. The upper right corner of the keyboard tray pops out regularly. I can click it back in but there is a visible bulge and with a slight flex of the body it comes out back. In addition, the right side of the END key is depressed compared to the rest of the keys.

  I provide Lenovo today to inquire about a replacement part.

  Anyone else having this problem?

  Received the replacement keyboard today (the day after). It was a simple swap out. The original was clearly misrepresented in the upper right. The replacement unit has a millimeter to give in the same corner, but the framework comes out with an audible 'click'. Not perfect but does not interfere with my typing.

  The keyboard is attached to the frame by tabs at the front and two screw centered on a third of the way left and right. This keeps most of the keyboard firmly in place, especially in the middle where you press the small head of gum. The corners are only kept pressed by the rigidity of the frame of the keyboard. Thus, given any incompatibility with the chassis, there got to be some give.

  That's life I guess.

• Satellite A100-237: S-video/RCA-out black & white

  Hey everybody,

  I'm * tent * to connect my laptop to my TV via the s-video on my A100-237 output, unfortunately the (PAL) TV is old enough and the only entrance is RCA so I got a RCA s-video cable. The picture comes out in black and white, and I changed the settings on the TV and PAL video card settings. I heard that you need to activate "composite synch" in the properties of the monitor/TV connected in order to get color on s-video/RCA output, however I can't this setting in the properties of the TV in the ATI Control Panel.

  I looked everywhere for info with this particular problem and spent hours playing with the settings of ATI but cannot get color output.
  If someone else has had a similar problem or know of a fix that I have not been able to find? Or is it maybe the ATI drivers?

  The vga adapter is an ATI Mobility X 1600 512 MB hypermemory, linking the reverend newer drivers from the toshiba site (8.241.0.0).

  Hello

  I have never tested S-video to RCA connection yet, but as far as I know the problem is the TV and no cell phone. The same situation can occur with standard S-video cable and S-video port on the TV must be activated. In this case, the color will be ok.

  Sorry, but on this path, it is not easy to write something concrete.

  Good bye

• OfficeJet 4500: office jet 4500 pages come out blank

  I have a hp Office Jet 4500.  Lately when I print only blank pages come out.  It is still ink in the black cartridge, so I cleaned it according to the instructions from hp (printer only in manual mode). I still get blank pages.  I guess I have to buy a new ink cartridge, because sometimes they dry out before they are empty, but now I'm not sure that's the problem.

  This may seem a stupid question, (I don't know the correct names for parties), but is the bar with light, supposed to go under the glass when she prints?  I lifted the hood to see what was wrong and I noticed it wasn't moving, even if the light was on.  I never paid attention to the printer while it was working properly.  I would like to know whether to fix it before I have to waste money on an ink cartridge.  I know that the digital display informs you if there is a power outage, but it didn't.  Otherwise, the printer goes through its motions normally.

  Hello @epona1 , welcome to the Forums of HP!

  I read your post on how your Officejet 4500 is print is no longer with the ink to print outs. I want to help you!

  The bar with light I think you describe looks like this mechanism to scan, which does not move when you make prints, so I don't see that the question. The question seems sound, as for me, would be the printhead to the printer. I say this because you have tried to change ink already and the pages are always feel empty, when normally change the cartridge would help and fix this type of problem.

  Having said that, I suggest that try you this guide and try the steps it will list. It may possibly fix the problem of blank page for you. If not and the problem does not go away, call us directly to discuss your printing with HP options.

  The problems of print quality for the HP Officejet 4500 all-in-One Printer Series

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  

• LexmarkX1270 of acts that it was printing but the paper comes out blank.

  Since the installation of a new black cartridge in the printer, it works as it was printing but the paper comes out blank.  I tried to reinstall the drivers of cleaning cartridge.

  Let us know what happens after you try with another cartridge.

• When I print, the printer sounds like its printing but nothing comes out on the page. What should do?

  I just installed an hp F4480 printer, my roommate gave me.  My OS is Windows XP.  When I try and print or copy something the printer looks like it's printing and the paper passes by like it is printing but nothing comes out on the page.  Perhaps is out of ink, I guess, but I don't know how to say and I don't want to spend $50 to get a new non-refundable ink cartridge to see.  I did a print test page and the only thing that came out was a light that said the Page of Test printer Windows XP Blue cap but nothing else was on the page.

  It's really a problem of HP, not a Windows problem, and you should look for the HP Support help site.

  However...

  One of the lights on the printer are flashing?  There are 2 'estimated ink level lights' on the front panel.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01673672&tmp_track_link=ot_faqs/top_issues/en_us/c01673672/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 3742086

  Genuine HP ink cartridges are installed?  The cartridges have been completed?  How long did it that the printer is correctly printed?

  When you installed the printer, you have installed the "HP Toolbox" application (or you simply download and install the basic printer driver)?  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3742086#N44

• Windows stops after it comes out of hibernation.

  For some reason it stops when the computer comes out of hibernation. He does this only when I don't do anything with the computer immediately after that it go to the desktop. I guess like 5 minutes away she just stops while I am not. When I turn it back on, it always starts in the same condition it was when it entered hibernation. What could be the problem?

  It is by design.

  When XP comes out of hibernation, XP expects it to be a reason he came out of hibernation.  If XP comes out of hibernation and can't find anything ' to do' it resumes hibernation by himself in 300 seconds (5 minutes).

  This feature is built in case your system is equipped with the hibernation of some external event like a networking event, etc. and you don't want that, she will automatically return to hibernation.

  If you move the mouse, press any on the keyboard, etc., which is considered to be something, so XP knows you're here, and it will not automatically resume the hibernation.

  What do you see or you try to do something and hibernation occurs while you are busy?

  You can read a little about the functionality of XP here:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;318355

  If you don't like the way it works, I know only a workaround solution that is to your system from a shortcut on the desktop or in hibernation, and then using a third party application batch file so that when XP comes out of hibernation, the mouse movement is simulated is enough to satisfy XP thinking that any human being moved the mouse and it will not rehibernate.

  I can tell you a way to do it if you are interested... after the understanding that there is really nothing wrong.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• My Dell is power saving mode and will not come out

  My Dell is power saving mode and will not come out? Any suggestions? I can't get anything else than a screen that says it is in power save mode and press a key or move the mouse. No one who does nothing. Don't disconnect.

  Hi Ma32206,

  Monitors Dell will automatically mode energy saving after a predetermined time amount when the computer is idle. The Dell monitor will go completely black, rather than display a screen saver. This allows your monitor to essentially turn off until it takes again.

  A. Press any key on the keyboard or move the mouse. Either will automatically turn off the power saving mode. Alternatively, you can press the power button on your Dell computer tower or laptop.

  B. press one button a second time if the monitor goes power saving in standby mode. Standby mode allows the screen saver appears.

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.