New ink cartridge ejects no ink

Similar Questions

• OfficeJet Pro 6830: Installed new ink cartridges on 6830, but they were not full

  I've been using this printer for about two years now, been through "Print head problem" for both, they exchanged once and replace only the part once.

  My ink colour C, M and there were emptied at the same time, so I ordered all three in an online store. I installed a few minutes ago and check the ink level via the touch screen of the printer. It turns out that they are not quite complete. They are almost full, C and are close to full, but M is less complete.

  I wonder why this happens? I never checked the ink level in the past, but it surprises me. The printer makes some kind of calibration and printhead cleaning to get ready installed ink? (So consumed little ink)

  I scanned the QR code on the side of boxes of ink and checked the hologram stickers and pretty sure that they are genuine. The printer also said that they are authentic.

  Here is the picture of my ink level. Shot after installation of the cartridge and nothing printed.

  

  Another strange thing is the date of installation. Now it is April 4 in my country but the web printer configuration page shows cartridge installation date is April 1! I checked the date and the printer and everything is OK.

  If the cartridges have been used before, the printer screen would show a message that cartridges have been used on another front printer. I saw only me because I kept the old ink before trading in the past as I said up there.

  Please see a screenshot below

  

  Everyone knows what happened? Or it's normal? (The packaging and seal in plastic cartridges seemed fine, nothing suspected weird)

  Thank you.

  Welcome to the HP Forums

  @BlackMiracle,

  I came across your post about the concerns that you have with the help of your new ink cartridges and I wanted to share my own suggestions. The date being out for a few days is a bit strange, but the rest seems normal. Yes, when you install the cartridges, they are calibrated and alignment and clean, that uses a bit of ink. The levels that you see are also "estimated" levels If there are print quality problems or error messages, let me know and I'll do my best to help.
  
  I hope this helps!

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Photosmart 7520 e: quality test ok, print faded, print new ink cartridges. In / uninstalled Adobe R DC

  My printer went from fine print only for color printing and now only copying glass screen.  The print quality test is very good, all the colors, including black are very good.  All new ink cartridges.  Recently installed Adobe Reader DC and then removed. Mini Mac OS X v10.9.

  I have to uninstall and reinstall the printer software?

  It should be written on the old software. When you are rested and ready to tackle the issue once again let me know.

• New HP cartridges give "exhausted ink cartridges" error

  I replaced the Starter cartridges in my HP OfficeJet Pro 8600 with new HP cartridges, but the printer gives me an error "of ink cartridges run out" and won't let me print anything.  I tried one of the colors replacing with 2 different new cartridges and get the same error.

  Thanks for the tips.  I tried the reset and button-pushing without result.  I had to order a new cartridge, even if mine was still full.  A new worked perfectly well.  Because I was using a genuine HP cartridge, I managed to return and it was replaced with a new one.  So, I'm back in business, even if I lost a few days of waiting for a new cartridge.

  Thank you.

• HP Photosmart C4280 all-in-one: what hp printers use ink 74 & 75? Buy new ink if my C4280 always says 'no cartridge detected ink?

  This printer has worked well in the past. It is a bit old. I used one that has a fax for a while, but after I have does not need that 1, I put this 1 upward again... maybe a year ago? Recently, it does not recognize the ink as being installed. I think I bought cartridges 74 & 75 maybe 2 months ago so that they are fairly new. I looked at the help on this forum and tried from the back and then pull the plug out for 15 seconds and connect again... no help. I read how to remove the cartridges and where the cartridges go in... no help. I even unplugged from the rear and the plug for 20 minutes... no help.

  I read somewhere on this forum without other printers use 74 & 75 ink (or was this one of them?). So if I had to buy new ink and is not the problem...?

  Can someone help me?

  Thank you!

  Hello

  The following change can help:

  http://WWW8.HP.com/au/en/PDF/HP_Printer-to-cartridge_compatibility_guide_tcm_184_1233104.PDF

  Kind regards.

• OfficeJet Pro 8600: just installed new HP cartridges and ink colors are disabled!

  It's very expensive 4 950 XL and 951 cartridges XL that I bought at Staples a couple of months. I noticed right after installation that bright red in my images were now feel like dull brown. I printed a few pages from the control panel of the printer test. Cyan and yellow seemed pretty accurate, but magenta was a deep purple, not the lightest color pink or pink, I expected. I think that something was wrong with the series production of this cartridge. I hope I can find my receipt, but if not, always wait that HP would replace a full cartridge that was flawed in manufacturing. My HP printer has an accuracy of colors great until about a week ago, but is now almost useless for the work at home that I want to do - for example custom greeting cards, cards, posters, etc.. I printed the test pages don't show any problems with the alignment of the head, and the stripes of color show no scratches. Just a magenta that is close to her correct hue, based on my long experience with color ink jet printers.

  An HP service technician spent 1/2 hour on the phone with me yesterday, and we could not solve the problem. I had already worked through the steps that you referred me to. I have never known or heard of a problem like this, and had not the technology. When I printed the Diagnostic Page of print quality, I have absolutely perfect alignment and bars very clean black, gray and colors. Yellow and cyan looked quite right. Magenta was a deep, dark - purple not magenta I am familiar with years of work with inkjet printers. But it's printed cleanly, I started to believe that the new magenta cartridge, which had just been installed as well as 3 other XL cartridges, had somehow got filled with dark purple ink. However during our tests, asked me to remove the magenta cartridge and pick up some color from around the beak with a Q Tip. When I rubbed on the print paper, it was true magenta!

  Other theories were: (1) that somehow the circuit board of the printer and print head did not and triggers the two nozzles magenta and cyan times reported magenta printing. That seems the most likely answer. 3 the theory was that the ink in the print head channels had a leak between inks cyan and magenta. It seems less likely, because there is no impurity in the print cyan, as well as the color printing was absolutely consistent over several test pages. The tech asked me to remove the print head Assembly and clean the area around the nozzles. That did not help.

  In the end, I was offered a model of printer a HP refurbished more recent than mine. The price was very reasonable - much less than the cost of a printed circuit board or a feeling of head. He also used the same cartridges, so my XL series would be used later once provided with the new printer cartridges are consumed. I took that offer and hope to have a new printer from Tuesday. So I'm glad HP service.

• I put four new ink cartridges, now the photos are drops with ink, literally dripping.

  My ink was low, so I put four new cartridges in French - Photo, Cyan, Magenta, yellow.  Using HP Advanced Glossy Photo paper, and photos are drops with ink.  Please notify.

  Four new ink cartridges caused my photos to drip with ink.

• New ink cartridges do not work

  I inherited a printer HP Deskjet 3070, which has already been used. I bought new ink cartridges, but when trying to install these has received the error message that I need to use the cartridges of the establishment to assess the ink levels and once this is done can change for the new cartridges.

  Unfortunately, the printer cartridges comes with do not seem to be setting up those and now the printer accept the original or the new.

  Does anyone know how I can go forward - it doesn't seem to be any problem with the printer?

  Hi @LorieB,

  Welcome to the HP Forums!

  I see that your new ink cartridges do not work with your HP Deskjet 3070. I'm happy to help with this problem!

  I would like to recommend please call our telephone support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• my habit of nx1300 epson print more help, I just put 1 new ink cartridges, and then I put in all 4 still not working

  I just put 1 new ink cartridges, then I put total 4 still does not work

  Hi mimi,

  Please contact Epson technical support for assistance: http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp.

  Good luck!

  Kosh

• Epson sx438w does not recognize the new ink cartridge

  Epson sx438w does not recognize the new ink cartridge, when change original are

  Contact Epson.  This isn't a problem of Windows or Microsoft.  They should be able to help or offer troubleshooting instructions.

• HP Photosmart C6280 prints not Magenta or Light Magenta even with new ink cartridges.

  Our HP Photosmart C6280 has always produced excellent results, but all of a sudden it won't print Magenta or Light Magenta, although they show of 75%.  We even tried to put in new ink cartridges, but they still does not print.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  HP - Photosmart C6280 - Product Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Photosmart C6280<- set="" to="" your="" version="" of="" windows="" for="" the="" proper="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  These might help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• LaserJet 1150: Laserjet 1150 problems after you insert the new ink cartridge

  Hi, I am the owner of this very good printer for 10 years now.  Used only a single all these years ink cartridge (I use it only for work related missionery) with not a single problem.  When we bought it we also bought a replacement ink cartridge.  However, when I put in place the new ink cartridge, I have a problem of printing documents.  Each document gives me the same results.  I took it to the store of the local computer, which shook the cartrdige vigorously and I also ran the service option in the HP printer Toolbox. The guy at the computer said I need to print a lot of papers and see what is happening... what I did.  But the result in each impression remains exactly the same. The annex in the printed document.  Can we still do this ink cartridge work after having been stored for 10 years?  Thank you for reading my message.

  You have a bad toner cartridge.  Given that this printer is very old, there is a lot new in the old box of cartridges of toner there stock.  Over time, the wiper blade will hurt comes from there.  Think that buy you a new toner from a big box store which should have new actions and you will come back if the cartridge is bad.

• Pro LaserJet M1212 nf mfp: Pro LaserJet M1212 nf mfp new ink cartridge prints on the desktop, but is no longer in the laptop!

  My printer is on a network home, connected as follows: desktop computer (USB); laptop (wifi).  I installed a new toner cartridge (secondary market) to replace an empty ink cartridge (secondary market).  Printer initialized and started on 'ready'  No error message.  A sheet of test sent my desktop prints fine, but my laptop refuses to print.  I have re-installed the latest version of the HP printer software/driver, printing and Scan Doctor (P & SD), which States that I have an error "printer."  I re - run P & SD several times, and at one point, a pageprinted test, but now nothing.

  Solved!

  Turns out that my installation of a new toner cartridge somehow missed to the top of my firmware, which reset the IP that my phone listed for my router.  So, I restarted the printer default, then re-installed the printer on my laptop and desktop with the latest firmware.  I needed to set the IP address - type it manually in the portable installation wizard - because the laptop kept one IP incorrect broadcast by my router, (which is meaningless, but there you have it).  Thanks to Sam in Calcutta.

  Desktop or laptop work fine, now.

• We have a printer All - in 6110 and very slow to print. a page in 30 min. new ink cartridge.

  We have the all in one 6110 and now its very slow print new ink cartridge and the downloaded drivers but it shows only a page in 20 to 30 min. is not a difference in color or black and white.

  Help, please.

  This is caused by the failure of one of your cartridges.  I don't know if supports Officejet 6110 print reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Photosmart C4640 installation of new ink cartridges

  In the past, I usually install the multi package (black and color) in the machine when it runs.  Once I installed only the color cartridge (because the black cartridge is still a lot of ink in there) and the printer will not accept the new color cartridge.  So I took the totally black cartridge and installed a new color and a black cartridge and then I managed to move forward with my impression.  My question is - is it normal to have to replace BOTH cartridges when one needs to be replaced?  It would be cheaper to replace only the color cartridge... the twin color and black package usually runs about $40.00!  Is there an alternative to a $40.00 a pop!  I use my printer.

  Hi @ted48,

  Welcome to the HP Forums!

  I noticed that you were unable to continue to print unless you have replaced both cartridges instead of with your HP Photosmart c4640. I'm sorry to hear that, but I'm happy to see it for you!

  This is definitely not normal for this printer, you need to replace both cartridges. It is a possible sign of a hardware problem.

  In the meantime, I recommend this guide, a "cartridge problem', 'has no cartridge", or "Incompatible cartridge" Error Message is displayed on the computer.

  I hope this information helps!

• Fax without new ink cartridges

  I'm on the phone w/hp support. My problem is that I rarely use my photosmart C6180 for anything other than printing in black and white or the TRANSMISSION of faxes. Support tells me that I still need new ink cartridges for the TRANSMISSION of faxes! Given that this unit was again I've never used the color option. This seems to be nothing more than a scam to sell ink cartridges. No fax machine I've never previously owned had need ink to send a fax. Can I override the default cartridge replacement? This has left a very bad impression of HP with me, and the pain of implementing this account to send this email did not help either. What happened to send a simple message to their topic How to pee, I am at this point? If I can't solve this problem without them charge me because she's been out of warranty will certainly play a huge role in my next purchase.

  I'm sorry that you are experiencing this issue. Your printer does not work without all the cartridges inside the printer. When the cartridges are empty, the printer won't boot.

  You will need to replace the cartridges before you can send faxes.