Still waiting new firmware and now my computer is not recognizing my opinion.

Similar Questions

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• I accidentally hit start diagnosis when I was in msconfig and now my computer will not go back to a normal startup

  I tried to close some startup programs in msconfig and key to start diagnosis and now my computer don't return to normal startup,

  Try this:

  Start | Run | Msconfig | OK | Law tab

  Select Normal startup

  Click on apply and OK.

  Reset.

  For later use, there are methods generally better than using msconfig to prevent programs from running automatically at startup. Generally it is best to run the actual program and then enter the preferences to do this.

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• My Cac card reader worked for a week and now the computer is not recoginize... told me that it is not connected?

  I installed the drivers and the correct software.  My computer has accepted the CAC card and it worked fine for about a week.  I tried to use today and the computer does not even recognize the card CAC reader was plugged.  I käpt asking me to ensure a card reader has been sonnected.  I tried to run a repair on the software, but that doesn't seem to help.  I rebooted the computer several times and even tried other card readers.  I could use some help.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. did you check the card reader with another computer?

  4. you use external USB card reader or the card reader integrated?

  I suggest you to follow the steps and check

  Step 01:

  I suggest you follow the steps from the link below.

  a. click Start, click Control Panel.

  b. click on system and security.

  c. click System, click Device Manager in the left pane.

  d. click the adapter card reader device, right-click on the adapter.

  e. tab driver , click Uninstal.

  f. click ok when you are prompted.

  g. now, go back to Device Manager and click Scan for hardware drivers.

  It automatically detects the drivers.

  Note: If the drivers are not found, then I suggest you to download the new drivers from the manufacturer's website.

  Step 2:

  I recommend you to update the drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in Device Manager, look for the device and then double-click the device name.

  c. click on the driver tab, then click on set to update driver and follow the instructions.

  See also: hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• I downloaded service pack 3 Windows XP and now my computer will not start, what should I do?

  I have an old computer that I was not really to help and now I would use it for my son for doing homework, typing and some internet research.  I'm trying to update as much as possible.  I can only turn the computer in safe mode after I installled XP SP3.  Any suggestions?

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  then

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

• Laptop had motherboard replacement and now Windows 7 is not recognized as authentic.

  Laptop computer had mother board replacement and format hard drive.  Store replaced windows 7 starter edition, but it is not recognized as authentic, help!

  Heh - I know the feeling :)

  Ok...

  Click on the early roundel

  in the search box, type

  SLUI 3

  and press the Enter key

  This starts the wizard change the product key.

  Follow the instructions.

  The key you need is on a COA sticker that is attached to your machine - for examples, see http://www.microsoft.com/en-us/howtotell/Hardware.aspx

  It is in the format AAAAA-BBBBB-CCCCC-DDDDD-EEEEE-FFFFF

  Do not enter dashes - the machine that will do this automatically,

• I changed to a new modem, and now my speakers do not work, I unplugged and back is connected.

  My modem is gone blouie and I got a new modem installed by my provider, since this has been done I have no sound coming from my speakers, the power light is on, I unplugged them and they plugged back, still no sound, help!

  Hello

  Perform the following methods and check:

  Method 1:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-XM/Windows7/tips-for-fixing-common-sound-problems

  Also run the fix from the following link and check.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Open the troubleshooting of Audio playback
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Let us know if it helps.

• I did a system restore to recover an uninstalled program and now my computer will not sleep.

  I tried to fix it when you restart the computer, and that doesn't seem to work. Running out of ideas! Help, please!

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• I recently changed my ISP sky broadband and now my computer does not connect. Why is this?

  I tried all possible ways to connect this computer again to wide band wireless, but it does not connect. All other computers in the House connected without problem.

  Hi Joesafe,

  What exactly happens when you try to connect? You receive messages or error codes?

  You can read the article and try the steps to solve the problem:

  Windows wireless and wired network connection problems

  You can also get in touch with the broadband provider for help on the issue:

  http://helpforum.sky.com/

• When you try to install Windows XP I deleted some unwanted partitions on my hard drive and now my computer will not start.

  original title: file system

  Finally, I tried to install a new xp on my pc, I had to remove some unwanted parttions and trying so I deleted some system files and its caused me

  problems with my laptop will not start again.

  I try to boot from a cd, but it keep posting so tat files cannot be copied. to restart and boot from the system itself is not also possible.

  I got a copy of my xp on a USB but I can't get my laptop to boot from it

  I need help badly thanks

  pc files cannot copy

  Cannot copy the Office

  Win87.em

  Win_dos-chm

  Windows.hlp

  WinHelp.exe

  WinHelp.hlp

  wininstP.chm

  WMIC.chm

  wmifltrlW.chm

  wmiscmgr.dll

  windW.chm etc.

  Sonyvaio11, xp professional

  Hello

  not all motherboards were Boot from USB active

  Make sure to set the ot of CD/DVD drive USB key to be 1st in the boot order to boot from the XP disc

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to clean install XP

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  ___________________________________________________________

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Yes I installed service pack 3 on the computer and now my computer does not have a cdrom in the bios or were for this matter__

  Yes, when my computer is its service Pack 3 update, my computer did evidence the cdrom in the bios or had other

  Device Manager... can be empty after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices... After you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Moment of idiocy: I deleted some files on Sansa and now my Sansa is not recognized by WIMP

  My sansa screen got cracked and in a fit of anger (I know it's immature of me, but my blood sugar was low) I deleted which, in my view, are the root files (in Windows, it's an icon that is dogearred and has file .dat or .cable for example) which allows my Sansa is recognized by the WIMP.  In addition, because of my idiocy that my SansaUpdater does not recognize that my sansa e 250 v2 is no longer recognized as being installed, what should I do?  I'm a stream?  I have the latest firmware, so this isn't the issue.  How to get back my files root?  Now I can't put any music on the player as the chicken does not recognize the drive

  I found a way to get my e250 recognized by chicken.  WIMP recognized a flash drive, I got in my computer and I downloaded music to it, and then I dragged music dropped from the flash drive to the sansa.  I did this about two times and then WiMP recognized my sansa.  Wonders never cease.

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.