new hard drive does not
Old hard drive makes strange noises and stoppage of work replaced by using the same part number for Toshiba
now when turned on screen says the smart hard disk check has detected a drive test run hard imminent failure.
Memory test OK drive hard test smart check - DST-short warning is not available. What it please help
System information hp Pavilion g6-2285sa, product no. D1Q30EA #ABU series no [under the direction of personal information].
8 64-bit windows operating systems have no recovery disk.
G6-2285SA is the model number.
There are only two possibilities. 1. you have replaced a bad hard drive with another bad hard drive; or 2. The motherboard is defective and will read all the drives as bad. Try another known good hard drive into it.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
Tags: Notebooks
Similar Questions
-
Satellite M30x - new HARD drive does not work
Hello.
I am installing a new ATA 2.5 "internal hard drive for my Toshiba M30X-166. The drive is a Seagate Momentus 5400.3 120 GB model. The laptop does not recognize the disc and no related error message appears, and in the BIOS, it shows as "HD not available."
I put this drive in an external USB - IDE enclosure and was detected by my desktop PC, and I was able to partition and format the Momentus, so I know the drive is indeed work, but my M30X still does not detect the drive.
What can I do to make the laptop recognize this unit? The BIOS M30X is: Phoenix EAL20 version 1.90.
Thanks for your help.
Hello!
Have you tried another HARD drive? The new HARD drive is may not compatible with the laptop or does work does not correctly.
Normally, a 120 GB HARD drive should work because the laptop has a limitation of LBA 28 bits and so you can only use hard drives 120 GB.
In the worst cases, the HARD disk on the motherboard controller is defective :(Good bye
-
New hard drive does not appear in the disk utility
I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.
Thank you.
You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.
-
I have a T61 with XP on it. The factory hard drive was beginning to show its age, so I got a 500GB WD Black drive for her. I used Acronis True Image to clone the old hard drive to the new. I used my counter top to do the cloning. When I plug the new disk in, the cursor just blinks and it will not start.
I thought that maybe the clone was bad, so I put the new drive hard back at the top of my desk and is able to boot all the way to the windows start screen. If I plug the old drive in the laptop, it starts very well, simply refuses to boot from the new drive.
Guessed it.
Put the new hard drive into the computer, put the old hard drive in a USB enclosure and done a CD boot Acronis, and made the clone of the laptop. Runs like a champ and now flies.
-
G62: New hard drive does not start after recovery.
I installed a new hard drive after my old a bi dust.
I ran the recovery from the discs of HP.
After formatting the disk and copy files, it won't boot from the disk.
I changed the boot order and tested the drive in the BIOS.
What Miss me?
The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.
http://FTP.HP.com/pub/softlib/software11/COL32372/ pv-80183-1/sp44645.exe
-
After the new HARD drive does not start installation Qosmio G15
I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.
Hello
I think that the boot order has been the bad HARD drive in the BIOS.
At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
Simply access the BIOS and change the boot order -
new HARD drive does not license of Windows 7
Hello
I installed a new Windows 7 HARD drive that does not accept my license key.
For more information, I ran the diagnostics report - see below-
Can you help me solve this problem?
Thanks a lot for your comments
Kind regards
BarbaraDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - 4TWGJ - TDX8V-YXFKM
Windows product key hash: 8tthKnS08isksrk7cn6HYVSKB8Y =
Windows product ID: 00426-068-1817632-86622
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {B4833878-2617-40A8-92A9-650C5D40C33A} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130318 - 1533
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{B4833878-2617-40A8-92A9-650C5D40C33A} 1.9.0027.0 6.1.7601.2.00010100.1.0.001 x 64 *-*-*-*-YXFKM 00426-068-1817632-86622 5 S-1-5-21-223448066-1245420907-1765043143 Dell Inc.. Latitude D830 Dell Inc.. A15 20100104000000.000000 + 0005FEA3007018400FA 0807 0409 Europe West Standard Time(GMT+01:00) 1 3 DELL M08 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00172-068-181763-00-2057-7601.0000-1482013
Installation ID: 021870524615236343692330733301061765598671466563870355
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: YXFKM
License status: initial grace period
Time remaining: 5700 minute (s) on (3 day (s))
Remaining Windows rearm count: 4
Time to trust: 29.05.2013 13:35:35Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 5:3:2013 15:21
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: MgAAAAEABAABAAEAAAABAAAAAgABAAEA6GEWk6tF2EFOsAYMRoNi/YylHOma5tggKoU =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL M08 APIC
FACP DELL M08
HPET DELL M08
MCFG DELL M08
ASF! REFERENCE DELL M08
TCPA
M08 DELL SLIC
SSDT PmRef CpuPmWindows Product ID: 00426 -068- 1817632-86622
The part you are interested in is the section to three digits of the number to identify the product, if it corresponds or is included in one or two digits of the examples below, you probably have a MSDN or TechNet product key. "These keys must not be sold for retail use.
065, 066, 067, 068, 069 to Ultimate, box 220 for professional and 230, 231, 232 area for Home Premium,
Note: Although that illegally sold product MSDN/TechNet keys allow more activation
(usually 5 or 10), so these keys can sold "several times" before activation may fail.= The measures you can take.
Report Conterfeits:
https://www.Microsoft.com/en-us/howtotell/CFR/report.aspxR U Legit: file a complaint:
complaints from consumers at 1-800-RU-LEGIT (785-3448)Reports of software piracy
http://www.Microsoft.com/piracy/reporting/default.aspxContact Microsoft: http://support.microsoft.com/contactus#tab0
Better Business Bureau: http://www.bbb.org/
File a complaint against eBay. Suggest that you ask for Microsoft software 'All' not allowed to be sold on eBay, because it is a constant problem. Ask the BBB to pronounce against eBay, unless they (eBay) cleans up their act.
USPS mail fraud (if the product was mail via the US Postal Service): https://postalinspectors.uspis.gov/forms/mailfraudcomplaint.aspx
J W Stuart: http://www.pagestart.com
-
Satellite M30X-165: new HARD drive does not work
Hi, I want to replace the old hard drive, HITACHI 80 GB in my Satellite M30X 165. I bought SEAGATE Momentus 5400.3 120GB but it seems that it may not be recognized by the BIOS. Anyone know what to do or what types of discs can be used in this notebook? Thanks for help.
Hello
Sometimes a bios update has solved many issues about installing new hardware.
BUT Please note: the Bios has a limitation of size of HARD drive support. Not all sizes are supported. I guess that the 120 GB are too big and therefore you can not use it!
You must switch to a smaller size. Check with a 80 or 100 GB HARD drive
See you soon
-
Qosmio G20 - new HARD drive does not work
I have a G20 and try to change one of my hard drives of 60 GB for a new 250 GB (Western Digital WD2500BEVS, SATA-150, 5400 RPM).
First thing I would add is that the hard drive is fully discoverable, formatable, and usable in my desktop... but in my G20s it only detects it in the BIOS but has a status of 'impossible' and my operating system (XP) can't quite see.
Please can someone help?
Hello
You've got a 60 GB and a 250 GB HARD drive in your Qosmio G20.
Is this good?What RAID settings do you use?
You can check the settings in the BIOS and in the user manual, you will find some details about the RAID.If the RAID is defined on the mirror then only the HARD drive would be available and if the first HARD 60 GB disk is then the other HARD disk would also provide ONLY 60 GB even if it s 250GB
-
I have a HP Pavilion zd7000 that bad on the hard drive. I bought another and used the reinstallation disc to reinstall Windows Home Edition. Everything seemed to go well, but it starts now to a HP Invent logo black screen that says press F10 to go together to the top and F12 at startup of Lan. Then, a second black screen appears that says press F1 to resume or F10 Setup. I press F1 and Windows loads very well. What can I do to have Windows load immediately without going through this? Any help will be greatly appreciated! Thank you much in advance!
EverWin... IT WORKED! I can't THANK YOU enough! I've been to every site I could find... begging someone to help me. Audit throughout the day (for a week) to see if someone had answered... tried everything! I'm so happy (and tired) I could just cry. I can't believe that you took the time to help me... I appreciate it very much!
God bless you!
-
DV9000 new hard drive does not start
DV9000 had smart hd HD replace failure did it, now, it will not boot from the cd to retrieve records. All I get is the operating system not found. Help, please
OK... after a lot of trial and error. This works.
ISO created from files that I found on the Internet for vista Home premium 64-bit
Then used wintoflash to make the stick bootable flash... fail. tried again a portable my passport HD success!. Will boot from the external drive but not a flash player. -
Satellite Pro 2100 - new HARD drive is not booting
Hello
I wanted to update my SP2100 with a WD1200BEVE. (120 GB of WD).Copy of disk via USB + speakers worked, but after changing the disc nine does not start: the laptop hangs up with blinking cursor.
Already checked that the partition is active and even a new installation from a CD of XP has the same result! The BIOS seems to accept the drive (if not installing via CD should have failed) so where is the problem?Any tips?
Hi Kannengiesser,
Which is really strange that you can t start up disk even it s recognized in BIOS correctly...
You have the Toshiba Recovery disk? If so, you can try this disc factory settings. If it works, it was just an installation problem.
But I couldn't imagine also that the new HARD drive is not working properly last week I had a similar problem. Made a HARD drive upgrade, but a few days later Windows didn't start because the HARD drive had a bad sector, now I'm waiting for a replacement drive.
-
Toshiba Stor.E Canvio HARD drive does not appear
Hello
I got a Toshiba Stor.E Canvio for about 2 years without problems
By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.
Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.
The message I get is
"Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.
The HARD drive itself is turned on, the light is on... but I'm stuck now
Any help would be appreciated
Gary
I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
http://Apple.StackExchange.com/questions/130304 -
Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!
When I try to send files to it in "send to" my hard drive does not appear
What hard drive, external or internal? Normally only removable devices appear in the mailing list.
You could use copy and paste instead, or see the following article...
http://support.Microsoft.com/kb/310270
.. how .to add items to send it to the list.
Tricky
-
my hard drive does not work, I can not download my antivirous
my hard drive does not work, I can not download my antivirous
Here are a few articles with possible solutions and its fix for the hard drive problems. Maybe at least will help any problems you encounter. I could have provided more targeted recommendations if you had provided more information about what the problem is exactly, when he started, the manufacturer, make and model of drive, how the player does not work - is that it recognized by the system, it appears in Windows Explorerr, the door opens when you press the button... If the following text does not, provide this and more information about the problem and your configuration maybe we can provide additional assistance.
Compliments and thanks to the spirit of another thread:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.microsoft.com/gp/cd_dvd_drive_problems - A Mr FixitCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
installed the updated, now all I get is server unavailable try again once could not activate
Downloaded last update got a server is temporarily unavailable try plugging your I pad for iTunes to activate if the problem persists Contact Apple support.
-
remove the my code bios administrator password is 64605597
I have a HP Pavilion g6 with a game password. As soon as you start looking for a password. I've seen other posts where you have provided a code to bypass the password. My system code is 64605597. Can anyone help with my system?
-
Cannot install SP3 - millsing PRO11. MSI
original title: error messages from PRO11. MSI I can't update SP3 due the missiing PRO11. MS1 The error messages are: MS Office Professional Edition 2003, the feature you are trying to use is on the network resource is not available, click OK to try
-
Hey guys; I'm trying to create a folder (photo album) and then to store images in this folder. In the development environment, it seems (I could be wrong) that I cannot write directly to the file:///accounts/1000/shared/camera folder to create a subf
-
No video and audio input for video has Jabber
We recorded a few video account of jabber, but they all have the same question, was unable to successfully establish a call. However, it seems to work very well for old video testimony of jabber. Can anyone help?