LaserJet 1150: Laserjet 1150 problems after you insert the new ink cartridge

Similar Questions

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Need help after you insert the CMS system

  Hi on my site ive inserted a system of Cushy CMS. It all work that is not the problem. The problem is that my page is a mess now... The only thing ive addes is a code cms so im hoping that the solution is not difficult to do.

  There are three pages what is changed full.

  The home page

  http://www.vakantiewoningeninsuriname.nl/index.html

  The text column to the right is less moved. How is it possible to place this back?

  on http://www.Dorff.nl/ you can see how it was before I add the CMS.

  The next page is:

  http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html

  You can see that there is much more space between the head and the text. And you see that the text is not only the anymmore on the right side.

  This is how it should be:

  http://www.Dorff.nl/bezienswaardighedenparamaribo.html

  It goes the same for this page:

  http://www.vakantiewoningeninsuriname.nl/Prijzen.html

  And that's how what it takes:

  http://www.Dorff.nl/Prijzen.html

  Hope you can help, thank you for the research...

  Kind regards Brian

  braico wrote:

  Dear Jacqueline,

  Thank you for your reply,

  I'll try to explain again what is wrong. On my website, you see this page:

  http://www.vakantiewoningeninsuriname.nl/Prijzen.html

  Problem is the image below on the right side of the page instead of the left like the other pictures.

  On:

  http://www.Dorff.nl/Prijzen.html

  You can see what it should look like... Photos to the left and the text on the right. I don't know what happened when im adding the Cuschy CMS. Hope you can see what the problem is.

  You have the two last property on the wrapped page entries in the

  "one_half_last" when that

  must encapsulate the entry of details of each property individually. That is why the last image is more to the right.

  What I would do is remove the entries of two last property (images and text) on the page, copy the code from the entrance of the two property then paste it under twice, making your entries in four properties. Of course, you need to update images and details of the property as well.

  OR if you're good with the code alters entered two details latest properties are isloated in their own "one_half_last".

• Calibrate display problems after you run the screen.

  I have a bad problem after running a screen calibrate a Spyder 3 Pro.  I've done this before and no problem, but this time, something went AWOL.  Now I have serious problems with the screen areas header and the context in which the Dock are black?

  The icon screen titles are also black text and it is impossible to see what emails are present because it is also black.

  My screen is a NEC PA272 and I tried to reset this sequel to the problem of calibration but no joy.

  In system Pref NEC display is no longer recognized it be some generic shown screen and the profile seems to be lost.

  In Safe Mode the dock is not black.

  I ran an OSX Yosemite recovery, but this does not seem to have changed anything.

  Can not think of anything else to try contacting Apple Support cat but it was difficult in these conditions and I fell the cat.

  It's weird since it's only a part of the screen with a problem, and the rest is OK.  I don't have a screen to swap to isolate the problem but everything worked fine before.

  Any ideas would be greatly appreciated, thanks in advance.

  

  

  Excellent assistance from the Apple phone is supported, problem solved.

• HP LaserJet P1102 CE651A does not recognize the new toner cartridge

  I installed a new hp for my Laserjet P1102 toner cartridge, but still get the message "install the black print cartridge"and the orange light blinks.  It worked fine until the toner ran out.  Have tried to reinstall the cartridge and you are using a compatible cartridge, without success.  Can I do, or do I have to repair the printer that appears to be a case to send far from a reconditioned unit?  I am disappointed that he didn't after intermittent use of less than 18 months. It was purchased as the reviews said it would be great for printing of volume, but I have not at this stage yet.

  Any ideas?

  I had the same problem. Remove all paper from the tray. Make sure that no paper is started in the printer. I then replaced the toner cartridge and it was recognized. It seems that if the paper is launched to feed into the printer, then the new toner is not recognized.

• After you download the new version of firefox, I didn't like it and tried to restore my system to an earlier time and version of firefox. Now that firefox does not open, even the old version isn't there more.

  I want to get firefox, keeping all bookmarks.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• After you add the new toolbar after clicking on the fact, made new TB cases disappear. Has worked w / all the worms. FF so far.

  I got a toolbar additional ((àle total de 3 personnalisé ajouté deles de barres d'outils) that was just too much to place & need 2 remove it.) No option to remove the toolbar named singularly, only option available was 2 toolbar reset, I did & began to build again once I added called "weather", he created & defining the space available, but after I hit 'complete' on customize toolbar, he disappeared. Find that I am unable to create and maintain new toolbars to help customize the toolbar. This is the first I have reset my toolbar and found this problem.

  Have you done something to the new toolbar before you clicked Add? Empty custom toolbars are removed automatically.

• Issue after you create the new partition, Bootcamp expansion

  Hello

  I hope someone can help with a problem I'm having.

  I found an old Apple discussion on how to resize a partition, bootcamp, by reducing the size of the OS X partition, then using a Windows based tool to then extend the Bootcamp partition. Big mistake! I'm done with the same problem as the creator of this thread with my Windows no longer bootable partition.

  I followed the steps described by lonely T, which worked perfectly! Thank you very much!

  Then, I went into Windows and use the Partition Mini tool to extend the Windows partition in the unallocated partition, which worked fine in Windows.

  However when I boot in OS X and open disk utility I see now 3 separate partitions. (1) mac HD. ((2) Untitled (the one I created) 3) Windows HD (Bootcamp). Then OS X is not recognizing that I extended the Windows HD partition in the Untitled one.

  Is there a way to solve this problem without ruining it now expanded Windows partition? Windows does not seem to see two separate partitions, only in OS X I downloaded GPT Fdisk

  Thanks in advance!

  Output below:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 121.0 GB disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage Macintosh HD 637,5 GB disk1s2

  3: disk1s3 Apple_Boot Recovery 650,1 MB HD

  4: Apple_HFS 173,7 GB disk1s4

  5: Microsoft Windows HD 188.0 GB disk1s5 data base

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 750.0 GB disk2

  Logical volume on disk0s2, disk1s2

  D3F5913D-0A32-4BE8-BD44-A65885746DA0

  Fusion unencrypted drive

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.5 to disk3

  1: EFI EFI 209.7 MB disk3s1

  disk3s2 2: Apple_HFS My Book Studio has 1.5 TB

  / dev/disk4 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.5 to disk4

  1: EFI EFI 209.7 MB disk4s1

  2: Apple_HFS My Book Studio B 1.5 TB disk4s2

  Cs diskutil list

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 23846179-0CBE-42F5-A375-0D969F4C789E

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 758507479040 B (758.5 GB)

  Free space: 229376 B (229.4 KB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 637518626816 B (637.5 GB)

  |

  + -> 41CF6816-F84F-4D76-A6FD-97288E448BF7 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume D3F5913D-0A32-4BE8-BD44-A65885746DA0

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 749999882240 B (750.0 GB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  sudo TPG - vv - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 236978175

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 236306352 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  236715992 262144 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  236978136 7

  236978143 32 table dry GPT

  236978175 1 dry GPT header

  sudo TPG - vv - r see the/dev/disk1

  See the TPG: / dev/disk1: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk1: MBR suspicious to sector 0

  See the TPG: / dev/disk1: Pri GPT to sector 1

  See the TPG: error: wrong card

  See the TPG: could not open device ' / dev/disk1 ': Undefined error: 0

  sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  sudo fdisk/dev/disk1

  Disk: geometry / dev/disk1: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639]

  2: AF 25 127 15 - 1023 254 63 [409640-1245153568] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1245563208-1269760]

  * 04:07 1023 254 63-1023 254 63 [1246834688-706689024] HPFS/QNX / TO THE

  Did you install GPT Fdisk as described in Re: can not start windows after resizing partitions ? If so, can you post the output of 'p' command of Gdisk?

• Issue of SDRS to vCloud Director after you add the new data store to the Cluster of DTS

  Hi people,

  We use vCloud Director 5.5 in a vSphere full 5.5 environment.

  We have several DTS Cluster in vSphere and connected to vCloud Director.

  Following problem.

  When I add a data store to a Cluster of DTS and connect this to the corresponding storage profile data store, the storage profile is not available to vCloud Director more.

  After removing the new store data in the cluster of DTS, the profile becomes available again.

  Any ideas?

  Concerning

  Jean

  How did you the storage profile associated with the data store?  via c# client or vSphere web client?

  If you did the wrong way (c#) there no storage class label appropriate against it.

  A data cluster store has the storage class who would have all preparations of data contained inside.

  I think that you should check the service class is associated properly in vSphere web client (before adding to the DS Cluster).  Once it displays correctly, and then add the data store to the cluster.

• Battery blackBerry 10 same problem after updating to the new operating system 10.3.2.2836

  Got new software update for z10 10.3.2.2474 to 10.3.2.2836.But battery problem, it's always a problem. Phone stops automatically, handles upward, battery level is decreased in heavy quantity. This update was not helpful. They help to Blackberry!

  I would like to give two or three days the phone syncs with the new OS. You need to reset hard your Z10 in this way: to connect the wall charger and when it is turned on, remove the battery for 20 minutes and reinsert. He'll recover incorrect battery meter. You may need to do this reset in 1-2 days.

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

• After you disable the new interface to tabs, all new documents are not open in a larger window

  Hello

  Yesterday I upgrade my Adobe 11.0.10 Adobe Acrobat Reader DC 15.010.20056 player. The tabs interface was pleasant enough, but there are still some limitations with this features, such as,.

  1 > no option to set no maximum. tabs in a single window,

  2 > tabs cannot organize, to be moved to a new window and several selected

  I want to disable the new interface to tabs via Preferences > General > open documents in the new tab in the same window (not checked), but after you turn off the new tabbed interface, all new documents open after the first document are not open in a maximized window, they always opened in a restored window.

  No matter what I do, it keeps - on the opening of the second new pdf in this one, restored windows are the things that I tried to overcome this.

  1 > right of the DC open Adobe Acrobat click in the task bar > Adobe Reader DC > right click > properties > run: enlarged - only the first document opened in maximized windows, documents later opened in the restored only, window that too seem to not work when I closed the last document in a restored window. Opening in the same window type is part of the windows operating system, it does all the time, "opens the entire application in the same way that they have been closed, either maximized/restored and the size of Windows too". Only the first one application window is open in this way, rest of the windows open is seems to be not supported by the operating system.

  2 > of this forum discussion https://forums.adobe.com/thread/435552?start=0 & tstart = 0 , I checked for the mentioned, registry keys

  HKEY_CURRENT_USER\SOFTWARE\Adobe\Acrobat Reader\DC\SDI

  the default value is - "bNullDocMaximized" = DWORD: 00000001 , "bMaximizeNextDocument" = DWORD: 00000001 and "bResizeOnOpen" = DWORD: 00000000

  Exchange only tried on the third button (the rest has been preset to required values) - "bResizeOnOpen" = dword: 00000001 - restart > no change > reset to its default value

  What to do now...?

  Thanks in advance

  Hi Gangatharran,

  Thank you for bringing this to our notice.

  We have recorded a bug for this and will share an update on the progress made in this thread.

  Kind regards
  Rave

• Windows does not restart after you install the new hard drive.

  Hi, I upgraded from 100 gig 250 gig drive hard nice clean installation, worked perfect. Turn off the laptop, turn back on and only bios are accessible, without window, just a black screen with a small white bar flashing at the top of the screen. Put old drive in, everything works fine and in disk management the new shows drive but are not accessible? Anyone got a clue?

  Now I found the answer to my problem. Acer Aspire9802 WKMI recovery allows only 32 GB max loading mbr, therefore partitioned readers with a free majorgeeks.com partitioner and ye he

  The free program, I called EASUS PARTITION MASTER, dead easy to use for a novice like me! and with an instruction book complete in pdf format

  every 4 years, 21 '' screen singin' and laptop dance - now considered to be old!

  I guess if the sata drive is the same sata version as controller on your laptop, that's to say sata 1 or 2 or 3
  And if a later version of the sata it's backward compatible?

  Use the utility disk provided by the manufacturer of the drive check