New DELL 1 TB SATA 6 GB not recognized by DELL SAS 6/IR controller

Similar Questions

• Installation of XP Prof on Tecra A9 PTS52E - SATA HDD is not recognized

  Hi all

  I have a "nine" Tecra A9 (PTS52E) with Vista Business installed. However, I need XP Prof and a CD of XP - SP2 slipstreamed. The SATA drive is not recognized XP installation, so I need a driver of "F6."

  There are a lot of howtos on this for the 945 chipset, but I couldn't solve this problem on my A9 (Mobile 965 Express Chipset). I don't want to buy a USB floppy for one-time-installation drive. So I have to build the driver (iastor.sys and more) in the XP installation disc.

  A few problems: there seems to be no easy way to do this, because intel only provides files *.inf for the ICH8R (RAID =) controller, which does not exist in the A9. So I have to change the *.inf files, correct?

  Another thing: I saw in an another post here the discussion on switching to AHCI in the BIOS in compatibility mode. I can't find a way to change this setting.

  Aargh, I need this laptop for my work on an A8 (which is also mine), I installed XP without any problem.

  Can anyone help?

  Thank you

  Michael

  Post edited by: michael-cologne

  Nice info I m interesting in the XP installation process.
  It would be great if you could post a few steps.

  Thank you

• New HARD drive not recognized by the SAS on PowerEdge T410 controller

  One of the drives has failed on my RAID 1 configuration, so I bought a non-certified dell, Seagate Barracuda 500 GB drive (other readers were 250 GB).

  I turned off the machine and swapped the failed drive with a new one (cable connections)

  When I boot in Sas (SAS 6 ir) controller, it shows that the disk is missing.

  I turned off the server and changed the cables from the primary to the new disk, to see if it would make a difference. None. Watch again ' driving status: missing.

  What I have to buy dell certified readers? I'm doing something wrong? Or is the obsolete RAID controller?

  Any help would be appreciated! My primary hardrive gives signs of failure. I have a picture of him, but I'd like to get it mirrored on my new record ASAP.

  Thank you

  Hello director87

  Go to the RAID properties > manage table > manage Hot Spare disks. You should see a list of all drives that detects the controller. Your RAID 1 drives will be listed as primary and secondary. The new drive should not be anything in the area of the 'State of the drive. Use the arrows to select the new disk and keys to assign it as a spare drive + /. After you assign it as a spare drive it should start to rebuild.

  If you don't see the drive in the list, then check the screen of the SAS topology. If you see in the SAS topology then use CTL D to shoot to the top of the additional options. Let me know if it will allow you to do something to the reader in this screen. If you don't see in SAS topology then it does not appear that the controller is able to communicate properly with this player.

  Thank you

• DELL new 1 TB drive 6 GB/s SATA is not correctly recognized by DELL SAS 6/ir controller

  I have a Dell PowerEdge R310 with a Raid SAS 6iR controller
  with a SATA 2 x 1 TB drives RAID1 volume.
  The SAS Raid Controller is a LSI1068E chipset.
  Now, I bought a new drive to replace a faulty in the RAID1 volume.
  Has bought the drive with Dell
  400-18614 1 TB SATA 7.2 k 3.5 "HD Hot Plug fully assembled - Kit
  It seems that it is a seagate ST1000NM0033.
  It is a 6GB SATA drive.
  When I replaced the defective drive - the RAID1 game not resync No.
  In fact, the controller has not see the drive. When I plugged the drive
  in another (new), the Bay, and then the controller did see the drive, however,
  it it detected as a virtual disk with only 3950 MB (4 GB)!
  Any idea if this disc is:
  -broken?
  -not compatible with / 3GB SATA?
  -needs jumpers positioned to be compatible?

  Thanks in advance!

  Hi all

  Thanks for the comments.

  However, in my opinion, the disc should work and I shouldn't waste my time at low level

  kind of things. It should be "swap-out/swap-in/resync '...

  So I called the support technique dell that the disc is not good.

  Come back my money - ordered a new one - exactly the same model - and it works very well!

  If the disc was just DOA.

  Thank you all for your time tho.

  Kind regards

  Kurt

• Tecra S3: SATA hard drive not recognized after XP updates

  Windows has recently completed an automatic update on a Tecra S3 equipped with a 60 GB HARD drive SATA.
  After the reboot required for updaates windows generates a BSOD.

  I've traced the error and found that the system can not find the hard drive.
  Even when I use the XP cd and restore/repair console without a hard drive is located.

  When I check the BIOS hard drive is there.
  I removed the hard drive and used an external case and determined that the hard drive works fine.

  Hello

  Tecra S3 supports RAID.
  In order to install Win XP RAID driver is needed!

  The RAID driver can be found on the European driver Toshiba page.
  It s a v 1.01.0005 for Win XP.

  You can include the RAID driver using nLite. This free tool allows you to include the RAID driver in the Win XP disc.
  Google for nLite for more details.

  Welcome them

• Still waiting new firmware and now my computer is not recognizing my opinion.

  Well, I sent the service to the customer, without promising real response to indicate when, if ever, the new firmware has to be stopped.

  In the meantime, a week ago my computers started to not recognize my opinion market, including a few error messages that I had never gotten before in Windows Media Player 10.  I followed the steps described in the Sansa support FAQ section.  Tried emailing sansa. Today they tell me to roll back Windows Media Player 11 for Windows Media Player 10 (which I already use).

  The solution? Admitting defeat.  A renounced envy the rest of devices non-Sansa to my family.

  I already bailed him out.

  Bought another brand. (Rhymes with COD).  It works well. I would like to the screen were as large as the view and the wheel is not quite as easy to use the view, but those which are minor compromise in my opinion, uh, I mean advice.  Rewind crisp and precise.  Fastforwards, well, quickly (a minute of the key gets me 35 minutes instead of 8 minutes with the view forward, and there is a way to achieve even faster than that).

  So far and good luck.

• New HDD on Satellite Pro L10 is not recognized correctly

  Hello

  I changed my old hard drive (60 GB) with one of 160 GB, but my laptop does not recognize this size. It gives me only 127 GB. I updated my BIOS and update Windows XP SP3 home edition
  I also tried with partition magic. The curious thing is that sometimes, it happens that partition magic sees the 160 GB, I can extend the size of 127 to 160 GB and I can create an additional partition (drive D) of say 40GB.

  When I copy data from this partition I get an error and stops just my laptop.
  After the restart, he says that he cannot find an operating system.

  Can someone help me please?
  Thank you

  Hello

  I'm afraid there is not much to do. Entire HARD disk capacity knows correctly or you must accept that the BIOS can't handle with this HARD drive. This model of laptop is almost 4 years and I can imagine that there is a limitation in the BIOS.

  Maybe you should be happy with 120 GB of HARD drive. And the 160 GB one, you can use as external HARD drive.

  One more thing: have you noticed any functionality problems after installing SP3?

• HP DVD A DS8A9SH SATA CdRom Device not recognized by my laptop

  All of a sudden, my laptop does not recognize my CD / DVD player

  What can I do?

  HP laptop with windows 8.1 455 OS

  Hello:

  Please see if the steps following resolution 2, 3, 4 or 5 to solve the problem.

  Normally, one of them will.

  http://support.Microsoft.com/kb/314060

• Dell Precision 5400 - Problema aggiornamento firmware RAID LSI Logic for Dell SAS 6 iR controller

  Assistenza Tecnica Dell company,

  only recently ho avuto disco SAS Seagate Cheetah 15 K, pertanto it SAS controller mi segnalava che degradazione of the proclamation of the United Nations of the UN problema del Volume sul quale era misconfigured it suddetto disco.

  Ho labor-intensive UN uguale disco, stessa marca e modello e versione firmware (S527) di quello nel present RAID 1, recoupling the configurazione del nuovo volume non e consentita, perched there controller individua it firmware del nuovo disco como S52A instead S527, come scritto anche nella targhetta present sul disco stesso.

  Conseguentemente, pensando che if trattasse di one problema al legato firmware led controller (SAS 1068E FW 0.20.48 - IR) sono stato web sulla pagina Dell, del supporto relativo al oggetto Office (serial number: ), ho aggiornamento di downloaded it pilot, my film camera durante he message:

  SASDupie.exe-> ' Impossibile find it punto di ingresso RegDeleteKeyExA della procedure nella libreria di special dinamico ADVAPI32.dll.

  A seguito di this error the TR sommergibili interrupted e quindó non e possibile procedere con controller aggiornamento del firmware del.

  In attesa di una risposta in merito, Corinne occasione per porgere Web saluti.

  Antonio Morrocchesi

  Buongiorno,

  questo forum e exclusively by server and sistemi per ricevere assistenza by it is reported (Precision Workstation) is University 02 57782690 lo.

  Speaking saluti

  Manual

• Satellite A30-514: BIOS is not recognizing the CD/DVD or HARD drive

  Hi I'm having a little trouble with my Toshiba Satellite A30 friends. The hard drive died recently, and the cd tray was damaged.
  I found an exact replacement unit and we have a new hard drive, but the Bios is not recognizing the hard drive or Cd/DVD unit.

  I installed Windows Me via my own laptop and boot from the hard drive of the computer's hard disk, but it still does not recognize the DVD even if Windows does, and it is fully operational.

  This prevents me to install windows XP, the operating system it is. If anyone can help, I'd be much obliged, too, I flashed the bios with V1.80.

  Hello

  It is the first time I heard about this issue. The Bios doesn't recognize the drive but Windows is possible use it t.
  Why suggest that peut t BIOS recognizes the drive? Is it not possible to boot from the drive?
  Check if the IDE controller is enabled and the Boot section. The CD/DVD drive should be selected and activated.

• Hp134 cartridge is really compatible with photosmart c3183? Not recognized.

  Hp134 cartridge is really compatible with photosmart c3183?

  https://h30042.www3.HP.com/SureSupply/CountryChangeSubmit.action?nav&nav#3

  Had an error with the new hp134 - copy color and cartridge blink = not recognized, full reset does not help.

  Contacts are clear.

  Black print cartridge is hp132 - seem to be recognized and it was working before the color cartridge error. But no printing is available even in black and no self test printing - when you press "Cancel" + "color copy" just "power we" blinks a few seconds.

  Hello

  134 ink cartridge is not compatible with your printer, HP Suresupply list as compatible either:

  

  The 132 black cartridge must be used with the Tricolor 136 only cartridge.

  You can also use the 131 black with the 135 color ink cartridges capacity.

  Any other combination won't work, as you can find below:

  http://h10060.www1.HP.com/pageyield/en-150/yields/PSAIOC3100_page.html?cCode=emea_middle_east

  Shlomi

• Can not get printer hp psc 750 to work with a new Dell dimension 8300

  Original title: the printer does not work

  I have a new Dell dimension 8300.  My printer is a former hp psc 750 printer scanner copier I can't print.  Can anyone help?

  Hello

  You should ask in the Forums of Windows answers corresponding to your version of Windows.

  Windows answers forums
  http://answers.Microsoft.com/en-us/Windows

  --------------------

  Check with HP Support, their drivers and documentation online and ask the HP
  forums for known problems.

  HP PSC 750 printer
  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=57769

  Drivers HP PSC 750
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=57769&

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ------------------------------

  It might be a problem with the computer as an OEM Dell provides support
  for Windows.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

• Error: Windows is not registered in the new Dell Intel desktop computer.

  Original title: old hard drive with XP Home Edition works is not on the new Dell Intel desktop computer.

  I had Windows XP Home on my Compaq Presario running athlon 64 bought 5 years ago. The motherboard died and I bought a new Dell Inspiron 620 2nd Gen Intell i3 running. So I removed my old hard drive Compaq and added to this new Dell. Boot from the Windows XP disk comes up saying "Windows is not. What to do, I have a lot of important files and programs on the hard disk of XP?

  Hi Keita,

  You can follow the links and check if the problem persists:

  Activation and registration of a Microsoft product

  Understanding activation and registration

  Hope the helps of information.

• Bought a new dell battery and still my laptop battery does not charge.

  Hello.

  I am using a Dell inspiron 1545 for about 3 years now and exactly after 2 years of my purchase, the battery has failed and it began to show me to replace the battery and always informed to contact me dell for a new battery.

  I took this to a lot of trouble, so I simply ignored the message and kept using my battery with my wired adapter. After 4-5 months of such uses, my battery has completely failed and does not give me even even a minute of backup, when I remove the power outlet. Then I realized the importance of a new battery and then bought a new battery from Dell.

  Its the same battery with the same features and also the same type family. After that I removed my faulty battery, I replaced my purchased new Dell battery and realized that my battery works fine. his load well, but at one point, it says "plugged in, but do not load" which is rare for a new battery, that is purchased new.

  

  This is what it looks like now once I removed the plug adapter and when I depend on the backup battery. It provides a backup, but I see a Mark exclamatory yellow next to her. Which I think should not be present. He also says "Low battery" when there are already some 99% battery left!

  I also followed a few steps online

  (1) update the BIOS for the last 2) followed by a few other steps such as uninstall the ACI battery in Device Manager and etc...

  I'd like to get this problem is solved. I use an adapter family PA-12, which is also replaced. So any help on resolving the issue would be appreciated.

  Thank you!

  Hey maxim. I have actually FIXED this month back, problem. and I want exactly help on it so that you can fix it yourself too...

  the problem that is the creation of your battery to display an exclamatory mark is your power settings.

  then follow these steps to get rid of this sign and a battery to work perfectly.

  1) click the icon of your battery (left click), you should see an option called "Power Options more' at the bottom of the pop-up window.

  Click on 'more power Options.

  (2) now, you will be taken to your control panel where you can see all of your power plans and under each plan, you will see an option called "Change plan settings"

  3) click on "Change plan settings" for your active power plan. Now you will be redirected to another window of Control Panel, where you can see two types of power options to get adjusted. in other words, when you battery is connected and when your battery is disconnected.

  (4) do not touch these options, simply click on 'Change power avancΘs' at the bottom left of this window. THIS IS THE AREA WHERE WE HAVE TO FIX!

  (5) after that you click "Change advanced power settings", you will see a POWER options window, go down and then you can see what is called "Stack" with a sign to the left. until it clicks.

  (6) now, you just change the levels for the following values

  --> Critical battery level (you can change it to 10%)

  ---> Low battery (you can change it at 20%)

  Now once who did, YOU will BE No. LONGER SEE THE EXCLAMATIVE MARK on YOUR STACK!

  So I hope it works!

  Answer me when you've managed to fix.

• my new Dell battery charge not on my computer laptop dell 1535 series using windows vist. and hate it.

  Help, my new Dell battery will not charge on my laptop (Studio 1535 series)

  http://support.Dell.com/

  Dell support at the link above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Contact Dell link.

  As a new Dell battery, they will be the ones to contact for any problem with him.

  See you soon. Mick Murphy - Microsoft partner