New graphics card, the warranty?

Similar Questions

• p6745f: new graphics card does not start

  I have a HP P6745f I decided to update my graphics card because the default map is not compatible with Adobe CS6. So I bought a new power supply 600w and a GeForce 750ti. The PSU works fine with the original card, but when I put the new graphics card, the machine does not start. Just of is located on the blue screen and beeps every minute or so.

  I've scoured the forums and tried the bios update, but that did nothing. Any ideas?

  Ericz, welcome to the forum.

  750ti GTX requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer is released in 2011.  The latter does not demand of UEFI cards were 640 GT.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Get a new graphics card for the HP Envy 700-214

  Hello

  So I tried to get a new graphics card for my HP Envy 700-214, but I'm not aware if this map is compatible or if it would have a negative impact on my system.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-750-TI/specifications

  I don't want my system to be harmed in any way.  Here is the link to the computer.

  http://support.HP.com/us-en/document/c04100558

  Thank you!

  Wolfking98, welcome to the forum.

  Here is the video card manufactured by EVGA.  It shouldn't harm your system somehow.  However, if you have trouble with the installation, you can contact their Technical Support (1-888-880-3842) or online.  They were very useful for me.  Read the reviews to see what users have to say about it.  As you can see, there are a lot of comments and appreciation 5 eggs.  You can't do better.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Pavilion p6 - 2020t: HP-Pavilion will identify the new graphics card

  Hello

  I got a HP Pavilion for a few years now and never updated my BIOS (not that I know well). I'm trying to install a new graphics (gtx 750ti) card and the computer does not recognize it. It shows the first screen, and then a black screen and a beep, then it crashes. Keyboard does not work, cannot get into the BIOS.

  I tried everythign with current BIOS, boot legacy and ensuring that the Integrated GPU is disabled, and nothing works. I also did research on food, and but it is not terrible, it should work with this graphics card (the fan even spinning).

  According to my research, the current BIOS is simply not recognize, and I need to update. My current version is: FRIEND 7.16, 05/10/2011

  I navagate through the HP website and it said that the automatic update should update the BIOS for Windows 10, and it won't let me download all drivers (although the last BIOS update was 2011). I tried to enter the FRIEND's site and download it from there and it won't even install their drivers, it says that flash is not supported (probably for Windows 10).

  If someone could give me an idea of how can I get a newer version of the BIOS for my motherboard, it would be much appreciated as I'm pretty sure that's the reason why the computer is not recognizing the new graphics card

  The risk is that the video card is one that is for a newer PC with an EFI BIOS. That's why the empty card is not recognized.

  If you use a card equipped with a switch on the virtual card allowing the use in legacy and uefi BIOS it will work with the BIOS of your PC.

  Sapphire makes video cards that have this capability. Take a look at the catalogue. What you need is a PCIE x 16 card video with switchable legacy\uefi BIOS or legacy support, but not only UEFI.

  http://www.sapphiretech.com/catapage_tech.asp?cataid=8 & lang = eng

  You cannot change the type of BIOS that your PC has in the UEFI.  It's a question of his being of a generation of diferent from the PC.

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• HP ProLiant ML310e Gen8 v2: impossible to activate the new graphics card

  I need to install a new graphics card on a HP ProLiant ML310 Gen3 of v2 server as edge one is a failure.

  Card - EVGA GeForce 8400 GS

  During the installation startup BIOS hangs after the initial check (100% / no errors) and remains at a black screen indefinitely instead of forward to the ProLiant logo boot before windows.

  Therefore, I am unable to enter the bios to enable the PCI 16 slot.

  Before the system LED flashes red at this point.

  Any help will be appreciated.

  Hello:

  You can also ask your question on the Business - section ML servers HP Support Forum.

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VV9KLDjbLGg

• Pavilion p6 - 2120t: Windows will not start with the new graphics card

  Installed a Zotac GT 740 profile down in my desktop PC graphics card HP Pavilion p6 - 2120t and now the PC does not start.

  HP Pavilion p6 - 2120t CTO desktop PC

  Configuration:
  Intel Pentium CPU [email protected]
  4.0 GB RAM
  Intel HD Graphics Driver version Family: 8.15.10.2291 dated 27/01/2011
  Motherboard: IPISB-CU (Carmel2) (1 open PCI Express 16 expansion slot pins)

  BIOS to Version 7.18

  Running:
  Windows 7 Home premium 64-bit w/service pack 1
  Two monitors (VGA, 1 digital port 1)

  Before installing the new graphics card, I replaced the power supply original 300w with a 400w power supply.

  For starters, I disabled the onboard graphics in Device Manager. Then, I opened the case and installed the GT-740 in the open PCI Express slot. I made sure that the card was fully engaged in the slot.

  I plugged both monitors to their connections voted on the new map.

  When I tried to boot the PC, the digital monitor displays the screen HP (the one that indicates which key support to achieve the start menu) and then frozen. No other entries of key or mouse have been accepted.

  The PC then sounds 4 short beeps (about 10 seconds between each beep) and then a long beep before turning off the signal to the screen.

  Then, I removed the new graphics card on the PC that starts then. I have reactivated the original graphics drivers and the PC then worked normally.

  Tried the above process two more times with the same results.

  I then went into the start menu to look at the BIOS. The menu of the BIOS shows two options:

  > Sources of boot UEFI

  Windows Boot Manager

  > Sources of boot legacy

  ATAP I CD/DVD player

  SATA2

  Hard drive

  SATA0

  Network controller (Realtek PXE B06 D00)

  PC using UEFI Boot Manager Windows boots normally

  I have not tried Legacy Boot Sources because I don't know which one to choose.

  I went to the HP site and looked for an update to the newest BIOS, but updating them is a rev version 7.16 while my PC shows my BIOS to version 7.18

  I know that others have had a similar problem but I have not seen a solution that works for my PC.

  Any advice would be welcome.
  Thanks for your time.

  Hello

  Your PC isn't spec'd to run Windows 7 using the Windows Boot Manager.  I expect to a UEFI-based graphics card likely to work on an HP PC that does not have a BIOS version 8.

  The below listed OEM HP, graphics cards should work in your PC using a normal non - UEFI W7 and W8 installation.

  

• Is satellite A10 - possible to install the new graphics card?

  Hello

  I have a videocard Satelite A10, 2.2 Ghz, 712 MB of RAM, provided with your computer.

  I just bought the Sims 2 and thought from the specifications that I would be able to play on my current card. However when I try to run it it gets to the intro screen and then hangs when it is ready to go into the Menu. My first impressions are that I don't have a pretty good graphics card.

  I need a 32 MB T & L capable card so can someone confirm if this is why it would not work on the system.

  If that's the case I'm looking to see if it is possible to install a new graphics card on the machine I want to play more games to date.

  the map I'm looking at is Sapphire ATI Radeon 9600 XT 256 MB AGP8X graphics card. It will work on the machine and it is likely to solve my problem?

  Thank you

  HI Jeff,

  In General, it is not possible to change the graphics card in your laptop. This is because the graphics cell are generally not a component separated (as with a normal PC), but generally a specific graphic chip attached to the motherboard so make the graphics a part of the laptop.

  At the same time, the graphics driver is normally a specially modified version will omit some of the more esoteric aspects of the normal driver to minimize the risk of overheating chip since it does not have its own cooling system. Given this, you will find probably than trying to load the latest graphic website manufacturers drivers (Nvidia, ATI, etc.) will not work, and you will therefore be limited to these pilots provided by Toshiba on their Web site.

  In order to get your copy of the SIMS 2 to run you need to omit or reduce some of the graphics settings in the game itself, or alternatively, you can try to use some of the graphics third-party drivers that are written to provide some of the omitted features of the original notebook drivers. Note that if you do that there is no guarantee that they won't cause your overheating graphics chip, even if I used the ATI Omega drivers for some time now without any problems. You can get them: -.

  http://www.OmegaDrivers.NET/

  Kind regards

• HP Pavilion HPE: PC does not start at the top with a new graphics card installed

  I improved my diet to 600w and my new graphics card is a asus gtx strix 960

  My older gpu was a Geforce GT530.

  I've updated, drivers and BIOS of this HP Forum... and then I turned off my pc, took out the 530 and replaced by the 960. I start up the PC and it's me stuck on this screen. This photo is of online, that's exactly what mine looks like well. When I press "ESC to start menu", the screen goes black. the GPU and all good works. my version is v7.16

  

  only reason why I bought it was to play The Witcher 3...

  any help?

  calviiin wrote:
  

  Hmm. Looks like I won't get that. It's just another card that I purchase and its more expensive than the 960 gtx that I just bought.

  Thanks for the help.

  Don't, don't. It will be brick. They are also 2 completely different mobos. One choice is to buy a new motherboard or a new pc.

• Stuck on the HP logo screen after installing new graphics card.

  I installed a new graphics card today and I'm stuck in the loading screen. My old card boots gts 450 my computer very well, but my new graphics card cannot. I replaced my old diet with a 600w power supply, and it worked fine with my old card.

  It's my computer HP Pavilion h8-1210 = http://www.amazon.com/HP-Pavilion-HPE-h8-1210-Desktop/dp/B006VG0HNM

  I tried to install the latest version of the Bios with no luck. I guess it is the motherboard, but I'd be happy to work around that.

  Danny

  metall909,

  If you use an EVGA 760, so your question is probably a vbios into the video card.

  HP PC delivered after November 2012 are pretty good at speed on the last level of UEFI version. This level begins to version 8.

  I met problems with EVGA 760 UEFI and ASUS claims it is a vbios video card problem and EVGA says this is a motherboard problem.  I would not recommend using this card until EVGA releases an update of the vbios.

  If you are in a situation of pointing finger between HP and EVGA.

• How to install the new graphics card due to the absence of HDMI Port

  I have an old laptop, and I want to connect it to my HD TV. Problem with that is that I don't have an HDMI Port. I noticed on a similar question that you responded that it might be useful to consider the insertion of a new graphics card. As I have never opened a laptop before, I was wondering if it is fairly simple to do this, (as anyone who could do it) or if I'd rather pay someone to do it?

  You can use something like this:

  http://Aluratek.com/USB-to-HDMI-1080p-adapter-with-audio

  or Google "USB to HDMI" of many other and different price ranges. Don't forget to look at the comments of consumers before buying something like this. They all promise of greatness, but I'm sure few deliver.

  SC Tom

• Pavilion HPE - 533 sc: installed new graphics card. Hard drive stops

  In order to improve my graphics performance for games that I invested in this graphics card:

  NVIDIA gtx 950, links shows the map and specifications:

  http://gadgetsngaming.com/2015/08/21/nVidias-GTX-950-at-160-easily-beats-750ti-in-1080p-gaming/

  How fitting the screen stops at initial HP logo and "press ESC to start menu.

  I can also clearly see that disk hard fails or starts the Windows 7 Edition operating system home premium.

  I am running Nvidia GT 630, and back on this card machines works well again.

  It just loks like the new graphics card prevents the hard drive to run.

  All attached cables (power cable 6 pin) and locked firmly into the PCI slot.

  Is it possible that the new card draws so much power that it prevents the hard drive of the race?

  When you press ESC, it seems that the hard drive is registered in the Bios.

  This nvidia gtx 950 is better? It seems to be more the size of the one I have - nvidia GT 630. Link shows specifications.

  http://videocardz.com/NVIDIA/GeForce-900/GeForce-GTX-950

  *

  First of all try to help me, please do not write that I should get a new machine - I thought that, despite this current have worked without any problems for 5 years now.

  Do not forget that I have to install a lot of programs and to transfer other data - it would be nice to avoid this.

  If if can not be fixed - which stationary HP desktop computer (I have a laptop) can have the new nvidia gtx 950 mounted?

  http://store.HP.com/us/en/PDP/desktops/HP-envy-Phoenix-810se-desktop-j6n64av-ABA-1

  or this

  HP Pavilion Desktop-500-585no

  Thanks in advance

  I'm not familiar with current PC for sale, regarding upgrades.  Since is considered a new HP, try looking at the list of options on the HP website.  Most higher end PC have the options that you choose before buy you, to customize the generation.  Choose a model with options that match your criteria now and notice the upgrade options - write down them - to avoid confusion later.  OR go with a customized version, but this could mean significant spending.  It is the hand off the coast between prebuilts and personalized.

• New graphics card.

  I want to buy a new graphics card. But I don't know if my motherboard or power supply could support. If someone could tell me if my computer can support?

  My computer is HP Pavilion a6098d.

  Link: http://h10025.www1.hp.com/ewfrf/wc/product?product=3379050 & lc = en & cc = us & dlc = en & lang = en & cc = us

  Thank you very much.

  HNH, here is a link to the "Product information" pages for your computer:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=29354 & LC = on & DLC = in & CC = US β = en & product = 3379050 〉

  The specs do not show the power of your diet, but from what I have seen that it is very probably 300W.  HP is not known for confusing their computers.  You can upgrade the video card, but it will be necessary to upgrade the PSU, probably also.

  While you're there, if you haven't done so already, upgrade to at least 2 GB of memory would help allocate.

• I think that I need a new graphics card for my Satellite M70 343

  Hello

  I had problems with my laptop. After a start-up time specifications and give a problem with the IALMRNT5 pilot report. The laptop also gives some display problems, after a certain time, then another graphic resolution is displayed.

  I have restored the software but is not a solution and also I downloaded the drivers from the Toshiba Support Site!
  I think the graphics card to give problems.
  Where can I buy the new graphics card?
  Installed: Intel 915GM/GMS, 910MS Express smart card.

  Hello

  It s not possible to exchange the VGA card in your system, since the VGA is soldered on the motherboard (the most important thing of your laptop on which all components are on) and if you have a problem with your graphics card then you should contact a local service partner authorized, due to a hardwarecheckup or a repair of your device.

  To find the closest just check the following link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• Do I need a new graphics card

  I have a HP Pavilion Slimline s3400f running Windows 7 32 bit.  I have a HP x 2301 monitor.  I need a new graphics card to take advantage of the speed of 3 ms of the monitor?  I can renovate such a card?

  Hello

  Very nice monitor. The HP Slimline s3400f PC has only a power of 160 watts power is a big problem for the addition of a discrete video card that would allow you to use digital instead of analog video video.  You will see an improvement in the quality of the image with the digital video.

  It is possible to replace the power supply and add it to a profile low low-power video card.

  Contact Athena and get a recommendation of the PSU. HP Slimline power of Athena. There are also mini-ATX converter cable.  If you get a 220 watt PSU then the below video cards should work.

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.