I can't back up my computer. I have

Similar Questions

• my child has changed my windows password and I can't get into my computer, I have xp sp3

  my child has changed my windows password and I can't get into my computer, I have windows xp sp3.

  Hi JENNHPL,

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  If the article above does not help then refer the article about Microsoft policy on forgotten passwords

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• I can not back up my computer, or use Windows Proformances system check

  When I try to back up my computer or let windows create a system image and save, it will only create the system image and I just get an error message, I think this all started when I started having problems with my (say unavailable event log)

  Hi Frederic,.

  Write to us with the following information.

  (1) what is the accurate/complete you get error when you try to perform a system image?
  (2) that monitor performance of the system do you want to?

  (3) do you have any third-party security software or antivirus installed on your computer?

  (4) did the problem started recently?

  (5) as 'use of Windows System performance check' what are you referring?

  (6) are you referring to any utility troubleshooting? If so, then what convenience store?

  You can follow the links below.

  Backup and restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/backup-and-restore

  What is a system image?

  http://Windows.Microsoft.com/en-in/Windows7/what-is-a-system-image

  Write the asked information. We will help you to come.

• I can't back up my computer on a disc?

  It is said to back up to disk so under him, he said network I choose the disk and arrow down and he says discount so I click it and it flashes to witch network is nothing I need to enable something or am I hurt thanks ibjeffur

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  To try to fix the problem if possible:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I CAN NOT BACK - UP MY COMPUTER, I GET A CODE OX810000ED AND I do not KNOW HOW TO follow up AND the CORRECTION of THE PROBLEM, THINK YOU. John

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • errow message 0x810000ed
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
   
  1 are you using the backup and Restore Center or any other tool to save the files?
  2. when exactly you get this error code? It's when you launch the tool, or when executing backup?
   
  We have checked for the error code you provided and not found any information about it. We recommend that you check the error code to see if it is correct. Many users have fixed the problems of file backup by following these steps.
   
  Step 1: Check the status of dependent services backup.
  1. Click Start, type services.msc and press to enter.
  2. from the list of components, double-click Backup Windows and Volume shadow copy services.
  3. make sure that the startup type is automatic and the services are started.
  4. apply the settings.
   
  Step 2: Check the hard drive in order to correct mistakes.
  1. Click Start, type cmd, right-click cmd, and then click Run as administrator.
  2. at the prompt, type chkdsk /f /r and press to enter.
  3. once the scan is complete, close the window.
   
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors
   
  Step 3: Start the backup.
  1. click on Start, backup and restore, the list right click on backup and restore, then click on run as administrator.
  2. try to create a backup and verify the result.
   
  Post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How can I back up my computer before installing windows 7. Thank you

  will be the version upgrade of windows 7 automatically back up my files before starting. Me seems to have two different methods and I don, t really follow iether one.

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I back up my computer, and then delete the unused programs to speed up my computer

  would need a guide step by step for me to do it properly.

  PML had to jump into a second :)

  go to start, Control Panel, add/remove programs, wait to fill the list, and then to the right, choose Delete to any program you don't want, after the withdrawal if he is not asked to restart, then restart the pc.

• I can not scan from my computer, I have to use the scanner, printing device how to solve?

  I have a HP Officejet 6700.

  After installing windows update the option of scanning/printing, etc... my computer has been deleted. I can scan/print directly from my printer. I uninstalled the software, reinstalled from the disk. I tried to go online to update the software and drivers, but he always tells me that these files are corupt. Help, please?

  Download and install the drivers and the latest software recommended full on the website of HP.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5058338

  What happens to the anti-virus do you use when you get the corrupted message?

• Backing up your computer (windows 7) without using windows backup

  My external hard drive Seagate Expansion 2 to would not back up my w 7 64 b machine using the standard windows backup feature.  So in my taskbar, the notification icon shows as "not saved"... With the help of a tool of downloading the software "EaseUS Todo" I backed up my computer.  Have I not an image of the system?  Using the free software I have to manually back up.  What should I know about this situation?  How to partition saved whats and new hard disk space, that I need to use? Any help from Microsoft would be a most appreciated.

  Nightdriver

  Their web site;

  Free and reliable data backup and system disaster recovery for users software. It allows users to right-click to save system and restore it to the original state when disaster happens and performs the backup incremental and full schedule to save time and avoid trouble.

  Since it is a third-party utility, see their help/support pages http://www.todo-backup.com/support/

  If you want to keep the data on this disk partition you must use a third-party partitioning tool

• You can back up your computer once you have restored it?

  You can back up your computer once you have restored it?

  Hello

  Yes, you can SAVE any time according to your need. You can do a full backup and an incremental backup (daily/weekly/monthly...) after that.

  Kind regards.

• I can't back up my files via network to another computer, both using Vista

  Using the Backup Wizard, the ability to back up by using network is disabled (can not click on the button). I'm running Vista Home Basic, the other computer on the network is on Home Premium. The network works very well in every other respect, etc. file sharing.

  Hi peter_849,

  Windows Vista Home Basic Edition supports backup on a network location. It can only back up to a local disk.

  To work around the problem, you can try to backup locally, and then copy the backup on another machine on the network.

  For more information, see the link:

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Hope this information is useful.

• I have the product key on the back of my computer toshiba laptop but still get a message that windows 7 is not genuine, what can I do?

  My son bought this laptop Toshiba Satellite with windows 7 ultimate and gave our grandchildren for Christmas two years ago. They never used so it brought and I got from my son. On startup, I get a message that windows is not genuine. I've repeatedly tried to activate with the product key on the label of MS on the back of the computer laptop, but message still there. I noticed the first time I tried to enter the product key, there was a different product key in the input fields. I have entered the correct product key but message still there.
  Can someone please help?  Thank you for your time.

  Hello

  I would say allowing you to run the Microsoft Genuine Diagnostics tool then copy and paste the results into an answer here for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Also I suggest you to check your product key and report to Microsoft about the issue.

  Check out the following link to report to Microsoft.

  https://www.Microsoft.com/en-us/howtotell/CFR/report.aspx

• I removed my whole OS on an external device, what can I do to get back on my computer?

  original title: HELP

  I removed my whole OS on an external device, what can I do to get back on my computer?

  What is the make and model computer you have?

  I suggest that you try to contact the manufacturer of your computer and ask a set of recovery disks will be sent to reinstall Windows 7.

• How can I determine how many records I need to back up my computer?

  I tried to back up my computer, but I kept needing to insert new disks and ran out of records before the end of the backup. Now the discs I used are full and I can't reuse :>(

  The best thing to do would be to invest in an external hard drive, you can simply plug into a USB port and never have to work with backup discs.  1 TB drives are around $ 85 and would be ideal for your needs.  I also recommend that you do not use the Windows backup program provided.  Use instead something like Norton Ghost, Easeus Todo Backup or Memeo.

  CNET has a lot of reviews of backup program to

  http://download.cnet.com/windows/backup-software/?tag=contentBody;sideBar .

  Some of them are free (the last time I checked there over 300), some have free trials (more), and some are buying only (more than 200).

  -

  Good luck.

• I had to reset my computer and now I have to reload everything on my computer. I tried to download it but I can't.  How do I get Acrobat Pro XI back on my computer?

  I had to reset my computer and now I have to reload everything on my computer. I tried to download it but I can't.  How do I get Acrobat Pro XI back on my computer?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq